analog transmission 01204325: data communication and computer networks asst. prof. chaiporn jaikaeo,...
TRANSCRIPT
Analog TransmissionAnalog Transmission
01204325: Data 01204325: Data Communication and Communication and Computer NetworksComputer Networks
Asst. Prof. Chaiporn Jaikaeo, Ph.D.Asst. Prof. Chaiporn Jaikaeo, [email protected]@ku.ac.th
http://www.cpe.ku.ac.th/~cpjhttp://www.cpe.ku.ac.th/~cpjComputer Engineering DepartmentComputer Engineering Department
Kasetsart University, Bangkok, ThailandKasetsart University, Bangkok, ThailandAdapted from lecture slides by Behrouz A. Forouzan© The McGraw-Hill Companies, Inc. All rights reserved
22
OutlineOutline Aspects of Digital-to-Analog Aspects of Digital-to-Analog
ConversionConversion Amplitude Shift KeyingAmplitude Shift Keying Frequency Shift KeyingFrequency Shift Keying Phase Shift KeyingPhase Shift Keying Quadrature Amplitude ModulationQuadrature Amplitude Modulation
33
Digital-to-Analog ConversionDigital-to-Analog Conversion Required to send digital data over a Required to send digital data over a
band-pass channelband-pass channel Also known as Also known as modulationmodulation
(band-pass channel)
44
Carrier SignalsCarrier Signals Carrier signalCarrier signal is a high-frequency is a high-frequency
signal acting as a base for signal acting as a base for information signalinformation signal
Also known as "Also known as "Carrier FrequencyCarrier Frequency""
55
General form: General form: xx((tt) =) = AA××sin(2sin(2ftft + + ))
periodT = 1/f
peakamplitude
time
signal strength
Sine Waves RevisitedSine Waves Revisited
phase / phase shift
66
Conversion TechniquesConversion Techniques
77
Bit Rate vs. Baud RateBit Rate vs. Baud Rate Bit rateBit rate the number of the number of bitsbits per second per second Baud rateBaud rate the number of the number of signal signal
elementselements per second. per second.
In the analog transmission of digital data, In the analog transmission of digital data, the baud rate is less than or equal to the the baud rate is less than or equal to the bit ratebit rate
88
An analog signal has a bit rate of 8000 bps and a baud rate of 1000 baud. How many data elements are carried by each signal element? How many different signal elements do we need?
SolutionIn this example, S = 1000, N = 8000, and r and L are unknown. We find first the value of r and then the value of L.
Example 5.2Example 5.2
99
Binary Amplitude Shift Binary Amplitude Shift KeyingKeying
Or Binary ASKOr Binary ASK Simplest form Simplest form On-Off Keying (OOK) On-Off Keying (OOK)
fc – Carrier frequency0 < d < 1
1010
Implementation of Binary Implementation of Binary ASKASK
1111
We have an available bandwidth of 100 kHz which spans from 200 to 300 kHz. What are the carrier frequency and the bit rate if we modulated our data by using ASK with d = 1?
SolutionThe middle of the bandwidth is located at 250 kHz. This means that our carrier frequency can be at fc = 250 kHz. We can use the formula for bandwidth to find the bit rate (with d = 1 and r = 1).
Example 5.3Example 5.3
1212
Full-Duplex ASKFull-Duplex ASK Bandwidth can be divided into two to Bandwidth can be divided into two to
support full-duplex communicationsupport full-duplex communication Two carrier frequencies are usedTwo carrier frequencies are used
1313
Binary Frequency Shift Binary Frequency Shift KeyingKeying
Or Binary FSKOr Binary FSK
1414
Implementation of Binary Implementation of Binary FSKFSK
1515
Multilevel FSKMultilevel FSK Use one frequency to send more Use one frequency to send more
than one bit at a timethan one bit at a time E.g., the whole bandwidth divided E.g., the whole bandwidth divided
into 8 frequency rangesinto 8 frequency ranges
1616
Binary Phase Shift KeyingBinary Phase Shift Keying Or Binary PSKOr Binary PSK
1717
Implementation of Binary Implementation of Binary PSKPSK
1818
Quadrature PSKQuadrature PSK Each signal element carries 2 bitsEach signal element carries 2 bits
1919
Implementation of QPSKImplementation of QPSK
2020
Find the bandwidth for a signal transmitting at 12 Mbps for QPSK. The value of d = 0.
SolutionFor QPSK, 2 bits is carried by one signal element. This means that r = 2. So the signal rate (baud rate) is S = N × (1/r) = 6 Mbaud. With a value of d = 0, we have B = S = 6 MHz.
Example 5.7Example 5.7
2121
Constellation DiagramsConstellation Diagrams A constellation diagram helps define A constellation diagram helps define
the amplitude and phase of a signal the amplitude and phase of a signal elementelement
2222
Example 5.8Example 5.8
Show the constellation diagrams for Show the constellation diagrams for OOK, BPSK, and QPSK modulationsOOK, BPSK, and QPSK modulations
2323
Constellation Diagram for 8-Constellation Diagram for 8-PSKPSK
2424
Quadrature Amplitude Quadrature Amplitude ModulationModulation
Or QAMOr QAM A combination of ASK and PSKA combination of ASK and PSK
2525
Telephone Line BandwidthTelephone Line Bandwidth
2626
V.32 and V.32bis Modem V.32 and V.32bis Modem StandardsStandards
2727
Analog-to-Analog Analog-to-Analog ConversionConversion
Process of transmitting analog Process of transmitting analog information by an analog signalinformation by an analog signal
Although the signal is already Although the signal is already analog, modulation is needed if a analog, modulation is needed if a band-pass channel is available to us. band-pass channel is available to us.
2828
Types of Analog-to-Analog Types of Analog-to-Analog ModulationsModulations
2929
Amplitude Modulation (AM)Amplitude Modulation (AM)
3030
AM Band AllocationAM Band Allocation
3131
Frequency Modulation (FM)Frequency Modulation (FM)
3232
FM Band AllocationFM Band Allocation
3333
Phase Modulation (PM)Phase Modulation (PM) Considered a variation of FMConsidered a variation of FM