annex to iso/iec 17065:2012 declaration of accreditation for
TRANSCRIPT
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 to 01-05-2022 Replaces annex dated: 05-11-2018
Location(s) where activities are performed under accreditation
Head Office
Meander 10516825 MJArnhemThe Netherlands
Dutch Accreditation Council RvA Page 1 of 29
This annex has been approved by the Board of theDutch Accreditation Council, on its behalf,
J.A.W.M. de HaasDirector of Operations
Location Certification Scheme
DEKRA Certification B.V. Head officeMeander 10516825 MJ ArnhemThe Netherlands
KEMA-KEUR, ENEC, Low power measurements, Powercapacitors - Low-voltage power factor correction banks,CCV-Certificatieschema, National Guideline for theKOMO®, EMC Directive, ATEX Directive, Machinerydirective, EPA Energy Star program, NTA 8081,Construction products regulation (CPR)
Unit 1-14, 6/F Fuk Shing Commercial Building,Fanling, 28 On Lok Mun StreetHong KongChina
KEMA-KEUR, Low power measurements.
10F #250 Jiangchangsan Road, Building 16Headquarter Economy Park, Shibei Hi-Tech Park200436 ShanghaiChina
KEMA-KEUR, Low power measurements.
DEKRA House, Block A3No 3 Qiyun Road510630 GuangzhouChina
KEMA-KEUR, Low power measurements.
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
1 Definitions in accordance with ISO 9000:2005, 3.4.22 If there is a referral to a scope (Sxxx), this constitutes a scheme of an accepted scheme owner. The accepted version is mentioned on the concerning scope of the scheme owner.3 For normative documents the most current version of the document is mentioned. In case of schemes for which reference is made to an accepted scheme owner, the version indicated in the scopeof acceptance is meant.
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 2 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Location Arnhem
Cables and cords(CABL)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC 60227*IEC 60245*IEC/EN 60799EN 13501EN 50143EN 50214EN 50525EN 50288EN 50399EN 50618HD 21 / HD 22HD 603HD 604IEC 60055IEC 60092IEC 60141IEC 60502IEC 60800IEC 60840IEC 61089IEC 62067IEC 62271-209NEN 3172NEN 3616NEN 3619NEN 3620NEN 3630NF C34-125IEEE Std 404IEEE Std 48DEKRA K 42DEKRA K 102DEKRA K 145DEKRA K 146DEKRA K 151DEKRA K 152DEKRA K 156DEKRA K 157DEKRA K 158DEKRA K 160DEKRA K 161
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 3 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
DEKRA K 162DEKRA K 163DEKRA K 164DEKRA K 165DEKRA K 167DEKRA K 168DEKRA K 169DEKRA K 170DEKRA K 171DEKRA K 175DEKRA K 176DEKRA K 177DEKRA K 178DEKRA K 179BS 6004, BS 6007BS 4553, BS 5467BS 6231, BS 6346BS 6387, BS 6500BS 6622, BS 6724BS 6883, BS 7211BS 7629, BS 7835BS 7846, BS 7889BS 8491, BS EN 50288-7DIN VDE 0815DIN VDE 0250
Cables and cords(CABL)
KEMA-KEUR<HAR>
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
EN 50143EN 50214EN 50525HD 21HD 22
Capacitors ascomponents
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 60252IEC/EN 60384IEC/EN 61048IEC 60358IEC 60831IEC 60871
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 4 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Switches and automaticcontrols(CONT)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 60691IEC/EN 60730*IEC/EN 60934IEC/EN 61095*IEC 62271-1IEC 62271-100IEC 62271-101IEC 62271-102IEC 62271-103IEC 62271-104IEC 62271-105IEC 62271-110IEC 62271-200IEC 62271-201IEC 62271-202IEC 62271-203EN 50152-1IEEE Std C37.09IEEE Std C37.081IEEE Std C37.60IEEE Std C37.013IEEE Std C37.34IEEE Std C37.41IEEE Std C37.73IEEE Std C37.122ANSI C37.20.2ANSI C37.41ANSI C37.54ANSI C37.55ANSI C37.72ANSI/IEEE C37.21
ENEC
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 60730
