ANNUAL BOOK oF ~~ ASTM STANDARDS

. .

Construction

Revision issued annually

1 ANNUAL BOOK OF ASTM STANDARDS

Listed by Subjects

SUBJECT VOLUME

Acoustics, Environmental . . . . . . . . . . . . . . . . . . . . . 04.06 Activated Carbon ........ •. ........ • -. . . . . . . . . 15.01 Adhesives . ..... ... ..... .......... '. . . . . . . . . . 15.06 Advanced Ceramics .......................... 15.01 Aerosols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.09 Aerospace Industry Methods . .... . .... . ........ 15.03 Aggregates ............................... -. -, 04.02 Aluminum and Aluminum Alloys . . . . . . . . . . . . . . 02.02 Amusement Rides and Devices . . . . . . . . . . . . . . . . 15.07 Analytical Atomic Spectroscopy . . . . . . . . . . . 03.05, 03.06 Anesthetic and Respiratory Equipment . . . . . . . . . . 13.01 Appearance of Materials . . . . . . . . . . . . . . . . . . . . . . 06.01 Aromatic Hydrocarbons and Related

Chemicals ............ , . . . . . . . . . . . . . . . 06.04 Atmospheric Analysis .... , . . . . . . . . . . . . . . . . . . . 11.03 Biological Effects and Environmental Fate . . . . . . . 11.04 Biotechnology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.04 Bituminous Materials . . . . . . . . . . . . . . . . . . . . . . . . 04.03 Building Constructions .................... , . . 04.07 Building Seals and Sealants . . . . . . . . . . . . . . . . . . . . 04.07 BusineM Imaging Products . . . . . . . . . . . . . . . . . . . . 15.09 Carbon Black .......... .. ......... . ......... 09.01 Carbon Products, Manufactured .... .. ... . .. .. .. 15.01 Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.02 Catalysts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05.03 Cellulose ...... .............. . .. , . , . . . . . . . . . . 06.02

r ·r „ ' l Cement .............................. ·. . . . . . 04.01

Hydraulic ... ..... . .. ............ ..... ... . 04.01 Rubber .............. . ................ ... 09.01

Ceramic Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.02 Advanced Ceramics .. . ... . .. .. ... .. .. ...... 15.01 Ceramic Whitewares . . . . . . . . . . . . . . . . . . . . . . . 15.02 Ceramics for Electronics . . . . . . . . . . . . . . . 10.04, 15.02 Porcelain Enamel . . . . . . . . . . . . . . . . . . . . . . . . . . 02.05

Chemical Analysis of Metals . . . . . . . . . . . . . . 03.05, 03.06 Chemical-Resistant Nonmetallic Materials . . . . . . . 04.05 Chemicals, Industrial . . . . . . . . . . . . . . . . . . . . . . . . . 15.05 Chromatography . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.02 Oosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.09 Coa1 and Coke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05.05 Compatibility and Sensitivity of Materials in Oxy-

gen-Enriched Atmospheres . . . . . . . . . . . . . . 14.02 Computerization of Material Property Data . . . . . . 14.01 Computerized Systems . . . . . . . . . . . . . . . . . . . . . . . 14.01 Concrete and Concrete Aggregates . . . . . . . . . . . . . . 04.02 Concrete Pipe and Tile . . . . . . . . . . . . . . . . . . . . . . . 04.05 Concrete Products, Precast . . . . . . . . . . . . . . . . . . . . 04.05 Concrete Reinforcing Steel . . . . . . . . . . . . . . . . . . . . 01.04 Consumer Products . . . . . . . . . . . . . . . . . . . . . . . . . . 15.07 Containers:

Aerosol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.09

viii

SUBJECT VOLUME

Glass ..... ... . , ... . 1. . . . . . . • • • • . • . . . . • • . . 15.02 Shipping . . . 1 • • •••••• ••••• •• • • • • • • • • • • • • • • • 15.09

Coolants, Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.05 Copper and Copper Alloys •... . .. ·. . . . . . . . . . . . . 02.01 Corrosion, Metal .. , ............ • . „ ••... , • . . • 03.02 Criteria for the Evaluation of Testing and lnspection

Agencies . . . . . . . . . . . . . . . . . . . . • . . . . . . . . 14.02 Detention and Correctional Facilities . . . . . . . . . . . . 04.07 Die-Cast Metals ........... .... .... 02.01, 02.02, 02.04 Dimension Stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04.07 Dosimetry . . ...... . ..... .. , . . . . . . . . . . . . . . . . 12.02 Ductile Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.02 Durability of Nonmetallic Materials:

General Practices .... ........... ...... , . : . . 06.01 Pipeline Coatings .... .. „ . . . . . . . . • . . . . . . . . . 06.02 .

