Andex Rotary Rakes

323-353-393-423T-433-464-694-713-724-764-774-784-844-1103-1504

...CompactLine or ProLine?

Maintenance-free oil-immersed system.

Oil-immersed gearbox.

ProLine 10 mm diameter tines.

2

Wear-Free Operation

The Vicon Andex Compact

Line and ProLine rakes are

designed for maximum

performance with minimum maintenance.

ProLineThe Andex ProLine rakes feature a unique drive

system, which comprises oil-immersed pinion

and crown wheels. The fully enclosed design

ensures full and permanent lubrication, and

makes the entire system absolutely mainte-

nance-free.

Our extensive experience guarantees well-

proven technology of the highest standard. The

hardened cam track is adjustable and features

a fl at curve and an extremely large 400 mm

diameter, giving positive guidance to the steel

rotors and quiet machine running.

Aluminium bearing housings, with two integral

ball bearings and wide support, provide solid

and maintenance-free tine arm mounting.

Advantages:

• Oil-immersed crown wheel and pinion

reduces wear to a minimum

• Pinion gear features two bearings for the

driveshaft

• Crown wheel mounted on 4-point radial

bearing

• Guide rollers with hardened surface

• Flat 400 mm cam track, made from high-

tensile SG iron

• Injection moulded aluminium tine arm support

housings

• Adjustable cam track

CompactLineThe Andex CompactLine rakes feature oil-

immersed cam discs and guide rollers. Also,

the tine arm bearings are fully lubricated, and

hence absolutely maintenance-free.

High-tensile tine arm holders and two bearings

on either side of the driveshaft, provide the

compact unit with strength and dependability.

Vicon-developed cam tracks are specifi cally

tailored to individual rotor diameters, for

optimum raking at any working width and on

any model.

3

The Complete Range of Rakes

Outstanding DurabilityThe Vicon rakes are equipped for maximum

raking performance. The CompactLine

rakes all feature 9 mm wire diameter

tines, whereas the ProLine rakes include

heavy duty 10 mm wire diameter tines for

outstanding durability.

Exceptional Raking PerformanceWith up to 15 double tangential tine arms

and up to 5 double tines per arm Vicon

Andex rakes are equipped for maximum

raking performance. The high tine frequency

ensures clean raking performance even

at reduced rpm and high forward speed.

Infi nitely variable cam track adjustment

allows fi ne tuning to obtain optimum raking

and swath formation according to crop

conditions.

Vicon ProLine

rakes, with up to 56 pairs of

10 mm tines, ensure excellent raking performance.

4

Perfect Ground FollowingAndex rotary rakes are designed to produce

well-shaped and clean swaths, achieved

by precision in every part of the raking. The

ground contour following ability is important

to avoid dirt in the swath - especially in

uneven fi eld conditions.

Adaptation in 3 DimensionsThese high performance rakes are fi tted

with the TerraLink Quattro wheel system

for superb ground contour following. The

TerraLink Quattro system controls the rotor

in 3 dimensions, with a unique combination

of an undercarriage with 4 wheels and a

specially designed rotor suspension system.

This ensures superb raking performance,

even at higher forward speeds.

TerraLink Quattro

TerraLink Offers 4-Fold Advantages:The TerraLink system offers clear

advantages over pivoting linkage systems:

• maintenance-free system - no pivots or

joints to wear out.

• automatic rotor suspension, ensuring

smooth operation.

• built-in pressure bias on front wheels

prevents lifting and tine bounce.

• optimum ground following for clean raking

at high forward speeds. All wheels are

positioned close to the tines.

TerraLink Quattro is a maintenance free system

- no pivots or joints to wear out.

5

Compact design for easy maintenance.

Andex 323-353-393-423T-433 • CompactLine

Compact Design, Low Maintenance

The Compact RangeFor smaller raking operations, Vicon offers

five models designed for use on lower

horsepower tractors, whilst delivering similar

raking performance compared to its higher

specification machines. With the pivoting

three point linkage machines and also a

trailed version, there is a model to suit any

need, from lowland farmers, to the users

working on steep hillsides.

Andex ‘Compact’ Rotor HeadThe rotor head is grease lubricated.

Within a fully enclosed housing, the

maintenance free cam track and cam

followers are running permanently lubricated

in an oil bath. The rotor shaft and pinion

shaft are all mounted on two bearings

for maximum strength and long service life.