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 5 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Household equipment(HOUS)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 60204IEC/EN 60335*IEC/EN 61770IEC/EN 62233EN 50366
ENEC
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 60335*IEC/EN 62233EN 50366
Low power measurements IEC/EN 62301
Installation accessoriesand connection devices(INST)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
DEKRA K 24DEKRA K 55IEC/EN 60309*IEC/EN 60320*IEC/EN 60335-2-76IEC/EN 60669*IEC/EN 60670*IEC/EN 60974IEC/EN 60998*IEC/EN 61058*IEC/EN 61242*IEC/EN 61316IEC/EN 61386IEC/EN 61534*IEC/EN 61537BS/EN 61537IEC/EN 61984*IEC/EN 62094EN 50075EN 50066EN 50085EN 50086
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 6 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Installation accessoriesand connection devices(INST)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location
Re-examination
EN 50146EN 50250EN 50393NEN 1251NEN 1020IEC 60884IEC 61238IEC 62080BS 546BS 1363-1BS 1363-2BS 1363-3BS 1363-4BS 4573BS 5733SS 145NF C61-314DIN VDE 0620-1DIN VDE 0620-2-1IEC/EN 61535EN 50428SEV 1011CEI 23-50NBN C 61-112-1NEK IEC 60884-1NEK 502ÖVE/ÖNORM E 8620-2ÖVE/ÖNORM E 8620-3ÖVE/ÖNORM E 8620-4ÖVE/ÖNORM E 8620-5ÖVE/ÖNORM E 8684-1SFS 5610SS 428 08 34DS 60884-2-D1UNE 20315-1-1UNE 20315-1-2
ENEC
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 50075IEC/EN 60998*IEC/EN 60309*IEC/EN 60799IEC/EN 60320*IEC/EN 61058*IEC/EN 61535
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 7 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Lighting(LITE)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60155*IEC/EN 60238*IEC/EN 60400*IEC/EN 60570*IEC/EN 60598*IEC/EN 60838*IEC/EN 60921*IEC/EN 60923IEC/EN 60925IEC/EN 60927IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61047IEC/EN 61050IEC/EN 61184IEC/EN 61347*IEC/EN 62031IEC/EN 62035IEC/EN 62384IEC/EN 62471IEC/EN 62493IEC/EN 62560IEC/EN 62776IEC/EN 62838
ENEC
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60155*IEC/EN 60238*IEC/EN 60400*IEC/EN 60570*IEC/EN 60598*IEC/EN 60921IEC/EN 60923IEC/EN 60925IEC/EN 60927IEC/EN 60929IEC/EN 61047IEC/EN 62031IEC/EN 62384IEC/EN 62471IEC/EN 61347*IEC/EN 60838*IEC/EN 60968*IEC/EN 60969*IEC/EN 62560IEC/EN 61184IEC/EN 62776
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 8 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Measuring instruments(MEAS)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 61010*IEC/EN 61243IEC/EN 60044IEEE Std C57.13
Electrical equipment formedical use(MED)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60601*IEC/EN/ISO 80601HD 395
IT and office equipment(OFF)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60825IEC/EN 60950*IEC/EN 62040*IEC/EN 62368*EN 41003
ENEC
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60950*IEC/EN 62368*
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 9 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Switching equipment(POW)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60947*IEC/EN 60282IEC/EN 62208EN 50178IEC 60470IEC 60549IEC 60644EN 60282-1IEEE Std C37.41IEEE Std C37.60ANSI C37.44
Schakelmaterieel(POW)
Power capacitors - Low-voltage power factor correctionbanks
IEC 61921
Installation protectiveequipment(PROT)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60127*IEC/EN 60269*IEC/EN 60529*IEC/EN 60755IEC/EN 60898*IEC/EN 61008*IEC/EN 61009*IEC/EN 61643*IEC/EN 62019IEC/EN 62423IEC/EN 62640IEC 60099IEC 60137IEC 60168IEC 60383IEC 60507IEC 60660IEC 61109IEC 60815HD 630HD 639HD 60269IEEE Std 62.11ANSI C29CAN/CSA C411.1