Electrical Conductors . . . . . . . . . . . . . . . . . . . . . . . . 02.03 Electrical Contacts and Connectors . . . . . . . . . . . . . 03.04 Electrical Insulating Materials . . . . . . . 10.01, 10.02, 10.03 Electrical Protective Equipment for Workers . . . . . . 10.03 Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.04, 10.05 Emergency Medical Services .... ..... . .. . ...... 13.01 Emission Spectroscopy·. . . . . . . . . . . . . . . . . . . 03.05, 03.06 Environmental Assessment . . . . . . . . . . . . . . . . . . . . 11.04 Erosion and Wear . . . . . . . . . . . . . . . . . . • . . . . . . . . 03.02 Evaluating Testing and lnspection Agencies . . . . . . 14.02 Exposure Tests . ... . •.......• . , , . . . . . . . . . . . . . 14.02 Fasteners . .... .. ... ... .... .. .. ... ..... . : . . . 15.08 Fatigue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • 03.01 Fences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.06 Ferroalloys . . . .................. . .... , . . . . . . 01.02 Ferrous Castings ...... , . . . . . . . . . . . . . . . . . . . . . 01.02 Fiber-Cement Products . . . . . . . . . . . . . . . . . . . . . . . 04.05 Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.02 Fire Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04.07 Flexible Barrier Materials . . .......... , . . . . . . . . 15.09 Food Service Equipment .. ..... ... „.......... 15.07 Footwear, Safety and Traction for . . . . . . . . . . . . . . 15.07 Forensic Sciences .. ............. . . , . . . . . . . . . . 14.02 Fracture Testing .. .. .. ... . . . .. . ..... , . . . . . . . . 03.01 Gaseous Fuels ................. ... .. : . . . . . . . 05.05 Gaskets ..... ......... ....... ....... .... .... 09.02 Geotextiles and Related Products . . . . . . . . . . . . . . . 04.09 Geothermal Resources and Energy . . . . . . . . . . . . . . 12.02 Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.02 Graphite Products, Manufactured . . . . . . . . . . . . . . 15.01 Graphite Products, Nuclear . . . . . . . . . . . . . . . . . . . 12.02 Gypsum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04.01 Halogenated Organic Solvents . . . . . . . . . . . . . . . . . 15.05 Hazardous Substances and Oil Spill Response . . . . 11.04 Hazard Potential of Chemicals . . . . . . . . . . . . . . . . . 14.02 · Health Care Services and Equipment . . . . . . . . . . . . 13.01

LISTED BY SUBJECTS

SUBJECT VOLUME

High Modulus Fibers and Composites ........... 15.03 Imaging Products, Business . . . . . . . . . . . . . . . . . . . . 15.09 Index (for all volumes) . . . . . . . . . . . . . . . . . . . . . . . 00.01 Industrial Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . 15.05 lron Castings ..... , ................... , . . . . . 01.02 K.nock Test Manual . . . . . . . . . . . . . . . . . . . . . . . . . 05.04 Laboratory Apparatus ........................ 14.02 Leather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.04 Lime ...................................... 04.01 Magnesium and Magnesium Alloys . . . . . . . . . . . . . 02.02 Magnetic Properties . . . . . . . . . . . . . . . . . . . . . . . . . . 03.04 Malleable lron ........... , . . . . . . . . . . . . . . . . . . 01.02 Masonry Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04.05 Meat and Poultry ............. , ........ ,..... 15.07 Medical and Surgical Materials and Devices . . . . . . 13.01 Metallic and Inorganic Coatings .... _ . . . . . . . . . . . 02.05 Metallography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03.01 Metal Powders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02.05 Metals, Chemical Analysis . . . . . . . . . . . . . . . . 03.05, 03.06 Metals, Effect of Temperature on Properties ...... 03.01 Metals, Physical and Mechanical Testing. . . . . . . . . 03.01 Metric Practice ............. . „ . . . . . . . . . . . . . . . 14.02 Mortars for Unit Masonry ..... 4 • • • • • • • • • • • • • • 04.05 Naval Stores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06.03 Nickel and Nickel Alloys . . . . . . . . . . . . . . . . . . . . . 02.04 Nondestructive Testing . . . . . . . . . . . . . . . . . . . . . . . 03.03 Nonferrous Metals, General . . . . . . . . . . . . . . . . . . . 02.04 Nonmetals, General Test Methods . . . . . . . . . . . . . . 14.02 Nuclear Materials . . . . . . . . . . . . . . . . . . . . . . 12.01, 12.02 Occupational Health and Safety . . . . . . . . . . . . . . . . 11.03 Oil Spill Response, Hazardous Substances . . . . . . . . 11.04 Ores, Metal Bearing, Sampling and Analysis . 03.05, 03.06 Orthotics, Extemal Prosthetics, and Mobility

