x 5300 350 165 t specification sheet
Post on 29-Nov-2015
14 Views
Preview:
DESCRIPTION
TRANSCRIPT
X-SERIESX-SERIESX-SERIESsolar outdoor lighting systemssolar outdoor lighting systems
Solar Lighting International is the leading manufacturer of the world’s brightest solar light, the X-Series.
SLI’s WhiteLight™ technology sets new standards for illumination, security and night-time visibility.
X-5300-350-165-T HID MPPT Solar Lighting System
SOLAR ARRAY
Qty. 1- Top of Pole Solar mounting rack – series 5001 Series
Qty. 2- 165/170/175/180 series watt solar module (Sharp / Sunwize or equal)
Qty. 1 – 15 meter MC Cable to wire array to power center
POWER CENTER
Qty. 1- Aluminum enclosure, pre-wired with keyed lock on front panel
(All enclosures will have the same keyed lock)
Qty. 2- Knockouts with 2 liquid tight strain reliefs included
Qty.1- Solar charge controller, Maximum Power Point Tracking charge controller
Qty. 2- 30A breaker for safety
Qty. 1-Gel battery pack
Qty. 2- 2-24 inch galvanized threaded rod with 4 washers and 4 nuts to mount power
pack to pole
LUMINAIRE – TESTED AT FACTORY PRIOR TO SHIPMENT
Qty. 1- GE MR2C Full cut off Dark Sky compliant cobrahead
Qty. 1- SLI X-50 Ballast and igniter assembly
Qty. 1- X-Series HID 5300 Lumen Metal Halide type light Capsule/ Bulb
Qty. 15 Feet of sunlight resistant 10/2 wire
Pole and Arm sold separately.
Series 5001 Single Row 3-Inch Pole Topwith SolarMount® HD RailsInstallation Manual 524.3
Un
irac
Insta
llatio
n M
an
ua
l Se
ries
Unirac welcomes input concerning the accuracy and user-friendliness of this publication. Please write to publications@unirac.com.
Pub 090616-4iiJune 2009
© 2009 by Unirac, Inc. All rights reserved.
See www.unirac.com for your nearest Unirac distributor.
Un
irac
Insta
llatio
n M
an
ua
l
U.S. Des. Patent No. D496,249S. Other patents pending.
Stainless steel hardware can seize up, a process called galling. To sig nifi cant ly reduce its like li hood, (1) apply lubricant
to bolts, preferably an anti-seize lu bri cant, avail-able at auto parts stores, (2) shade hardware prior to installation, and (3) avoid spinning on nuts at high speed. See Installation Supplement 910, Galling and Its Prevention, at www.Unirac.com.
The installer is solely re spon si ble for:
• complying with all applicable building codes, including any that supercede these instruc-tions;
• pole installation appropriate to local wind and soil conditions;
• using only Unirac parts and installer-supplied parts as specifi ed by Unirac (substitution of parts will void the warranty);
• installing all electrical aspects of the PV array.
Parts List (Parts are illustrated in exploded views, pp. 2–4.).
Wrench Part Qty. size
SolarMount rail 2Cross pipe 1Pole clamp 2Pole cap 1
Hexhead bolt, 3⁄ 8˝ x 4˝ 4 5⁄8˝ Lock washer, 3⁄ 8˝ 4Saddle 2U-bolt, 3⁄ 8˝ 2Flange nut, 3⁄ 8˝ 4 5⁄8˝
Module mounting clip 4*Module bolt, 1⁄ 4˝ 4* 7⁄16˝ Flat washer, 1⁄ 4˝ 4*Flange nut, 1⁄ 4˝ 4* 7⁄16˝
*Per module to be mounted. Series 5001 racks include clips and hardware to mount 2 to 6 modules.
Thank you for purchasing a Unirac. Please review this manual com plete ly before proceeding.
This rack is intended for a 3-inch (80 mm) Schedule 40 steel pole, outside diameter 3.500 inches (88.9 mm).
Assembly order is not critical. Work from the pole out-ward or attach PV modules to rails before mounting the array to the pole.
The SunWize 170/175/180 module falls into the mid-range of price and efficiency and
is aimed at residential and commercial grid-tie applications. It is made of high efficiency
mono-crystalline silicon solar cells. Every cell is tested and electronically matched to
maximize output. The modules are manufactured according to the strict requirements of
international and US quality standards. 25-year limited warranty.
