xtreme - sagola usasagolausa.com/images/brochure_carroceria_eng_2013_b.pdf · sagola in their...
Post on 27-Mar-2018
218 Views
Preview:
TRANSCRIPT
Xtreme
Same body, different aircapsNew High-end Aluminium Aircaps for MS, HS, Waterborne and HVLP.
Revolutionary air distribution system Carried out at the tip of the air cap, it creates a finer and softer spray.
Perfect mechanization without joints No gaskets between air and paint.
New spray fan regulator designWith connection in stainless steel. With less turns and greater precision.
Numbered product regulatorNew guide box in stainless steel.
One single piece Automatic paint packing gland
Made of Inox Steel. Unique in the market.
No gasket in the air chamber
PROGRAM 1 BODYSHOP. TOP FINISHING
2
Digital precision. Integral digital pressure gauge in the body. Perfect waterborne paint uniformity. Economy in paint consumption. Easy and smooth handling. Maximum robustness and minimum maintenance. Total waterproof protection. ATEX Regulations. New design of the air flow regulator.
PROGRAM 1 BODYSHOP. TOP FINISHING
3
XtremeDigital
1014180310141805101418091014183110141802101418081014180410141810
Code1.30 [LXT CLEAR]
1.30XL [LXT CLEAR]1.40 [LXT CLEAR]1.20 [LXT AQUA]1.30 [LXT AQUA]1.40 [LXT AQUA]1.30 [LXT HVLP]1.40 [LXT HVLP]
Version
1014181310141815101418191014183210141812101418181014181410141820
Code1.30 [LXT CLEAR]
1.30XL [LXT CLEAR]1.40 [LXT CLEAR]1.20 [LXT AQUA]1.30 [LXT AQUA]1.40 [LXT AQUA]1.30 [LXT HVLP]1.40 [LXT HVLP]
Version
Manual tightening. Unique in the market. No need of key to assemble-disassemble.10 bar Quality Pressure Gauge. Avoids damages by overpressure.Ultra-fine paint particle size and bigger spray patterns. With aerodynamic mechanizations at the lugs.
Compact, robustness and light. New design of the regulators. Forms and operating smooth. Air Flow Regulator made of aluminium and incorporated in the handle.New design of the handle. Ergonomic and confortable trigger. New design, reduces fatigue.
Xtreme
Xtreme
with pressure gauge
internal regulator
Aqua Plastic
Compact 220
Couplings
Cleaning kit
Lubricant grease
Air Flow Regulation with Pressure Gauge
Waterborne MetallicsSilvers Pearl coating
Maximum transfer 65-75%
Top technological expression in bodywork finishing spray guns
Lacquers ClearcoatsSingle stage paints MS and HS
Code 40000177
Code 40000199
Code 55711607
Code 40000086
Code 56418589
Code 56418020
Code 55711612
1014182310141825101418291014183310141822101418281014182410141830
Code1.30 [LXT CLEAR]
1.30XL [LXT CLEAR]1.40 [LXT CLEAR]1.20 [LXT AQUA]1.30 [LXT AQUA]1.40 [LXT AQUA]1.30 [LXT HVLP]1.40 [LXT HVLP]
Version
Xtreme Xtreme XtremeLXT CLEAR LXT AQUA LXT HVLP
1.30 1.20
Clearcoats,HS
<18”
2-2.2 bar 2-2.5 bar 2-2.5 bar 1.8-2.0 bar 1.8-2.0 bar 1.8-2.0 bar 2.0 bar 2.0 bar
Waterborne paints,
High precision
SpecialClearcoats,
HS
Special for waterborne
paints
Water and solvent based
basecoats
Clearcoats andHS single stage,
High speed,>20”
Waterborne paints,
High speed
Water and solvent based basecoats,Clearcoats andSingle stage
1.30XL 1.30 1.301.40 1.40 1.40VersionApplication
RecommendedPressure
Designed to clean spray guns and accessories when working with waterborne products. Allows the easy cleaning of the dirty water, facilitating mixture with the flocculant by means of a pneumatic system, effectuating in this way the complete separation of paint and pigment residues. Provided with cleaning systems using pressurised water both for interior and exterior cleaning of the gun and accessories Minimum maintenance.