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 10 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Safety transformersand similar equipment(SAFE)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 61869-1IEC/EN 61869-2IEC/EN 61558*IEC/EN 62040IEC 60076IEC 60353CENELEC HD 538.1EN 50464-1IEEE Std. C57.12.90IEEE Std C57.21CISPR 16
ENEC
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 61558*
Portable tools(TOOL)PortableTransportableLawn and Garden
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60204-1IEC/EN 60335*IEC/EN 60745*IEC/EN 61029*IEC/EN 62233EN 50580EN/ISO 11148EN 50636-2-91EN 50636-2-92EN 50636-2-94EN 50636-2-100EN 50636-2-107IEC/EN 62841*
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 11 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
ENEC
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60335*IEC/EN 60745*IEC/EN 61029*IEC/EN 62233EN 50580EN 50636-2-91EN 50636-2-92EN 50636-2-94EN 50636-2-100EN 50636-2-107IEC/EN 62841*
Electronics,entertainment(TRON)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60065*IEC/EN 60491IEC/EN 62368*
Brandmeldinstallaties CCV-CertificatieschemaLeveren Brandmeldinstallaties
Initiële audit: Audit organisatie Inspectie product
Jaarlijks toezicht: Audit organisatie Inspectie product
(NAP-0163)
CCV-CertificatieschemaBrandmeldinstallaties
Brandmeldinstallaties CCV-CertificatieschemaInstalleren Brandmeldinstallaties
Initiële audit: Audit organisatie Inspectie product
Jaarlijks toezicht: Audit organisatie Inspectie product
(NAP-0164)
CCV-CertificatieschemaInstallerenBrandmeldinstallaties
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 12 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Brandmeldinstallaties CCV-CertificatieschemaOnderhoud Brandmeldinstallaties
Initiële audit: Audit organisatie Inspectie dienst
Jaarlijks toezicht: Audit organisatie Inspectie dienst
(NAP-0165)
CCV-CertificatieschemaOnderhoudBrandmeldinstallaties
Ontruimings-alarminstallaties
CCV-CertificatieschemaLeveren Ontruimingsalarminstallaties met deelaccreditatie:
Type B + attentiepanelen
Initieel onderzoek: Inspectie product Audit ondersteunend managementsysteem
Periodiek toezicht: Inspectie product Audit ondersteunend managementsysteem
(NAP-0168)
CCV-CertificatieschemaOntruimings-alarminstallaties
Ontruimings-alarminstallaties
CCV-CertificatieschemaInstalleren Ontruimingsalarminstallaties:
Initieel onderzoek: Inspectie product Audit ondersteunend managementsysteem
Periodiek toezicht: Inspectie product Audit ondersteunend managementsysteem
(NAP-0169)
CCV-CertificatieschemaInstallerenOntruimings-alarminstallaties
Ontruimings-alarminstallaties
CCV-CertificatieschemaOnderhoud Ontruimingsalarminstallaties:
Initieel onderzoek: Inspectie dienst Audit ondersteunend managementsysteem
Periodiek toezicht: Inspectie dienst Audit ondersteunend managementsysteem
(NAP-0170)
CCV-CertificatieschemaOnderhoudOntruimings-alarminstallaties
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 13 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Sustainably producedbiomass
NTA 8081: Certification scheme for sustainablyproduced biomass for energy purposes, for the scopes:
A1 (organisations for which all requirements areapplicable)
A3 (producer) B (processor) C (trader) D (end-user)
(NAP-0182)
NTA 8080
Sustainably procucedbiomass for bio-energyand biobased products
NCS 8080: Certificatieschema voor duurzaamgeproduceerde biomassa voor bio-energie en biobasedproducten voor de scope:
- biomassaproducent- smallholder- inzamelaar primaire reststromen- inzamelaar niet-primaire reststromen- processor- trader- end-user
Audit van productieproces biomassa en audit van proces vanketenbeheer