Features include:
Cells are laminated between sheets of ethyl vinyl acetate (EVA) for moisture free
protection, UV stability and electrical isolation
Tempered, high-transmittance glass is used for strength and high power output
The module is framed with a strong, corrosion-resistant clear anodized aluminum with
multiple mounting holes for ease of installation
Modules are equipped with multi-string by-pass diodes so that the modules will function
even if partially shaded
Highly resistant to hail, moisture, wind speed and other environmental factors
Junction box is equipped with + and – MC 3mm (36” male/female) cables
Wide operating range: from -45ºC to 95ºC with 100% relative humidity
US listed to UL-1703, cUL and IEC international standards
SunWize® SW170/175/180 Solar ModuleHigh performance for commercial and residential applications
RELIABLE PEOPLE ::: RELIABLE PRODUCTS ::: RELIABLE POWER
Model Rated Power Rated Voltage Rated Current Open Circuit Short Circuit (Watts) (Vmp) (Imp) Voltage (Voc) Current (Isc)
SW170 170 36.25V 4.69A 43.9V 5.15A
SW175 175 36.50V 4.80A 43.9V 5.20A
SW180 180 36.60V 4.92A 44.0V 5.30A
Standard Test Conditions: 1000 W/m2, 25ºC, AM 1.5
SW170/175/180 Solar Module©
SW170/175/180
Dimension inches mm
A 62.20 1580
B 31.81 808
C1 1.65 42
C2 0.53 13
D 31.49 800
E 30.15 766
F .27Ø 7Ø
G 1.25 32
Weight 37.5 lbs. 17 kg. (approx.)
WarrantyThe SunWize SW170 /175/180 module carries a 25-year limited warranty on power output.
CertificationsAll SW modules are UL-1703 and cUL listed and ISPRA certified to international standards.
Electrical Performance
Voltage (V)
Curr
ent (
A)
Electrical / Thermal Parameters
Cell Type Moncrystalline Silicon
Circuit Interconnection 72 – 125 x 125 mm cells, connected in series
Max System Voltage 600Vdc
Series Fuse Rating 12 Amps
NOCT 49ºC
Voltage Temperature coefficient (Voc) -0.34%/ºC
Current Temperature coefficient (Isc) 0.09%/ºC
Power Temperature coefficient (Pmax) -0.37%/ºC
R-8/2001
M-2
50 R
OA
DW
AY L
IGH
TIN
G
GE Lighting Systems, Inc.www.gelightingsystems.com
® Registered Trademark of General Electric Company™ Trademark of General Electric Company
Data subject to change without notice
ORDERING NUMBER LOGIC
PRODUCTIDENTXXXX
LIGHTSOURCEX
VOLTAGE
X
BALLASTTYPEX
IES DISTRIBUTIONTYPEXXX
LENS TYPE (PRISMATIC)REFRACTORX
OPTIONS
XXXM2RC =M-250R2 withCutoff Optics
S = HPSC = MercStandard:Lamp notincluded.
60Hz0 = 120/208/
240/277Multivolt
1 = 1202 = 2083 = 2404 = 2775 = 4807 = 120X2408 = 240V
Ballast 120V PEReceptacle notreconnectable
D = 347F = 120X347T = 220W = 230
50Hz6 = 220R = 230Y = 240
NOTE: Dualvoltage connectedfor lower voltage
See Ballast Selection TableA = AutoregC = Merc-RegG = Mag-Reg with
Grounded Socket ShellH = HPF Reactor or LagM = Mag-RegN = NPF Reactor or LagP = CWI with Grounded
Socket Shell
See PhotometricSelection Table
S = ShortM = Medium
C = Cutoff
2 = Type II3 = Type III
See PhotometricSelection TableA = Acrylic Clear
GlobeG = GlassL = Polycarbonate
Clear Globe
NOTE:150 watt Maximumwith Acrylic orPolycarbonateRefractors.
C = Charcoal filterF = Fusing (Not
available withmultivolt or dualvoltage)
J = Line SurgeProtector,Expulsion Type
WATTAGE
XX05 = 5007 = 7010 = 10015 = 150
(55V)17 = 17520 = 20021 = 100/150
(55V)25 = 250
NOTE: Dualwattageconnectedfor lowerwattage
2
PE FUNCTION
X1 = None2 = PE Receptacle
NOTE:Receptacle connectedsame voltage as unitexcept as noted. OrderPE Control separately.