Aids .................. • . ........ '.... 13.01 · Packaging .................................. 15.09

Paint and Related Coatings and Materials: Pigments, Resins, and Polymers . . . . . . . . . . . . . . 06.03 Products and Applications ·~· . . . . . . . . . . . . • . . . 06.02 Solvents , ........... , . . . . . . . . . . . . . . . . . . . . .06.04 Tests for Chemical, Physical, and Optical Proper-

ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06.01 Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.09 Pavement Management Technologies . . . . . . . . . . . 04.03 Particle Size Measurement . . . . . . . . . . . . . . . . . . . . 14.02 Pesticides . . . . . . . . . . • . . . . . . . . . . . . . . . . . . • . . . . 11.04 Petroleum Products and Lubricants ............. 05.01,

05.02, 05.03, 05.04 Plastics ............ . ............ . 08.01, 08.02, 08.03 Plastic Pipe and Building Products ... . .......... 08.04 Polishes ................. , . . . . . . . . . . . . . . . . . 15.04 Porcelain Enamel ...... , ... , . . . . . . . . . . . . . . . . . 02.05 Pressure Vessel Plate and Forgings. . . . . . . . . . . . . . 01.04 Products Liability Litigation, Tecbnical

Aspects of. , .. . . . . . . . . . . . . . . . . . . . . . . . . 14.02 Protective Clothing . . . . . . . . . . . . . . . . . . . . . . . . . . 11.03 Protective Coating and Lining W ork for Power

Generation Facilities . . . . . . . . . . . . . . . 06.02, 12.01 Protective Equipment, Electrical, for Workers .. . . . 10.03 Radioisotopes and Radiatjon Effects . . . . . . . . . . . . 12.02

ix

SUBJECT VOLUME

Reactive and Refractory Metals . . . . . . . . . . . . . . . . 02.04 Refractories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.01 Resilient Floor Coverings . . . . . . . . . . . . . . . . . . . . . 15.04 Resource Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . 11.04 Road and Paving Materials . . . . . . . . . . . . . . . . . . . . 04.03 Robotics ................................... 14.01 Roofing, Waterproofing, and Bituminous

Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04.04 Rubber . ............................... 09.01, 09.02 Search and Rescue . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.01 Security Systems and Equipment . . . . . . . . . . . . . . . 15.07 Sensory Evaluation of Materials and Products . . . . 15.07 Shipbuilding . ...... . „ „ ... „ ...••..• „ „ . . . 01.07 Sintered P /M Structural Parts . . . • . . . . . . . . . . . . . . 02.05 Skiing, Snow ...... , . . . . . . . . . . . . . . . . . . . . . . . . 15.07 Soap ...................................... 15.04 Soil and Rock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04.08 Solar EQergy Conversion ...................... 12.02 Solvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06.04 Space Simulation ............................ 15.03 Spectroscopy . . . . . . . . . . . . . . . . . . . . . • . . . . . . . . . . 03.06 Sports Equipment and Facilities .. . . . . . . . . . . • . . . 15.07 Statistical Methods ................... „. „.. 14.02 Steel:

Bars • . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.05 Bearing Steel . . . . . . . . . . . . . . . . . . . . • . . . . . • . . 01.05 Bolting .............................. 01.01, 15.08 Castings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.02 Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.05 Concrete Reinforcing . . . . . . . . . . . . . . . . . . . . . . . 01.04 Detention and Correctional Facilities . . . . . . . . . . 04.07 Fasteners ........................• . ... , . . 15.08 Forgings .. ........................... 01.04, 01.05 Galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.06 Piping, Tubing, and Fittings . . . . . . . . . . . . . . . . . 01.01 Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . 01.03 Pressure Vessel Plate and Forgings .... . . . . . . . . 01.04 Rails, Wheels, and Tires . . . . . . . . . . . . . . . . . . . . 01.04 Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.05 Stainless Steel ....... 01.01 , 01.02, 01.03, 01.04, 01.05 Structural Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . 01.04 Wire .................................... 01.03