6

All rakes can be set for reduced transport width

by removing the tine arms and placing them on

the carrier frame.

As an option the rotary rakes can be equipped

with a third wheel to improve ground contour

following.

A pivoting 3-pt headstock ensures perfect

ground following performance, and perfect

tracking when cornering. Oscillation dampers

are optionally available.

Curved Tine ArmsAll Andex CompactLine rakes feature

cranked tine arms for significantly cleaner

raking performance and optimised swath

formation. This design ensures that the row

of tines on each tine bar has a more effective

approach angle to the oncoming crop, and

also gives a cleaner lift out of the tine from

the formed swath.

The Andex 353 with 3.5 m working width offers

high performance with a simple but reliable

system.

With a linkage mounted drawbar, the Andex

423T can be easily operated by low horse power

tractors.

The machine can conveniently be raised up to a

height of 50 cm from the tractor driver’s seat.

The Andex 393 with 3.9 m working width for fast

and effective raking action. A crank extension

for height adjustment from the tractor cab is

available for all types.

7

Andex 424-464 • ProLine

Built-In Reliability

High PerformanceVicon’s new generation ProLine single

rotor rakes offer a new gearbox design with

excellent working result. Features such

as oscillation dampers, tandem axles and

HydroLift height adjustment are hallmarks of

the new single rotor rakes.

Andex 463 ProLine

single rotor rake with 4.6 m

working width.

ProLine GearboxThe new Andex single rotor rakes are based

on the ProLine gearbox technology. These

machines offer working widths of 4.20 m and

4.60m respectively and are fi tted with the

renowned Vicon ProLine gearbox, with its

maintenance free oil bath solution.

The ProLine gearbox now offers better swath

formation. The shape of the Vicon hallmark,

the massive 40cm curve disc, has been

improved to allow the tine arms to leave the

crop faster, leaving a more uniform swath

shape.

Both rakes are standard fi tted with both 4

wheel tandem axles and oscillation dampers,

offering excellent ground contour following,

minimizing the amount of dirt collected in the

swath.

HydroLift ConceptA unique Vicon feature of the Andex 424 and

464 is the HydroLift concept. It is a hydraulic

height adjustment system that allows the

driver to quickly adjust working height to

different ground conditions from the tractor

cab.

8

As an option these rakes can be supplied with a

third wheel, to ensure even better fl otation.

Oscillation dampers ensure excellent running

characteristics.

Hydrolift height adjustment.Infi nitely variable cam track adjustment allows

fi ne tuning, to obtain optimum raking and swath

formation according to crop conditions.

Tine arms can be easily removed.

For transport or storage, the rotor guard frames are folded up close to the main frame, locking

automatically into position. An assistor spring linked to the swath board reduces the effort required.

9

Andex 713T VARIO-713T EVO • CompactLine

The Flexible Raking Solution

Flexible RakingThe Andex 713T VARIO and 713T EVO are

designed for maximum flexibility for raking in

different conditions. The twin rotors, working

independently from each other, makes it

possible to collect either one large swath or

two smaller swaths. Alternatively the rakes

can place two large swaths into one, allowing

a total of up to 12.5 m crop to be gathered

into one.

VARIO or EVO specificationThe VARIO version also offers the patented

SideShift system as an option, which

comprises electro-hydraulic control of all

functions, as well as 12 tine arms on the rear

rotor.

Vicon SideShiftA special feature on the Andex 713T is the

possibility to sideshift both rotors - both

front and the rear - from the tractor cab.

With this patented system, raking along field

boundaries or around trees is no problem -

as the tractor can run at a safe distance from

the obstacles. It is also possible to drive with

the tractor on already raked ground.

SideShift to the right - conveniently passing

trees.

SideShift to the left - raking without driving on

unraked crop.10

The new 713T VARIO with 7.1 m working width

and unique new SideShift device.

Vicon TerraLinkCompletely maintenance- and wear-free:

• Quiet machine running due to automatic

damping.

• Wide track bogies with large wheels

provide perfect ground contour following.

• Trailed axle configuration enhances quiet

running and reduces tractor input power.

• Superb tracking in road transport.

Easy Conversion from Working to Transport ConfigurationThere’s no need to remove tine arms:

moving the Andex 713T VARIO and 713T

EVO to transport position only requires a

simple operation on the control unit. The

swath deflector will automatically fold clear,

and transport width for Andex 713T VARIO

and 713T EVO is only 3.00 m (to reach

2.45 m, the tine arms can be removed).

