workshop on modeling and simulation of next generation optical … · 2018. 10. 4. · invited...
Post on 18-Aug-2020
1 Views
Preview:
TRANSCRIPT
Workshop on Modeling and Simulation of Next Generation
Optical Communication and Networks (WNGOCN-2017)
& Inauguration of SRM-OSA Student Chapter
December 01-02, 2017
In association with
OSA, OSI, IETE, LumericalInc
Fiber Optic Services, Supreme Scientific Corporation
DEPARTMENT OF ECE Faculty of Engineering and Technology, SRM University
Kattankulathur – 603203, Kancheepuram Dt., Tamilnadu, India Ph: 044-27417777 Fax: 044-27453903
Website: www.srmuniv.ac.in
Dr. T.R. Parivendhar, Founder Chancellor Mr. Ravi Pachamoothoo, Chairman Dr. P. Sathyanarayanan, President Dr. R. Shivakumar, Vice-President
Dr.Prabir K Bagchi, Vice-Chancellor Dr. T.P. Ganesan, Pro Vice-Chancellor (P&D) Dr. N. Sethuraman, Registrar Dr. C. Muthamizhchelvan, Director (E&T) Dr. T. Rama Rao, Prof & Head, ECE Department
Dr.Shanthi Prince, Convener Mrs. R. Manohari, Coordinator Mr. A.V.M. Manikandan, Coordinator Mrs. M. Valarmathi Mrs. S. Kolangiammal Mrs. S. VasanthadevSuryakala Mrs. V. Padmajothi Mrs. S.T. Aarthy Mr. S. Nivash Mr. A. Joshua Jafferson Mrs. A. Vinnarasi Mr. E. Elamaran Mrs. S. Diana Emerald Aasha Mrs. G. SuganthiBrindha Ms. A. Ramya Mrs. G. Kalaimagal& Mrs. A. AniletBala
Organizing Committee
1
1. About the SRM University 2
2. About the ECE Department 3
3. About the Workshop 4
4. Theme of the Workshop 4
5. Resource Persons 5
6. Program Schedule 6
7. SRM-OSA Local Chapter 8
8. Keynote Address-1 Photonics for Quantum Communications & Quantum Computing by Dr. Srinivas Talabattula, Assoc. Prof., IISc
10
9. Keynote Address-2 Radio Over Fiber Communication by Dr. M. Ganesh Madhan, Professor, MIT
11
10. Keynote Address-3 Needs & Challenges in Underwater Wireless Commn. Mr. N. Vedachalam, Scientist-F, NIOT, Chennai
12
11. Keynote Address-4 Nonlinear Silicon Photonic Devices For High Speed Optical Communication, Dr. Varun Raghunathan, Asst. Prof., IISc
13
12. Keynote Address-5 Wireless Optical Communication by Dr. D. Sriram Kumar, Professor & Head, Department of ECE, NIT-Trichy
14
13. Tech Talk-1 Introduction to Converged Packet-Optical SDN, Mr. Ruturaj Kadikar, Senior Research Associate, CSE, SRM University
15
14. Tech Talk-2 Free Space Optics: An Opportunity To Move Beyond Radio Mr. Rahul Bosu, Research Scholar, ECE, SRM University
16
15. Tech Talk-3 Challenges of Optical Network and Opportunities in India Mr. Vivek Kachhatiya, Research Scholar, ECE, SRM University
17
16. Hands-on Practice FDTD Solutions using Lumerical 19
17. Hands-on Practice OptSIM and OptSIM Circuit 22
18. Crossword Puzzle Rohan Katti 26
19. Article-1 CORD at a glance by Ruturaj Kadikar 28
20. Article-2 Finally, SDN's Time Come for Optical Network by Vivek Kachhatiya
30
21. Article-3 Do you know? by Rohan Katti 31
22. Article-4 Bio-Organic Optoelectronic Devices using DNA by S. Diana Emerald Aasha
32
23. Article-5 Terahertz Photonics by Rohan Katti 34
24. Article-6 Industrial Advances in SDN Oriented Optical Networks by Ruturaj Kadikar
37
25. Article-7 All-Optical Cryptography by M. Valarmathi 39
26. Article-8 Buy Lumens, Not Watts by G. Kalaimagal 40
27. Article-9 Benefits of Incorporating SDN in Optical NWs by Ruturaj Kadikar
41
28. Article-10 Visible Light Communication (VLC) by A. Ramya 42
29. Article-11 All-Optical Signal Processing by R. Manohari 44
30. Solution for Crossword 45
2
About SRM University
SRM Institute of Science and Technology (SRM University) is one of the top ranked universities in India
with over 51,000 students and 2,800 faculty members, offering a wide range of Undergraduate,
Postgraduate and Doctoral Programs in Engineering, Medicine & Health Sciences, Management, Science
& Humanities and Law.
Over the last three decades, it has set standards in experiential learning and knowledge creation across
various fields. It has reached beyond borders to universities and corporate across India and around the
World. There are 4 sprawling campuses in Chennai and one near New Delhi spread across 250 acres with
all facility.
It had conducted 98th Indian Science Congress in January, 2011 which was attended by 7,000 delegates
from India and abroad, including six Nobel Laureates and several eminent scientists. SRM University is
the first private university in India to launch a nano-satellite, named SRMSAT, into space, on board the
PSLV-C18 from Sriharikota on October 12, 2011.
SRM University is accredited by NAAC with 'A' Grade in 2013. QS, the world renowned international
ranking agency, has rated SRM as a ‘4-Star’ university with ‘5- Star Ratings’ in Teaching, Employability
and Inclusiveness.
3
About the Department
The Department of Electronics and Communication Engineering (ECE) was established in 1991 under
the affiliation of University of Madras. It offers one UG Program, three PG programs and Doctoral
Program. It has 18 well equipped labs. It has ample resources in computing equipment, including personal
computers running the full suite of CADENCE, OrCAD, MATLAB and Network Simulation softwares.
It has USRP-RIO SDR hardware, Vector Signal Generator & Analyzer, Network Analyzer and ADS &
HFSS tools.
The department has strong collaboration with industries such as Central Electronics Engineering
Research Institute (CEERI) Chennai, Nuvoton Technology Corporation, Taiwan, National Instruments
and ALTERA. It received research grants from Department of Science and Technology (DST) under
Funds for Improvement of Science and Technology (FIST), in the area of MIMO-OFDM. Recently, it
has received research grants for 3 projects from Defence Research and Development Organization
(DRDO) and Indian Space Research Organization (ISRO). The B.Tech (ECE) program of
Kattankulathur campus of SRM University is accredited by EAC of ABET. www.abet.org
4
About the Workshop
To meet the computing and communications needs which are growing multi-folds, a ‘tera-era’ vision is
proposed for the future of information technology which demands high speed and high capacity
communication. Central advances towards the tera-era will involve optical technologies.
All elements of information transport are likely to require optical fibers and lasers, including 100-
gigabit-per-second access networks, 10-gigabit-per-second local area networks, and even 1 gigabit per
second to the desktop. It will also ''future-proof" the network against the bandwidth needs of future
services that do not even exist yet but that recent history indicates are sure to emerge.
The purpose of the workshop is to enlighten the need of optical technologies for next generation
communication and networks and kindle the interest of participants towards this pervasive and
primordial technology.
Theme of the Workshop
The aim of this workshop is to serve as a forum for effective exchange of scientific knowledge and
experience among experts, researchers active in the field of optical communications, discuss various
challenges posed by the next generation optical technologies and propose ideas and solutions to
transform the current scenario of optical communication technologies. The workshop is also intended to
provide a platform to access next generation optical communication technologies available to researchers
in India. This workshop will provide an introductory overview of
Need for next generation optical communication and networks.
Various network topologies which can provide a viable solution in next generation systems.
Research areas which can be exploited so that potential problems in the related fields can be
addressed.
Hands-on session guiding the attendees through the design of various network and system topologies
for next generation optical communication.
5
Resource Persons
Invited lectures are delivered by experts in this area on the basic aspects and recent advancements in the
area of optical wireless communication and Networks. Speakers will include:
1. Dr. Srinivas Talabattula, Associate Professor, Electrical & Commn. Engg, IISc, Bangalore
2. Dr. Varun Raghunathan, Assistant Professor, Electrical & Commn. Engg, IISc, Bangalore
3. Dr. M. Ganesh Madhan, Professor, Dept. of Electronics Engg, MIT, Chromepet, Chennai
4. Dr. D. Sriram Kumar, Associate Professor, Department of ECE, NIT Trichy.
5. Mr. N. Vedachalam, Scientist-F, National Institute of Ocean Technology, Chennai.
6. Mr. K. Sripadaraja, Product Manager, SriDutt Technologies Pvt. Ltd., Bangalore.
7. Mr. Arul Prakash, Product Engineer, Supreme Scientific Corporation Ltd., Madurai.
6
Friday, December 01, 2017
08.30 Registration
09.00 Inauguration of WNGOCN-2017 and SRM-OSA Student Chapter
09.30 Keynote address on Photonics for Quantum Commns. & Quantum Computing Dr. Srinivas Talabattula, Associate Professor, Electrical & Commn. Engg., IISc
10.30 Tea Break
10.45 Keynote address on Radio Over Fiber Communication Dr. M. Ganesh Madhan, Professor, Electronics Engineering, MIT, Chennai
11.45 Keynote address on Needs & Challenges in Underwater Wireless Communication Mr. N. Vedachalam, Scientist-F, Project Director, NIOT, Chennai
12.45 Lunch Break
13.45 Overview of Lumerial Tool Mr. Sripadaraja, Applications Engineer, SriDutt Technologies Pvt. Ltd., Bangalore
14.30 Hands-on session on FDTD using Lumerical Tools
16.00 Tea break
16.15 Tech Talk on Introduction to Converged Packet-Optical SDN Mr. Ruturaj Kadikar, Senior Research Associate, Dept. of CSE, SRM University
