an interface between r&d and applications may 28 & 29, 2013 … · hotel crowne plaza...
TRANSCRIPT
www.certech.be - [email protected]
An interface between R&D and applications
May 28 & 29, 2013Brussels, BELGIUM
Green polymer chemistry - New materials and additives - Innovative process or applications - Product development issues - Market developments
and expectations - Ecological performance - End of life options …
Certech is member of
From Biobased Polymers to Bioplastics
Dr. Nathalie Pécoul, Polymeric Materials Manager at SEB
Prof. Luc Avérous, ECPM-LIPHT, Strasbourg University
Dr. Gérard Liraut, Expert Leader for the “Polymers, Characteristics and Processing” at Renault
Dr. Lars Lundquist, Packaging Environmental Sustainability Expert at Nestlé
will present their vision, experience and expectations
Certech is member of
8h30 Welcome coffee and registration
9h00 Introduction to the conference
9h15 Opening Lecture: Future prospects for Bioplastics
James Philp, OECD
9h45 Invited Lecture: Bioplastics: Basics and the technical/
scientifi c trends
Prof. Luc Avérous, Strasbourg University
10h15 Minefi eld in the patent landscape
Paul-André Gollier, Pronovem
10h35 Q&A session
10h45 Coffee break - Poster session and exhibition
11h15 Experiences on 20 years of biopolymer testing and
certifi cation: challenges and new developments
Bruno de Wilde & Sam Deconinck, Organic Waste Systems
11h35 VALORIA: Preindustrial scale implementation of
wasterwater treatment sludge valorization route through
polyhydroxyalkanoate (PHA) production
Maria Albuquerque, VEOLIA Environnement Recherche et
Innovation
11h55 Environmental performance of bio-based polymers –
Bringing LCA down to earth
Roland Essel, nova-Institut
12h15 Q&A session
12h25 Lunch
14h00 Invited Lecture: Are bio-sourced polymers an opportunity
for SEB ?
Nathalie Pécoul, Groupe SEB
14h30 Roquette Biorefi nery: Today and tomorrow
Vincent Berthé, Roquette Frères
14h50 Biobased PLA: the heat is on! A biobased replacement
for PS, PET and PP in high temperature applications
François de Bie, PURAC
15h10 Bisphenol A substitution in structural adhesive by a
bio-based component: Evaluation of the adhesive,
water resistance and thermo-mechanical properties
Pierre Verge, Centre de Recherche Public Henri Tudor
15h30 Q&A session
15h45 Coffee break - Poster session and exhibition
16h15 Materials sell by properties! What sells PHB? Is there any-
thing PHB can do better than other bioplasts / thermoplasts ?
Urs Hänggi, BIOMER
16h35 SOLANYL and FLOURPLAST thermoplastic starch based
plastics and OPTINYL masterbatches:
Creating new opportunities for the bioplastic industry
Jeroen van Soest, Rodenburg Biopolymers
16h55 Biopolymer textile applications: shifting stability properties
using functional additives
Luc Ruys, CENTEXBEL
17h15 Q&A session
17h30 Summary and conclusions from fi rst day
17h45 End of day one followed by event and dinner
Tuesday 28th May
From Biobased Polymers to BioplasticsAn interface between R&D and applications - May 28 & 29, 2013 - Brussels, BELGIUM
www.certech.be - [email protected]
Certech is member of
From Biobased Polymers to Bioplastics
9h30 Invited Lecture: Bio-sourced materials:
risks or opportunities for automotive applications
Gérard Liraut, Renault
10h00 Biobased adhesives: when green chemistry meets
the material science of sticky things
Richard Vendamme, NITTO DENKO Europe
10h20 Emissions from PLA materials: food packaging and
automotive applications
Annabelle Cingöz, CERTECH
10h40 Q&A session
10h50 Coffee break - Poster session and exhibition
11h20 Reducing the Environmental Footprint of Polyurethanes
using Biosuccinium™ based Polyester Polyols
Luc Leemans, DSM
11h40 New renewable molecules for bio-based polymers
Stéphane Bernard & Ward Huybrechts, Oléon
12h00 Bioprepolymer for the use of automotive seating foam
Christophe Ponce, Huntsman Polyurethanes
12h20 Q&A session
12h30 Lunch
14h00 Invited Lecture: Packaging for food or food for packaging ?
