workshops / seminars / fdps organised letter 2015-16 issue 2.pdf · sri dr. j. m. mallikharjuna,...
Post on 23-May-2018
222 Views
Preview:
TRANSCRIPT
WORKSHOPS / SEMINARS / FDPs ORGANISED
A Two Day Work Shop on “ANSYS Structural Applications”
Department of mechanical
engineering organized a two day
Work Shop on “ANSYS Structural
Applications” sponsored by
Siddhartha Academy of General &
Technical Education, Vijayawada,
during 18th - 19th February 2016.
Sri S.Venkateswara Reddy, Engineer-
Structural, Innovent Engineering
Solutions Pvt, Ltd, Bangalore ,
Karnataka graced the function as Chief Guest. Speaking on the occasion, he highlighted the
basic principles and importance of Finite Element Analysis. The ANSYS structural analysis software
suite enables you to solve complex structural engineering problems and make better, faster design
decisions. With finite element analysis (FEA) tools, you can customize and automate your
simulations, and parameterize them to analyze multiple design scenarios.
Delegates from educational institution, industries and research organizations participated in large
number. The workshop was organized by Sri C. Mahesh, Assistant Professor, Department of
Mechanical Engineering, V.R. Siddhartha Engineering College, Vijayawada.
A Two Day Regional Workshop on “Computational Fluid Dynamics”
Department of mechanical
engineering organized a two day
Regional Workshop on
“Computational Fluid Dynamics”
sponsored by Siddhartha Academy of
General & Technical Education,
Vijayawada, during 3rd–4rd March
2016.
2 19
AFOSEC 2016
Department of Mechanical Engineering organized different events like Paper Presentation, Poster
Presentation, Technical Quiz, 2D-Drafting (AutoCAD), Screw it, Junkyard wars, Robo-race, Robo-
buzz(soccer), Robo-war, Thrust Rocket, JAM (Just a Minute) and Mousetrap racer at Annual Fest
of Siddhartha Engineering College – 2016 (AFOSEC-2016). Students of various engineering
colleges participated in large number.
Robo War
Model Exhibition
Paper Presentation
Composite specimens Exhibition
Robo Race
Poster Presentation
Junkyard Wars
Certificate distribution to the participants
Sri Jaswanth Ravulu, Application Engineer CFD, Innovent Simulating Ideas, Bangalore, Karnataka
graced the function as Chief Guest. Speaking on the occasion, he highlighted the basic principles
and importance of Computational fluid dynamics (CFD). Computational fluid dynamics (CFD) is a
branch of fluid mechanics that uses numerical analysis and algorithms to solve and analyze
problems that involve fluid flows. Computers are used to perform the calculations required to simulate
the interaction of liquids and gases with surfaces defined by boundary conditions.
The workshop was organized by Sri K. Ramanaiah, Assistant Professor, Department of Mechanical
Engineering, V.R. Siddhartha Engineering College, Vijayawada.
A Two Day National Seminar on “Recent Advances in IC Engines”
Department of mechanical
engineering organized a Two day
National Seminar on “Recent
Advances in IC Engines” under
TEQUIP – II, S. C. 1.2 during 31st –
1st April 2016.
This seminar highlights the important
need for more efficient and
environmentally sound combustion
technologies that utilize renewable
fuels to be continuously developed and adopted.
Mr.Ansul Agarwal, Deputy Manager, Mahindra & Mahindra Ltd. Chennai, graced the function as
Chief Guest. Speaking on the occasion, he highlighted the basic principles and importance of IC
Engines.
Mr.Prashant Sharma Deputy Manager, Mahindra & Mahindra Ltd. Chennai graced the function
and speaking on the occasion, he discussed the challenges faced in IC Engines.
Sri Dr. J. M. Mallikharjuna, Professor, IIT Chennai graced the function and discussed about research
scopes in the area of IC Engines and latest trends in IC Engines.
Faculty and students participated in large number. The Seminar was organized by Sri. K. Srinivas
and Sri M. Ashok Chakravarthy, Assistant Professor, Department of Mechanical Engineering, V.R.
Siddhartha Engineering College, Vijayawada.