Surface Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03.06 Surgical Materials and Devices . . . . . . . . . . . . . . . . . 13.01 Temperature Measurement .................... 14.03 Textiles .... ............•............... 07.01, 07.02 Thermal Measurements . . . . . . . . . . . . . . . . . . . . . . . 14.02 Thermal Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . 04.06 Thermocouples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.03 Thermostats, Electrical Heating and Resistance,

Contacts, and Connectors ............ , . . 03.04 Tires ...................................... 09.02 Traveled Surface Characteristics . . . . . . . . . . . . . . . . 04.03 Vacuum Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.07 Vitrified Clay Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . 04.05 Waste Management . . . . . . . . . . . . . . . . . . . . . . . . . . 11.04 Water ..................... ·. ·. . . . . . . . . . . 11.01, 11.02 Wear and Erosion . . . . . . . . . . . . . . . . . . . . . . . . . . . 03.02 Wood ..................................... 04.10

i Contents

1994 ANNUAL BOOK OF ASTM STANDARDS, VOLUME 04.06

THERMAL INSULATION; ENVIRONMENT AL ACOUSTICS

· A complete Subject Index begins on p. 933

Listed below are those standards included in this volume and those standards that have appeared previously that have been superseded or discontinued within the past three years. Since the standards in this book are arranged in alphanumeric sequence, no page numbers are given in this contents.

In the serial designations prefixed to the following titles, the number following the dash indicates the year of original adoption as standard or, in the case of revision, the year of last revision. Thus, standards adopted or revised during the year 1994 have as their final oumber, 94. A letter following this number indicates more than one revision during that year, that is. 94a indicates the second revision in 1994, 94b the third revision, etc. Standards that have been reapproved without change are indicated by the year of last reapproval in parentheses as part ofthe designation number, for example (1994). A superscript epsilon indicates an editorial change since the last revision or reapproval-E 1 for the first change, E2 for the second changc, etc.

C 163 - 88 (1993)EI §C 165-92 C 166- 87 (1992)EI

§C 167 - 93 c 168-90

§C 177 - 85 (1993)EI

§C 195-90 §C 196 - 93 §C 203-92 §C 208-94 §C 209-92 §C 236 - 89 (l993)EI c 240-91

§C 302 - 82 (l 989)EI c 303-90 c 335 -89 c 351-92b c 353 - 90 c 354-90 c 356 - 87 (1992)fl

C 367 - 78 (l989)EI c 383-90 C 384-90a

§C 390 - 79 (l 989)E1

C 405 - 82 (l 992)EI C 411 - 82 (1992)EI c 419 - 8'!(1990) c 421-88

§C 423-90a C 446 - 88 (l993)EI c 447 - 85 (1990)

§C 449/C 449M - 88 c 450-94

C 461 - 81 (1990)EI C 488 - 83 (l993)EI

§C 516-80(1990) §C 518-91

c .519- 84 c 520-91

Practice for Mixing Thermal Insulating Cement Samples Test Method for Measuring Compressive Properties of Thermal Insulations Test Method for Covering Capacity and Volume Change Upon Drying ofThermal Insulating Cement Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations Terminology Relating to Thermal Insulating Materials Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Propertics by Means of

the Guarded Hot Plate Apparatus Specification for Mineral Fiber Thermal Insulating Cement Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement Test Methods for Breaking Load and Flexural Properties ofBlock-Type Thermal lnsulation Specification for Insulating Board (Cellulosic Fiber), Structural and Decorative Test Methods for Cellulosic Fiber Insulating Board Test Method for Steady-State Thermal Performance ofBuilding Assemblies by Means ofa Guarded Hot Box Test Methods of Testing Cellular Glass lnsulation Block Test Method for Density of Preformed Pipe-Covering-Type Thermal lnsulation Test Method for Density of Preformed Block-Type Thermal Insulation Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation Test Method for Mean Specific Heat ofThermal lnsulation Test Method for Adhesion of Dried Thermal Insulating or Finishing Cement Test Method for Compressive Strength ofThermal Insulating or Finishing Cement Test Method for Linear Shrinkage of Preformed High-Temperature Thermal lnsulation Subjected to Soaking