With 50 cm lifting height, swaths can be driven

over with no problem at all. Rotors are lifted

using only a single acting valve.

Both rakes are capable of placing small night

swaths for hay crops.

11

Andex 694 VARIO-694 EVO • CompactLine

The Andex 694 Side Delivery RakeCompleting the CompactLine of side delivery

rakes, this compact and nimble rake features

a sturdy frame and the well-proven TerraLink

Quattro ground-following system. In addition

the VARIO model offers the possibility of

raking two separate swaths.

With a working width of 6.90 m, the machine

rakes up double swaths of up to 13.20 m.

There are 11 removable tine arms equipped

with 4 tines on the front and 12 arms with 5

tines on the rear rotor in order to compensate

for the higher load going through the second

rotor.

A host of exciting details such as the well

thought-out continuous driveline make Andex

694 a universal machine that suits a wide

range of applications. Trailing boogie wheels

made for tight cornering, without the risk

of tilting the rotors and tines scraping the

ground. The two rotors provide generous

overlapping and the cam tracks are matched

to each other to transfer the material

uniformly.

Andex 694 like all Vicon frame-based rakes,

features a headstock that turns through a 80°

angle to give superb tracking and superior

manoeuvrability.

CompactEffectiveness

12

Andex 774 • ProLine

Side Delivery Rakes

Double Up on EfficiencyThe new Andex 774 double rotor rake

delivers a working width of 7.70 m. The side

delivery concept adds excellent flexibility in

swath formation and allows you to collect

crop from a working width of up to 15 m

into one swath. The high build main frame

concept offers excellent ground clearance

in headland position (40 cm). Actively

steered wheels allow sharp turning, both

on headlands and during transport when

passing narrow gate ways.

The low position of the rear frame, moves the gravity point close to the ground for excellent stability. The side delivery concept allows you to collect

crop from 15m into a single swath.

Andex 774 is fitted with the renowned Vicon

ProLine gearbox, with its maintenance-free

oil bath solution. The shape of the Vicon

hallmark, the massive 40cm curve disc,

allows the tine arms to leave the crop faster,

leaving a more uniform swath shape. In

addition the rotors have been upgraded to

12 tine arms on the front rotor, each with 4

tines, and 13 tine arms, each with 5 tines on

the rear rotor. This ensures more accurate

raking performance and allowing higher

forward speed.

The carrier frame features a lower position

of the rear frame, moving the gravity point

closer to the ground for improved stability.

The rotor wheels of the undercarriage are

positioned further to the back of the rotor for

improved ground contour following under

difficult circumstances. In addition Andex

774 is fitted with the Vicon TerraLink Quattro

wheel system for superb ground contour

followings. This system controls the rotor in 3

dimensions.

13

Andex 724-764 • CompactLine

Compact Design - High Performance

Centre Swath RakesVicon offers two cost-effective two rotor rakes

with strong design. The rakes produce a

nice even centre swath from raking widths of

between 6.2 and 7.8 m. They are mounted

on a strong and stable frame to ensure long

lifetime. Features such as actively steered

wheels, the TerraLink Quattro system and

hydraulically working width adjustment are

standard.

A spring ensures parallel lowering and lifting of

the rotors and prevents tines from digging into

the ground during headland operation.

Andex 724 and 764

double rotor rakes are

designed with durability in mind.

Unique ManoeuvrabilityThe rear carrier frame with controlled steering

facility allows tight turns on headlands and

loss free swathing even in awkwardly shaped

fi elds. When in headland position, Andex 724

and 764 shows an outstanding lifting height of

45cm, preventing swath damage. The ability

to make sharp turns up to 80° and the cross

stabilizer in the headstock are unique Vicon

features.

14

Andex 724 & 764Both new Andex double rotor rakes offer

hydraulically adjustable working width. This

enables varying the swath width from

1.20-1.90m, ensuring a perfect match to the

pick up width of loader wagons, balers and

foragers.

Andex 724 Hydro - Resetting the StandardThe new Andex 724 Hydro is fi tted

hydraulically operated axles on the main

frame, in order to lift and lower the machine

during transport and operation. This feature

signifi cantly reduces transport height by

45cm, allowing a transport height as low as

3.45m.

Add in features such as adjustable working

width of 6.2-7.2m, TerraLink Quattro ground

contour following and heavy duty carrier frame

design, and the result is low maintenance,

higher productivity and maximum operation

comfort.

