Integration for perfection: distribution - protection - monitoring systemsThursday, 6 December 2012

An invitation

Distribution - Monitoring

Current Measurement System (CMS)

ABB CMS measures the current and allows you to precisely trace energy flows and triangulate where electricity consumption is too high. No space wasted here: everything is built into an 18-mm wide unit to enable exact and effective measurements.

Level of convenience: - Minimal space requirement. - Early detection of deviations. - User-friendly configuration. - Overload warning system. - A sensor for all types of current.

Protection - Distribution

SMISSLine Touch Proof (TP)

SMISSLine TP pluggable socket system has been designed so that changes can be carried out during ongoing operation.Today devices can be plugged in directly without the need for protection equipment.

Level of convenience: - Safe – load free plugging in and unplugging possible under power. - Flexible – rapid replacement, mixed-pole layout possible. - Economical – saves time and space thanks to the plug-in technology.

Distribution - Protection

Modular low voltage switchgear

The scalability is a technology trend today that enables electri- cal system to cover wide aspects of requirement, from the very basic switch- gear to the high end integrated

Motor Control Center and Power Distribution. Adding to the above, personal protection must be incorporated without compromise, e.g. Arc fault safety must be taking into consideration as one of the utmost priority. We would like to share this knowledge with you this advanced technology in this short session.

Monitoring - Billing

Electronic meter (EQ meter)

ABB’s sub-meters are the key to effectively managing energy; to know exactly when, where an how much is being used.

Perfomance: - Type tested and approved according to MID. - Accuracy class 0.5.

- Instrumentation function: I, V, Hz, Pf, THD, Kw, KVA, KVAR. - Single phase and 3-phase with direct connection up to 80A.

Three key drivers: - Fair cost allocation and distribution. - Reduction of electricity consumption. - Optimizing your electricity infrastructure.

Detail of eventDate 6 December 2012, Thursday Time 1.30 p.m. to 5.00 p.m.

PDU 3

Venue ABB Pte. Ltd. 2 Ayer Rajah Crescent Level 2, Auditorium Room Singapore 139935

Email lp.marketing@sg.abb.com

Telephone (65) 6776 5711

Contact Julia Tedy

RSVP http://bit.ly/TPbbod

Program highlights 1.30 p.m. Registration 1.45 p.m. Opening address 2.00 p.m. The requirement for high efficiency Power Distribution Unit (PDU) by Koh Nguang Siah, Product Marketing Manager, Low Voltage Product 3.00 p.m. New innovation and product showcase by Koh Nguang Siah, Product Marketing Manager, Low Voltage Product Division 3.30 p.m. Tea-break 3.45 p.m. Digital addressable measuring technology by Ong Peck Seng, Assistant Vice President Marketing, Low Voltage Products Division 4.45 p.m. Modular low voltage switchgear for power switchgear, motor control center and intelligent PDU by P.K. Srinivasan Iyer, Product Marketing Manager, Low Voltage Systems Division 5.15 p.m. Question and answer session 5.30 p.m. End session