Verificatie van variabele inputwaarden op locatie (indien vantoepassing)
(NAP-0207)
NTA 8080-1NTA 8080-2
National guideline for the KOMO®-, respectively the NL-EPBD®- process certificate for“EnergiePrestatieAdvisering” (Energy Performance Advice)
Existing residences Issuing an “Energielabel” (Energy Label), ExistingResidences
Initial audit: Organisation audit Project inspection
Annual surveillance: Organisation audit Project inspection
(NAW-0156)
BRL 9500-00BRL 9500-01
Issuing an “EPA-Maatwerkrapport” (Energy PerformanceAdvice - Tailor-made report), Existing Residences
Initial audit:
BRL 9500-00BRL 9500-02
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 14 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Organisation audit Project inspection
Annual surveillance: Organisation audit Project inspection
(NAP-0157)
Existing utility buildings Issuing an “Energielabel” (Energy Label), Existing Utilitybuildings
Initial audit: Organisation audit Project inspection
Annual surveillance: Organisation audit Project inspection
(NAW-0158)
BRL 9500-00BRL 9500-03
Issuing an “EPA-Maatwerkrapport” (Energy PerformanceAdvice - Tailor-made report), Existing Utility buildings
Initial audit: Organisation audit Project inspection
Annual surveillance: Organisation audit Project inspection
(NAP-0159)
BRL 9500-00BRL 9500-04
EPA Energy Star Program
LITE Energy Star ENERGY STAR® ProgramRequirements for Lamps(Light Bulbs)
ENERGY STAR® ProgramRequirements for DecorativeLight Strings
ENERGY STAR® ProgramRequirements forLuminaires
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 15 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Directive 2006/42/ECMachinery
The accreditation for the specified activities is suitable for notification
Product / productgroup
Module / article Conformity assessmentprocedure
1. Circular saws(single- or multi-blade)for working with woodand material withsimilar physicalcharacteristics or forworking with meat andmaterial with similarphysical characteristics,of the following types:
1.1. Sawingmachinery with fixedblade(s) duringcutting, having afixed bed or supportwith manual feed ofthe workpiece orwith a demountablepower feed;1.2. Sawingmachinery with fixedblade(s) duringcutting, having amanually operatedreciprocating saw-bench or carriage;1.3. Sawingmachinery with fixedblade(s) duringcutting, having abuilt-in mechanicalfeed device for theworkpieces, withmanual loadingand/or unloading;
1.4. Sawingmachinery withmovable blade(s)during cutting,having mechanicalmovement of the
EC-type examination Annex IX
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 16 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
blade, with manualloading and/orunloading.
2. Hand-fed surfaceplaning machinery forwoodworking.
EC-type examination Annex IX
3. Thicknessers forone-side dressinghaving a built-inmechanical feeddevice, with manualloading and/orunloading forwoodworking.
EC-type examination Annex IX
4. Band-saws withmanual loading and/orunloading for workingwith wood and materialwith similar physicalcharacteristics or forworking with meat andmaterial with similarphysical characteristics,of the following types:
4.1. Sawingmachinery with fixedblade(s) duringcutting, having afixed orreciprocating-movement bed orsupport for theworkpiece;
4.2. Sawingmachinery withblade(s) assembledon a carriage withreciprocatingmotion.
EC-type examination Annex IX
5. Combined machineryof the types referred to
EC-type examination Annex IX
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 17 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
in points 1 to 4 and inpoint 7 for working withwood and material withsimilar physicalcharacteristics.
