anna university practical examination 1.docx
TRANSCRIPT
-
7/29/2019 ANNA UNIVERSITY PRACTICAL EXAMINATION 1.docx
1/3
ANNA UNIVERSITY PRACTICAL EXAMINATIONNOV 2012
1103GRT Institute of Engineering and Technology
Department of Electrical and Electronics Engineering
Subject Name: Electronic Devices and Circuits Lab Date: 10/11/2012Subject Code: EE2207 Duration: 3 Hrs
Year/ Semester: II / III Department: EEE
LIST OF EXPERIMENTS
1. (a) Choose a suitable two terminal uni junction device and obtain the characteristiccurve. Find the static and dynamic resistance.
(b)Construct a suitable series circuit with the basic components resistor, inductor andcapacitor. Find resonance frequency.
2. (a) Conduct a suitable experiment and obtain the regulated output. Find the forwardand reverse resistance
(b) Construct a suitable parallel circuit with the basic components resistor, inductor
and capacitor. Find resonance frequency.
3. Construct a suitable circuit using current controlled device used as an amplifier andplot its characteristic curve. Find its parameters.
4. Construct a suitable circuit using current controlled device used for high frequencyapplication and plot its characteristic curve. Find its parameters.
5. Construct a suitable circuit using voltage controlled device and plot its characteristiccurve. Find its parameters.
6. Choose a suitable device used as relaxation oscillator and plot its characteristic curve.7. Construct a suitable circuit and plot the bi-directional characteristic curve of D3202.8. Construct a suitable circuit with three junctions four layer controlled rectifier and plot
its characteristic curve.9. Choose a suitable device used for bidirectional phase control and plot its response.10. (a) Conduct a suitable experiment and plot the characteristics of opto electronic
Devices.
(b) Construct a suitable circuit which allows the frequency above 1.5KHz.
11. Construct a suitable circuit to reduce the ripple content during positive half cycle.
12. Construct a suitable circuit to reduce the ripple content of AC input.
13. Conduct a suitable experiment to amplify the difference in voltage and find the gain.
14. Find the unknown frequency and phase angle of sinusoidal signals.
-
7/29/2019 ANNA UNIVERSITY PRACTICAL EXAMINATION 1.docx
2/3
15. Construct a suitable series and parallel circuit with the basic components resistor,
inductor and capacitor. Find resonance frequency.
16. Conduct a suitable circuit which allows the frequency above and below cut-off
(1KHz ).
17. (a) Conduct a suitable experiment and plot the characteristics of opto electronic
Devices.
(b) Conduct a suitable experiment to measure the temperature in terms of resistance.
18. (a) Choose a suitable two terminal injunctions device and obtain the characteristic
curve. Find the static and dynamic resistance.
(b) Construct a suitable circuit which allows the frequency below 1.5 KHz.
19. Construct a suitable circuit to reduce the ripple content to 1.21.
20. Construct a suitable circuit to reduce the ripple content to 0.48.
INTERNAL EXAMINER EXTERNAL EXAMINER
Mrs.S.Swapna, ,
Department of EEE, Department of EEE,
GRT Institute of Engg & Technology. Sri Krishna College of Engg.
-
7/29/2019 ANNA UNIVERSITY PRACTICAL EXAMINATION 1.docx
3/3