318
YARRAGUNTA SAI KRISHNA 128W1A03B9 TECH MAHINDRA 37
K.SRAVANI 128W1A03E0 TECH MAHINDRA 38
KALAPALA VINAY MANOHAR 128W1A03E1 TECH MAHINDRA 39
SRINIVASARAO.MUDIGE 138W5A0323 TECH MAHINDRA 40
K.VISWA SRI SUBHANJALI 128W1A03E7 COLLABERA TECHNOLOGIES 41
SADHU ANUDEEP 128W1A03G8 COLLABERA TECHNOLOGIES 42
YADLAPALLI SANDYA 128W1A03H7 COLLABERA TECHNOLOGIES 43
Mani Deepika Tummalapalli 128W1A03B3 CAP GEMINI 44
Annepu Hemanth Kumar 128W1A0362 TCS (Off campus) 45
K.Mouli 128W1A03F0 TCS (Off campus) 46
Nakka Lakshmi Manogna 128W1A03F9 TCS (Off campus) 47
Ramadugula Manikanta Sesharao
128W1A03G6 TCS (Off campus)
48
Ketha Venkata Vamsi Krishna 138W5A0315 TCS (Off campus) 49
G.Srinivasareddy 128W1A0312 SENTINI BIOPRODUCTS 50
P.Kondareddy 128W1A03G3 SENTINI BIOPRODUCTS 51
Kodali Krishna Chaitanya 138W5A0316 SENTINI BIOPRODUCTS 52
L.Vijay Teja 138W5A0318 SENTINI BIOPRODUCTS 53
Ramakrishna Saladi 138W5A0330 SENTINI BIOPRODUCTS 54
Ventrapragada Nagavenkatasubrahmanyam
138W5A0336 SENTINI BIOPRODUCTS
55
Keerthi Javvadi 128W1A0316 FACE 56
Y SANDHYA (2ND JOB) 128W1A03H7 BOSCH 57
4
PUBLICATIONS
International Journals:
1 M.Suma Latha, V.V.S.Kesava Rao, J.N.Mallewara Rao, “Evaluation of productivity of the
components manufactured on CNC Lathe and Conventional Lathe”, International Journal
of Recent Trends in engineering &Research, Volume 2, issue 06, June 2016, pp. 322-
325, ISSN :2455-1457.
2 V.Sridhar, M.Ashok Chakravarthy, V.V.Venu Madhav, “Evaluation of Optimal Parameters
for Machining with wire cut EDM Using Grey-Taguchi Method”, International Journal of
Research in Mechanical Engineering & Technology, Volume 6, issue 2, May-Oct 2016,
pp. 86-90, ISSN: 249-5770.
3 K.Uday Kiran, K.Naga Malleswara rao, “Exergy analysis on braysson cycle with real gases”,
International journal of engineering research-online, Volume 4, Issue 3, May-June 2016,
pp. 75-80, ISSN :2321- 7758.
4 J.N.Malleswara rao, M.Suma Latha, V.V.S.Kesava rao, V.Anurupa, G.Srivalli, “Variation
of surface roughness with feed Rate on mild steel components produced by CNC Lathe”,
International journal of engineering technology, Volume 3, Issue 05, May 2016, ISSN:2395-
0072.
5 G.Jamuna Rani, Y.V.Hanumantha Rao, B.Balakrishna, “Experimental Analysis on Emissions
and Back pressure of a Diesel Engine Using Catalytic Convertor with Air-box”, International
journal of engineering technology, Volume 3, Issue 05, May 2016, ISSN:2395-0072.
6 T.Harikrishna, N.Vijaya Sai, “ Modelling the performance Enablers of public sector banks
using Cfa and Conjoint Analysis”, International Journal Of Engineering And Computer
Science, Volume 5, Issue 5, May 2016, pp. 16407-16413, ISSN: 2319-7242.
7 K.Siva Prasad, M.Likhitha Krishna, P.Priyanka, “Machining Analysis on Mild Steel”,
International Journal of Current Engineering And Scientific Research (IJCESR), Volume
3, Issue 6, 2016, pp. 89-95, ISSN:2393-8374.
8 K.Siva Prasad, G.Chaitanya, “The research review on abrasive Machining”, International
Journal on Recent Technologies in Mecanical and Electrical Engineering (IJRMEE), Volume
3, Issue 6, June 2016, pp. 20-28, ISSN: 2349-7947.