6. Hand-fed tenoningmachinery with severaltool holders forwoodworking.
EC-type examination Annex IX
7. Hand-fed verticalspindle mouldingmachinery for workingwith wood and materialwith similar physicalcharacteristics.
EC-type examination Annex IX
8. Portable chainsawsfor woodworking. EC-type examination Annex IX
Directive 2014/30/EUElectromagnetic compatibility
The accreditation for the specified activities is suitable for notification
Electric and electronicappliances (apparatuswith electrical and/orelectronic parts liable togenerateelectromagneticdisturbance, or theperformance of which isliable to be affected bysuch disturbance)
EU-type examination (module B) Annex III, part A
Directive 2014/34/EUEquipment and protective systems intend for use in potentially explosive atmospheres
The accreditation for the specified activities is suitable for notification
Equipment category M1 EU-type examination (module B) Annex III
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 18 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
of equipment-group I –electrical equipmentand non-electricalequipment
Conformity to type based on quality assurance of theproduction process (module D)
Annex IV
Conformity to type based on product verification (moduleF)
Annex V
Conformity based on unit verification (module G) Annex IX
Equipment category 1of equipment-group II,explosive atmospheredue to gases, vapoursor mists – electricalequipment and non-electrical equipment
EU-type examination (module B) Annex III
Conformity to type based on quality assurance of theproduction process (module D)
Annex IV
Conformity to type based on product verification (moduleF)
Annex V
Conformity based on unit verification (module G) Annex IX
Equipment category 1of equipment-group II,explosive atmospheredue to air/dust mixtures– electrical equipmentand non-electricalequipment
EU-type examination (module B) Annex III
Conformity to type based on quality assurance of theproduction process (module D)
Annex IV
Conformity to type based on product verification (moduleF)
Annex V
Conformity based on unit verification (module G) Annex IX
Equipment category M2of equipment-group I –electrical equipment
EU-type examination (module B) Annex III
Conformity to type based on internal production controlplus supervised product testing (module C1)
Annex VI
Equipment category M2of equipment-group I –non-electrical
Communication of technical documentation for internalproduction control
Article 13, sub 1b-ii andAnnex VIII
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 19 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
equipment
Equipment category M2of equipment-group I –electrical equipmentand non-electricalequipment
Conformity to type based on product quality assurance(module E)
Annex VII
Conformity based on unit verification (module G) Annex IX
Equipment category 2of equipment-group II,explosive atmospheredue to air/dust mixture– electrical equipment
EU-type examination (module B) Annex III
Conformity to type based on internal production controlplus supervised product testing (module C1)
Annex VI
Conformity to type based on product quality assurance(module E)
Annex VII
Equipment category 2of equipment-group II,explosive atmospheredue to air/dust mixture– non-electricalequipment
Communication of technical documentation for internalproduction control
Article 13, sub 1b-ii andAnnex VIII
Equipment category 2of equipment-group II,explosive atmospheredue to air/dust mixture– electrical equipmentand non-electricalequipment
Conformity based on unit verification (module G) Annex IX
Equipment category 2of equipment-group II,explosive atmospheredue to gases, vapoursor mists – electricalequipment
EU-type examination (module B) Annex III
Conformity to type based on internal production controlplus supervised product testing (module C1)
Annex VI
Conformity to type based on product quality assurance(module E)
Annex VII
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 20 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Equipment category 2of equipment-group II,explosive atmospheredue to gases, vapoursor mists – non-electrical equipment
Communication of the technical documentation as part ofinternal production control
Article 13, sub 1b-ii andAnnex VIII
Equipment category 2of equipment-group II,explosive atmospheredue to gases, vapoursor mists – electricalequipment and non-electrical equipment
Conformity based on unit verification (module G) Annex IX
Equipment category 3of equipment-group II
Conformity based on unit verification (module G) Annex IX
Protective systems EU-type examination (module B) Annex III
Conformity to type based on product verification(module F) Annex V
Conformity based on unit verification (module G) Annex IX
Components EU-type examination (module B) Annex III
Conformity to type based on quality assurance of theproduction process (module D)
Annex IV
Conformity to type based on product quality assurance(module E)
Annex VII
Conformity to type based on product verification (moduleF)
Annex V
Conformity to type based on internal production controlplus supervised product testing (module C1);
Annex VI
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 21 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Conformity based on unit verification (module G) Annex IX
The accreditation for the specified activities is suitable for notification
European construction products regulation No. 305/2011
Product area 31
Decision 2011/284/ECPower, control andcommunication cables
European construction products regulation 305/2011,
System 1+, Certification of constancy of performance
