an in-depth look at reverse roll coating · an in-depth look at reverse roll coating john a....
TRANSCRIPT
![Page 1: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/1.jpg)
AN IN-DEPTH LOOK ATREVERSE ROLL COATING
John A. Pasquale, III
Senior Vice PresidentP.O. Box 377
Hawthorne, NJ 07507
![Page 2: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/2.jpg)
AGENDA• Operating Features - 3 Roll Reverse Roll
Coater
• Effect of Gap and Roll Speed on the Coating Process
• A Look Inside the Coating Gap
• The Role of Coating Properties
• Coating Defects – can and how are they overcome?
• Is it the Coater or the Coating?
![Page 3: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/3.jpg)
Nip Fed Reverse Roll Coater
Metering Roll
Applicator Roll
Carrier Roll
Doctoring Blades
Gap Adjusters
![Page 4: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/4.jpg)
Reverse Roll Coater
![Page 5: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/5.jpg)
Reverse Roll Coaters• Applicator roll operates at 1.2 -
2.5 times web speed to vary coating weight
• Metering roll operates from zero to web speed, based on coating rheology
• Useful for a wide range of coating thicknesses, viscosities and speeds
• Typical Coating Properties– Viscosity: 200 – 50,000 cps
– Wet thickness: .0008”- .018”
– Web speed: 25 – 1750 fpm
– Uniformity: 1% with precision rolls and bearings
Metering Roll
Applicator Roll
Carrier Roll
![Page 6: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/6.jpg)
Reverse Roll Coaters
• Coating applied and precisely metered onto applicator roll at the gap between the metering roll
and applicator roll
•Gap determines initial coating application
- It can be set manually or by the use of servomotors- Thickness gauge monitoring and control equipment can be added
![Page 7: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/7.jpg)
• Relationship of metering roll speed to applicator roll speed is a major factor
– Reverse metering flow is the key to thickness and quality
• A major advantage of using a reverse roll coater
– Increasing the speed ratio of metering roll (Vm) to applicator roll (Va) decreases coating thickness (to a point)
• Linear reduction related to ( 1 – Vm/Va )
– Metering roll to applicator roll speed ratio also affects the occurrence of coating defects for a particular coating
• When Vm/Va is too low, ribbing defects appear
• When Vm/Va is too great, cascading (seashoring) appears
Reverse Roll Coaters
![Page 8: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/8.jpg)
Forces developed in the gap of non-deformable rolls include the following:
• Viscous – based on coating rheology and the flow pattern geometry entering the roll gap
• Resistive – roll separating force developed when deforming the coating
• Operating – the external force required to maintain the roll gap during operation
• Capillary – the effect of surface tension in the curved roll gap
A Look Inside the Coating Gap
![Page 9: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/9.jpg)
The Role of Coating Properties
Each coating material has a
Capillary Number ( Ca )
Ca=mVA/s
where:m = viscosity
s = surface energy
VA= Applicator Roll Speed
![Page 10: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/10.jpg)
The Coating Window
Using the Reverse Roll Coating method there is a window or range of usable settings.
– This window is the region of Vm/Va (metering to applicator ratio) that produces a uniform coating.
• Below this ratio you will encounter ribbing.
– Transition to ribbing is gradual.
• Above this ratio cascading (herringbone or seashore) will occur cross web. The bead oscillates at a set frequency and can entrain air.
– This is a sharp change over.
![Page 11: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/11.jpg)
Operating Window Diagram
![Page 12: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/12.jpg)
Coating Defects• Increased Metering
ratio will linearly reduce coating thickness…to a point.
– Excessive metering to applicator ratio will move the wetting line to the upstream side of the gap which can cause-
• air entrainment
• cascading
• unpredictable coat weight
Low Metering Roll Speed/Ratio
Metering Roll
Applicator Roll
Metering Roll
Applicator Roll
High Metering Roll Speed/Ratio
![Page 13: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/13.jpg)
Cascade Defect
![Page 14: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/14.jpg)
• Ribbing develops when the flow in the coating zone becomes unstable
• It is a function of the hydrodynamic pressure gradient and surface tension that develops in the coating zone
• Gap and roll speed variation are the prime variants when applying a coating of specific viscosity at a given speed
• When gap is the major (or only) variant (forward roll, slot die, knife, etc) the onset of ribbing occurs more readily
• When gap and roll speed variation can be altered (as in differential offset gravure, reverse roll, etc) ribbing is more readily eliminated
• If ribbing can not be eliminated, it usually requires a change in the coating material rheology
• Ribbing develops when the flow in the coating zone becomes unstable
• It is a function of the hydrodynamic pressure gradient and surface tension that develops in the coating zone
• Gap and roll speed variation are the prime variants when applying a coating of specific viscosity at a given speed
• When gap is the major (or only) variant (forward roll, slot die, knife, etc) the onset of ribbing occurs more readily
• When gap and roll speed variation can be altered (as in differential offset gravure, reverse roll, etc) ribbing is more readily eliminated
• If ribbing can not be eliminated, it usually requires a change in the coating material rheology
Ribbing Defect
![Page 15: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/15.jpg)
Ribbing
![Page 16: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/16.jpg)
• This is always the “Big Question”
• Since you can alter the gap and roll speeds in a reverse roll coater, you have better control than when you use coaters that can change only one parameter.
• To deposit thin, high viscosity coatings, it may require the use of a five roll coater to get more film splits (photo follows).
• If you can not find an operating condition at which your coating runs well, you may have to change the coating properties to develop a different operating window.
• This is always the “Big Question”
• Since you can alter the gap and roll speeds in a reverse roll coater, you have better control than when you use coaters that can change only one parameter.
• To deposit thin, high viscosity coatings, it may require the use of a five roll coater to get more film splits (photo follows).
• If you can not find an operating condition at which your coating runs well, you may have to change the coating properties to develop a different operating window.
Is it the Coater or the Coating?
![Page 17: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/17.jpg)
Five Roll Coater
![Page 18: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/18.jpg)
REFERENCES
The following references were used, with permission of the authors:
1. “Principles of Roll Coating Equipment”, by John A. Pasquale III
2. “Reverse Roll Coating of PSA Adhesives”, by William Strong
Special thanks are extended to William Strong of National Adhesives who generously provided some of the data and visual materials he has compiled for his company as an Adhesive Coating and Drying specialist for 15 years.
![Page 19: AN IN-DEPTH LOOK AT REVERSE ROLL COATING · AN IN-DEPTH LOOK AT REVERSE ROLL COATING John A. Pasquale, III Senior Vice President P.O. Box 377 Hawthorne, NJ 07507](https://reader030.vdocuments.us/reader030/viewer/2022040311/5d52093488c993bf198b50ab/html5/thumbnails/19.jpg)
Questions or Comments?Questions or Comments?