All main functions, such as lifting and lowering

of main frame and rotors are operated from

the tractor cab, using an electro hydraulic

control terminal. It is also possible to pre-

select lift activation of the rotor units via

the terminal. Such an integrated solution is

offered only by Vicon.

The hydraulic adjustable rotors can be set

between 7.0 m...

…and 7.8 m working width.

Vicon centre swath rakes are converted

hydraulically for transport from the tractor cab.

To limit transport height further the tine arms can

be removed on the Andex 764. The swath board

is folding up automatically.

The Andex 764 is fitted with TerraLink Quattro for

excellent raking.

15

Andex 784-844 • ProLine

The Heavy Duty Rakes

Centre Swath RakesWith adjustable working widths of 7.0 to

7.8 m and 7.6 to 8.4 m these heavy duty

contractor specifi cation rakes provide the

swath formation capability to keep harvesting

operations running at their optimum output.

At the heart of both models is a heavy-duty

rotor head system. Proven to perform year

in, year out in heavy fi rst cut crops, they

are superbly engineered, with the crown

wheel and pinion assembly running in a fully

enclosed oil bath.

Vicon Sets New StandardsThe rear carrier frame with controlled

steering facility gives this rake excellent track

following characteristics, allowing tight turns

on headlands and loss free swathing even in

awkwardly shaped fi elds. Even if the rotors

are lifted on a steep slope, the steering

system reliably counteracts any deviation.

During headland turns the rotors are lifted no

less than 45cm from the ground to prevent

swath damage.

Raking with only one rotor.

Andex 844 with

fully enclosed gearbox and

hydraulically adjustable working width.

16

17

High Quality crop The fi ne tuned relation between tine

arm/ tine shape, rotor speed, curve disc

characteristics and rotor undercarriage

ensures reduced crop pollution, high

capacity and turf protection at the same time.

This is what makes the difference.

The hydraulic adjustable rotors can be set

between 7.6 m...

… and 8.4 m working width.

The Andex centre swath rakes are converted

hydraulically for transport position from the

tractor cab. Tine arms are removeable.

The ability to make sharp turns up to 80° and

the cross stabilizer in the headstock are unique

Vicon features. Convenient for turning on

headlands with perfect ground clearance.

The Andex 784 and 844 are the perfect rakes for

producing swaths with big balers, as the swaths

it produces are large and evenly formed.

17

Andex 1103 • ProLine

High Flexibility and Performance

11 m Working PowerVicon 1103 - for the high performance

segment, normally covered by more expensive

four rotor rakes. Easy operation, excellent

manoeuvrability and a heavy duty design

characterize this machine. Despite a working

width of 11 m, the rake is very compact and

manoeuvrable in the field.

Standard equipment on the Andex 1103 includes

the maintenance-free TerraLink system, for

superb ground following.

TerraLink QuattroThe Andex 1103 is fitted with the TerraLink

Quattro system, offering perfect ground

contour followings. A unique combination of an

undercarriage with 6 wheels, and a specially

designed rotor suspension, ensures a superb

raking performance, even at high forward

speed and with big rotor diameter.

The Andex 1103, with up

to 11 m working width, designed for

heavy duty operation and maximum performance.

18

Adjustable Rotor HeightHydraulic height adjustment of the rotors to

suit the length of stubble or ground conditions,

along with hydraulic suspension to reduce

ground pressure.

Adjustable Working WidthHydraulically adjustable working width/swath

width to be set between 9.6 & 10.9 m.

Active wheel steering, allowing sharp turns on

headlands and during transport.

The Andex 1103 is equipped with an operator’s

box which includes all hydraulic functions of the

machines. All functions can be pre-selected and

then executed by operating the valve on the tractor.

Even the transport lock is operated hydraulically.

Easy OperationThe new Andex 1103 is designed for easy

operation, with a number of features, making

the working day as comfortable as possible.

15 Tine Arms per RotorWith 15 double tangential tine arms and 4

double tines per arm, the Andex 1103 is well

equipped for maximum raking performance.

The high tine frequency ensures clean raking

performance, even at reduced rpm and high

forward speed.

To reach a transport height below 4 m, the tine

arms can be removed and placed safely on the

carrier frame.

19

Andex 1504 • ProLine

15 m Working Width

15 m Working WidthThe Andex 1504 with 15 m working width is

designed for high output and heavy use. It

is fitted with a total of 56 tine arms and 254

tines. Four rotors, each fitted with 13/15 tine

arms and 4/5 tines per arm.