17.00 End of Day-1
Saturday, December 02, 2017
09.00 Keynote address on Nonlinear Silicon Photonic Devices for High Speed Optical Commn.
Dr. Varun Raghunathan, Assistant Professor, Electrical Communication Engineering, IISc
10.00 Tech Talk on Free Space Optics: An Opportunity to Move Beyond Radio Mr. Rahul Bosu, Research Scholar, Department of ECE, SRM University
10.45 Tea Break
11.00 Keynote address on Wireless Optical Communication Dr. D. Sriram Kumar, Professor & Head, Department of ECE, NIT-Trichy
12.00 Tech Talk on Challenges of Optical Network and Opportunities In India Mr. Vivek Kachhatiya, Research Scholar, Department of ECE, SRM University
12.45 Lunch Break
13.45 Hands-on training on OptSIM V2017 Mr. Arul Prakash, Product Engineer, Supreme Scientific Corporation, Madurai
15.15 Tea Break
16.30 Valedictory Ceremony
17.00 End of Day-2 & Workshop
7
Inaugural Ceremony @ 09.00 Hours on Friday, December 01, 2017 Host: Mr. E. Elamaran & Mrs. A. Vinnarasi, Assistant Professors (OG), ECE
Invocation
Welcome Address Dr. Shanthi Prince, Convener, WNGOCN’17
Overview of the Workshop and Activities Mrs. R. Manohari, Coordinator, WNGOCN’17
Overview of OSA - The Optical Society Mr. Rohan Katti, President of Student Chapter & The Student Chapter Research Scholar, ECE, SRM University
Introduction of the Chief Guest Mrs. M. Valarmathi, Asst. Prof. (SG), ECE
Memento Presentation to the Chief Guest Dr. T. Rama Rao, Prof. & Head, ECE
Inauguration of SRM-OSA Student Chapter Dr. Srinivas Talabattula, Assoc. Prof., IISc
Introduction of Guest of Honor Mrs. Diana Emerald Aasha, Asst. Prof., ECE
Memento Presentation to Guest of Honor Dr. T. Rama Rao, Prof. & Head, ECE
Release of the Souvenir Dr. M. Ganesh Madhan, Professor, MIT
Presidential Address Dr. T. Rama Rao, Prof. & Head, ECE
Inaugural Address / Keynote address Dr. Srinivas Talabattula, Assoc. Prof., IISc
Valedictory Ceremony @ 16.30 Hours on Saturday, December 02, 2017 Host: Mr. E. Elamaran & Mrs. A. Vinnarasi, Assistant Professors (OG), ECE
Feedback by Participants Mrs. Anilet Bala, Asst. Prof. (OG), ECE
Closing Remarks Mr. Manikandan AVM, Asst. Prof. (SG), ECE
Distribution of Certificates Dr. Shanthi Prince, Professor, ECE Dr. T. Rama Rao, Prof. & Head, ECE
Vote of Thanks Mr. S. Nivash, Asst. Prof. (OG), ECE
National Anthem
Group Photograph
8
The Optical Society (originally established as The Optical Society of America, OSA) is a scientific
society dedicated to advancing the study of light - optics and photonics - in theory and
application, by means of publishing, organizing conferences and exhibitions, partnership with
industry, and education. Headquartered in Washington, USA, the Optical Society is the leading
global professional association in optics and photonics. Through world-renowned publications,
meetings, and membership programs, The Optical Society provides quality information and
inspiring interactions that power achievements in the science of light to a global network. OSA
was founded in 1916, under the leadership of Perley G. Nutting, with 30 optical scientists and
instrument makers based in Rochester, New York. OSA soon began publication of its first
journal of research results and established an annual meeting. It was founded as the "Optical
Society of America" and has evolved into a global enterprise with a worldwide constituency. In
recognition of this, the society was renamed in 2008 as The Optical Society (OSA).
The Optical Society's (OSA) mission is to promote the generation, application and archiving of
knowledge in optics and photonics and to disseminate this knowledge worldwide. The purposes
of the Society are scientific, technical and educational. OSA’s commitment to excellence and
long-term learning is the driving force behind all its initiatives. To support this mission, the
Society is committed to a set of core values known as "i4" which are Innovation, Integrity,
Inclusivity and Impact.
OSA can count more than 19,000 members from more than 100 countries, a global network of
358 student chapters, 21 local sections and management of 45 conferences and meetings
including some of the most important meetings and events in optics and photonics, 17 peer
reviewed journals providing 40 % citations and 35 % of published articles in optics and
photonics.
Membership benefits
An OSA Membership provides exclusive access to an unparalleled professional network, cutting-
edge information and valuable resources to enhance your career and business.
OSA membership allows subscriptions to Optical and Photonics News magazines and Physics
Today magazine, 50 downloads from OSA journals, 5 technical group affiliations, grants,
leadership and award opportunities.
For more details, visit www.osa.org
9
OSA supports an extensive global network of more than 350 Student Chapters. These chapters,
managed for and by students, create valuable opportunities for professional development and
foster lasting relationships between peers and mentors.
OSA student chapters support your academic studies, power your research and provide
opportunities that will propel your career in optics and photonics. In addition to their benefits
for members, many chapters are heavily involved with community and youth education outreach
to provide both a service to their community and work to disseminate the knowledge of optics
and photonics worldwide. OSA Student Chapters receive many benefits including: activity and
travel grants, guest lecture resources, networking opportunities, and much more!
Having being inspired from the mission of OSA and to contribute its part in the field of Optics
and Photonics, Department of ECE, SRM University has taken the lead to start the OSA student
chapter. SRM - OSA Student chapter will be inaugurated on 01/12/2017 along with Workshop
on Modelling and Simulation of Next Generation Optical Communication and Networks to be
conducted by the Department of ECE, SRM University during 01-02, December 2017. The SRM
- OSA Student chapter currently has 6 members. The office bearers are
Faculty Advisor Dr. Shanthi Prince, Professor, Department of ECE President Mr. Rohan Katti, Research Scholar, Department of ECE Vice–President Mr. Vivek Kachhatiya, Research Scholar, Department of ECE Secretary Mr. Ruturaj Kadikar, Research Associate, Department of CSE Treasurer Mr. Rahul Bosu, Research Scholar, Department of ECE
The tentative schedule of programs for the session January to April, 2018 is given below
January 2018 Photography contest on optics based phenomenon in SRM campus February 2018 Community outreach program to a nearby school March 2018 Tech Talk April 2018 Challenge for optical innovation
10
Keynote Address-1 Photonics for Quantum Communications and Quantum Computing
Dr. Srinivas Talabattula, Associate Professor, Electrical & Commn. Engg, IISc, Bangalore
Quantum Communications and computing involves dealing with information represented by quantum states of objects like photons. The key feature is that '0' and '1' levels are not deterministic, but expectations of wave functions. Information is represented as superposition of these quantum states. Quantum information theory presents several strange results, such as no cloning, entanglement, and discord. Quantum approach provides enormous possibilities, such as super dense representation and storage of classical information, perfect security, and enormous computing possibility. Implementation is a challenge due to requirement of devices. Photonics promises to provide solutions to many of these challenges. Recently several implementations of quantum information systems have been successfully demonstrated. For example Tokyo QKD network (2010) and World's first quantum computer (as claimed by China, Aug 2016). In this presentation, after a brief description of basics of quantum communication, we present the representation of quantum information using optical waveguide modes. Then a few examples of implementation will be discussed, namely, directional coupler output as an analog of superposition state, quantum Hadamard gate using photonic bandgap structures, etc. Finally we examine a higher dimensional representation of quantum information using Qubits and the corresponding BB84 protocol for highly secure quantum communication.
Biosketch Dr. Srinivas Talabattula has graduated from New Science College, Hyderabad, with B Sc( Hons) in physics. He did his Integrated-M.E. and PhD from IISc, Bangalore. His Ph.D. was primarily focused on: Application of coupled mode theory to fiber and integrated optic waveguide structures. Later, he worked in Toyohashi University of Technology, Japan, during 1992-98 as a Post-Doctoral Research Fellow on tapered optical waveguide couplers and integrated optical amplifiers. Currently, he is an Associate Professor in the ECE department at Indian Institute of Science (IISc), Bangalore. Dr. Srinivas Talabattula has been active in the research field since 2003 and has major research interests in the areas of Photonics integrated Circuits with application to optical communication, optical sensors and quantum photonics. His overall research work has got 661 citations with h-index of 12. His research paper entitled: “Investigation of ring resonators in photonic crystal circuits” has got the highest number of citations, till date. Besides this, he has been acting as a reviewer to several peer-reviewed journals and conferences, notably IEEE PTL, Journal of modern optics, Journal of Optical Society of America, Current Science to name a few. Furthermore, he has been involved in sponsored research projects like, national program on smart structures (NPMASS) & systems, national program on micro-optics and nano photonics (NPMN). He is the secretary of IEEE Photonics Society Chapter, Bangalore Section and has supported several IEEE society chapters and many IEEE student Branches in Bangalore Section.
11
Keynote Address-2 Radio Over Fiber Communication
Dr. M. Ganesh Madhan, Professor, Electronics Engineering, MIT, Anna University, Chennai
Radio over Fiber (RoF) communication encompasses the technologies involved in delivery of
high quality analog, digital modulated high frequency signals over the fiber to the intended area.
The applications of this technology are wide spread in cellular mobile communications, phased
array radar and antenna remoting. In the case of mobile communications, providing access to
basements, tunnels and signal shadow regions have been realized. The optical fiber based CATV
transmission is a well-known application for providing QPSK and QAM based digital TV signals
for the subscribers. Recently, Ultra-wide band signals (UWB) have also be transported through
fiber for enhanced coverage. However, the diverse requirements of different applications impose
stringent requirements on the laser diodes and the transmitter circuits. One of the techniques to
improve the modulation depth in directly modulated laser diodes for RoF applications is the gain
levering mechanism. This can be realized by slightly modifying the structure of the laser diode
and biasing it appropriately. Signal to Noise ratio (SNR) of the link depends on the modulation
depth provided by the laser diode. The details of the Radio over fiber technology, gain lever
mechanism and challenges involved will be discussed in the presentation.