17
VAMSI KRISHNA THUMATI 128W1A0356 TCS 10
DOPPALA ADARSH 128W1A0372 TCS 11
KORE.SREE PRANEETH 128W1A0387 TCS 12
NARASINGOLU.S.LASYA PRIYA
128W1A0393 TCS 13
PAVANI NUKALA 128W1A0396 TCS 14
CHAITANYA PONNANA 128W1A0397 TCS 15
SAI RACHANA ILLA 128W1A03A0 TCS 16
SHAIK KAREEM 128W1A03A2 TCS 17
SHANMUKA.V.S.M.AKHIL P 128W1A03A4 TCS 18
ABHIRAM SURAVAJJULA 128W1A03A7 TCS 19
TADEPALLI SAI KRISHNA 128W1A03A9 TCS 20
CHANDANKUMAR PRIYA 128W1A03C8 TCS 21
PRASHANTH CHAVA 128W1A03D0 TCS 22
RAVYA DANDAMUDI 128W1A03D4 TCS 23
EDE RAMAVAMSI 128W1A03D5 TCS 24
MALLADI.LIKHITHA.KRISHNA 128W1A03F6 TCS 25
NANDAMURI MANOJ KUMAR 128W1A03G0 TCS 26
RAVULA SURIBABU 128W1A03G7 TCS 27
SOMAGANI SWETHA 128W1A03G9 TCS 28
TALAPANTY RAHUL RAMESH 128W1A03H0 TCS 29
TAMARAPALLI V.V.L.SAI KRISHNA
128W1A03H1 TCS 30
TUNUGUNTLA SAI VISWANTH
128W1A03H4 TCS 31
SUNEETHA MALLIREDDY 138W5A0320 TCS 32
MATURI SURYA PRAKASH 138W5A0322 TCS 33
RANDHA VAIJAYANTI RAO 138W5A0331 TCS 34
MADHIRA B S P S SATYA SAMEER
128W1A0327 TECH MAHINDRA 35
YALAGADA RAJU 128W1A03B7 TECH MAHINDRA 36
5
9 B.Supraja Reddy, B.Ram Gopal Reddy, “Review On Different Trends In Friction Stir
Welding” , International Journal Of Innovations In Engineering And Technology (IJIET),
Volume 7, Issue 1, June 2016, pp.170-178, ISSN: 2319-1058. (Scopus indexed)
10 C.Mahesh, K.Govinda Rajulu, V.Bala Krihna Murthy, “Analysis of fibre waviness effect
through homogenization approach for the prediction of effective thermal conductivities of
FRP Composite using finite element Method”, Bulletin of Material Sciences, Volume 39,
No.3, June 2016, pp. 87-855.
11 K.Srinivasa Rao, “Modelling and Design Analysis of Rotor Disc Brake” , International
Research journal of Engineering and Technology (IRJET), Volume 3, Issue 4, April 2016,
pp. 1254-1268, ISSN :2395-0072.
12 M.Bala Chennaiah, P.Nanda Kumar, K.Prahlada Rao, “Influence of Heat Input and PWHT
on the Microstructure and Mechanical properties in Dissimilar (IS2062-EN8) welded joints”,
Procedia Computer Science , May 2016, pp. 5-61.
13 Ch.Hari Krihna, M.J.Davidson, Ch.Nagaraju, P.S.Raju, G.S.Rao, “Effect of Adhesion and
Cohesion on Ductile Fracture in Cylindrical Upsettig Process”, Journal of Testing and
Evaluation, Volume 44, No.2, March 2016, pp. 983-994, doi:10.1520/JTE20150320,
ISSN0090-3973. (Scopus indexed)
14 M.Balaji, B.S.N.Murthy, N.Mohan Rao, “Multi response optimization of cutting parameters
in drilling of AISI 304 stainless steels using response surface methodology”, journal of
engineering manufacture, sagepub.co.uk / journalspermissions.nav, March 2016, DOI:
10.1177/0954405416636507, pib.sagepub.com. (Scopus indexed)
15 K.Prakash Babu, M.Bala Chennaiah, N.Krishna Mohan, “Optimization of Parameters
Influencing Weld Deposit Area in Gas Metal Arc Welding Process”, I-Managers Journal
on Mechanical Engineering, Volume 6, N0.2, Febraury-April 206, pp. 23-29, ISSN: 2230-
9055.
16 P.S.Srinivas, N.Vijaya Sai, T.Harikrishna, “Optimal land Allocation in Krishna District
Without circular Economy in crisp Environment”, International journal of scientific
&Engineering Research (IJSER), Volume 7, Issue 2, February 2016, pp. 1511-1516, ISSN:
2229-5518.
17 P.Siva Nagaraju, B.L.V.S.Gupta, “A study on effect of operating conditions on the
performance of the bubble pump of absorption-diffusion refrigeration cycles”, International
16
V Lalitha B Jyothi G BinduSarika B Navya K Sushma
FEM FLARE’16 Inter Collegiate Female Festival Quilling workshop Sketching
KLU, Vaddeswaram Participated
D Anuraga, H Himajaswini
Medha Milan 2016, 11th National Symposium for Women Paper Presentation Technical Quiz
SreeVishnau College of Engineering, Bhimavaram.
