anchorage improvement in cfrp structural …...concrete cover and fill with same epoxy adhesive...
TRANSCRIPT
![Page 1: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/1.jpg)
Anchorage Improvement in CFRPStructural Strengthening
Prepared By: Khiam Sarwar C.E.O Prepared For: ICRI Fall Convention
Dated: 09-11-2018Email: [email protected] | [email protected]
Website: www.fawchem.com
![Page 2: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/2.jpg)
DescriptionCFRP (Carbon Fiber Reinforced Polymer) materials are widely used forstrengthening of RCC Members like Columns, Beams, Slabs, Foundations, Shear Walls, Silos etc. as External Strengthening System. Anchorage Capacity of CFRP materials can be improved by the following two techniques.
1- Using Epoxy Adhesive of Different Densities. 2- Increasing Anchorage Depth of Epoxy Adhesive
![Page 3: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/3.jpg)
2. Increasing Anchorage Depth of Epoxy Adhesives The CFRP Strengthening System is entirely based upon bond strength of Epoxy Adhesives. Sometimes the concrete surface Shear strength is lesser than expected and can cause CFRP De-Lamination. If we develop holes of nominal depth in concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding or use CFRP Anchor Pins we can increase the Anchorage Capacity of Strengthening System. By increasing Anchorage Capacity we can use the unused load bearing reserve of CFRP Tensile Strength and can manage to use lesser CFRP materials to strengthen the buildings.
1. Using Epoxy Adhesives of Different DensitiesEpoxy Adhesives are used for fixing of CFRP Laminates to Concrete, and as Saturating Resins for Carbon Fiber Fabrics to Concrete and as a fixing material for NSM (Near Surface Mounted) CFRP Bars to Concrete. For every case mentioned above, the Epoxy Resins mostly used have density ranging 1.08 kg/Lit - 1.65 kg/Lit. But for one case normally Density is not varied which leads to lesser efficiency. After grinding or Sandblasting the concrete surface it’s Roughness factor is increased. But, adhesive of higher density may not penetrate into Micro pores of roughened concrete surface, which may lead to cavitation and inhibit bonding. So if we use Epoxy adhesive of lesser density e.g. 1.08 kg/Lit as Primer then the surface can absorb Epoxy Adhesive and Enrich the bonding bridge at interface of Concrete and Epoxyadhesive for fixing of CFRP. Hence Anchorage/Slip Resistance of Overall CFRP Strengthening System isimproved.
![Page 4: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/4.jpg)
Light HouseStructural repair and strengthening
Before treatmentAfter treatment
![Page 5: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/5.jpg)
Before treatment After treatment
Complete Refurbishment
![Page 6: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/6.jpg)
Jetty Structure
![Page 7: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/7.jpg)
Damaged
Repaired
![Page 8: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/8.jpg)
Shear Strengthening
Flexural Strengthening
![Page 9: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/9.jpg)
Finished
![Page 10: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/10.jpg)
Bridge Strengthening
![Page 11: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/11.jpg)
BridgeStrengtheningFlexural Strengthening
Positive Side
Negative Side
![Page 12: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/12.jpg)
Pre Stressed CFRP
Bridge Strengthening
![Page 13: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/13.jpg)
High Rise Buildings
![Page 14: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/14.jpg)
Column Strengthening
High RiseBuildings
![Page 15: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/15.jpg)
SlabStrengthening
![Page 16: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/16.jpg)
Column Strengthening
InstitutionalStructures
![Page 17: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/17.jpg)
Cement Silo
![Page 18: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/18.jpg)
Beams and Slabs Strengthening
Industrial Strengthening
![Page 19: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/19.jpg)
1. Using Epoxy Adhesives of Different Densities
Our Density Variation in this case lies between 1.08 kg/Lit – 1.30 kg/Lit