Brakes and TyresA choice of tyre sizes (550/45 R22.5) not

only ensures gentle treatment of the ground,

but also makes for excellent stability both

in the field and on the road. Hydraulic or

pneumatic brakes permit road speeds up to

50 km/h, so it takes minimum time to move

the machine from one field to another.

A Superbly Manoeuvrable UnitThe 2-pt headstock allows a turning angle

up to 80° and the steered wheel axles

ensure these Vicon rakes have unequalled

manoeuvrability. Despite a total length of

9.6 m, even narrow gateways or approach

lanes to fields are easily negotiated.

Optimal Ground Pressure at all TimesHydraulic ground pressure control means

constant and adjustable pressure on the

rotors regardless of their position on the

carrier frame. Free mobililty in three planes

combined with six steered twin wheels per

rotor give each rake head perfect ground

following ability for the cleanest possible

raking performance. Each rotor can be independently set for height

using the hydraulic system.

20

The Andex 1503 is available with the Focus

or IsoMatch Tellus control terminals. The

Focus terminal is an easy to learn and

very intuitive control terminal with focus on

functionality and operating simplicity.

The IsoMatch Tellus is the new virtual

terminal, offering 2 interface screens in 1

terminal. The large 12” easily programmable

touch screen offers ergonomic use.

Adjustable Working WidthRaking width can be continuously varied on

the move between 9.5 m and 15 m. Raking

width can be matched to the density of crop

to obtain an evenly shaped and equally

wide swath over the full length. You can

independently steer an outside rotor around

an obstacle such as a pole or tree without

having to change travel direction with the

complete machine.

Everything Under Control with ISOBUS TechnologyThe Andex 1504 is fully ISOBUS 11783

compliant. This means that it will plug directly

into an ISOBUS compatible tractor without

the need for a separate terminal.

Kverneland Group Mechatronics lead the

fi eld in the implementation of the ISOBUS

standard and is a founding member of the

Agricultural Electronics Federation (AEF),

which continues to develop and promote ISO

technology in agriculture.

The two outer rotors can be adjusted individually

to match a working width between 9.5-15 m.

Hydraulic adjustment of swath width.

Fast and easy folding mechanism.

With its clever folding mechanism the total

height remains below 4 m - despite a rotor

diameter of 3.8 m! And there’s no need to remove

tine arms for road transport.

The Andex 1504 can optionally be supplied

with active steering wheel axles for excellent

manoeuvrability.

The 2-pt headstock allows a turning angle up to

80º.

Control Terminals

Take Full ControlThe following functions can be operated

with the IsoMatch tellus terminal:

• Swath width indication (front and rear)

in meters.

• Programmable lifting height of rotors.

• Automatic selection of transport or

working position by pressing an icon.

• Three different suspension settings of

front rotors selectable.

• Separate lifting of left or right front rotor

along with controllable swath width.

• Independent setting of rotor height via

symbols on the screen.

21

Andex 323 353 393 424 423T 433 464 694 VARIO 694 EVO 713T VARIO 713T EVO 724 724 Hydro 764 774 784 844 1103 1504

Dimensions/weights

Working width (m) 3.20 3.50 3.90 4.20 4.20 4.30 4.60 6.90/7.70 6.90 6.60/7.10* 6.60/7.10 6.20-7.20 6.20/7.20 7.00/7.80 7.70/8.40* 7.00-7.80 7.60-8.40 9.30-10.90 9.50/15.00

Working width (ft) (10’6”) (11’6”) (12’10”) (13’9”) (13’9”) (14’1”) (15’1”) (22’8”/25’3”) (22’8”) (21’8”23’4”) (21’8”23’4”) (20’4”/23’6”) (20’4”/23’6”) (23’/25’7”) (25’3”/27’7”) (23”-25’7”) (24’11”-27’7”) (30’6”-35’9”) (31’2”/49’3”)

Transport width (m/ft) 1.60 (5’3”) 1.75 (5’9”) 1.75 (5’9”) 1.75 (5’9”) 2.00 (6’7”) 2.10 (6’11”) 2.15 (7’1”) 2.85 (9’4”) 2.85 (9’4”) 3.00 (9’10”) 3.00 (9’10”) 2.80 (9’2”) 2.80 (9’2”) 2.80 (9’2”) 2.85 (9’4”) 2.80 (9’2”) 2.80 (9’2”) 2.90 (9’6”) 3.00 (9’10”)