EN 50575:2014+A1:2016
Location Shanghai
Household equipment(HOUS)
KEMA-KEUR
Initial assessment: Type approval Initial inspection production location
Surveillance: Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60204IEC/EN 60335*IEC/EN 62233EN 50366
Low power measurements IEC/EN 62301
Lighting(LITE)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60155*IEC/EN 60238*IEC/EN 60400*IEC/EN 60570*IEC/EN 60598*IEC/EN 60838*IEC/EN 60921*IEC/EN 60923IEC/EN 60925IEC/EN 60927IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61047IEC/EN 61050
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 22 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
IEC/EN 61184IEC/EN 61347*IEC/EN 62031IEC/EN 62035IEC/EN 62384IEC/EN 62560EN 61050IEC/EN 62493IEC/EN 62311IEC/EN 62471*IEC/EN 62493IEC/EN 62479IEC/EN 60901IEC/EN 60081IEC/EN 61195IEC/EN 61199IEC/EN 60432-1IEC/EN 60432-2IEC/EN 60432-3
Measuring instruments(MEAS)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 61010*IEC/EN 61243IEC/EN 60044IEEE Std C57.13
IT and office equipment(OFF)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60825IEC/EN 60950*IEC/EN 62040*EN 41003
Safety transformersand similar equipment(SAFE)
KEMA-KEUR
Initial assessment:
IEC/EN 60044*IEC/EN 61558*IEC/EN 62040
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 23 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60289IEC 60076IEC 60353EN 50091CENELEC HD 428.1CENELEC HD 538.1IEEE Std. C57.12.90IEEE Std C57.21NEMA 107CISPR 16
Portable tools(TOOL)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60745*IEC/EN 61029*IEC/EN 60335* (Gardening)IEC/EN 62233IEC/EN 60204EN 50144EN 50260EN 792EN/ISO 11148
Electronics,entertainment(TRON)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60065*IEC/EN 60491
Battery(BATT)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 62133
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 24 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Or pre-shipment inspection
Cables and cords(CABL)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
K 175K 178K 179EN 50525EN 50618DKE AK 411.2.3VDE-AR-E 2283-4IEC 60227IEC 60245IEC 60502EN 50214IEC/EN 61386EN 62275EN 50117EN 50288IEC 60966ISO 6722DIN 72553
Electric Vehicle(ELVH)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 61851IEC/EN 62196IEC/EN 61439K180
Installation accessoriesand connection devices(INST)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC 60884*EN 50075NEN 1020DIN VDE 0620-1DIN VDE 0620-2-1DIN VDE 0680-1NBN C 61-112-1NF C 61-314SEV 1011CEI 23-50UNE 20315PN-IEC 60884-1SS 428 08 34SS IEC 60884-1BS 1363-1
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 25 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
BS 1363-2BS 546BS 4573SS 145-1SS 145-2SS 472IEC/EN 60309*CEI 23-57SFC 5610NEK 502NEK IEC 60884-1BS 5733SS 241BS 8488IEC/EN 60320*IEC/EN 61984IEC/EN 61242IEC/EN 61535IEC/EN 60669*IEC/EN 61058*IEC/EN 60998*
Installation protectiveequipment(PROT)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 61643EN 50539IEC/EN 60127
Location Guangzhou
Household equipment(HOUS)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60335*IEC/EN 62233EN 50366
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 26 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Low power measurements IEC/EN 62301
Lighting(LITE)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60598*IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61347*IEC/EN 62031IEC/EN 62471*IEC/EN 62560IEC/EN 62493IEC/EN 62311IEC/EN 62479
IT and office equipment(OFF)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60950*IEC/EN 62040-1IEC/EN 62311IEC/EN 62479
Safety transformersand similar equipment(SAFE)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60742IEC/EN 61558*CISPR 16
Electronics,entertainment(TRON)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC/EN 60065*
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 27 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Or pre-shipment inspection
Battery(BATT)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 62133
Installation accessoriesand connection devices(INST)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC 60884*EN 50075NEN 1020DIN VDE 0620-1DIN VDE 0620-2-1NBN C 61-112-1NF C 61-314SEV 1011CEI 23-50UNE 20315-1-1UNE 20315-1-2PN-IEC 60884-1SS 428 08 34SS IEC 60884-1BS 1363-1BS 546BS 4573SS 145-1SS 472BS 5733SS 241BS 8488IEC/EN 60320*IEC/EN 61242*IEC/EN 61535IEC/EN 60669*IEC/EN 61058*IEC/EN 60998*
Automatic electricalcontrols for householdand similar use
KEMA-KEUR
Initial assessment:
IEC/EN 60730*
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 28 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
(CONT) Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
Location Hong Kong
Household equipment(HOUS)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60335*IEC/EN 62233EN 50366
Low power measurements IEC/EN 62301
Lighting(LITE)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60598*IEC/EN 60929IEC/EN 60968*IEC/EN 60969*IEC/EN 61347*IEC/EN 62031IEC/EN 62471*IEC/EN 62560IEC/EN 62493IEC/EN 62560IEC/EN 62471
IT and office equipment(OFF)
KEMA-KEUR
Initial assessment:
IEC/EN 60950*
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 29 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
Safety transformersand similar equipment(SAFE)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 61558*
Electronics,entertainment(TRON)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination Or pre-shipment inspection
IEC/EN 60065*
* See current list of sub set of standards on the IECEE CBTL website