Heat Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-in Ceiling Panels Test Method for Wet Adhesion of Thermal lnsulating Cements to Metal Test Method for Impedance and Absorption of Acoustical Materials by the lmpedance Tube Method Criteria for Sampling and Acceptance of Preformed Thermal Insulation Lots Practice for Estimating Consistency ofWet-Mixed Thermal lnsulating Cement Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation Practice for Making and Curing Test Specimens ofMastic Thermal Insulation Coatings Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation Test Method for Sound Absorption and Sound Absorption Cöefficients by the Reverberation Room Method Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes Practice for Estimating the ,Maximum Use Temperature ofThermal Insulations Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement Practice for Prefabrication and Field Fabrication ofThermal Insulating Fitting Covers for NPS Piping, Vessel

Lagging, and Dished Head Segments Test Methods for Mastics and Coatings Used with Thermal Insulation Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation Specification for Vermiculite Loose Fill Thermal lnsulation Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of

the Heat Flow Meter Apparatus Test Method for Density of Fibrous Loose-Fill Building Insulations Test Methods for Density of Granular Loose Fill Insulations

§ Consult the DoD Index of Speci~cations and Standards for the specific year of issue that has been adopted by the Department of Defense.

X

c t§C §C §C §C §C §C §C §C §C c

§C §C

§C §C c

§C

§C tC c c c

§C

c tC

c c c c c

§C c

. §C §C c c c c c

§C §C c c c c c c

§C §C c c c c

522 - 87 (1993)El 532- 88 533 - 85 (1990) 534- 94 547 - 77 (1993)El 549 - 81 (1986) 550-81 (1987)El 552-91 553-92 578- 92 585 -90

591 - 85 592- 80

610- 85 612 - 93 634- 89 635 -94

636-92El 640- 83 647- 89a 653- 92 656- 94a 665 - 91

667-92

677 - 89

680- 89

686- 90 687 - 93 692- 90

720- 89 726 - 93 727 - 90 728- 91 139-91 740 - 82 (1987) 745 - 92 755 - 85 (1990) 762-86 (1991) 764-94 795 - 92 800-94 835 - 82 (t988)H 846 -94 854-90 870 _, 77 ( l 992)El 871- 94

892-93 916- 85 (1990) 921 - 89 929- 94

930-92

945 - 81 (1993)

950 - 81 (1993)

CONTENTS

Test Method for Airflow Resistance of Acoustical Materials Specification for Structural Insulating Formboard (Cellulosic Fiber) {Discontinued 1993) Specification for Calcium Silicate Block and Pipe Thermal Insulation Specification for Preformed Aexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form Specification for Mineral Fiber Preformed Pipe Insulation Specification for Perlite Loose Fill Insulation Practice for Measuring Trueness and Squareness of Rigid Block Thermal Insulation Specification for Cellular Glass Thermal Insulation Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications Specification for Rigid, Cellular Polystyrene Thermal Insulation Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing

(NPS System) Specification for Unfaced Preformed Rigid Cellular Polyurethane Thermal Insulation Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered)

(lndustrial Type) Specification for Expanded Perlite Block and Pipe Thermal Insulation Specification for Mineral Fiber Block and Board Thermal Insulation Terminology Relating to Environmental Acoustics Specification for the Manufacture, Performance, and Testing of Meta! Suspension Systems for Acoustical

Tile and Lay-ln Panel Ceilings Practice for Installation of Meta! Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels Specification for Corkboard and Cork Pipe Thermal Insulation (Discontinued 1994) Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation Guide for Determination ofthe Thermal Resistance ofLow-Density Blanket-Type Mineral Fiber Insulation Specifü::ation· for Structural Insulating Board, Calcium Silicate Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured

Housing Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at

Temperatures Above Ambient Air Practice for Use ofa Polyethylene Terephthalate Reference Film for the Measurement ofthe Time-Averaged

Vapor Pressure in a Controlled Humidity Space (Discontinued 19~ · Practice for Determination of Heat Gain or Loss and the Surfaele Temperatures of Insulated Pipe and

Equipment Systems by the Use of a Computer Program Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation Practice for Determination Of Thermal Resistance of Loose-Fill Building Insulation TeSt Method for Evaluating the Influence ofThermal Insulations on the Extemal Stress Corrosion Cracking

Tendency of Austenitic Steel Specification for Spray-Applied Fibrous Thermal Insulation for Elevated Temperature Specification for Mineral Fiber Roof Insulation Board Practice for Use and Installation of Reflective Insulation in Building Constructions Specification for Perlite Thermal Insulation Board Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation Practice for Evacuated Reflective Insulation in Cryogenic Service Test Method for Heat Aux Through Evacuated Insulations Using a Guarded Aat Plate Boiloff Calorimeter Practice for Selection of Vapor Retarders for Thermal Insulation Practice for Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperaturcs Specification for Mineral Fiber Loose-Fill Thermal Insulation Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel Specification for Glass Fiber Blanket Insulation (Aircraft Type) Test Method for Total Hemispherical Emittance ofSurfaces from 20 to 1400°C Practice for Application of Cellulosic Fiber Insulating Board for Wall Shcathing Test Method for Resistance to Extemal Loads on Meta! Reflective Pipe Insulation Practice for Conditioning of Thermal Insulating Materials Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Auoride,