Biosketch
M.Ganesh Madhan, received his B.E degree in Electronics and Communication Engineering
from Madurai Kamaraj University, India, M.E degree in Optical Communications from College
of Engg, Guindy, Anna University. He was a CSIR junior research fellow at Anna University for
a short period and subsequently joined as a lecturer in the same institute. He worked for his
Ph.D in the area of Optical bistability in Semiconductor laser diodes, under the joint supervision
of Prof..P.R.Vaya, Head, Semiconductor Device research laboratory, IIT,Madras and Prof.
N.Gunasekaran, Anna University, and obtained his Ph.D in 2001. Currently he is a Professor of
Electronics Engineering in the Madras Institute of Technology campus of Anna University.
He has about 50 International Journal papers and 100 conference papers to his credit. His
current research interests include design, modeling of opto - electronic devices, RF and optical
communication systems. Two scholars have obtained their Ph.D degrees under his guidance.
Currently he is guiding 8 candidates for Doctoral research in the above areas. He has guided a
number of M.E and B.E students in the area of optical and RF communications. He has also
carried out a number of consultancy and testing projects in the area of RF and optical
communications. He has successfully completed a research project for CVRDE, DRDO with a
grant of 9.8 Lakhs. He is serving as a reviewer for International Journals and conferences in the
areas of optical and RF communication systems. He also organizes a number of short term
continuing education programmes at Anna University. He is also serving as the Professor – In
charge of University Library at M.I.T.Campus. He has also served as the invited, technical
committee member in the Tamil Nadu Govt. Initiative on Solar energy based streets and home
lighting project during 2012 - 2013.
12
Keynote Address-3 Needs and Challenges in Underwater Wireless Communication
N. Vedachalam, Scientist-F/Project Director, NIOT, Chennai
Oceans covering 72% of the Earth’s surface houses immense living and non-living resources
and plays a key role in regulating the planet’s climate. At the same time, Oceans create
environmental threats to the coastline in the form of cyclones and tsunamis. The future of the
humanity is dependent on the health of the Oceans, and the goods and services provided by it.
To date, Blue economy, is the 7th largest economy in the world accounting to US$ 2.5 trillion,
and the total GDP of the global oceans is estimated to be ~ US$24 trillion. Oceans are a source
of water, minerals, hydrocarbons and food. Technology is the key for carrying out effective
exploration and safe exploitation of the ocean resources, ocean monitoring for advance warning,
and for studying the planet right from the world’s deep hydrothermal vents till the Polar ice
shelves. Effective underwater communication and precise position determination are essential
for advancing the Ocean activities. Terrestrial GPS and satellites could not be used for
underwater positioning and communications as the radio frequency signals experience
attenuation in the saline sea water medium. Till date, acoustic communications are used and their
use is limited by the bandwidth, Doppler spread and multipath reflection, thus limiting the data
rate up to 10 kbps at longer distances. Based on this underwater multi-hop sensor networks,
which are event-based systems are under realization.
Wireless optical communication, (OWC) is one of the emerging effective techniques for high
bandwidth underwater data transfers involving shorter distances. The limitation in range is due
to the absorption and scattering of the light by the suspended particles in water medium.
However, blue-green wavelength of the visible spectrum, having lower attenuation is capable of
reaching increased distances. Even though lasers are used for high data rate transfers, they
require very precise physical alignments which is challenging in the hydrodynamic environment.
Light emitting diodes are used for achieving moderate data rates at increased distances. Hence
they are effective in collecting in-situ data from stand-alone subsea observatories using
autonomous vehicles when in the line of sight, dispensing the need for recovering the system to
ship or using costly ROV-enabled wet mate interfaces. However the ultimate effectiveness of
the OWC depends on the transmitter power, receiver sensitivity, modulation technique adopted,
ambient light levels, electronic system noise, aiming and tracking strategies.
Biosketch
N. Vedachalam is a Senior Scientist at the National Institute of Technology (NIOT), an
Autonomous institution under the Ministry of Earth Sciences, Chennai, India. His work areas
include subsea robotics, gas hydrate production technologies, and reliability centered system
engineering. His 22 years of experience covers industrial power, process, offshore, and subsea
domains. The technical exposure includes development of multi-megawatt power electronic
converters, control systems, and energy storage for the long step out deep-water enhanced
hydrocarbon recovery systems; ocean renewable energy systems including ocean thermal energy
conversion (OTEC), wave energy systems and subsea grids for tidal energy farms; subsea
intervention systems including deep-water work class remotely operated vehicles; and industrial
power generation, utilization and boiler control systems. He is the Secretary of IEEE Ocean
Engineering Society- India Chapter, Executive Member of Marine Technology Society- India
Section and Senior Member- Bureau of Indian Standards. He has about 40 publications in
science citation indexed international journals, holds one international and two national patents
in the areas of subsea robotics, subsea process and gas hydrates production.
13
Keynote Address-4 Nonlinear Silicon Photonic Devices For High Speed Optical
Communication Varun Raghunathan, Assistant Professor, Electrical Communication Engineering, IISc, Bangalore
The explosion in bandwidth requirement for data and communication needs in recent times is
resulting in exploration of new revolutionary technologies for the physical layers to support the
high data rates. Silicon photonics in one such revolutionary technology that deals with high
density integration of photonic and electronic components on the same silicon chip to support
high data rate datacom needs. Nonlinear silicon photonics is an allied area that deals with the
use of silicon as a nonlinear optical material to realize light amplification, wavelength conversion,
frequency mixing etc., for optical communication applications. In this talk I will give an overview
of nonlinear silicon photonics and some of the different active photonic functionalities that have
been realized by various groups around the world. Next, some of the research work from my
group on dispersion engineering silicon waveguides to achieve enhanced optical pulse
compression and super-continuum generation will be discussed. The applications of pulse
compression to optical time domain multiplexing (OTDM) systems and super-continuum to
spectrally agile light sources will also be discussed.
Biosketch
Varun Raghunathan received his Ph.D. in Electrical Engineering from University of California
Los Angles (UCLA), in 2008, working with in the area of Silicon photonics. Then he worked at
Ostendo Technologies, a start-up company based out of San Diego, CA USA in the area of III-
Nitride LED arrays for pico-projector applications until 2009. He later worked as a postdoctoral
researcher at the Chemistry department at University of California Irvine from 2009-2012 in the
area of nonlinear optical microscopy. From 2012-2016 he worked as a research scientist at
Agilent Research labs in Santa Clara, CA USA working on laser based infrared microscopy,
developing optical imaging techniques for anatomic pathology and its clinical translation.
He joined IISc as an Assistant Professor in 2016. His research interests are in integrated
photonics for applications in nonlinear optics and spectroscopy and nonlinear microscopy. He
has published over 20 journal papers with more than 2000 citations, 5 book chapters and 6
applied patents. He received the Best PhD award in 2008 for his doctoral thesis work from the
Electrical Engineering department at UCLA.
14
Keynote Address-5 Wireless Optical Communication
Dr. D. Sriram Kumar, Professor & Head, Department of ECE, NIT-Trichy
Free-space optics (FSO) communication has attractive features compared to radio-
frequency (RF) communication which includes cost-effectiveness, high data rate, simple
deployment, high security, license–free operation and free from interference. Due to the
inherent features, the FSO has recently received significant attention and commercial
interest for various applications including last mile network connectivity, fiber optic back-up,
cellular backhaul and temporary connectivity for applications such as voice and data, video
services and medical imaging. However, the link range, reliability and data rate of FSO
communication systems are affected by various atmospheric phenomena viz. rain, haze, fog,
snow, scintillation, and pointing errors. The major challenges in FSO communications are the
atmospheric turbulences induced fading and misalignment induced fading. That is FSO links
suffer from atmospheric turbulences and pointing errors.
Visible light communication is the indoor and outdoor wireless optical communication using
visible light spectrum. The application of VLC is enormous in recent days. Particularly it is
focused more towards automobile and medical applications.
The complete talk is going to introduce FSO and VLC in recent applications.
Biosketch
Dr. Sriram Kumar has graduated from Thiagarajar College of Engineering, Madurai, with B.E.
in in Electronics and Communication Engineering in 1991. He did his M.E. from Alagappa
Chettiar College of Engineering and Technology, Karaikudi in 1993. Later on, he completed his
Ph.D. on Microwave Integrated Circuits in 2009 from Bharathidasan University, Tiruchirappalli.
Currently, he is the HOD in the ECE department at National Institute of Technology
Tiruchirappalli.
Dr. Sriram Kumar has been active in the research field since 2010 and has major research
interests in the areas of Microwave integrated circuits, Carbon Nanotube Antennas, Smart
Antennas, Flexible electronics, Free Space Optics and Optical Networks His overall research
work has got 174 citations with h-index of 8. His research paper entitled: “Graphene nano-
ribbon based terahertz antenna on polyimide substrate” has got the highest number of citations,
till date.
Besides this, he is a member of Institution of Engineers, Society of Automotive Engineers,
IETE and ISTE. Furthermore, he is involved in MHRD funded research project on RF MEMS
Component (Reconfigurable antenna). Besides this, he is a member in the Centre of Excellence
(CoE) in (i) Electronic packaging, (ii) Smart structures, and (iii) Social network computing, and
Secretary and Treasurer of ISTE-NITT chapter.
15
Technical Talk-1 Introduction to Converged Packet-Optical SDN
Mr. Ruturaj Kadikar, Senior Research Associate, CSE, SRM University
Demand for bandwidth has continued to grow dramatically driven by video, cloud, and data
center interconnect. In addition, mobile backhaul has migrated from TDM and ATM to
Ethernet and IP interfaces with backhaul speeds set to evolve from 1 Gbps per cell site with 4G
to 10 Gbps per cell site with 5G. These trends are driving network operators to complement
WDM optical transport with packet transport technology, primarily in the metro and more
recently in long haul networks. These trends include the demand for more bandwidth and greater
agility with key applications including Ethernet and cloud connect services, fixed broadband
aggregation, mobile backhaul, and SONET/SDH migration.