3rd in PPT 2ND in Technical Quiz
P K Bharadwaj V Mounica SK. Gousia T Srilekha N Teja K Anirudh K V N Sai Reddy N L Anil Bharadwaj
Rendezvous, brcaiit-delhi Techno Gyanam a national level championship. Automobile IC Engine Design
IIT, Delhi Participated
K Supraja Vivekananda Essay writing Competetion
AarshaBharathiVikasaParishad, Tadepalli, Guntur
2nd Prize
NO. OF STUDENTS QUALIFIED IN COMPETITIVE EXAMS
COMPETITIVE EXAM GATE GRE TOFEL IELTS
CAT No. of
students qualified
17 23 8 3 2
LIST OF B.TECH STUDENTS SELECTEDAS A PART OF PLACEMENT DRIVE
Name of the Student Register Number Name of the Company S. No
CHIMIRALA BHAVYA 118W1A0313 TCS 1.
ATTULURI.S.LAKSHMI DINESH
128W1A0302 TCS 2.
MANEESH DORA 128W1A0310 TCS 3.
JAYAVARAPU.V.VAMSI KRISHNA
128W1A0317 TCS 4.
PULAGAM GEETANJALI 128W1A0345 TCS 5.
SARANYA.KOTA 128W1A0346 TCS 6.
SHAIK ABDUL MATHIN 128W1A0347 TCS 7.
SHAIK MUBEEN PASHA 128W1A0351 TCS 8.
SISTLA. ABHIRAM KASYAP 128W1A0353 TCS 9.
6
journal of engineering research online, Volume 4, Issue 1, February 2016, ISSN: 2321-
7758.
18 T.Hari Krishna, N.Vijaya Sai, “Performance Evaluation of Banks Through Four Phased
DEA-A Case Study”, Iternational Journal of Industrial Engineering Research and
development (IJIERD), Volume 7, Issue 1, January-April 2016, pp. 24-34, ISSN No :0976-
6979.
National Journals:
1 N.Karteek, V.Bala Krishna Murthy, D.Prakash, “Harmonic analysis of mechanical hardware
of a flight data recorder”, National Journal of Technology, Vol 12, issue 2, June 2016 , pp
53-60, ISSN: 0973-1334
International Conferences:
1 M. Balaji, B.S.N.Murthy, N.Mohan Rao, “Optimization of cutting parameters in Drilling of
AISI 304 stainless Steel Using Taguchi and ANOVA (RAEREST ME 152)”, International
Conference on Global Colloquium on Recent advancements and Effectual Researches in
Engineering, Science and Technology (RAERST 16) organized by St. Joseph’s College of
Engineering and Technology, palai during 22nd and 23rd April, 2016.
2 P.Sateesh Kumar Reddy, Ch.NagaRaju, “Weight optimization and Finite element analysis
of Composite automotive drive shaft for maximu stiffness”, 5th International conference on
materials processing & characterization, organized by Department of Mechanical
Engineering, GokarajuRangaraju Institute of engineering and technology on 12th-13th March
2016.
3 K.Srinivas, B.Balu Naik, K. Kalyani Radha, “ Emission and combustion characteristics of
VCR CI Engine Fueled with Methyl Ester of palm kernel oil and Eucalyptus oil Blends”,
International conference on recent trends in engineering and material sciences(ICEMS-
2016) organized by school of Engineering & Technology and School of Life & Basic
Sciences, Jaipur National university, on 17th-19th March, 2016.pg no 137.
4 K. Srinivas, B. Balu Naik, K. Kalyani Radha, “Impact of Fuel Injection Pressure and
Compression ratio on Performance and Emission Characteristics of VCR CI Engine fueled
With Palm Kernel oil - Eucalyptus oil blends”, 5th International conference on materials
processing & characterization, organized by Department of Mechanical Engineering,
15
P SaiJaswanth B Jyothi R Prasad B Kiran Kumar Naik Anish Kumar Jain K Naveen Teja T Manasa Akshay Kumar Jain V HemaSirisha K. Poorna shashank Raja BhuvanPhani Kumar G BinduSarika
MechMantra’16 Mr& Miss MechMantra
R V R & J C College of Engineering, Guntur
Participated
J Aakash 148W1A03E0 D Eswar 148W1A03D0
Aagama 16 a national level technical paper & Working Model contest Technical Quiz
MIC College of Technology, kanchikacharla.