Silicate, and Sodium Ions Specification for High-Temperature Fiber Blanket Thermal Insulation Specification for Adhesives for Duct Thermal Insulation Practice for Dctermining the Properties of Jacketing Materials for Thermal Insulation Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation

Materials to Be Used Over Austenitic Stainless Steel Classification of Potential Health and Safety· Concems Associated with Thermal Insulation Materials and

Accessories Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System

on Outdoor Service Vessels Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

t Although this standard has bcen officially withdrawn from Society approval, a brief description is included for infonnation only.

xi

c t§C §C §C §C §C §C §C §C §C c

§C §C

§C §C c

§C

§C tC c c c

§C

c

tc

c c c c c

§C c

§C §C c c c c c

§C §C c c c c c c

§C §C c c c c

522 - 87 ( l 993)El 532- 88 533 - 85 (1990) 534-94 547 - 77 (1993)EI 549- 81 (1986) 550- 81 (1987)EI 552 - 91 553 - 92 578-92 585 -90

591 - 85 592 - 80

610- 85 612 - 93 634-89 635-94

636- 92EI 640- 83 647 - 89a 653-92 656-94a 665 - 91

667 -92

677 - 89

680- 89

686 -90 687 - 93 692 - 90

720- 89 726 - 93 727-90 728 - 91 139 - 91 740 - 82 (1987) 745 - 92 755 - 85 (1990) 762 - 86 (1991) 764-94 795 -92 800-94 835 - 82 ( l988)El 846 - 94 854- 90 870 - 77 (l 992)El 871 - 94

892- 93 916 - 85 (1990) 921 - 89 929-94

930-92

945 - 81 (1993)

950 - 81 (1993)

CONTENTS

Test Method for Airflow Resistance of Acoustical Materials Specification for Structural Insulating Formboard (Cellulosic Fiber) {Discontinued 1993) Specification for Calcium Silicate Block and Pipe Thermal Insolation Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form Specification for Mineral Fiber Preformed Pipe Insolation Specification for Perlite Loose Fill Insolation Practice for Measuring Trueness and Squareness of Rigid Block Thermal Insulation Specification for Cellular Glass Thermal Insulation Specification fo'r Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications Specification for Rigid, Cellular Polystyrene Thermal Insolation Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing

(NPS System) Specification for Unfaced Preformed Rigid Cellular Polyurethane Thermal Insulation Specification for Mineral Fibet Blanket Insolation and Blanket-Type Pipe Insulation (Metal-Mesh Covered)

(Industrial Type) Specification for Expanded Perlite Block and Pipe Thermal Insulation Specification for Mineral Fiber Block and Board Thermal Insulation Terminology Relating to Environmental Acoustics Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical

Tile and Lay-ln Panel Ceilings Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels Specification for Corkboard and Cork Pipe Thermal Insulation (Discontinued 1994) Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation Specification for Structural Insulating Board, Calcium Silicate Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured

Housing Specification for Prefabricated Retlective Insulation Systems for Equipment and Pipe Operating at

Temperatures Above Ambient Air Practice for Use ofa Polyethylene Terephthalate Reference Film for the Measurement ofthe Time-Averaged

Vapor Pressure in a Controlled Humidity Space (Discontinued l9j4) ' 1

Practice for Determination . of Heat Gain or Loss and the Surf~ Tentperatures of Insulated Pipe and Equipment Systems by the Use of a Computer Program

Test Method for Parting Strength of Mineral Fiber Batt- and 'Blanket-Type Insulation Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation Test Method for Evaluating the Influence of Thermal Insulations on the External Stress Corrosion Cracking

Tendency of Austenitic Steel Specification for Spray-Applied Fibrous Thermal Insulation for Elevated Tethperature Specification for Mineral Fiber Roof Insulation Board Practice for Use and Installation of Retlective Insulation in Building Constructions Specification for Perlite Thermal Insulation Board Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation Practice for Evacuated Reflective Insulation in Cryogenic Service Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter Practice for Selection of Vapor Retarders for Thermal Insulation Practice for Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperatures Specification for Mineral Fiber Loose-Fill Thermal Insulation Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel Specification for Glass Fiber Blanket Insulation (Aircraft Type) Test Method for Total Hemispherical Emittance ofSurfaces from 20 to 1400°C Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing Test Method for Resistance to External Loads on Metal Reflective Pipe Insolation Practice for Conditioning of Thermal Insulating Materials Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride,