While the cases for both packet transport and WDM technologies are compelling, there is
constant need for developing and deploying converged platforms that integrate both
technologies into a single network element as an alternative to independent platforms. A
converged packet optical platform is one that at a minimum integrates packet transport switching
technology with full featured WDM interfaces and a WDM optical layer including ROADM
technology. The key benefits achieved by this convergence includes reduced CapEx, reduced
OpEx, and the potential for increased revenues through faster installation and provisioning.
Agility has also become a key enabler of competitiveness with faster service development,
installation, and service provisioning all key requirements. Network management has also
evolved with Software-defined networking (SDN) providing an architecture for multi-domain,
multi-layer control with open APIs enabling new services and new levels of agility. SDN is an
umbrella term consisting of several kinds of network technologies incorporated together to make
the network as agile and flexible as possible enabling quicker response to the changing business
and technical requirements.
Open Network Operating System (ONOS) is an open source project providing a multi-layer
control plane for a Software-Defined Network thereby simplifying the management,
configuration, and deployment of new softwares, hardwares and services. ONOS can also run
as a distributed system across multiple systems, allowing it to use the processor and memory
resources of multiple systems while providing fault tolerance in case of system failure without
interrupting traffic.
Service Provider Networks are complex and multi-layer in nature. Each of these layers, including
packet and optical, is provisioned and managed independently. Often times, the provisioning of
capacity or new services can take weeks if not months. A converged SDN control plane for
packet and optical networks can help address these inefficiencies. Service providers can optimize
across both the packet and optical layers in real-time for availability and economics, thereby
reducing over-provisioning. Operators can add capacity based on traffic and other
considerations in minutes instead of days or months.
ONOS is purposely built for service providers who typically operate large and complex multi-
layer networks. ONOS has native support for the most common type of multi-layer network,
namely the packet/optical network. It does so by offering an innovative converged topology
view, allowing rapid introduction of new services and unprecedented optimization in an
environment which has been dominated by a legacy mindset.
16
References
1. https://onosproject.org
2. www.coriant.com
Biosketch
Ruturaj Kadikar received the M.Tech degree in Communication Systems from SRM University,
Chennai, India, in 2016. Currently, he is working as Senior Research Associate in Software
Defined Communications Research/Testbed Lab, Dept. of Computer Science Engineering,
SRM University. His research interests include, Software-Defined Optical Networks, Software-
Defined Networks and Cloud Networking.
Technical Talk-2 Free Space Optics: An Opportunity to Move Beyond Radio
Mr. Rahul Bosu, Research Scholar, ECE, SRM University
Free-space optical communication (FSOC) networks make use of free space as a transmission
medium to deliver optical data signals at high bit rates. FSOC systems using lasers offer the
promise of breaking through the RF bottleneck faced in the ubiquitous wireless networks. Laser
transmitters, at wavelengths some 10,000 times shorter than RF waves, result in beams that are
far narrower for the same unit aperture size—providing more concentrated communications
power at the receiver with lower required transmitted power from smaller, lighter apertures.
Right from the start of 1960s, the NASA plunged itself in deep space wireless optical
communication project for implementing a deep space optical transceiver and ground receiver
that will enable greater than 10 times the data rate of a state-of-the-art deep space RF system
(Ka-band) for similar spacecraft mass and power [1]. The European Space Agency (ESA) started
funding various FSO projects since the summer of 1977, aiming to develop high-data-rate laser
links in space. NASA demonstrated its first laser communication system in space in 2013, with
the Lunar Laser Communications Demonstration (LLCD) [2] mission, aboard the Lunar
Atmosphere Dust and Environment Explorer (LADEE). LLCD demonstrated error-free data
downlink rates of up to 622 Mb/s from the moon at a distance of some 400,000 km. More
recently, the researchers at the German Aerospace Center demonstrated terrestrial FSO data
transmissions at 1.72 terabits per second across a distance of 10.45 km [3].
With the leaps and bound increase in number of mobile devices, wireless communication
services are now indispensable to many people just like water and electricity supplies. The recent
developments in the optics and communication devices, has rejuvenated an interest in analyzing
and enhancing wireless optical links and adopting FSO technology for wireless access networks.
The FSO network could become a viable candidate for use in the broadband wireless networks
of the next generation as there exists commercial transceivers that support Gbps data rates.
FSO networks are roughly classified into three types [3]: (i) Optical Wireless Terrestrial Networks
(OWTNs), (ii) Optical Wireless Home Networks (OWHNs), and (iii) Optical Wireless Satellite
Networks (OWSNs), according to the locations of optical transmitters and receivers and
network range. OWTNs, a.k.a., “the outdoor FSO networks” are effective solutions for the
“last-mile” or “first-mile“ problems and can be incorporated for disaster recovery scenarios as
the communication assets can be quickly deployed with ease. This telecommunication paradigm
17
is extensively used to bridge existing high-data-rate networks, especially for ship-to-ship,
building-to-building, or community-to-community communications.
OWHNs, also known as indoor FSO networks, are desirable for constructing a LAN comprised
of multiple cells. Usually each cell is one of the divided spaces in the building and has a base
station to which several terminals are connected with short-range optical wireless links such as
infrared and light emitting diodes (LEDs). The optical sources with the same specifications can
be reused in different rooms of the same building since light beams cannot penetrate walls,
resulting in negligible mutual interference.
OWSNs are designed to provide high-bandwidth optical wireless network access to end-users
by making use of satellites that can support any terrestrial residents regardless of topographical
limitations. However, the extremely narrow divergence of the beams introduces challenges for
their pointing, acquisition and tracking across the vast distances of space. In lieu of this, and the
ground breaking success of (LLCD) mission has encouraged the NASA to team up programs
for developing a prototype unit fully ground-tested to space environmental levels, as a precursor
to flight of a working laser communication system on the upcoming Discovery mission
scheduled for 2020. If the promise of integrated photonics can truly be realized to drive the costs
of FSOC to well below those of RF systems, then commercial networks of “fiber-in-the-sky”
may soon follow, and lead to yet another communications revolution in the very near future.
Biosketch
Rahul Bosu is currently a research scholar in the department of ECE, SRM University and is
pursuing research in the area of wireless optics since 2014. His research interests include: optical
fiber communication,free-space optics and statistical optics.
References
1. NASA, Deep Space Optical Communications (DSOC), 2016, [online].
⟨https://gameon.nasa.gov/projects/deep-space-optical-communications-dsoc/⟩. 2. https://www.osa-opn.org/home/articles/volume_27/may_2016/features/space-
based_laser_communications_break_threshold
3. I.K. Son, and S. Mao, “A survey of free space optical networks,” Digital
Communications and Networks, 3 (2017), pp.67–77.
Technical Talk-3 Challenges of Optical Network and Opportunities in India
Mr. Vivek Kachhatiya, Research Scholar, ECE, SRM University
The global IP traffic and global mobile data traffic are expected to increase three-fold and eleven-
fold respectively from 2013 to 2018 as per the cisco statistics. Hence, in order to meet the rapidly
growing bandwidth requirements for high-speed data transmission and the constant exponential
need for even greater connectivity of consumer applications, it is necessary to further upgrade
the optical network. Digital population in India as of January 2017 is nearly 46 crore users (460
Million users). India is the second largest online market, ranked only behind China. By 2021,
18
there will be about 635.8 million internet users in India. So understanding the challenges of
optical network is vital for Indian engineers to grab emerging opportunities in India.
The optical network is classified as the core network, metro network, and access network. In
some scenarios depending on the location and terrain condition, services of core and metro
network are merged together and metro and access network are merged together. Challenges in
optical signal propagation/ deployment of the optical fiber are common for all three classified
optical networks. Impairments in optical transmitter and receiver also plays a vital role to provide
error-free performance of the optical network.
Some challenges are particular for a given network and need a technical and engineering
assistance to enable the services. Following are the challenges involved in core network that need
to be understood and resolved. End-to-end Ethernet, Mixed-line-rate network design, Dynamic
optical circuit switching, Hybrid dynamic circuit/packet switched network, Robust network
design, Excess capacity management, Energy-efficient network design, Data-center network
design, Broadband access network design.
Metro network requires special attention on, Gridless/Elastic Networking, Sleep-Mode for
Energy Efficiency, Space Division Multiplexing, Software Defined Networking, Mixed-Line-
Rate Networks. The access network is all about providing a reliable connection to the users,
providing high throughput and a wide range of services.
The Indian government approved a cabinet note on the scheme to create the National Optical
Fiber Network (NOFN) dated 25 October 2011. The implementation framework, budget,
technology architecture and other issues related to NOFN were worked out by the Department
of Telecom (DoT) under the chairmanship of an adviser to the Prime Minister and Chairman
UIDAI (constituted on 26 April 2011). The Special-Purpose Vehicle Bharat Broadband Network
Limited (BBNL) was incorporated to execute the project, implemented by three prominent
Public Sector Undertakings (PSUs), namely BSNL, RailTel, and Power Grid.
A committee constituted in January 2015 reviewed the earlier project (NOFN) and proposed a
modified project called BharatNet, in a report submitted on 31 March 2015. The project was
rolled out as a collaboration between the Union Government (to provide broadband
connectivity at sub-district Block-level), state governments (optical fiber to gram panchayat level)
and private sector companies (wifi hotspots in each village and connections to the individual
homes). The revision (BharatNet) included almost three times the fiber length, a mix of
infrastructure technologies, at twice the capex but with a significantly reduced opex, so that it
works out to be a lower total project lifecycle cost. NOFN had not incorporated any revenue
model but in BharatNet, content provisioning for the end user is envisaged by different
competitive private service providers (PSPs). This reduces opex, where it has been assumed that
75% of the costs would be recovered through auction revenue.