Transport length (m/ft) 3.10 (10’2”) 3.35 (11’) 3.60 (11’10”) 3.15 (10’3”) 3.90 (12’10”) 3.85 (12’8”) 3.35 (11’) 8.45 (27’9”) 8.45 (27’9”) 7.40** (24’3”) 7.40** (24’3”) 5.90 (19’4”) 5.90 (19’4”) 5.90 (19’4”) 8.90 (29’2”) 5.90 (19’4”) 6.25 (20’6”) 7.30 (23’11”) 9.20 (30’2”)

Parking height (m) - - - - - - - 3.45/4.10 3.45/4.10 - - 3.85 3.45**/3.95 3.45**/4.10 3.20**/4.10 3.45**/4.10 3.45**/4.10 3.85**/5.00 3.45**/4.00

Parking height (ft) - - - - - - - (11’3”/13’5”) (11’3”/13’5”) - - (12’6”) (11’4”/12’9”) (11’4”/13’5”) (10’6”/13’5”) (11’4”/13’5”) (11’4”/13’5”) (12’8”/16’5”) (11’4”/13’1”)

Weight (kg) 315 420 460 640 570 480 670 1930 1740 1400 1350 1600 1600 1640 2160 1700 1950 2865 5660

Weight (lb) (694) (928) (1014) (1410) (1256) (1058) (1477) (4255) (3836) (3086) (2976) (3527) (3527) (3615) (4762) (3748) (4300) (6316) (12478)

Swath width (m) 1.20-1.90 1.20-1.90 1.30-1.90 1.30-1.90 1.40-2.10 1.40-2.70

Swath width (ft) (3’11”-6’3”) (3’11”-6’3”) (3’11”-6’3”) (4’2”-6’3”) (4’7”-6’11”) (4’7”-8’10”)

Capacity theo. (ha/h) 3.5 3.9 4.3 4.6 4.6 4.7 5.1 7.6 7.6 7.3 7.3 7.5 7.5 8.4 8.5 8.6 9.2 12 16.5

Hitching system

Pivoting 3-pt headstock (cat.) 1/2 1/2 1/2 2 - 1/2 2 - - - - - - - - - - - -

Lower links (2-pt.) - - - - - - - - - - - 2 2 2 2 2 2 2 2

Linkage drawbar - - - - • - - • • • • - - - - - - - -

Gauge wheel 16° o o o o o o o o o • • - - - - - - - -

Rotors/Tine arms/Tines

Rotor diameter (m) 2.60 2.80 3.05 3.35 3.35 3.35 3.65 3.35 3.35 2.95 2.95 3.00 3.00 3.35 3.65 3.35 3.65 4.55 3.85

Rotor diameter (ft) (8’6”) (9’2”) (10’0”) (11’) (11’) (11’) (12’) (11’) (11’) (9’7”) (9’7”) (9’10”) (9’10”) (11’) (11’4”/12’) (11’) (12’) (14’11”) (12’8”)

Swath delivery left left left left left left left 1-2x left left 1-2x left 1x2x left centre centre centre 1-2x left centre centre centre centre

Number of rotors 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 4

Number of arms per rotor 9 10 11 12 11 12 13 11/12 11/12 11/12 11/12 11 11 11 12/13 2x11 2x12 2x15 13/15

Number of double tines/arm 3 4 4 4 4 4 4 4/5 4/5 4 4 4 4 4 4/5 4 4 4 4/5

Tine diameter (mm) 9 9 9 10 9 9 10 9 9 9 9 9 9 9 10 10 10 10 10

Continuous cam track - - - • - - • - - - - - - - • • • • •

Detachable tine arms • • • • • • • - - • • - - o • • • • •

Height adjustment rack trail mech. mech. hydr./mech. mech. mech. hydr./mech. mech. mech. hydr./mech. hydr./mech. mech. mech. mech. mech. mech. mech. mech.•/elec. o mech.•

Wheels and axles

Tyre (rotors) 15x6.00-6 16x6.50-8 16x6.50-8 16x6.50-8 18.5x8.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 18.5x8.50-8 18.5x8.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8

Fixed tandem axle o o o • • o • • • o o o o TerraLink TerraLink TerraLink TerraLink Terra Terra

Pivoting tandem axle - - - o - - o - - - - - - Quattro Quattro Quattro Quattro Contact Contact