1st prize
K Supraja Devi FEM FLARE’16 Inter Collegiate Female Festival Essay Writing Mehendi
KLU, Vaddeswaram Participated
K Supraja, K Sai Lakshmi CH Manisha
FEM FLARE’16 Inter Collegiate Female Festival Paper Presentation
KLU, Vaddeswaram Participated Sk. Manishabi S SithaMaha Lakshmi
FEM FLARE’16 Inter Collegiate Female Festival Paper Presentation
KLU, Vaddeswaram Participated
S Rithanya V Nalini SkGousia Shamma Ali K Indraja, R LeelaBhavani
FEM FLARE’16 Inter Collegiate Female Festival Essay writing
KLU, Vaddeswaram Participated
K Sai Lakshmi FEM FLARE’16 Inter Collegiate Female Festival Essay writing, Mehendi
KLU, Vaddeswaram Participated K Supraja FEM FLARE’16 Inter Collegiate
Female Festival Essay writing and Elecution, Mehendi
KLU, Vaddeswaram Participated
S SithaMaha Lakshmi M Roopa Devi Sk. Manishabi
FEM FLARE’16 Inter Collegiate Female Festival Essay writing and Elecution, Mehendi
KLU, Vaddeswaram Participated
Sk. Manishabi B Navya K Sushma G Divya M Taruni
FEM FLARE’16 Inter Collegiate Female Festival Mehendi
KLU, Vaddeswaram Participated
M Roopa Devi B Jyothi G Divya M Taruni
FEM FLARE’16 Inter Collegiate Female Festival Nail Art
KLU, Vaddeswaram Participated
7
GokarajuRangaraju Institute of engineering and technology on 12th-13th March 2016 pg no
112.
5 V. Sudheer Kumar, Ch. Naga Raju and M. Balaji “An Investigation of Dynamic Characteristics
of Milling cutter for better Health condition monitoring”, International conference on
Technological Advancements in materials and manufacturing for industrial environment,
(TAMMIE’2016, held at KPR Institute of engineering & Technology Coimbatore, ) on
4th and 5th March 2016, ISBN 978-93-85477-74-4
6 T. HariKrishna, N.VijaySai, V.Sudheerkumar, “Modeling the performance measures of public
sector Banks”, International conference on Technological Advancements in Materials and
Manufacturing for Industrial environment (TAMMIE’2016 held at KPR Institute of engineering
& Technology Coimbatore ) on 4th and 5th March 2016. ISBN 978-93-85477-74-4
7 N.Ravikumar, P.Srikant, CH.Ranga Rao, K.MeeraSaheb “Statistical analysis of mechanical
properties of vakka fiber reinforced polypropylene composite using Taguchi method”, 5th
International conference on materials processing & characterization, organized by
Department of Mechanical Engineering, GokarajuRangaraju Institute of engineering and
technology on 12th-13th March 2016, pg no 167
8 D.Prakash, V.Balakrishnamurthy, R.Chandra Mohan, N. Karteek , “Effect of Material
Mismatch on Static behavior of Flex Seal,” 5th International conference on materials
processing & characterization, organized by Department of Mechanical Engineering,
GokarajuRangaraju Institute of engineering and technology on 12th-13th March 2016, pg no
116.
9 V.Sridhar, Ch.Ratnam, M.Ashok Chakravarthy, “Synthesis and Mechanical Characterization
of Magnesium Reinforced with Nano Alumina Composites”, 5th International conference on
materials processing & characterization, organized by Department of Mechanical
Engineering, GokarajuRangaraju Institute of engineering and technology on 12th-13th March
2016, pg no 156.
10 A. Sreenivasulu, N. Venkatachalapathi, G. Prasanthi, “Investigation of part launching rules
in a flexible manufacturing system : A simulation analysis”, international conference on
emerging novelties and vistas in space technologies and applications (ENVISTA 2016),
held at Chennai, India on 25th-27th Feb -2016.