Silicate, and Sodium Ions Specification for High-Temperature Fiber Blanket Thermal Insulation Specification for Adhesives for Duct Thermal Insulation Practice for Determining the Properties ofJacketing Materials for Thermal Insolation Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation

Materials to Be Used Over Austenitic Stainless Steel Classification of Potential Health and Safety· Concerns Associated with Thermal Insulation Materials and

Accessories Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System

on Outdoor Service Vessels Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service V essels

t Although this standard has been officially withdrawn from Society approval, a brief description is included for information only.

xi

c 971 - 82 (1992)

c 976-90 c 984-83 c 991-92 C 1003 - 83 (l992)EI c 1013-85 c 1014-94 c 1015 - 84 (1990) c 1029-90 C 1033 - 85 (l994)EI c 1041 - 85 (1990)

c 1043- 89

c 1044-90

c 1045-90 c 1046- 91 c 1049-85 c 1050-91 c 1055 - 92

tC 1056- 86

c 1057-92

c 1058-92 c 1060-90 c 1061 - 86 c 1071-91 C l086-90a C 1094 - 88(1993)EI C 1101/C llOlM - 88 C 1104/C l 104M- 88 c 1114-92 c 1126- 89 C 1129 - 89 (1994)El c 1130-90 c 1132-89 c 1134-90

§C 1136-92 c 1139-90

c 1146-89

c 1149-90 c 1153-90 C 1155 - 90EI c 1158-90 c 1199 - 91

c 1224-93 c 1258-94 c 1263-94

§E 90-90 §E 96-94 §E 336-90 tE 398 - 83 (l 993)E1

§E 413 - 87 (1994)El E 477-90

E 492-90

E 497 - 89 (l994)EI E 557-93

§E 580-91

§E 596-90

CONTENTS

Guide for Selection and Application of Insulation Systems for Heating, Ventilating, and Air Conditioning Duct Work

Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box Specification for Perlite Board and Rigid Cellular Polyurethane Composite Roof Insulation Specification for Flexible Glass Fiber Insulation for Pre-Engineered Metal Buildings Test Method for Thermal Performance of Cooling Air Duct Sections, Using a Calibrated Hot Box Specification for Membrane-Faced Rigid Cellular Polyurethane Roof Insulation Specification for Spray-Applied Mineral Fiber Thermal or Acoustical Insulation Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation Specification for Spray-Applied Rigid Cellular Polyurcthance Thermal Insulation Test Method for Steady-State Heat Transfer Properties of Pipe Insulation lnstalled Vertically Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux

Transducers Practice for Determination of Hot Plate Temperature When Using a Line Source Heater in the

Guarded-Hot-Plate Apparatus for Measurement of Steady-State Thermal Transmission Properties Practice for Using the Guarded-Hot-Plate Apparatus in the One-Sided Mode to Measure Steady-State Heat

Flux and Thermal Transmission Properties Practice for Calculating Thermal Transmission Properties from Steady-State Heat Flux Measurements Practice for In Situ Measurement of Heat Flux and Temperature on Building Envelope Components Practice for Installation of Granular Loose-Fill Thermal Insulation Specification for Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation Guide for Heated System Surface Conditions That Produce Contact Bum Injuries Practice for Preparation of Loose-Fill Mineral Fiber Thermal Insulation Samples for Testing (Discontinued

1993) Practice for Determination ofSkin Contact Temperature from Heated Surfaces Using a Mathematical Model

and Thermesthesiometer Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties ofThermal Insulation Practice for Thermographie Inspection of Insulation Installations in Envelope Cavities of Frame Buildings Test Method for Thermal Transmission Properties ofNonhomogeneous Insulation Panels Installed Vertically Specification for Thermal and Acoustical Insulation (Glass Fiber, Duct Lining Material) Specification for Glass Fiber Feit Thermal Insulation Guide for Flexible Removable Insulation Covers Test Methods for Oassifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation Test Method for Determining the Water Vapor Sorption ofUnfaced Mineral Fiber Insulation Test Method for Steady-State Thermal Transmission Properties by Means ofthe Thin-Heater Apparatus Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Aanges Practice for Calibrating Thin Heat Flux Transducers Practice for Calibration of the Heat Flow Meter Apparatus Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation Specification for Fibrous Glass Thermal lnsulation and Sound Absorbing Blanket and Board for Military

