yehi

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 1/14

Measurement Systems Analysis

Measurements

Chapter Four 

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 2/14

Measurement Systems Analysis 

Measurement accuracy andprecision

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 3/14

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 4/14

Measurement Systems Analysis 

Measurement SystemsAnalysis

222

gage product observed        

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 5/14

Measurement Systems Analysis 

Measured Value

Measured Value = ƒ(TV + Ac + Rep + Rpr) 

TV = true value

 Ac = gauge accuracyRep = gauge repeatabilityRpr = gauge reproducibility 

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 6/14

Measurement Systems Analysis 

Measurement systemcomponents Equipment or gage

• Type of gage

•

 Attribute: go-no go, vision systems(part present or not present)

• Variable: calipers, probe, coordinate

measurement machines• Unit of measurement - usually at least 1/10

of tolerance

Operator and operating instructions

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 7/14Measurement Systems Analysis 

Measurement error 

Measurement error is considered to be

the difference between a value measured

and the true value.

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 8/14Measurement Systems Analysis 

Types of gage variation

Systematic variation

•  Accuracy - improper calibration

•

Reproducibility - different persons usingsame equipment with different techniques

Periodic variation

•

Stability - wear, deterioration, environment Random variation

• Repeatability (unable to locate part to be

measured)

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 9/14Measurement Systems Analysis 

Types of measurementvariation Accuracy

Stability

Reproducibility

Repeatability

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 10/14Measurement Systems Analysis 

AccuracyDifference between the true average and theobserved average.

(True average may be obtained by using a more precisemeasuring tool)

True average

Observedaverage

Accuracy ormean bias

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 11/14Measurement Systems Analysis 

Stability

Time 1 Time 2

The difference in the average of at least 2 sets ofmeasurements obtained with a gage over time.

Stability

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 12/14Measurement Systems Analysis 

Reproducibility

Operator B

Operator A

Operator C

True Average

Variation in average of measurements made bydifferent operators using the same gage measuringthe same part.

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 13/14

7/29/2019 yehi

http://slidepdf.com/reader/full/yehi 14/14Measurement Systems Analysis

How do we improve gagecapability? Reproducibility

• operator training, or 

•

more clearly define measurement scaleavailable to the operator 

Repeatability

•

gage maintenance• gage redesign to better fit application