14
R E N R Prasad P Sai Krishna
Saptavarna 16 A National level Technical, Cultural and Sports Fest CAD-Modeling
Chirala Engineering College, Chirala
1st Prize
R E N R Prasad P Sai Krishna P SaiManikantaa
Saptavarna 16 A National level Technical, Cultural and Sports Fest Quiz
Chirala Engineering College, Chirala
2nd Prize
P BhagyaRekha M N Ankitha K Sai Lakshmi J E Keertana K Supraja
Your Fest Two day National Level Techno Cultural Symposium Technical Quiz
Usha Rama College of Engineering and Technology, Telaprolu, Krishna District
Participated
T Akil Raj U Sarath Chandra (Water as Efficiency Booster)
GecFest’2k16 Paper Presentation Gemsmeet2k16
Gudlavalleru Engineering College, Gudlavalleru
3rd prize
Anjanesh Reddy Bharath Ravi Challa D DivyaBharathi Vara Prasad P.HimaBindhu
GecFest’2k16 Modern Dance
Gudlavalleru Engineering College, Gudlavalleru
2nd Prize
N SaiSampat Reddy P BindhuHarsha P SaiSusmitha (Solar Chimney Technology)
GecFest’2k16 Paper Presentation Gemsmeet2k16
Gudlavalleru Engineering College, Gudlavalleru
Participated
T Vivek R Madhusudhana Rao G Joshi A L S SarathBabu
GecFest’2k16 Robo Race
Gudlavalleru Engineering College, Gudlavalleru
Participated
T Manasa V HemaSirisha K Poornashashank Raja BhuvanPhani Kumar Akshay Kumar Jain R Prasad B Jyothi G BinduSarika
MechMantra’16 Quiz
R V R & J C College of Engineering, Guntur
Participated
P SaiJaswanth B Kiran Kumar Naik Anish Kumar Jain K Naveen Teja T Manasa V HemaSirisha R Prasad G BinduSarika
MechMantra’16 Auto-Cad
R V R & J C College of Engineering, Guntur
Participated
P SaiJaswanth Anish Kumar Jain SaiSusmitha P N Sampath V HemaSirisha K Poornashashank B Jyothi
MechMantra’16 Engine X
R V R & J C College of Engineering, Guntur
Participated
8
WORKSHOP/SEMINAR ATTENDED
1. M.Sumalatha, A.N.Phani Deepthi, B.Supraja Reddy attended a One Week National
Workshop on “Non-Destructive Techniques” at Shri Vishnu Engineering College for Women,
Bhimavaram during 4th-8th January 2016.
2. T.Hari Krishna attended a One Week National Workshop on “Renewable Energy and
Sustainable Development” at IIT, Varanasi during18th-22ndJanuary 2016.
3. K.Siva Prasad attended Three Day National Workshop on “Recent Trends and Research
Opportunities in Manufacturing Processes” at VNR Vignana Jyothi Institute of Engineering
And Technology during 9th-11th March 2016.
4. A. Mallikarjuna Rao attended a One Day National Workshop on “Srartups and
Entrepreneurship Orientation” at JNTUK, Kakinada on 10th March 2016.
GUEST LECTURE ORGANIZED
1. A Guest Lecture on “An Interactive Session On Successful Entrepreneurship” by
Sri.B.V.SeshatalpaSai, Promoter & Managing Director Of Praslshar Bio-Products Private
Limited on 6thJanuary 2016.
2. A Guest Lecture on “A Talk On Inner Engineering” By Sri.V.Bala Krishna, Smt.M.Sowjanya
and Sri.K.Srinivasa Rao are the resources persons from ISHA Foundation, Coimbatore
on 22nd January 2016.
GUEST LECTURES DELIVERED BY THE FACULTY
1. Dr. V. Bala Krishna Murthy, Professor, Department of Mechanical Engineering, delivered a
guest lecture on “Interlaminar Fracture Analysis of FRP” at Sri. C. R. Reddy College of
Engineering, Eluru.
2. Dr. N. VijayaSai, Professor and Head, Department of Mechanical Engineering, delivered
a guest lecture on “Outcome based education process and parameters” at St. Joseph’s
Engineering College,Mangalore, Karnataka.
3. Dr. N. VijayaSai, Professor and Head, Department of Mechanical Engineering, delivered
a guest lecture on “Teaching and learning process” at Sri Sivani College of Engineering,
Srikakulam.