Stand. tyres (carrying frame) - - - - - - - 10.0/75-15.3 10.0/75-15.3 - - 10.0/75-15.3 10.0/75-15.3 10.0/75-15.3 11.5/80-15.3 10.0/75-15.3 11.5/80-15.3 11.5/80-15.3 500/50-17

Opt. tyres (carrying frame) - - - - - - - - - - - - - - - - - - 550/45-22.5

Optional equipment

Carrier arm compensating o o o • - o • - - - - - - - - - - - -

Locking catch for slopes o o o • - o • - - - - - - - - - - - -

Tyres - - - - - - - - - - - o o - - - - 380/55-17 550/45-22.5

Safety accessories

Warning panels o o o o o o o • • • • - - • • • • • •

Road lights o o o o o o o • • • • - - • • • • • •

• = standard o = optional - = not available * = double swath

Technical Specifications

22

Andex 323 353 393 424 423T 433 464 694 VARIO 694 EVO 713T VARIO 713T EVO 724 724 Hydro 764 774 784 844 1103 1504

Dimensions/weights

Working width (m) 3.20 3.50 3.90 4.20 4.20 4.30 4.60 6.90/7.70 6.90 6.60/7.10* 6.60/7.10 6.20-7.20 6.20/7.20 7.00/7.80 7.70/8.40* 7.00-7.80 7.60-8.40 9.30-10.90 9.50/15.00

Working width (ft) (10’6”) (11’6”) (12’10”) (13’9”) (13’9”) (14’1”) (15’1”) (22’8”/25’3”) (22’8”) (21’8”23’4”) (21’8”23’4”) (20’4”/23’6”) (20’4”/23’6”) (23’/25’7”) (25’3”/27’7”) (23”-25’7”) (24’11”-27’7”) (30’6”-35’9”) (31’2”/49’3”)

Transport width (m/ft) 1.60 (5’3”) 1.75 (5’9”) 1.75 (5’9”) 1.75 (5’9”) 2.00 (6’7”) 2.10 (6’11”) 2.15 (7’1”) 2.85 (9’4”) 2.85 (9’4”) 3.00 (9’10”) 3.00 (9’10”) 2.80 (9’2”) 2.80 (9’2”) 2.80 (9’2”) 2.85 (9’4”) 2.80 (9’2”) 2.80 (9’2”) 2.90 (9’6”) 3.00 (9’10”)

Transport length (m/ft) 3.10 (10’2”) 3.35 (11’) 3.60 (11’10”) 3.15 (10’3”) 3.90 (12’10”) 3.85 (12’8”) 3.35 (11’) 8.45 (27’9”) 8.45 (27’9”) 7.40** (24’3”) 7.40** (24’3”) 5.90 (19’4”) 5.90 (19’4”) 5.90 (19’4”) 8.90 (29’2”) 5.90 (19’4”) 6.25 (20’6”) 7.30 (23’11”) 9.20 (30’2”)

Parking height (m) - - - - - - - 3.45/4.10 3.45/4.10 - - 3.85 3.45**/3.95 3.45**/4.10 3.20**/4.10 3.45**/4.10 3.45**/4.10 3.85**/5.00 3.45**/4.00

Parking height (ft) - - - - - - - (11’3”/13’5”) (11’3”/13’5”) - - (12’6”) (11’4”/12’9”) (11’4”/13’5”) (10’6”/13’5”) (11’4”/13’5”) (11’4”/13’5”) (12’8”/16’5”) (11’4”/13’1”)

Weight (kg) 315 420 460 640 570 480 670 1930 1740 1400 1350 1600 1600 1640 2160 1700 1950 2865 5660

Weight (lb) (694) (928) (1014) (1410) (1256) (1058) (1477) (4255) (3836) (3086) (2976) (3527) (3527) (3615) (4762) (3748) (4300) (6316) (12478)

Swath width (m) 1.20-1.90 1.20-1.90 1.30-1.90 1.30-1.90 1.40-2.10 1.40-2.70

Swath width (ft) (3’11”-6’3”) (3’11”-6’3”) (3’11”-6’3”) (4’2”-6’3”) (4’7”-6’11”) (4’7”-8’10”)

Capacity theo. (ha/h) 3.5 3.9 4.3 4.6 4.6 4.7 5.1 7.6 7.6 7.3 7.3 7.5 7.5 8.4 8.5 8.6 9.2 12 16.5