![Page 20: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/20.jpg)
Type #1
![Page 21: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/21.jpg)
1- Grinding / Sandblasting
2- Cleaning
3- Epoxy Primer (1.08 Kg/lit)
4- Epoxy Adhesive + Saturator (1.16 Kg/lit)
5- Carbon fibre applicationfabric (Unidirectional)
6- Allowed to cure
7- Crushed (7214 psi)
![Page 22: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/22.jpg)
Type #2
![Page 23: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/23.jpg)
1- Primer (1.08 Kg/lit)
2- Adhesive + Saturator (1.16 Kg/lit)3- Carbon Fibre Fabric 300 Gsm
4- Curing 30 C
5- Crushing Strength (7992psi)
![Page 24: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/24.jpg)
Type #3
![Page 25: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/25.jpg)
1- Epoxy Primer (1.08 Kg/lit)
2- Epoxy Adhesive (1.3 Kg/lit)
3- Epoxy Saturator For Carbon Fibre (1.16 Kg/lit)
4- Allow to Cure
5- Crushing Strength (8162 psi)
![Page 26: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/26.jpg)
2. Increasing Anchorage Depth of Epoxy AdhesivesThe CFRP Strengthening System is entirely based upon bond strength of Epoxy Adhesives. Sometimes the concrete surface Shear strength is lesser than expected and can cause CFRP De-Lamination. If we develop holes of nominal depth in concrete cover and fill with same Epoxy Adhesive which we use for CFRPLaminate bonding, we can increase the Anchorage Capacity of Strengthening System. By increasing Anchorage Capacity we can use the unused load bearingreserve of CFRP Tensile Strength and can manage to use lesser CFRP materials to strengthen the buildings.
![Page 27: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/27.jpg)
Type #4
![Page 28: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/28.jpg)
Increasing AnchorageDepth1- Drilling the concrete
2- Filling the holes with adhesive (1.3kg/lit)
3- Epoxy Primer (1.08Kg/lit)
4- Epoxy Adhesive (1.3Kg/lit)
5- Carbon Fibre Application
7- Crushing (6789psi)
6- Curing 07 days
![Page 29: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/29.jpg)
Type #5
![Page 30: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/30.jpg)
Increasing AnchorageDepth + Application of CFRP PIN1- Drilling the concrete
2- Filling the holes with adhesive (1.3kg/lit)
3- Epoxy Primer (1.08 Kg/lit)
4- Epoxy Adhesive Saturation (1.3 Kg/lit)
5- Carbon Fibre Application
6- Fixing CFRP Pins in wet condition
7- Curing
8- Crushing (7108 psi)
![Page 31: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/31.jpg)
Type #6
![Page 32: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/32.jpg)
Combination Of Variable Density& CFRP Anchor Pins1- Drilling the holes
3- Epoxy Primer (1.08 Kg/lit)
2- Filling the holes with epoxy (1.3kg/lit)
4- Epoxy Adhesive (1.3 Kg/lit)
5- Carbon Fibre Application
6- Fixing CFRP Pins in wet condition
7- Curing
8- Crushing (8593psi)
![Page 33: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/33.jpg)
Un strengthened Concrete | 4000 PSI
Com
pres
sive
Str
engt
h
![Page 34: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/34.jpg)
Un strengthened Concrete | 2500 PSICo
mpr
essi
ve S
tren
gth
![Page 35: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/35.jpg)
ConclusionThe Anchorage capacity of CFRP Laminates and Amalgamates can be improved either by using Epoxy Adhesives of variable densities or by increasing Anchorage Depth of Epoxy Adhesives or by combination of both.
![Page 36: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/36.jpg)
Merits1- Lesser CFRP materials required for strengthening 2- Lesser time consumed for strengthening works of a building 3- Minimal weight added to the structure.4- Cost of Refurbishment / Re-strengthening projects can be reduced.5- Structures with low concrete strengths i.e. >2500 psi can also be Strengthened.6- Building codes for CFRP Strengthening can be revised.
Demerits1- Additional Cost of Epoxy Adhesives can be applied.2- Accuracy of Drilling is required so expertise are important
![Page 37: Anchorage Improvement in CFRP Structural …...concrete cover and fill with same Epoxy Adhesive which we use for CFRP Laminate bonding, we can increase the Anchorage Capacity of Strengthening](https://reader033.vdocuments.us/reader033/viewer/2022041607/5e3540958ce12c6a413c1827/html5/thumbnails/37.jpg)
Thank You!