BioSketch
Vivek Kachhatiya received the M.Tech. degree in Communication System from from SRM
University, India, in 2014. Presently he is a Research scholar in the Department of Electronics
and Communication Engineering, SRM University, India. His research interests include Passive
Optical Network, Radio Over Fiber, Next Generation Unified all Optical Architecture and
Software Defined Optical Network. He has published articles in recognized international
conference and journal.
19
THE FINITE-DIFFERENCE TIME-DOMAIN (FDTD)
Introduction
The Finite-Difference Time-Domain (FDTD) method 1,2,3 is a state-of-the-art method for
solving Maxwell's equations in complex geometries. Being a direct time and space solution, it
offers the user a unique insight into all types of problems in electromagnetics and photonics. In
addition, FDTD can also obtain the frequency solution by exploiting Fourier transforms, thus a
full range of useful quantities can be calculated, such as the complex Poynting vector and the
transmission / reflection of light.
Solver physics
This section will introduce the basic mathematical and physics formalism behind the FDTD
algorithm. FDTD solves Maxwell's curl equations in non-magnetic materials:
where H, E, and D are the magnetic, electric, and displacement fields, respectively, while
is the complex relative dielectric constant ( , where n is the refractive index).
In three dimensions, Maxwell equations have six electromagnetic field components: Ex, Ey, Ez
and Hx, Hy, and Hz. If we assume that the structure is infinite in the z dimension and that the
fields are independent of z, specifically that
then Maxwell's equations split into two independent sets of equations composed of three vector
quantities each which can be solved in the x-y plane only. These are termed the TE (transverse
electric), and TM (transverse magnetic) equations. We can solve both sets of equations with the
following components:
TE: Ex, Ey, Hz
TM: Hx, Hy, Ez
For example, in the TM case, Maxwell's equations reduce to:
20
The FDTD method solves these equations on a discrete spatial and temporal grid. Each field
component is solved at a slightly different location within the grid cell (Yee cell), as shown below.
By default, data collected from the FDTD solver is automatically interpolated to the origin of
each grid point, so the end user does not have to deal with this issue in their analysis.
Dispersive materials with tabulated refractive index (n,k) data as a function of wavelength can
be incorporated by using the multi-coefficient material models that automatically generates a
material model based on the tabulated data. Alternatively, specific models such as Plasma
(Drude), Debye or Lorentz can be used. The FDTD solver supports a range of boundary
conditions, such as PML, periodic, and Bloch. The FDTD solver supports a number of different
types of sources such as point dipoles, beams, plane waves, a total-field scattered-field (TFSF)
source, a guided-mode source for integrated optical components, and an imported source to
interface with external photonic design software.
Meshing
FDTD Solutions uses a rectangular, Cartesian style mesh, like the one shown in the following
screenshot. It's important to understand that of the fundamental simulation quantities (material
properties and geometrical information, electric and magnetic fields) are calculated at each mesh
point. Obviously, using a smaller mesh allows for a more accurate representation of the device,
but at a substantial cost. As the mesh becomes smaller, the simulation time and memory
requirements will increase. The FDTD solver provides a number of features, including the
conformal mesh algorithm that allow you to obtain accurate results, even when using a relatively
coarse mesh.
By default, the simulation mesh is automatically generated. To maintain accuracy, the meshing
algorithm will create a smaller mesh in high index (to maintain a constant number of mesh points
per wavelength) and highly absorbing (resolve penetration depths) materials. In some cases, it
is also necessary to manually add additional meshing constraints. Usually, this involves forcing
the mesh to be smaller near complex structures (often metal) where the fields are changing very
rapidly.
21
Integrating over lines, surfaces and volumes
The electric and magnetic fields are recorded on the finite-difference mesh, as shown below for
a 2D monitor, where the grey dots represent the positions where the fields are recorded. The
thick black outline shows the limits of the surface monitor as seen in the Layout Editor. This
monitor has an x-span of 12dx and a y-span of 5dy. This monitor records a total of 13x6 data
points.
A typical calculation with this monitor might be to integrate the total power flow across the
surface of the monitor, or
In order to calculate this quantity, we provide the scripting function integrate. If Pz is a variable
of dimension 13x6x1, and x and y are the corresponding position vectors, then the desired
quantity is:
power = 0.5*integrate(real(Pz),1:2,x,y);
The integrate script command can be used to integrate over spatial dimensions even when several
frequency points have been recorded. For example, if Pz is a variable of dimension 13x6x1x10,
representing 10 frequency points, then the following can be used to integrate over y (ie
dimension 2) and then x (ie dimension 1)
power = 0.5*integrate(real(Pz),1:2,x,y);
power will be a matrix of dimension 10x1.
References
1. https://kb.lumerical.com/en/index.html?solvers_finite_difference_time_domain.html
2. Dennis M. Sullivan, Electromagnetic simulation using the FDTD method. New York:
IEEE Press Series, (2000).
3. Allen Taflove, Computational Electromagnetics: The Finite-Difference Time-Domain
Method. Boston: Artech House, (2005).
4. Stephen D. Gedney, Introduction to the Finite-Difference Time-Domain (FDTD)
Method for Electromagnetics. Morgan & Claypool publishers, (2011).
22
COMPREHENSIVE DESIGN ENVIRONMENT FOR OPTICAL COMPONENTS, SYSTEMS, AND NETWORKS
I. OPTSIM PRODUCT OVERVIEW
RSoft OptSim™ is an award-winning software tool for the design and simulation of optical
communication systems at the signal propagation level. With state-of-the-art simulation
techniques, an easy-to-use graphical user interface and lab-like measurement instruments,
OptSim provides unmatched accuracy and usability. The software has been commercially
available since 1998 and is in use by leading engineers in both academic and industrial
organizations worldwide.
Layout of a 111 Gbps dual-polarized QPSK system with coherent reception
Benefits
• Virtual prototyping of optical communication systems for increased productivity and
reduced time to market.
• Design optimization for enhanced performance and reduced costs.
• Interfaces with third-party tools such as MATLAB and the Luna Optical Vector Analyzer.
• Advanced electrical modeling with embedded SPICE engine.
Applications
OptSim is ideally suited for computer-aided design of optical communication systems including,
but not limited to:
• Coherent optical communication systems, such as PM-QPSK, PM-BPSK, PM-QAM,
OFDM
• Advanced modulation formats, such as D(Q)PSK, Duobinary, BPSK, m-PAM, m-QAM,
etc.
• DWDM/CWDM system with optical amplification, such as EDFA, Raman, SOA, OPA
• FTTx/PON, including BPON, G(E)PON, WDM-PON, coherent PON, RSOA-based bi-
directional PON
• Analog and digital CATV, radio-over-fiber, and microwave photonic links
• OCDMA/OTDM
• Electronic Dispersion Compensation (EDC)
23
• Interferometric Fiber Optic Gyroscope (iFoG)
• Free Space Optics (FSO)
• Optical interconnects
• Soliton transmission
Features
• Support for multiple parameter-scans-based optimization.
• Only design tool with multiple engines implementing both the Time Domain Split Step
and the Frequency Domain Split Step for the most accurate and efficient simulation of
any optical link architecture.
• MATLAB interface makes it easy to develop custom user models using the m-file
language and/or the Simulink modeling environment.
• Interfaces with laboratory test equipment such as Agilent and Luna to merge simulation
with experiment.
• Interfaces with device-level design tools such as BeamPROP and LaserMOD provide a
powerful mixed-level design flow for optoelectronic circuits and systems.
• Co-simulation with embedded SPICE engine, and interfaces with EDA tools such as
Synopsys HSPICE for a mixed-domain electrical and optical simulation.
• Application Programming Interface (API) for programming languages such as C/C++
for the development of custom user models.
• Best Fit Laser Toolkit™ makes customizing powerful rate-equation laser model
parameters to fit desired performance characteristics easily.
• Extensive library of predefined manufacturer components makes it easy to model
commercially available devices.
• Intuitive and flexible measurement post-processing graphical interface acts like a virtual
laboratory instrument.
Reference
https://www.synopsys.com/optical-solutions/rsoft/system-network-optsim.html
II. OPTSIM CIRCUIT PRODUCT OVERVIEW
OptSim Circuit provides an ideal platform for modeling optical systems and PICs that operate
with coupling and feedback of different optical and electrical signal paths. The graphical user
interface (GUI) stored with our award-winning OptSim tool offers a more natural user
experience to test and optimize performance of PICs at the system level.
24
Foundry PDK-based schematic in OptSim Circuit to generation of mask for fabrication
OptSim Circuit comes with a rich library of PIC elements including, but not limited to,
bidirectional waveguides, bidirectional couplers and connectors, modulators, optical sources
(lasers and VCSEL), and photodiodes (PIN and APD). Measurement and plotting tools are
supplied, such as optical and electrical scopes, signal, spectrum and eye diagram analyzers, Q-
factor and BER estimators, power meters, etc. OptSim Circuit's intuitive representation of
repeating and hierarchical elements provides brevity and efficiency to the layouts. For example,
you can create custom components and organize and reuse them in the PIC layout.
Estimating performance bounds in OptSim Circuit due to wafer-to-wafer (WTW) and run-to-run (RTR)
foundry process variations
OptSim Circuit takes into account bidirectional propagation of both optical and electrical signals.
This makes it possible to model complex signal interactions such as reflections and resonance in
PICs that otherwise are impossible to model in conventional systems modeling tools.
25
OptSim Circuit's extensive documentation includes an installation guide, user guide, models
reference guide and application notes. The product also includes a number of pre-supplied PIC
layouts such as single- and multi-stage micro-ring resonators, a micro-ring modulator, a gratings-
based optical notch filter, and more.