Hitching system

Pivoting 3-pt headstock (cat.) 1/2 1/2 1/2 2 - 1/2 2 - - - - - - - - - - - -

Lower links (2-pt.) - - - - - - - - - - - 2 2 2 2 2 2 2 2

Linkage drawbar - - - - • - - • • • • - - - - - - - -

Gauge wheel 16° o o o o o o o o o • • - - - - - - - -

Rotors/Tine arms/Tines

Rotor diameter (m) 2.60 2.80 3.05 3.35 3.35 3.35 3.65 3.35 3.35 2.95 2.95 3.00 3.00 3.35 3.65 3.35 3.65 4.55 3.85

Rotor diameter (ft) (8’6”) (9’2”) (10’0”) (11’) (11’) (11’) (12’) (11’) (11’) (9’7”) (9’7”) (9’10”) (9’10”) (11’) (11’4”/12’) (11’) (12’) (14’11”) (12’8”)

Swath delivery left left left left left left left 1-2x left left 1-2x left 1x2x left centre centre centre 1-2x left centre centre centre centre

Number of rotors 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 4

Number of arms per rotor 9 10 11 12 11 12 13 11/12 11/12 11/12 11/12 11 11 11 12/13 2x11 2x12 2x15 13/15

Number of double tines/arm 3 4 4 4 4 4 4 4/5 4/5 4 4 4 4 4 4/5 4 4 4 4/5

Tine diameter (mm) 9 9 9 10 9 9 10 9 9 9 9 9 9 9 10 10 10 10 10

Continuous cam track - - - • - - • - - - - - - - • • • • •

Detachable tine arms • • • • • • • - - • • - - o • • • • •

Height adjustment rack trail mech. mech. hydr./mech. mech. mech. hydr./mech. mech. mech. hydr./mech. hydr./mech. mech. mech. mech. mech. mech. mech. mech.•/elec. o mech.•

Wheels and axles

Tyre (rotors) 15x6.00-6 16x6.50-8 16x6.50-8 16x6.50-8 18.5x8.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 18.5x8.50-8 18.5x8.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8

Fixed tandem axle o o o • • o • • • o o o o TerraLink TerraLink TerraLink TerraLink Terra Terra

Pivoting tandem axle - - - o - - o - - - - - - Quattro Quattro Quattro Quattro Contact Contact

Stand. tyres (carrying frame) - - - - - - - 10.0/75-15.3 10.0/75-15.3 - - 10.0/75-15.3 10.0/75-15.3 10.0/75-15.3 11.5/80-15.3 10.0/75-15.3 11.5/80-15.3 11.5/80-15.3 500/50-17

Opt. tyres (carrying frame) - - - - - - - - - - - - - - - - - - 550/45-22.5

Optional equipment

Carrier arm compensating o o o • - o • - - - - - - - - - - - -

Locking catch for slopes o o o • - o • - - - - - - - - - - - -

Tyres - - - - - - - - - - - o o - - - - 380/55-17 550/45-22.5

Safety accessories

Warning panels o o o o o o o • • • • - - • • • • • •

Road lights o o o o o o o • • • • - - • • • • • •

• = standard o = optional - = not available * = double swath

Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purpose, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Gottmadingen N.V.

23

F-1

530

-UK

Kverneland GroupKverneland Group is a leading international company developing, producing and distributing agricultural machinery and services.

Strong focus on innovation allows us to provide a unique and broad product range with high quality. Kverneland Group offers an extensive package of systems and solutions to the profes-sional farming community. The offering covers soil preparation, seeding, forage- and bale equipment, spreading and spraying.

KR

OG

AG

ER

11.2

011

Original Spare PartsKverneland Group spare parts are designed to give reliable, safe and optimal machinery performance - whilst ensuring a low cost life-cycle. High quality standards are achieved by using innovative production methods and patented processes in all our production sites.

Kverneland Group has a very professional network of partners to support you with service, technical knowledge and genuine parts. To assist our partners, we provide high quality spare parts and an effi cient spare parts distribution worldwide.

Kverneland Group UK Ltd.Walkers Lane, Lea Green, St. HelensMerseyside, WA9 4AFPhone + 44 1744 8532 00

Kverneland Group Ireland Ltd.Hebron Industrial EstateKilkenny, IrelandPhone + 353 56 51597

Kverneland Group Canada Inc.1200, rue RocheleauDrummondville (Québec), J2C 5Y3, CanadaPhone +1 819 477 2055

www.vicon.eu