Compact machine of small size, ideal for small paint shops. Designed to automatically clean spray guns when working with solvent-based paints and clearcoats. Pump absorption filter. Manufactured in stainless steel. Robust and easy to use. Minimum maintenance.
Adaptors for 3M PPS disposable deposits for spray guns 4500 Xtreme and 4100 GTO.
Complete cleaning set, including one brush for the outside cleaning, and rods of different sizes for all the inner paths of the spray gun. Supplied in a practical show case.
Same grease used by SAGOLA in their factory over the last half century. Effectiveness backed up by 55 years of manufacturing and assembling of spray guns and painting equipments. It helps to prevent a premature wear of moving parts, offering at the same time a smooth and precise performance during the gun life.
Manual Tightening. Ideal to work with high transfer spray guns HVLP and EPA. Pressure scale red-green as the regulation demands. Made of aluminium. Very light.
Adaptors for 3M PPS disposable deposits for spray guns 4100, 3300 Pro and Mini Xtreme.
PROGRAM 1 RETOUCH FINISHES
PROGRAM 1 FILLERS
4
Always using the most suitable tool for every job:- Special spray gun for retouching paint jobs with waterborne paints. - Colour and clear application.- Light, ergonomic and sturdy.- Full adaptation to the painter’s hand.- High quality materials, reliable.- Adapted to the latest technologies: the best drying times and the best finish. - It reduces mist, saves paint and perfectly defines the work zone.- Ideal for blending, retouching and for very accurate tasks.
New body. Maximum ergonomics. High Quality. Versatile, light.3 types of heads: HVLP, EPA and EVO.Minimum maintenance. No gaskets between air and paint.High-end aluminium aircaps. High quality chromed-plating.Time and paint consumption saving.Complying with the strictest standards on solvent emissions.HVLP Gravity HVLP system, transfer >72%Minimum mist and maximum performance in the application of fillers and primers.EPA For the application of fillers, primers and finishes with optimum performance and atomisation. Minimum air consumption. Able to work with small compressors (2 HP min.)EVO Maximum quality and speed in the application of finishes and wet-on-wet processes. High atomisation quality with low air consumption.
Finishes with the highest quality and precision
New Advantages for filler application
0.80 [miniAQUA]1.00 [miniAQUA]1.20 [miniAQUA]
Version101118011011180210111803
Code
0.50 [05]0.80 [05]1.00 [10]0.50 [R5]
Version20140801201408022014080320140804
Code
1.00 [miniHVLP]1.20 [miniHVLP]
Version1011180910111810
Code
PRO1.30 [3300 EVO]1.40 [3300 EVO]1.60 [3300 EVO]1.40 [3300 EPA]1.60 [3300 EPA]1.80 [3300 EPA]
1.40 [3300 HVLP]1.60 [3300 HVLP]1.80 [3300 HVLP]
Version101415421014154110141543101415331014153410141535101415301014153110141532
Code
SUPPLIED IN A BOX
Premium 150 Suction
Junior 140
Premium 475
Briefcases
Code 25410101
Code 25410104
Double effect professional airbrush with a full accessory kit. Feathering, high precision design, graphic art,...maximum spray quality and equipment.
Double effect airbrush for taking your first steps in the world of feathering and bodyshop design. Complete accessory kit included.Air hose and compressor adaptor included.
Gravity Spray gun that due to its reduced dimension becomes ideal for shadings, little retouches and/or painting of small parts. Very high quality of spray. It includes a 125 c.c. high quality deposit and paint filter.