Benefits
• Offers a comprehensive pathway to PIC ecosystems, starting from the development of
concepts to foundry PDK-based schematics, and leading to the creation of masks ready
for fabrication
• Provides a unified platform to evaluate and optimize the impact of PIC performance on
the overall system when used with the OptSim tool
• Delivers powerful options for design setup, data visualization, plotting and management
of project resources
Applications
• Single- and multi-stage Photonic Integrated Circuits (PICs)
• Silicon photonics
• Transceivers for coherent and non-coherent fiber optic communication systems
• Photonic systems with multipath interference (MPI), reflections and resonances
• Ring resonators, ring modulators, traveling-wave Mach-Zehnder modulators (TW-
MZM), optical filters
• Photonic sensor circuits
Features
• Extends OptSim’s system modeling capabilities to include PICs
• Models bidirectional propagation for both optical and electrical signals
• Models forward and backward propagating reflections and resonance
• Models single- and multi-stage bidirectional PICs
• Models multipath Interference (MPI) from network and PIC elements
• Includes library of PIC elements such as bidirectional waveguides, bidirectional couplers
and connectors, light sources, modulators and photo diodes
• Includes a library of PDK elements for the commercial IMEC foundry
• Supports mask layout via an interface to Luceda IPKISS
• Supports reusable user-defined components and compound components
• Offers flexibility to create custom models using MATLAB cosimulations
• Provides a number of options for exporting data and for co-simulation with external tools
• Provides an intuitive graphical user interface
• Comes with powerful options for data visualization, plotting and management of project
resources
Reference
https://www.synopsys.com/optical-solutions/rsoft/optsim-circuit.html
III. Hands-on Practice
1. Introduction to OptSIM V2017 – Twin Simulation Engine
2. Introduction to Block Mode simulation Engine
3. Block Mode:
• Design & Simulation of simple optical communication system
• Parameter sweep while simulation
26
• Creation of compound system in Block Mode.
• Use of HOC feature in Block Mode
• Design of Optical communication system design such as FSO, Radio over fiber,
PON, FTTH etc
4. Sample Mode:
• Introduction to OptSIM – Sample Mode
• Introduction to Sample Mode simulation Engine
• Design & Simulation of Optical communication system in Sample mode
• Integration of Matlab with OptSIM
• Integration of SPICE with OptSIM
• Features of Best Fit Laser tool kit
• Integration of RSoft Component Design Suite + OptSIM
5. Introduction to OptSIM Circuit
6. Design and integration of PIC in OptSIM using OptSIM circuit
Trainer
Mr. Arul Prakash, Product Engineer, Supreme Scientific Corporation, Madurai
CROSS WORD PUZZLE Rohan Katti, Research Scholar, Department of ECE
27
Across
2 A type of cable consist of a single tightly buffered fiber
4 A device that measures the scattered reflected light returning from the pulse of
transmitted light
5 What mode is used for long haul telecommunications
6 The portion that contains fiber optic transmission wavelengths
7 Unit that is use to measure power readings in optical fibers
9 When an atom has only one electron, it is a perfect?
11 One kind of cable consisting of electrical conductors and fiber
13 Composed of 12 fibers held together by a plastic tape
14 The fundamental unit of light and electromagnetic energy
15 When the light bounces off a medium, it is called
18 The process that includes quantizing, sampling and encoding
19 Cable containing Single mode and Multi mode fibers
20 It is the bending of light through the intersection of two medium
21 There are two most common types of light source used in fiber optic communication,
one is laser diode and the one is?
25 The distance light travels to complete one cycle is called
28 Standard color for 62.5/125nm fiber cordage
29 It is the fiber optic communication common method of mudulation
30 Short for Synchronous Optical Network
Down
1 How many different fibers does the standard fiber color codes accounts for
3 A device that converts a voice or data into a transmittable form
5 Cables that can handle high pressure and moisture associated with great depths
8 Fiber connector still being used on older systems
10 A non-breakout, tight buffered and used indoor is called
12 Reference guide that should always be available whenever chemicals and solvents are
being used for splicing
16 The three components of optical fibers are core, jacket and
17 An atom that has eight valence electrons is a good
22 Cables used inside buildings and fire resistant are called
23 An analog sample rate must be atleast two times the highest frequency is called ____
sampling criteria
24 Standard color for 8.3/125nm fiber cordage
26 A coupler that provides no insertion loss
27 Cable ratings OFNG and OFCG, the G stands for
28
Article-1 CORD at a glance
Ruturaj Kadikar, Senior Research Associate, Department of CSE, SRM University
CORD Architecture
CORD (Central Office Re-architected as a Data-Center) combines NFV, SDN, and the elasticity
of commodity clouds to bring datacenter economics and cloud agility to the Telco Central
Office. An open reference implementation of CORD uses commodity servers and white-box
switches, coupled with open source software that includes OpenStack, Docker, ONOS, and
XOS.
• Openstack provides a base IaaS capability, and is responsible for creating and
provisioning virtual machines (VMs) and virtual networks (VNs). CORD uses
OpenStack's Nova, Neutron, Keystone, Ceilometer and Glance subsystems.
• ONOS is the network operating system that manages the white-box switches and
software switches (OvS) in each server. It hosts control programs that implement
services and it is responsible for embedding virtual networks in the underlying network.
• XOS is a framework for assembling and composing services. It unifies data plane
services supported by OpenStack and Docker, and the control plane services running on
ONOS.
The CORD Technical Steering Team (TST) has established the following projects under the
CORD umbrella. Each has it's own community, roadmap, and software components, but they
all come together into an integrated whole for each release of the CORD reference
implementation.
• Residential CORD (R-CORD)
• Enterprise CORD (E-CORD)
• Mobile CORD (M-CORD)
• Analytics for CORD (A-CORD)
• Trellis: CORD Network Infrastructure
• XOS: The CORD Controller
• VOLTHA: Virtual OLT Hardware Abstraction
Residential CORD (R-CORD) includes services that leverage wireline access technologies like
GPON, G.Fast, 10GPON, and DOCSIS. The initial release includes a disaggregated and
virtualized OLT device for GPON, called vOLT. R-CORD also includes a virtual Subscriber
29
Gateway (vSG) and leverages a core networking service - virtual Router (vRouter); the former is
implemented by a container that is bound to each subscriber and the latter is an ONOS control
application. Design notes for each can be found here:
• Virtual OLT (vOLT)
• Virtual Subscriber Gateway (vSG)
• Virtual Router (vRouter)
E-CORD builds on the CORD infrastructure to support enterprise customers, and allows
service providers to offer enterprise connectivity services (L2 and L3VPN). It can go far beyond
these simple connectivity services, as it includes virtual network functions (VNFs) and service
composition capabilities to support disruptive cloud-based enterprise services.
In turn, enterprise customers can use E-CORD to rapidly create on-demand networks between
any number of endpoints or company branches. These networks are dynamically configurable,
implying connection attributes and SLAs can be specified and provisioned on the fly.
Furthermore, enterprise customers may choose to run network functions such as firewalls, WAN
accelerators, traffic analytic tools, virtual routers, etc. as on-demand services that are provisioned
and maintained inside the service provider network.
M-CORD is an open source reference solution built on the pillars of SDN, NFV and cloud
technologies. It leverages open source software, disaggregationand virtualization of RAN and
core functions of mobile wireless networks. M-CORD enables mobile edge applications and in
novative services using micro-services architecture.
Key features of A-CORD
• Provides deep observability of both physical network elements and software element inside CORD: Dis-aggregated access devices (GPON OLT), dis-aggregated core devices (ROADMs), Fabric whitebox switches, Compute/Storage hardware, Software virtual switches (OVS), Software virtualized services running on the infrastructure
• Provides not only infrastructure level monitoring but also service level monitoring thereby enables end-to-end observability
• Programmatic interfaces to control level of observability • Decouples Analytics applications from underlying probes thereby enabling true multi-
vendor environments • Allow multiple applications to consume the same collected data. i.e. collect once and use by
many • Applications can be data publishers too such that aggregated events can be fed into the
system that can be consumed by other applications
Trellis is a unique combination of an underlay leaf-spine fabric, overlay virtual networking and
unified SDN control over both underlay and overlay. In the current implementation, there are
actually two sets of ONOS controllers with different responsibilities. The first ONOS cluster
(onos-cord) is responsible for the overlay infrastructure (virtual networking and service
composition) and the access infrastructure. This cluster hosts the VTN and vOLT applications,
respectively.
The second ONOS cluster (onos-fabric) is responsible for controlling the fabric and interfacing
with conventional upstream routers. This cluster hosts the Fabric Control and vRouter
applications, respectively.
30
XOS brings the Everything-as-a-Service (XaaS) organizing principle to the CORD architecture.
In doing so, it addresses several of CORD's high-level design requirements, including a means
to seamlessly integrate control plane (SDN) and data plane (NFV) based services; the ability to
support both access services and conventional cloud services; support for multiple security
domains; and the "end-to-end glue" needed to make CORD both extensible and controllable.
VOLTHA introduces the next-generation optical access system architecture, based on
SDN/NFV technologies. Disaggregating PON functions to functional modules with open
interfaces supports the CORD vision for open source reference implementations to service
"Access-as-a-Service" use cases. VOLTHA is a vOLT hardware abstraction component that
supports the CORD Project objective of multi-vendor, multi-domain "any broadband access as
a service" reference implementation for the Central Office. VOLTHA provides isolation
between an abstract (vendor agnostic) PON management system, and a set of vendor-specific
PON hardware devices. On its north-bound interface, VOLTHA provides a set of abstract APIs
which north-bound systems can interact with the PON networks. On its south-bound side,
VOLTHA communicates with PON hardware devices using vendor-specific protocols and
protocol extensions through adapters.
Reference
https://wiki.opencord.org
Article-2 Finally, SDN's Time Come for Optical Network
Vivek Kachhatiya, Research Scholar, Department of ECE, SRM University
The optical system's market has been shockingly and surprisingly progressed in the recent years
because of the rise of programmable optical modules by utilizing digital signal processors (DSPs)
capable of modulating the data in multiple modulation schemes and also delivers the high data
rate link in flexible combinations of reach and capacity. The optical line card adopted DSPs only
for two significant reasons, first it inexpensive when compared with another component, in fact,
DSP is a relatively cheaper component of the complete line card. Second, it enables re-
configurability and reusability of the expensive optical modules and radio frequency (RF)
components.