Applications Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures

Above Ambient Air Specification for Self-Supported Spray-Applied Cellulosic Thermal/ Acoustical Insulation Practice for the Location of Wet Insulation in Roofing Systems Using Infrared Imaging Practice for Determining Thermal Resistance of Building Envelope Components from In-Situ Data Practice for Use and Installation of Radiant Barrier Systems (RBS) in Building Constructions Test Method for Measuring the Steady State Thermal Transmittance ofFenestration Systems Using Hot Box

Methods Specification for Reflective lnsulation Building Applications Test Method for Elevated Temperature and Humidity Resistance ofVapor Retarders for Insulation Test Method for Thermal lntegrity ofF!exible Water Vapor Retarders Test Method for Laboratory Measurement of Airbome Sound Transmission Loss of Building Partitions Test Methods for Water Vapor Transmission ofMaterials Test Method for Measurement of Airbome Sound Insulation in Buildings Test Method for Water Vapor Transmission Rate ofSheet Materials Using a Rapid Technique for Dynamic

Measurement (Discontinued 1994) Oassification for Rating Sound Insulation Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated

Silencers Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies

Using the Tapping Machine Practice for Installing Sound-lsolating Lightweight Partitions Practice for Architectural Application and Installation of Operable Partitions Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas

Requiring Seismic Restraint Test Method for Laboratory Measurement of the Noise Reduction of Sound-Isolating Enclosures

xii

E 597 - 81 (1987)

E 717-84(1989) §E 756- 93 E 795 - 93 E 966-92 E 989 - 89 (1994)U E 1007-90

E 1014- 84 (1990) E 1041 - 85 (1990) E 1042-92 E 1050-90

E 1110 - 86 (1990) E 1111-92 E 1123-86 (1990)

E 1124-92 E 1130- 90 E 1179-87(1993)0 E 1222-90

§E 1264- 90 E 1265 -90 E 1289 - 91 E 1332-90 E 1374- 93 E 1375-90 E 1376 - 90

E 1408-91

E 1414- 9lau E 1433-91 E 1503 - 92 E 1573-93

E 1574- 94

CONTENTS

Practice for Determining a Single-Number Rating of Airbome Sound Isolation for Use in Multiunit Building / Specifications

Guide for Preparation of the Accreditation Annex of Acoustical Test Standards Test Method for Measuring Vibration-Damping Properties of Materials Practices for Mounting Test Specimens During Sound Absorption Tests Guide for Field Measurement of Airbome Sound Insulation of Building Facades and Facade Elements Classification for Determination of Impact lnsulation Class (IIC) Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Aoor-

Ceiling Assemblies and Associated Support Structures Guide for Measurement ofOutdoor A-Weighted Sound Levels Guide for Measurement of Masking Sound in Open Offices Classification for Acoustically Absorptive Materials Applied by Trowel or Spray Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones, and a

Digital Frequency Analysis System Classification for Determination of Articulation Class Test Method for Measuring the lnterzone Attenuation of Ceiling Systems Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship

Bulkhead Treatment Materials Test Method for Field Measurement of Sound Power Level by the Two-Surface Method Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index Specification for Sound Sources Used for Testing Open Office Components and Systems Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems Classification for Acoustical Ceiling Products Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers Specification for Reference Specimen for Sound Transmission Loss Classification for Determination of Outdoor-lndoor Transmission Class Guide for Open Office Acoustics and Applicable ASTM Standards Test Method for Measuring the Interzone Attenuation of Fumiture Panels Used as Acoustical Barriers Test Method for Measuring the lnterzone Attenuation of Sound Reflected by Wall Finishes and Fumiture

Panels Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door

Systems Test Method for Airbome Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum Guide for Selection of Standards on Environmental Acoustics Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band

Sound Pressure Levels Test Method for Measurement of Sound in Residential Spaces

RELATED MA TERIAIS

PAGE Practice for Use of the International System of Units (SI) (the Modernized Metric System) (Excerpts) (E 380) . . . . . . . . . . . . . . . . . . . 921 Index ..................................................... . ..• , . . . . . . . . . . . . . . • . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933 ASTM Membership Application Blank

PENDING STANDARDS ACTION

The following standard action was on Society ballot when this edition went to press. If approved, the action will be noted in Standardization News, and the document will be available soon thereafter as a separate reprint.

Revision of Standard: E 596-90

xiii