13
Anjanesh Reddy Bharath DivyaBharathi
SITAR 2K16, Techno cultural Fest Group Folk Dance
PVPSIT, Vijayawada 2nd Prize
M Saichand V ChinnaKaluNaik J Aakash D Eswer
SITAR 2K16, Techno cultural Fest Technical Events
PVPSIT, Vijayawada Participated
Anjanesh Reddy Bharath Ravi Challa D DivyaBharathi Vara Prasad P.HimaBindhu
Dhanush 2K16, Techno cultural Fest Nruthyam( group)
DIET, Vijayawada 1st Prize
SK.Shaffi Anjanesh Reddy Jagn Mohan P.HimaBindhu
Dhanush 2K16, Techno cultural Fest Ragam (group)
DIET, Vijayawada 1st Prize
V Saisanjay Dhanush 2K16, Techno cultural Fest Engine Assembly
DIET, Vijayawada 2nd prize
V Saisanjay Dhanush 2K16, Techno cultural Fest Lab View
DIET, Vijayawada 2nd prize
SK Ahmed Basha Dhanush 2K16, Techno cultural Fest Engine Assembly
DIET, Vijayawada 2nd prize
SK Ahmed Basha Dhanush 2K16, Techno cultural Fest Lab View
DIET, Vijayawada 2nd prize
K Poornashashank R Prasad G BinduSarika B Jyothi D Mohan Krishna
Dhanush 2K16, Techno cultural Fest Technical Quiz Engine assembly
DIET, Vijayawada Participated
SajjaNikkil U Hanudeep K Sreeharsha T rohitroy R Avinash S Vinay Kumar Y R Lakshmanarao Y MeherSaketh C PremSai A SatyaKalyanaNaik B Raju Krishna Naik
KITS Yuva National Level Student Technical Meet Sports (Kabaddi, Running race)
KKR & KSR Institute of Technology and Sciences, Vatticherukuru, Guntur
Participated
P N S S H Aditya M V S Rayudu
Torque’16 A National Level Technical Symposium Posterite (Poster Presentation)
J N T U Kakinada 2nd Prize
R V D Sai Krishna P Kiran Kumar
Torque’16 A National Level Technical Symposium Thermal Texibit (Paper Presentation)
2nd Prize
P Sai Krishna R E N R Prasad
Saptavarna 16 A National level Technical, Cultural and Sports Fest Paper Presentation
Chirala Engineering College, Chirala
2nd Prize
9
S.No Name Designation &Dept
Details of Membership
Name of the Body
Date of Appointment
1 Dr.V.Bala Krishna Murthy
Professor Mechanical Dept.
BOS (Member)
Bapatla Engineering College
2015-16
Ph.D. REGISTERED
Sl. No Name Department Designation University
Year of Registration
Specialization
1 G. Srivalli Mechanical Engineering Asst. Profesor ANU 2015
Computational Fluid Dynamics
ON-GOING RESEARCH PROJECTS
S.No Title of the Project Funding
Agency & Scheme
Amount in Lakhs (Rs),Year & Period
Sanctioned month/year
Name of PI/Coordinator
& Co-Investigators
1
Machine Vision Technology for automobile and Agricultural based small scale industries
F.No: 8-217-RIFD/RPS/POLICY-1/2014-15
RPS
12.70588
2015
(3 years)
March 2015 Dr N. Ravi Kumar
2
Center Of Excelence in composites
F.No.:SR/FST/college-210/2014
FIST-DST
40.00
2014
(5 Years)
Nov 2014 Dr. A. V. Ratna Prasad
3
Investigating the effect of heat treatment on microstructure & Mechanical properties of weldments using computer integrated optical microscope
F.No.: 4-4/2014-15 (MRP-SEM/UGC-SERO).
UGC
(MRP)
Hyderabad
3.3
2014
(3 Years)
Nov 2014 Mr. M. Bala Chennaiah
Student Name Name of the event Organizer details Prize won
J E Keerthana D Anuraga K Supraja
BECTAGON 2K16 Technical Paper
Bapatla Engineering College, Bapatla
Participated
J E Keerthana D Anuraga K Supraja
BECTAGON 2K16 Social Event (Come and share)
Bapatla Engineering College, Bapatla
Participated
ChManisha
JNTUK Inter collegiate Tournament 2015-16 Of Central ZoneBadminton
Sri Vishnu Engg College for Women
Winners
ChManisha
JNTUK Inter collegiate Tournament 2015-16 Of Central ZoneTable Tennis
Sri Vishnu Engg College for Women
Winners
ChManisha
Gecfest’16 sports and games competition Table Tennis Doubles
Gudlavalleru Engineering College, Gudlavalleru
Participated
I.E Keerthana D Anuragha
Cyclothan-2k’16 Andhra bicycling club, Vijayawada
Participated
S Mahith V VSpandana M Narasimha K Anudeep K Harsha M Devi KrishnaSai T Hemanth S Nikhil Teja U Hanudeep T A Rahit Roy N Sravani SK Imthiazuddin K Srikanth
Mechanica 2016 3D Modeling
IIT, Madras
Participated
D MeherSaketh S Vinay Kumar D Mohan Krishna
Mechanica 2016 IC Engines, MatLab, Ultimate Hands on
IIT, Madras
Participated
D Mohan Krishna
Mechanica 2016 Mechmania open quiz Lecture & project x, IC Engines, MatLab
IIT, Madras
Participated
R Vijay Durga Prasad B Chaitanya V J S DurgaVara Prasad CH Manisha CH Sobha Rani R B Phani Kumar
Mechanica 2016 IC Engines, MatLab, 3D Modeling
IIT, Madras
Participated
R B Phani Kumar Mechanica 2016 Mechmania open quiz
IIT, Madras
Participated
Anjanesh Reddy Bharath Ravi Challa D DivyaBharathi Vara Prasad P.HimaBindhu
SITAR 2K16, Techno cultural Fest Group Western Dance
PVPSIT, Vijayawada 1st Prize
12
CO-CURRICULAR AND EXTRA-CURRICULAR ACTIVITIES HONORARY MEMBERSHIPS
10
4
Composite flex seal design
F. No: DRDL/21/15F/2015/028/031F
DRDL
Hyderabad
9
2013
(6 Months)
July 2013 Dr N. Ravi Kumar
5
Experimental investigation of agro waste- nano clay reinforced composites -Mechanical & Thermal properties
F.No.: 41-985/2012(SR)
UGC
(MRP)
11.76
2012
(3 years)
July 2012 Dr. A. V. Ratna Prasad
CONSULTANCY & TESTING
(i) Revenue earned through Consultancy: Rs. 1,55,353/-
S.No Nature of the work Agency to which consultancy is offered
Revenue
earned
in Rs.