The industry is looking forward to time, the principles and standards of programmability of
optical line cards apply to the broad area of the optical network. The programmability is an
essential element of intelligent optical communication systems across most applications. As
service provider/ operator/ administrators converged their fixed and mobile access networks
and centralized (cloudify) their radio access systems (RANs), such programmability will be
significant to provide multiple services, flexible services and dynamic/ adaptable data rate for
broad/ various user application or demands. So absolutely DSP can be deployed for an access
network segment, metro network as well as long-haul applications. As the mobility and data rate
of the electronic gadgets increases, FEC algorithms enhances and systems capacity and reach
capability increases.
It is all extremely well-having adaptability and programmability at the line card level, but there is
an issue to be managed before this can happen and the problem is management and
administration of new optical network since traditionally static optical networks management
31
approach cannot enable us to the most efficient utilization of optical resources. Next-Generation
optical networking management and administration demand the orchestration and software-
defined networking (SDN) approaches that have been making a significant impact on the areas
of optical carriers, network operation and stretches out it reach up to the optical transport
network regarding administrative process management and system management. Some vendors
are reacting to this with the presentation of new management systems and administrative
frameworks that provide the more excellent visibility of the optical network that will be needed
to empower more powerful and computerized administration, expected to enable more dynamic
and automated management. The management system, an administration framework, and
programming applications that guarantee real-time visibility into network performance, organize
execution, less demanding wavelength provisioning, and more prominent computerization, as
well as higher automation - like path restoration, are needed. Currently, the management system
has open application programming interfaces (APIs) and standard data models to tailor the
demand of service provider as well as expand in future.
In a parallel vein, pulling optical performance data from the network (including from coherent
receivers) and analyses it in real time with any appropriate Processing Engine to survey the signal
quality parameter per channel is another approach of empowering faster and less complicated
wavelength provisioning. It is expected to see different vendors patching up their management
systems and administration frameworks along similar lines within a couple of months from each
other. For an, e.g., Ciena's Liquid Spectrum approach, introduced in March 2017, encompasses
a management system (Blue Planet MCP). In a parallel vein, Coriant's Aware system
demonstrated in March 2017.
The Heavy Reading report Telco Optical Systems Beyond 100G, takes an overview of change
in the demand for optical transport, development of coherent optics and what is the future of
this evolving dynamic technology along with presently established technology. It analyzes the
electronic devices (gadgets) concerning high speed and high data rate capability and
comprehends the results for the standard optical network spacing. Further, it also analyzes the
methodologies and portfolios of 11 vendors of telco-centered optical systems. It also provides
standardization efforts from both user side as well as service provider side.
Article-3 Do you know?
Rohan Katti, Research Scholar, Department of ECE, SRM University
• The sun is actually white when seen from space, because its light is not scattered by our atmosphere. From Venus, we wouldn’t see the sun at all, because the atmosphere is too thick.
• In a double rainbow, light is reflected twice inside each water droplet and the colours in the outer arc appear in the reverse order.
• Some animals can see light which we cannot, bees can see ultraviolet light, pit vipers can see infrared.
• Light has momentum, researchers are developing ways to harness that energy to power space travel.
• Frogs eyes are so sensitive to to light that researchers in Singapore have used them to
32
develop, extremely precise photon detectors.
• Despite the name, black holes are the brightest objects in the universe, even though we cannot see past the event horizon, they can generate more energy than the galaxies in which they are housed.
• Light can make some people sneeze – photic sneeze reflex.
• A perfectly monochromatic light beam is always perfectly polarized but a perfectly polarized beam does not have to be perfectly monochromatic
• If a photon has a watch on its hand, it will always see it not ticking.
• Despite some lasers being hotter than the surface of the sun, they can be used to cool atoms when combined with a magnetic field.
• Humans are bioluminescent. However, the light emitted by our body is 1000 times weaker than our eyes can pick up.
• A ‘jiffy’ is an actual unit of time. It is the time it takes for light to travel one cm in a vacuum, which is about 33.3564 picoseconds.
• The world’s longest lasting light bulb in California has been burning since 1901, with a few interruptions during power failures.
Article-4 Bio-Organic Optoelectronic Devices using DNA
S. Diana Emerald Aasha
Introduction
Biomolecular DNA, as a marine waste product from salmon processing, has been exploited as
biodegradable polymeric material for photonics and electronics. For preparing high optical
quality thin films of DNA, a method using DNA with cationic surfactants such as DNA–
CetylTriMethylAmmonium, CTMA has been applied. This process enhances solubility and
processing for thin film fabrication. These DNA–CTMA complexes resulted in the formation
of self-assembled supramolecular films. Additionally, the molecular weight can be tailored to suit
the application through sonication. It revealed that DNA–CTMA complexes were thermostable
up to 230◦C. UV–VIS absorption shows that these thin films have high transparency from 350
to about 1,700 nm. Due to its nature of large band gap and large dielectric constant, thin films
of DNA–CTMA has been successfully used in multiple applications such as organic light
emitting diodes (OLED), a cladding and host material in nonlinear optical devices, and organic
field-effect transistors (OFET).
Using this DNA based biopolymers as a gate dielectric layer, OFET devices are fabricated that
exhibits current–voltage characteristics with low voltages as compared with using other polymer-
based dielectrics. Using a thin film of DNA–CTMA based biopolymer as the gate insulator and
pentacene as the organic semiconductor, it has been demonstrated that a bio-organic FET or
BioFET in which the current can be modulated over three orders of magnitude using gate
voltages less than 10 V. Given the possibility to functionalise the DNA film customised for
specific purposes viz. biosensing, DNA–CTMA with its unique structural, optical and electronic
properties results in many applications that are extremely interesting.
33
DNA–CTMA as Optoelectronic Material The DNA used for research in optoelectronic devices
is purified DNA. The starting point is marine-based DNA, which is first isolated from frozen
salmon milt and roe sacs through a homogenisation process. It then went through an enzymatic
treatment to degrade the proteins by protease. Resulting freeze dried purified DNA has
molecular weight ranging from 500,000 to 8,000,000 Da with purity as high as 96% and protein
content of 1–2%. The average molecular weight of DNA is, on average, greater than 8,000,000
Da. It was found that the purified DNA was soluble only in water, the resulting films are too
water sensitive and have insufficient mechanical strength, so are not compatible with typically
fabrication processes used for polymer based devices. It has also been observed that many
particulates are present in the DNA films. Therefore, additional processing steps are performed
to render DNA more suitable for device fabrication with better film quality. This DNA–CTMA
films can be cast by standard methods like spin coating, doctor blading, dip coating, drop casting,
etc. and exhibit excellent transmission over a broad wavelength range.
DNA–CTMA in Organic Light Emitting Diodes
DNA can also play a vital role in enhancing light emission in OLEDs. This stems from the fact
that DNA–CTMA has large band gap of 4.7 eV for potential use as electron blocking layer
(EBL). Hagen et al. have reported that incorporating DNA–CTMA as an EBL into fluorescent
type OLEDs. resulted in BioLEDs that are as much as 10 times more efficient and 30 times
brighter than their OLED counterparts. The light emission from green and blue-emitting
conventional OLEDs is compared to DNA-containing BioLEDs operated under the same bias
conditions and processing conditions including active area. The role of blocking electron flow is
to enhance the probability of radiative electron-hole recombination, leading to increased device
efficiency and luminance. Reference OLEDs are fabricated which are identical to the BioLEDs
except that the DNA–CTMA EBL layer was replaced with organic EBL materials (PMMA –
polymethylmethacrylate or PVK – polyvinyl carbazole). The reason for increases in the device
efficiency and luminance are primarily due to the low DNA–CTMA LUMO level (0.9 eV) that
allows for more efficient electron-hole recombination in the emitting layer of the device by
reducing electron flow into the anode region.
Summary and Outlook
Optoelectronic devices, employing DNA-based biopolymers as either EBL or dielectric layers,
can significantly enhance the performance of these devices, compared to their counterparts.
Additionally, the molecular weight of DNA can be tailored, with the help of a sonication
procedure, to realise molecular weights ranging from 200,000 to 8,000,000 Da, which correspond
to 220–12,000 base pairs, respectively. DNA-surfactant complexes render excellent thin films
using common organic solvents. This process also enhances the mechanical properties of the
resulting thin films and neutralises the charge of DNA. Large band gap, dielectric constant (7.8),
fully transparent through the visible regime of the spectrum, tunable electrical resistivity and
thermal stability (up to 230◦C) make DNA–CTMA suitable for numerous electronic and
optoelectronic devices. Although the mechanisms are not yet completely understood, it is
proposed that charged species, present in bulk of DNA–CTMA and at the interface of DNA–
CTMA and the organic semiconductor layer, are likely to be responsible for the hysteresis in the
transistor characteristics. Another possible explanation is related to the formation of an electrical
double layer between DNA–CTMA and the semiconductor layer, which is reflected in the
measurement of an unusually high capacitance at low frequency. Furthermore, due to the
compatibility of carbon/hydrogen-based organic semiconductors with organic biomolecules,
there can be a great opportunity to integrate such bio-organic semiconductor devices with living
organisms. In general the largely independent bio/lifesciences and information technologies of
34
today can thus be bridged in an advanced cybernetic approach using organic semiconductor
devices . This field of bio-organic electronic devices is proposed to be the future mission of
organic semiconductor devices.
