AnchorZip 10ROV Suction Anchor Pump

www.scorpionsubsea.com

Document: 0712-SOM-00002, Issue: 01

The AnchorZip 10 incorporates many advancesdeveloped from several years of producingTritech's industry standard range of ROVmounted jetting and excavation systems.

Specifically designed for ROV deployment, theAnchorZip 10 will interface with most workvehicle hydraulic systems. Vehicles fitted withthe AnchorZip 10 will offer a very quick and costeffective way of installing and removing suctionanchors. Output pressures may be regulated toensure that differential pressures remain withinthe structural limits of all types of suction anchor.

Flow reversal for anchor recovery is achievedsimply by sliding the motor and top assemblyfrom the input to the output side of the centrifugalpump.

Safe and reliable suction anchorinstallation and removalThe Tritech AnchorZip 10 is a unique productwhich has been developed using the highlysuccessful ZipPump and ZipJet technologies.The AnchorZip 10 is a heavy duty suction anchorpump designed for work-class vehicles able toproduce 25hp of hydraulic power.

Benefits• High efficiency• High performance• Easily interfaced• Proven ZipJet technology• Worldwide support

Features• Flow reversal for anchor recovery• Variable suction release valve preset• Durable moving body design

Applications• Deploy/recover large suction anchors• Work-class ROV mounting

Specification

Specifications subject to change according to a policy of continual development.

Marketed by: Scorpion Subsea604 Greenwood St.Morgan City, LA 70380

Document: 0712-SOM-00002, Issue: 01

Specification

452

315

Not to scale, dimensions in mm.

290

110

Ø72

4 off M16 x 2 on a 150mm PCD

Hydraulic InputSI Units US Units Other

Maximum input pressure 27.6MPa 4000psi 276 barMaximum input flow 0.001167m³·s-1 15 gallons per minute 70 litres per minute

Minimum actuator pressure 7MPa 1015psi 70 bar

OutputSI Units US Units Other

Typical differential pressure 950kPa 140psi 9.5 barTypical suction flow 0.0222m³·s-1 at 750kPa 352 gallons per minute at 109psi 80m³·hr-1 at 7.5 bar

Nozzle and Hose DimensionsSI Units US Units

Minimum hose diameter 72mm (internal diameter) 2.84" (internal diameter)Anchor port Square flange with 72mm port Square flange with 2.84" port

Weight and MaterialsSI Units US Units

Weight in air 30kg 66lbWeight in water 14kg 31lbMotor Parker F11 - 10Materials UHMWPE, stainless steel, cast nylon