Option 1- 1 u. 4500 Xtreme with internal regulator- 1 u. 3300 Pro gravity
Option 2- 1 u. 4500 Xtreme with internal regulator HVLP or AQUA- 1 u. 4500 Xtreme with internal regulator LXT01 or CLEAR
Option 3- 1 u. 4500 Xtreme digital HVLP or AQUA- 1 u. 4500 Xtreme with internal regulator LXT01 or CLEAR- 1 u. Mini Xtreme
PROGRAM 1 FILTERING AND DRYING SYSTEMS
5
Particleremoval kitClassic S1
VenturiClassic S1ExtensionClassic S1
Drying gun
Purifying Filter with Regulator
Purifying Filter with Regulator
Purifying Filter with Regulator
Purifying Filter with Regulator
Venturi classicStand
Breathingmask
HoseSpool
Anti-static compressed air hose
Code 40000249
Code 20340605Code 20340604Code 20340601
Code 10340401
Code 10730305
Code 10730202
Code 10730304
Code 10730204
Code 40000243
Code 14810301
Code 40000268 (SA110)Code 40000269 (SA115)
Code 56414024 (6m. 8x15mm. H/H 1/4)Code 56414025 (11m. 8x15mm. H/H 1/4)Code 56414027 (16m. 8x15mm. H/H 1/4)
It includes 6 needles to remove any particle in the paintwork.Multiplied X4 airflow.
Robust and light. Nozzle with blowing system “Venturi”.
Blowgun made of aluminium.Robust and light.Metal nozzle.
Blowgun made of aluminium.Robust and light.Metal nozzle.
For waterborne products.Reduces drying time.Includes venturi regulator to adapt drying technique to the coated surface, retouched area or entire part. Can be fully dismantled to facilitate cleaning and proper maintenance (avoiding pollution).Reduced drying time. Greater volume of air output favouring the rapid evaporation of water.
Air Purifying Filter with pressure regulator and pressure gauge.The triple filtering system holds water and impurities. It includes a 8 micron wide surface sintered bronze filter. Automatic draining system and assisted regulator wheel. Double outlet to use two tools simultaneously.
Air Purifying Filter with pressure regulatorand pressure gauge. Its new cup is more resistant and more protective. Semi-automatic draining system.Minimum pressure loss.
Easy to use, light and versatile.Multiple adaptability.Ideal to accelerate the drying of water-based paints parts inside the cabin.
Paint chemical filters against organic fumes.Excellent waterproof and comfort system.Natural rubber body.Practical upper fixing.
Hose PU (Polyurethane) twisted with connection 1/4” M. Metal housing. SA110: 10m. / SA115: 15m. Hose diameter: 8 x 12mm.
Light and strong air hoses. Security trigger mechanism which stands up to high booth temperatures. 1/4” Flare fitting.
SA110/SA115
Bodyshop hose
FlowSUPER
Maximum filtration level. Purifying filter with regulator and coalescent filter (0,01 micron) + wide surface active charcoal. It offers the maximum filtration level in the paint lines and booths where the finish is highly demanding.
Purifying Filter with Regulator and coalescent filter (0,01 micron). Double filtering with an optimum flow and pressure regulation, holding water and impurities, attaining an air purity of 99%.
serieS
ANTI-STATIC
PROGRAM 2 BODYSHOP. FINISHES
6
New fan regulator designModern design without sharp edges, it makes cleaning easier. With connection in stainless steel. With less travel and greater precision. Suitable for right and left-handed operators. Single shaft system Minimum spare parts and maintenance reduction.
New paint inletMade of stainless steel. It allows using mini paint filter and the Xtreme model deposit.
Internal aluminium air flow regulatorAir distributor incorporated.
Single piece automatic paintpacking glandUnique in the market. It avoids manipulation and breakage of the glands and makes easier to remove it for a thorough cleaning of the paint part.New aircaps GTO TECH/ GTO HVLPUltra-fine droplet size and larger fans.
4100
PROGRAM 2 BODYSHOP. FINISHES
7
4100
Air flow regulatorCode 40000335Small and light.Air flow regulation with pressure gauge. Exact inlet pressure to the spray gun. High quality pressure gauge with green scale for high transfer spray guns.
New design. Light and sturdy. High strength chromed body.
High performance and atomization. Ease of use.
Valid to High Solid clears and waterborne.
SAGOLA presents its best price/quality ratio in bodywork finishing spray guns.
