yoke male study 1 1

Cubo#2545Phone: 754654654

Simulation of Yoke_maleDate: jueves, 04 de abril de 2013Designer: Ing. Max StarkStudy name: Study 1Analysis type: Static

Table of ContentsDescription...............................................1

Assumptions.............................................2

Model Information.....................................2

Study Properties.......................................3

Units.........................................................3

Material Properties...................................4

Loads and Fixtures...................................5

Connector Definitions...............................5

Contact Information..................................6

Mesh Information......................................7

Sensor Details..........................................8

Resultant Forces.......................................8

Beams......................................................9

Study Results..........................................10

Conclusion..............................................12

DescriptionNo Data

Analyzed with SolidWorks Simulation Simulation of Yoke_male 1

Cubo#2545 Ing. Max Stark

04/04/2013

Assumptions

Model Information

Model name: Yoke_male

Current Configuration: Default

Solid BodiesDocument Name and

ReferenceTreated As Volumetric Properties Document Path/Date

ModifiedChaflán1

Solid Body

Mass:0.528519 lbVolume:1.86361 in^3

Density:0.283599 lb/in^3

Weight:0.52816 lbf

\\SISTEMAS-PC\software\Curso\Lesson13\Case

Study\Yoke_male.sldprt

Apr 02 22:27:28 2012

Analyzed with SolidWorks Simulation Simulation of Yoke_male 2

Cubo#2545 Ing. Max Stark

04/04/2013

Study PropertiesStudy name Study 1

Analysis type Static

Mesh type Solid Mesh

Thermal Effect: On

Thermal option Include temperature loads

Zero strain temperature 298 Kelvin

Include fluid pressure effects from SolidWorks Flow Simulation

Off

Solver type FFEPlus

Inplane Effect: Off

Soft Spring: Off

Inertial Relief: Off

Incompatible bonding options Automatic

Large displacement Off

Compute free body forces On

Friction Off

Use Adaptive Method: Off

Result folder SolidWorks document (\\SISTEMAS-PC\software\Curso\Lesson13\Case Study)

UnitsUnit system: SI (MKS)

Length/Displacement mm

Temperature Kelvin

Angular velocity Rad/sec

Pressure/Stress N/m^2

Analyzed with SolidWorks Simulation Simulation of Yoke_male 3

Cubo#2545 Ing. Max Stark

04/04/2013

Material PropertiesModel Reference Properties Components

Name: ASTM A36 SteelModel type: Linear Elastic

IsotropicDefault failure

criterion:Unknown

Yield strength: 2.5e+008 N/m^2Tensile strength: 4e+008 N/m^2Elastic modulus: 2e+011 N/m^2Poisson's ratio: 0.26

Mass density: 7850 kg/m^3Shear modulus: 7.93e+010 N/m^2

SolidBody 1(Chaflán1)(Yoke_male)

Curve Data:N/A

Analyzed with SolidWorks Simulation Simulation of Yoke_male 4

Cubo#2545 Ing. Max Stark

04/04/2013

Loads and FixturesFixture name

Fixture Image Fixture Details

Fixed-1

Entities: 2 face(s)Type: Fixed Geometry

Resultant ForcesComponents X Y Z Resultant

Reaction force(N) 4994.1 -0.517212 0.357418 4994.1Reaction Moment(N-

m)0 0 0 0

Load name Load Image Load Details

Force-1

Entities: 1 face(s)Type: Apply normal force

Value: 5000 N

Connector DefinitionsNo Data

Analyzed with SolidWorks Simulation Simulation of Yoke_male 5

Cubo#2545 Ing. Max Stark

04/04/2013

Contact InformationNo Data

Mesh InformationMesh type Solid Mesh

Mesher Used: Curvature based mesh

Jacobian points 4 Points

Maximum element size 3.12677 mm

Minimum element size 3.12677 mm

Mesh Quality High

Mesh Information - DetailsTotal Nodes 15264

Total Elements 9812

Maximum Aspect Ratio 4.9034

% of elements with Aspect Ratio < 3 99.6

% of elements with Aspect Ratio > 10 0

% of distorted elements(Jacobian) 0

Time to complete mesh(hh;mm;ss): 00:00:05

Computer name: M011-PC

Analyzed with SolidWorks Simulation Simulation of Yoke_male 6

Cubo#2545 Ing. Max Stark

04/04/2013

Sensor DetailsNo Data

Analyzed with SolidWorks Simulation Simulation of Yoke_male 7

Cubo#2545 Ing. Max Stark

04/04/2013

Resultant Forces

Reaction ForcesSelection set

Units Sum XSum Y Sum Z Resultant

Entire Model N 4994.1 -0.517212 0.357418 4994.1

Reaction MomentsSelection set

Units Sum XSum Y Sum Z Resultant

Entire Model N-m 0 0 0 0

BeamsNo Data

Analyzed with SolidWorks Simulation Simulation of Yoke_male 8

Cubo#2545 Ing. Max Stark

04/04/2013

Study Results

Name Type Min MaxStress1 VON: von Mises Stress 501160 N/m^2

Node: 1783.39481e+008 N/m^2Node: 2596

Yoke_male-Study 1-Stress-Stress1

Name Type Min MaxDisplacement1 URES: Resultant Displacement 0 mm

Node: 2390.185441 mmNode: 128

Analyzed with SolidWorks Simulation Simulation of Yoke_male 9

Cubo#2545 Ing. Max Stark

04/04/2013

Name Type Min Max

Yoke_male-Study 1-Displacement-Displacement1

Name Type Min MaxStrain1 ESTRN: Equivalent Strain 2.79517e-006

Element: 83170.00115127Element: 6319

Analyzed with SolidWorks Simulation Simulation of Yoke_male 10

Cubo#2545 Ing. Max Stark

04/04/2013

Name Type Min Max

Yoke_male-Study 1-Strain-Strain1

Conclusion

Analyzed with SolidWorks Simulation Simulation of Yoke_male 11