M-250R2 LUMINAIREWITH CUTOFF OPTICS
APPLICATIONS• For residential streets, access roads, parking lots and other outdoor areas
• Universal two-bolt slipfitter• Die-cast aluminum housing with
electrocoat gray paint finish• Adjustable mogul base socket
(street side) – E39 standard• ALGLAS® finish on reflector• No-tool PE receptacle• Plug-in ignitor• True 90° cutoff—no light
above 90° (meets RP8-2000 forfull cutoff)
• External stainless steel baillatch
• CSA Certified unit available,contact factory
• Standard construction is IP55• Plastic Pest guard standard (not
required for 2 in. pipe)
SPECIFICATION FEATURES
All light sources are clear unless otherwise indicated.
PHOTOMETRIC SELECTION TABLE
Light LensWattage Source Type MC2* MC3* SC2*50,70,100,150 (55 V) HPS A or L N/A 9168 (1A) N/A50,70,100,150 (55 V) HPS G 7293(2CL) 7292(1CL) N/A200, 250 HPS G 7306 (2DH) 7305 (1DH) N/A100, 175, 250 Merc G N/A N/A 7300(1B)NOTE: N/A=Not Available
*Meets RP8-2000 for full cutoff
IES Distribution TypePhotometric Curve Number 35-17 ----(Soc Pos)
M2RC 15 S 1 N 2 G MC3 F
2001/R-9
M-250 RO
AD
WAY LIG
HTIN
G
GE Lighting Systems, Inc.www.gelightingsystems.com
® Registered Trademark of General Electric Company™ Trademark of General Electric Company
Data subject to change without notice
REFERENCESSee Page R-38 for start of Accessories.See Page R-42 for Explanation of Options and Other Terms Used.See Pole and Bracket Section Page P-2 for pole selection.
DATAApproximate Net Weight 20-30 lbs 9-14 kgsEffective Projected Area
Flat Glass Unit 0.6 sq. ft. max 0.06 sq. M maxClear Acrylic orPolycarbonate Globe Unit 1.0 sq. ft. max 0.09 sq. M max
Suggested Mounting Height 20-40 ft. 6-12 M
M-250R2 LUMINAIREWITH CUTOFF OPTICS
FIXTURE DIMENSIONS
Light Multi- 347, 240/120Wattage Source volt 120 208 240 277 480 120X240 120X347 PE R 220 230 220 230 24050 HPS H,N H,N H,N H,N H,N H,N H,N H,N H,N N/A N/A N/A N/A N/A70,100,150 (55V) HPS A,H,N A,G,H,M,N,P A,G,H,M,N A,G,H,M,N,P A,G,H,M,N G,M G,H,M,N,P G*,H,M*,N G,H,M,N H,M,N N/A H,M,N H N/A100/150 (55V) HPS N/A H,N N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A200, 250 HPS A,P A,H,N,P A,H,N,P A,H,N,P A,P A,P A,P A**,P A,H,N H H A,H,N H H100, 175 Merc C C,N C C,H,N C C C N/A C,H,N N/A N/A N/A N/A N/A250 Merc C A,C,N C C,H,N C C C N/A C,H,N N/A N/A H N/A H
NOTE: N/A = Not AvailableNOTE: *Not available in 120X347 voltNOTE: **Not available in 200 watt
Ballast Type/Voltage60Hz 50Hz
BALLAST SELECTION TABLE
M2AC — SUGGESTED CATALOG ORDERING NUMBERS
Catalog Number Wattage Light Source Voltage Ballast Refractor Photometric(60 Hz) Type Type Distribution
M2RC07S1N2GMC3 070 HPS 120 NPF Reactor Glass MC3M2RC10S1N2GMC3 100 HPS 120 NPF Reactor Glass MC3M2RC15S0A2GMC3 150 HPS 120 NPF Reactor Glass MC3
All GE suggested catalog ordering numbers come with PE receptacle. PE control must be orderedseparately. Order and install SCCL-PECTL if no PE is desired.Multivolt ballasts can be for either 120, 208, 240, or 277 volt incoming power supply.
top related