1 Tensile,Flexural and Impact Testing B Radha Rani, S.Venkateswara Rao,K.Avinash, SVH collegeMachilipatnam
13,053
2 Tensile,Flexural and Impact Testing G. SaiKrishna,V.Murali, PVPSIT KANURU 9,733
3 Tensile,Flexural and Impact Testing M.SaiKrishna, N.Siva Naga RajuA.Pavankumar, SRK Institute of Technology
20,868
4 Tensile and Flexural Testing B. Anand, IIT Nuzveed 2,061
5 Tensile,Flexural and Impact Testing N. Ramesh, N.Ramesh/Siva kumar, AluriGiriprakash, QIS College of Engineering , Ongole
24,847
6 Tensile and Flexural Testing T. Siva kotireddyTirumala Engineering college 7,157
7 TenFlexural and Impact Testing D.VijayaRaju, KITS Guntur 6,956
8 Tensile,Flexural and Impact Testing M.Gopinath, S.R.K.R Bhimavaram 9,447
9 Tensile and Flexural Testing Ch.Sukumar, D.krishnaprasad reddy, K.Kishore, NRI Institute of technology 4,122
10 Tensile and Flexural Testing N.Saikumar, P.Kaleswara Rao, DVR&HS MIC COLLEGE, Kanchikacharla
4,122
11 Tensile and Flexural Testing K.Hanumantharao K.H Institute of Technology, Guntur
4,122
12 Impact Testing C.V.Sai Anil Kumar, M.P.E.S. GROUP OF INSTITUTIONS.
2,405
13 Tensile and Flexural, Sonication
Testing Mr.K.Sumanth, K.L university, Guntur 6,641
11
14 Tensile,Flexural and Impact Testing Mr.M.Srinivas Reddy, Vignan university, Guntur
5,411
15 Tensile Testing Ms.V.JanshiGayatriEngg college. Vizag 4,638
16
Performance and Emission parameters for diesel, blended with Ethanol, blended with Vegetable oil, blended with palm oil, with Additives, with Additives of ether&Acetate
SRK Institute of Technology, Vijayawada
29,770
STUDENT ACTIVITIES
INDUSTRIAL VISITS:
Sl. No
Date No. of Students
Participated
Branch Touring class
Name of the Industries
Local / Out Side
Place(s)
1 01-02-2016 02-02-2016 18-03-2016
175 ME
III/IV B.Tech 6th SEM A,B,C
Sections
APSRTC Zonal w/s
Local Vidyadharapuram Vijayawada
2 05-03-2016 17-03-2016 18-03-2016
175 ME
II/IV B.Tech ,ME,
4thsemester,A,B,C Sections
Kusalava international
ltd. Local
Adivinekkalam, Nuzvid Road
3 25-06-2016 29 ME
IIsemesterM.Tech,
(Thermal & CAD/CAM)
Resins and Allied
Products (RAP)
Local Nidamanuru, Vijayawada
S.
No Nature of the equipment Laboratory
Amount
spent (Rs)
1 Models of kinematics machines Design Lab 1,63,506
2 Bosch make power tool with accessories Basic Workshop 95,000
3 Digital micro meter, vernier Metrology Lab 28,500
4 ANSYS V16.0 (50 users)
Computer Lab
4,99,900
5 ANSYS V 16.0
(research upgradation) 1 user
5,00,000
6 High end work station 4,65,000
7 Optical Microscope Integrated Camara,
Software Metal Plus(Foundry) R & D
2,49,900
8 HP Commercial Desktop Computers (4) CAM Lab 1,43,556
9 HP Commercial Desktop Computers (2) Mechatronics Lab 71,778
TOTAL 22,17,140
EQUIPMENTS PURCHASED
top related