ANGLE BROOM ATTACHMENT

Operator controls downforce. Tilting the broom forward increases downforce to remove dried mud; tilting the broom back reduces downforce to extend bristle life.

The broom has a quick-change rotor design for fast bristle replacement. Removing two bolts allows the entire rotor to be released. (Bristle rotor shown in detached position.)

Specifications

Features• Sweep flush to a curb or wall on right side.

• Adjust the broom angle with fingertip controls on a cab-mounted attachment control kit (sold separately). 48-inch broom has 3-position manual angle.

• High-torque motor for heavy material.

• Proven, replaceable wafer bristles.

• Storage stands eliminate bristle distortion when not in use.

*You can find polypropylene or wire bristle replacement wafers for any model at your Bobcat parts department. Wire/polypropylene combination wafers are available for select models. Contact your dealer’s parts department for more information.

Water kits are available for skid-steer loaders (S130-S330), the all-wheel steer loader (A300), compact track loaders (T140-T320), and the Toolcat™ utility work machine to help control dust (kit purchased separately).

NOTE - Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE) and ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat units may show other than standard equipment. All dimensions are given for loader equipped with standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.

The Bobcat Attachments Advantage: Bobcat attachments are engineered and manufactured to fit Bobcat loaders for optimum job performance, dependability and durability.

Angle Broom 48 in. 68 in. 84 in.

Sweep Width Straight 48 in. (1220 mm) 68 in. (1727 mm) 84 in. (2134 mm)

Sweep Width Fully Angled 41.5 in. (1055 mm) 63 in. (1600 mm) 77 in. (1956 mm)

Degree of Angle (right or left) 30 degrees 25 degrees 25 degrees

Operating Weight 260 lb. (118 kg) 860 lb. (390 kg) 944 lb. (429 kg)

Broom Angling Manual Hydraulic Cylinder Hydraulic Cylinder

Oscillation Fixed Fixed Fixed

Drive System Hydraulic Motor Hydraulic Motor Hydraulic Motor Chain Drive Reduction Direct Drive Direct Drive

Flow Range 8-13 gpm 8-18 gpm 15-28 gpm

Broom Bristle Diameter 21 in. (542 mm) 32 in. (812 mm) 32 in. (812 mm)

Bristle Material Replaceable*

Number of Bristle Sections 23 Zig-Zag 36 Zig-Zag 44 Zig-Zag 2 Straight 2 Straight 2 Straight

Bobcat Angle Broom Attachments fit these carrier models:

Mini Track Loaders: MT52 MT55

Skid-Steer Loaders: 463 S100 S130 S150 S160 S175 S185 S205 S220 S250 S300 S330

Compact Track Loaders: T140 T180 T190 T250 T300 T320

All-Wheel Steer Loaders: A300

Utility Work Machine: 5600

Telescopic Tool Carriers: V417 V518 V638FL V723 V723FL

SpecificationsBobcat® Angle Broom Attachment

Specifications

Kn-10M-208-#12253-F

Bobcat CompanyP.O. Box 6000 • West Fargo, ND 58078

www.bobcat.comPrinted in U.S.A.B-1619 (2/08)