A new body with ergonomic design creates an enviable balance and ease of use with a reduced weight.
With this model SAGOLA offers the widest range of solutions for all the refinishing sector needs. The New spraygun is launched with the highest SAGOLA manufacturing standards, competitive prices whilst maintaining a superb service and offering the best warranty.
The new High transfer aircaps GTO TECH and GTO HVLP, with the strict compliance with the most demanding regulations concerming solvent emissions, with GTO TECH and GTO HVLP systems.
GTO TECH GTO HVLP1.20 1.20
Clearcoats,basecoats
1.8-2.2 bar 2-2.2 bar 2-2.5 bar 2.0 bar 2.0 bar 2.0 bar
Waterborne paints,
Maximum saving
Clearcoats,HS, MS
Special water and
solvent basecoats
Clearcoats andsingle stage
HS, MSHigh speed.
Basecoats, clearcoats and single stage
1.30 1.40 1.30 1.40VersionApplication
RecommendedPressure
101419011014190210141903101419041014190510141906
Code1.20 [GTO TECH]1.30 [GTO TECH]1.40 [GTO TECH]1.20 [GTO HVLP]1.30 [GTO HVLP]1.40 [GTO HVLP]
Version
290 L/min.
178 g/min.
290-300 mm.
18 - 20 cm.
290 L/min.
178 g/min.
290-300 mm.
18 - 20 cm.
GTO TECH
GTO HVLP
Perfect spraying65% paint transferHigh speedUltra fine atomisation
Low paint consumption75% maximum transferLowest oversprayPerfect color matching withsolvent and waterbornemetallic paint
Air consumption
Paint flow
Fan size
Painting distance
Air consumption
Paint flow
Fan size
Painting distance
PROGRAM 2 BODYSHOP. PRIMERS
8
Solventwasher
New bodyNew aircaps
Light and versatile
Low air consumption Maximum toughness and reliability
Code 40000495
Compact machine of small size, ideal for workshops with little room. Designed to the automatic cleaning of spray guns and painting accessories when working with solvent-based paints and clearcoats. It works with a membrane pump and incorporates a pneumatic system in order to prevent solvent to get into the air area of the gun. Pump absorption filter. Robust and easy to use. Minimum maintenance.
High transfer gravity spray gun. Very low air consumption.Robust, light and with new ergonomic design.To work with 1.5 HP compressors.Product and fan regulators.Supplied in a box or blister.
Air consumption: 150 L/min.Weight: 480 g.Deposit capacity: 600 ml.
Low air consumption. Conventional painting system.Fan, paint and air flow regulators.Anti-drip system deposit.SS, clears and primers.Air consumption: 240 L/min. to 3,5 barWeight: 720 g.Deposit capacity: 650 ml.
New body. Maximum ergonomics. Single shaft design, fewer parts. Aluminium regulators. Easy to work with gloves.Conventional or HVLP system.High speed.Easy and fast application.
Air consumption: [21] 210 L/min.[25] 240 L/min.
[36] [28] 320 L/min.[HVLP] 370 L/min.
Weight with dep.: 610 g.
lpmG
1.40 [box]1.60 [box]1.80 [box]
1.80 [blister]
Version20141904201419032014190220141905
Code
1.60 [40]1.80 [40]2.50 [42]
Version201414012014140220141403
Code1.60 [21]1.80 [21]2.00 [25]2.50 [36]2.80 [28]
1.40 [HVLP]1.60 [HVLP]1.80 [HVLP]
Version1014160610141602101416041014160310141605101416081014160910141610
Code
LUXpro
Robustness and economical
The best price with maximumquality
PROGRAM 2 FILTERING AND DRYING
9
Purifying Filter with Regulator
Purifying Filter with Regulator
Code 10730502 Code 10750402
Code 40000297
Filter - Regulator + Lubricator.Accurate control of the oil supply thanks to its manual drop-by-drop regulator. No pressure loss due to the “in-line” design. Maximum reliability and productivity in the minimum space.
Filter and Regulator.High air flow. High quality pressure gauge. Highly reliable regulation system. Adjustable to any hose size. Simple and smooth regulation.