The role of bioplastics in the Nestlé packaging portfolio.
Lars Lundquist, Nestlé
14h30 New renewable polyurethane adhesive for fl exible
packaging
Olivier Laferté, BOSTIK
14h50 Life cycle thinking approach for sustainable feedstock design
Houshang Kheradmand, The Dow Chemical Company
15h10 Agroboost: a collaborative project on biobased textiles with
controlled biodegradation
Isabelle Ferreira, IFTH
15h30 Towards fully green composites ?
Naïma Sallem, Université Catholique de Louvain
15h50 Q&A session
16h10 Concluding remarks
16h30 End of day two and farewell coffee
Wednesday 29th May
An interface between R&D and applications - May 28 & 29, 2013 - Brussels, BELGIUM
www.certech.be - [email protected]
Certech is member of
Registration formName: __________________________________________________________________
Company: ______________________________________________________________
E-mail: _________________________________________________________________
Tel: _____________________________________________________________________
Fax: _____________________________________________________________________
Address: _______________________________________________________________
__________________________________________________________________________
Invoicing address: ____________________________________________________
__________________________________________________________________________
Invoicing e-mail: ______________________________________________________
VAT number : __________________________________________________________
� 2 days (€ 600 + 21% VAT) incl. conference dinner
� 2 days student (€ 400 + 21% VAT)
� 2 days + table-top display (€ 1700 + 21% VAT)
� proceedings of the symposium (€ 250)
� speaker (free of charge):
I will attend the two days of the symposium: � yes � no
Please note that we proceed to electronic invoicing and that the fi elds VAT n°
and invoicing e-mail have to be fi lled otherwise your registration is not valid.
For printed version of the invoice 50€ will be charged.
Payment Method� Invoice my company� Payment with credit card:
� Mastercard � VISA
Signature:
Card number: _____________________________________________
Expiry date: ______________________________________________ `
Validation code: __________________________________________
Cardholder name: ________________________________________
RegistrationRegistration by post, fax: +32 (0)64 520 210 or e-mail: [email protected] deadline: May, 22th 2013. For further information, phone +32 (0)64 52 02 11 or visit our web site: www.certech.be
CancellationCharge for cancellation within 2 weeks to the opening day of the symposium: € 200. No refunds on cancellation received after May, 15th 2013.
VenueHOTEL Crowne Plaza Brussels City Centre “Le Palace”,rue Gineste, 3 - 1210 Brussels. Belgium.More info on the venue: www.crowneplazabrussels.be
PaymentCredit card (Visa, Mastercard). Bank transfer to ING-Seneffe 370-1128214-94 (IBAN: BE87.3701.1282.1494 BIC: BBRUBEBB), mentioning “bioplastics”. All bank charges will have to be paid by the participants. Payment in full must be received prior to the event.
Conference feesRegular: € 600 (+ 21 % VAT) including conference dinner.Student : € 400 (+21% VAT).The symposium fee covers full attendance to the symposium, proceedings of the technical papers and posters, lunches and coffee breaks. 21% of VAT is compulsory in Belgium.
Poster sessionCompanies and academics will have the opportunity to present their latest R&D developments via posters during the coffee breaks. If you wish to submit a poster, please contact [email protected]
Suppliers showcase€ 1700 (+ 21 % VAT). Includes delegation fee for 1 person.During the breaks, participants can visit tabletop displays presented by suppliers of equipments.If you are interested, please contact [email protected]
SponsoringIf you are interested, please contact [email protected]
www.certech.be - [email protected]