Air flow micro-regulator. High pressure regulator. Small, sturdy, reliable and durable. Diaphragm regulation system from 0 to 10 bars. High quality 10 bar manometer.
Lubricator.Safe functioning from 3 L/min. Minimum flow restriction.All inlet and outlet sizes available. Oil level checking window. “Drop-by-drop” manual regulation system.
Air purifying filter.High flow filter for its insertion in air lines. Transparent liquid residue check window. Semi-automatic drain.Adaptable to any installation.
Effective solution for compressed air filtration in professional paint booths for: car refinish, wood, machinery, plastics and industry in general.Highly reliable air regulation system. Manufactured from a solid aluminum block. It eliminates air, oil and particles. Friction and centrifugal filtration. Automatic drain of condensed liquids. High air flow. High quality manometer.
Two stage air filter. Maximum filtering level. Recommended for last generation finishes. Waterborne paints, HS clearcoats and SS, high gloss lacquers. Highly reliable air regulation system. Manufactured from a solid aluminum block. 1st stage: water, oil and particles filtering + 2nd stage: submicronic filtering. 0.01 microns Automatic drain of condensed liquids.High air flow.High quality manometer.
1/2”3/8”1/4”
Version107503011075030210750303
Code1/2”3/8”1/4”
Version107304011073040210730403
Code
1/2”3/8”1/4”
Version107405011074050210740503
Code1/2”3/8”1/4”
Version107103011071030210710303
Code1/2”3/8”1/4”
Version107204011072040210720403
Code
BSPP 1/4”BSPP 3/8”BSPP 1/2”
Version110105201101052111010522
Code
BSPT 1/4”BSPT 3/8”BSPT 1/2”
Version110204201102042111020422
Code
BSPP 1/4”BSPP 3/8”BSPP 1/2”
Version110104201101042111010422
Code
BSPP 1/4”BSPP 3/8”BSPP 1/2”
Version110205201102052111020522
Code
Espiga 8mm.Espiga 10mm.
Version1101062111010622
Code
8mm. barb.10mm. barb.
Version1102062111020622
Code
Plugs
Venturi classic
Connectors
The size 2 plug is the most commonly used push plug in paint and body shops, and also in industry for the connection of all kinds of pneumatic tools. Silicon free. All springs, valves and pins made of stainless steel. All SAGOLA connectors are manufactured in high carbon steel making them extremely strong and stress resistant.
Special drying gun for waterborne products.
Made of high-carbon steel. Anti-corrosive nickel etched finish. Fully compatible with earlier lines of SAGOLA plugs.
PLUS PLUS
Coalescent
Filter
plus
serieS
INDUSTRIAL BODYSHOP
10
Code 10540799
Code 30932099 Code 30951599
Code 30920599
6110 INOXComplete equipment
Complete equipment Complete equipment
A new and bright chromed finishLightweight and very ergonomic spray gun
Greater product transfer
Complete equipment
Deposit capacity is 10 liters. Top product output, double regulation and hand mixer. Maximum working pressure: 4 bar.Ideal for industrial bodyshop and and Nautical Industry.
High pressure Airless equipment.
Includes hose and PSAM 104 spraygun, Airless pneumatic pump. deal for high production and waterborne clearcoats. Enamels, varnishes, basecoats and primers.
High pressure Mix equipment.
Includes hose and Xtreme Mix spray gun, mix pneumatic pump,medium production. Valid for water based paint applications. Pressure ratio 16:1.
Ideal for painting large areas, machinery and industrial vehicles. Continuous work sessions.Extra deposit capacity and application speed.Suction system of our 4100 allows painting at right angles with the piece when painting bonnets, roofs, vehicles’ interiors, trucks’ chassis, trailers…
General finishes. (nozzle 1.4)Maximum quality finishes. (nozzle 1.6)Special high speed, primers. (nozzle 1.8)
Wide range of applications.High profitability in continuous painting.It offers high paint transfer without increasing air consumption or any special application requirements. Ideal for the application of high speed finishing.
Maximum speed finishing. (nozzle 1.20).Primers. basecoats (nozzle 1.40).Glues, adhesives (nozzle 1.80).
30 L. Double diaphragm pump.Medium production.For finishes and primers.High precision product regulator.Anti-pulsation system and double paint filter.Lacquers, clearcoats, basecoat, enamels. Medium viscosity products.
Complete equipment includes 6110 Inox, 4100 Xtreme Pressure 1.20 [XT01 B] and 6 m. air and product hoses.
See more combinations.
See more combinations.
Complete equipment includes DM 1/300 (trolley and Absorption), 4100 Xtreme Pressure 1.20 [XT01 B] and 6 m. air and product hoses.
Complete equipment includes Mack 320 (trolley and Absorption), PSAM 104, rotating tip, rotating head and 10 m. product hoses (security).
Complete equipment includes Raider 160 (trolley and Absorption), Xtreme Mix and 5 m. air and product hoses.
4100
4100
1.40 [96]1.60 [96]1.80 [96]
Version101206011012060210120603
Code
1.20 [765]1.40 [765]1.80 [20A]
Version101521021015210310152106
Code
Xtreme
Xtreme
Xtreme
SUCTION
Xtreme
PRESSURE
VERSION
VERSION
SANDING AND SEALING, VARIOUS APPLICATIONS
11
Code 10330201
Code 10330301Code 20330502 Code 20330401
Code 40000246
Code 40000250
Code 10310201 Code 40000490
3900 Plus Sealant
518 ProClassic 414 416
MagneticStands SP2
Scissor Rack
Classic I PlusInflating gun AT30 Sprayer
Sealant pneumatic gun.Fluid outlet speed regulation. Dosified and uniform bead. Instantaneous bead cut-off facility.
Pressurized pneumatic underseal cartridge pistol. Gun for application of standardised acoustic insulation. Total control over product flow.Atomisation quality and size spray.
Hand sandblasting gun for stippling or cleaning of parts and preparation.2 product caps.Consumption: approx. 280 L/min. Max. recommended working pressure 5 bar.
Pneumatic underseal cartridge pistol Gun for application of standardised acoustic insulation 1 L. cartridges. Adjustable nozzle for product amount and roughness.
Magnetic stand for 2 spray guns.Supports PPS type adapters.
Holder for parts under repair or painting.With sponge rollers to avoid damage to parts. Curved legs designed for use on grid floors. Manageable and light.
Professional inflating gun - pressure checker.Shock-protected pressure gauge.
A must have for degreasing tasks in the bodyshop.Strong, sturdy and practical.Capacity: 1L. Metal spraying tip with atomization regulation.
L
L
High performance sandersExtremely high finish quality“L” range sanders have been designed for workshops where high performance and top quality finishes are demanded.Designed for a more confortable operation, “L” range sanders are the reference in low vibration and high performance tools.The L505 is a pneumatic orbital sander with a 5 mm. oscillation designed for quick grinding down, with a good quality surface finish. The L252 is a pneumatic orbital sander with an oscillation of 2.5 mm. which ensures high quality finishes without leaving any kind of marks on the surface. The L252R is a pneumatic orbital sander which ensures precision sanding and top quality finishing. It is ergonomic and light, perfect for those small retouches.
L R
75 mm. ø Sand disk (velcro) L252R152 mm. ø Sand disk (6 holes, velcro) L252 / L505
152 mm. ø Sand disk (Multiholes, velcro) L252 / L505
Version490002204900022149000501
Code
L505L252L252R
Version400002324000023140000230
Code
We refuse any responsibility for misprints in the technical specifications or images shown in this brochure.
Find more details and products in our website
www.sagola.com
See ourlatest products
BODYSHOP Catalogue 2013
SAGOLA ESPAÑA . Urartea 6 . Apdo. 199 . 01010 . Vitoria - Gasteiz . SPAIN . Tel.: +34 945 214 150 . Fax: +34 945 214 147 . email: sagola@sagola.com
DEALER’S STAMP
BODYSHOP 2013
SING IN! OUR
NEWSLETTER
top related