References
1. Huitema HE, Gelinck GH, Van Veenendaal E, Cantatore E, Touwslager FJ et al. (2003) A flexible QVGA display with organic transistors. IDW (Informations-dienst-wissenschaft) 1663
2. Darlinski G, B¨ottger U, Waser R, Klauk H, Halik M, Zschieschang U, Schmid G, Dehm C (2005) J Appl Phys 97:093708
3. Crone B, Dodabalapur A, Gelperin A, Torsi L, Katz HE, Lovinger AJ, Bao Z (2001) Appl Phys Lett 78:2229
4. Robinson BH, Seaman NC (1987) Protein Eng 295:1
5. Yan H, Zhang X, Shen Z, Seeman NE (2002) Nature 62:415
6. Turberfield A (2003) Phys World 43:16
7. Braun E, Eichen Y, Sivan U, Yoseph GB (1998) Nature 291:775
8. de Pablo PJ, Moreno-Herrero F, Colchero J, G´omez Herrero J, Herrero P, Bar´o AM, Ordej´on P, Soler JM, Artacho E (2000) Phys Rev Lett 85:4992
9. Cai L, Tabata H, Kawai T (2000) Appl Phys Lett 77:3105
10. Storm AJ, van Noort J, De Vries S, Dekker C (2001) Appl Phys Lett 79:3881
11. Hwang JS, Kong KJ, Ahn D, Lee GS, Ahn DJ, Hwang SW (2002) Appl Phys Lett 1134:81
Article-5 Terahertz Photonics
Rohan Katti, Research Scholar, Department of ECE, SRM University
It is evident from the current scenario that data traffic is increasing exponentially with Internet
Protocol (IP) traffic and is expected to reach over 130 exabytes per month by 2018. The impact
of such a humongous increase in data traffic will be on wireless channels, as mobile users make
the most use of online services. This increase in the ultra-high network capacity calls for the
requirement of much higher wireless transmission rates in different connection links between
each base station, between a base station and an end-user device, between each end-user device,
etc. The prospective data rate for wireless communications in the market place will be 100 Gbps
within 10 years. The total allocated bandwidth which is around 7 GHz~9 GHz for current
technologies such as millimeter wave communications will limit the total throughput of the
channel to an insufficient level for the increasing demand. This calls for a new frequency band
called terahertz frequency band (0.1 THz – 10 THz) when the bandwidth requirement is few
tens of GHz. The lack of readily available THz sources and detectors has led to this relatively
unexplored region of the electromagnetic spectrum being termed the “THz gap”.
It can be inferred from Shannon’s formula that the information capacity or the data rate is
associated with the bandwidth and the signal to noise ratio. Higher data rate terahertz
communication can be possible due to the availability of large bandwidth even though the signal
power tends to decrease with carrier frequency. One of big obstacles in terahertz
communications is the atmospheric attenuation which increases with the increase in frequency.
35
Due to the limitation of attenuation, transmission distance is limited. Several frequency bands
have been designated for particular applications based on the transmission distance, some of
which are 100 GHz~150 GHz for long distance (1 km~10km), < 350 GHz for medium distance
(100 m~1 km), < 500 GHz for in-door (10~100 m). Above 600 GHz, there are two windows
for in-door communications; 625 GHz~725 GHz, and 780 GHz~910 GHz. When the
frequency exceeds 1 THz, the radio wave undergoes a significant absorption by water vapour
and oxygen molecules in the atmosphere, and is attenuated by less than one tenth at only 1-m
propagation distance, which is still useful for near-field communications. The effect of rainfall
should also be taken into consideration for outdoor applications.
Based upon the link distance criteria, THz communications have promising applications such as
front- and back-hauling of base stations in femto cells, wireless local area networks in smart
offices, wireless personal area networks in smart homes, near-field communications (NFCs) such
as wireless connections in data centers, device-to-device communications (D2D), etc. In these
applications, one of the important factor which plays a major role is the power consumption,
which is directly related to transmitter and receiver architectures, and has a strong impact on the
real THz link scenario.
To explore undeveloped THz-wave regions for wireless communications, photonic signal
generation is considered to be one of the most powerful technique, and particularly, the
approach with use of telecom- based components is not only a technology driver in the wireless
communications, but also makes it easy to combine the wireless link with fiber-optic networks
seamlessly. In the THz communications research, photonics technologies have been intensively
employed for the transmitter rather than the receiver. It is the easiest way to generate signals at
higher data rates with use of photonic components, which have inherently larger bandwidths
because of their higher carrier frequency of over 100 THz.
One of the key features enabled by THz photonics technologies is the possibility to take benefit
of the very low losses of optical fibers in order to remotely feed the THz emission circuits, which
is useful in the case of backhaul applications. Other key advantage of photonic-based solutions
is the ability to handle multi-carrier and multi-format THz channels as well as carrier switching,
which has no equivalence in electronics-based solutions. This can be achieved by adding optical
laser lines to the optical driving signals. This unique feature of photonics-based transceivers is
in phase with optical network evolution towards ‘flexgrids’ that will expand core networks
bandwidth beyond traditional WDM (wavelength division multiplex) systems. By essence,
photonics could play a major as a convenient ‘optical-to high speed radio’ interface in mixed
network technologies context.
Photonic technologies can help in term of link efficiency, generating high data rate and
coherence, the system still needs more output power at the transmitter in particular for
applications such as backhaul where the distance will have to reach a kilometre. To tackle the
power limitation of photonic devices, the future of photonics-based THz systems may be based
on the combination of power amplifiers associated to photomixers, but performances would
require a monolithic association of the two devices, which has not been achieved in the THz
range.
The primary technology that could improve both the power at the transmitter and the overall
efficiency of the system is ‘photonic integration’. Photonic integration will reduce coupling
losses, such as the loss from fibre to chip and in particular the loss between the laser and the
36
photomixer. It should also enable the use of multiple antenna system that would lead to
advanced active array antennas to compensate the path loss and allow for some tracking. There
is also a need for amplification at both the transmitter and receiver, thus low-noise and wide
bandwidth THz amplifiers for both transmitters and receivers are also a key priority.
Photonics industry has taken a great leap in the advancements in generation and detection of
THz signals in recent years. The primary goal is to obtain a high-quality signal with the high
output power necessary for radio communication and other THz applications. This goal can be
achieved electronically or photonically. Various electronics-based approaches to THz generation
include schemes using Schottky diodes, gallium arsenide and indium phosphide integrated
circuits and resonant tunnel diodes. A photonic approach, on the other hand, has a numerous
advantages. First and foremost, it can generate THz signals that are compatible “out of the box”
with wireless-over-fiber distribution, and that can be directly integrated into existing, low-loss
optical-fiber networks. This approach also allows amplitude and phase modulation with high-
speed data.
With the advancements in compact, high-power, spectrally pure THz sources, researchers have
developed wireless-over-fiber communication setups in the W-band (75- 95 GHz) and for
frequencies above 100 GHz. A typical experimental system for single-carrier, one-way wireless-
over-single-mode-fiber (SMF) transmission, involving heterodyne detection of the combined
output of two lasers through digital processing at the receiver is shown in figure 1.
Figure 1: Terahertz wireless over fiber: A schematic view [4]
With the recent progress in THz photonics technology and integration, THz wireless links could
provide part of the solution for ultra-broadband wireless in the scenario where the demand for
data delivery is continually increasing. There are still many challenges to be addressed for
complete development of THz-based wireless links. The combination of integrated solutions
and receivers of lower noise figure should enable THz wireless links with throughputs matching
optical communication systems—and help move forward the next generation of wireless data.
37
References
1. Nagatsuma T, Ducournau G, Renaud CC, Advances in terahertz communications accelerated by photonics. Nature Photonics, 10(6), 371-379, 2016.
2. Seeds AJ, Shams H, Fice MJ, Renaud CC, Terahertz photonics for wireless communications. Journal of Lightwave Technology, 33(3), 579-587, 2015.
3. Nagatsuma T, Horiguchi S, Minamikata Y, Yoshimizu Y, Hisatake S, Kuwano S, Yoshimoto N, Terada J, Takahashi H, Terahertz wireless communications based on photonics technologies, Optics express, 21(20), 23736-47, 2013.
4. Shams H, Seeds A. Photonics, Fiber and THz Wireless Communication, Optics and Photonics News, 28(3), 24-31, 2017.
Article-6 Industrial Advances in SDN Oriented Optical Networks
Ruturaj Kadikar, Senior Research Associate, Department of CSE, SRM University
Cisco is adding Automation and SDN control to Telecom Italia’s Metro optical network which
can esase the development towards software-controlled next-generation services. This will be
done by deploying Cisco’s latest Aggregation services Router (ASR) technology across TIM’s
Optical Packet Metro (OPM) network.Cisco is claiming the ability to provision 100 Gb/s IP
connectivity to metropolitan areas after this installation.
SDN control over optical networks can allow operators to manage port speeds, protocols, and
wavelengths; support more advanced modulation and detection schemes; and provide for
flexible wavelength routing via dynamic reconfigurable optical add-drop multiplexers
(ROADM). These enhancements will provide greater operational efficiency and control,
including the ability to launch new business models that can facilitate the adoption of 5G
technology.
Verizon is evolving its passive optical networking infrastructure using NG-PON2 technology,
which the carrier plans to control using its software-defined networking (SDN) architecture. A
phased approach for the evolution of NG-PON2 deployment toward [software-defined
networking]- and [network functions virtualization]-based architecture using a common SDN
and NFV infrastructure is being deployed in Verizon’s network.
Voyager is a first step toward unbundling the hardware and software in today’s proprietary
packet-optical transport systems, which include transponders, filters, line systems, and control
and management software goal. Facebook refers to Voyager as a “white box transponder and
routing solution.” It is based on an open source system that combines packet technology for
switching and routing, along with dense wavelength division multiplexing (DWDM) transport
technology.
38
Voyager transponder with 12 QSFP28 ports and 4 x200G DWDM line ports
ECI is now offering its Lambda on Demand, which gives the functionality to layer 1 and the
optical layer which is similar to bandwidth on demand for data traffic in layers 2 and 3 of the
network. The app provides bandwidth on demand for dynamic services and bursty applications
when demand for data spikes. For example, with the data center interconnection backup process
needs a lot of bandwidth for a very short time. The Lambda on demand capability allocates the
necessary number of wavelengths at the designated time. This will reduce service turn up time
on both packet and optical networks, allowing networks to respond to real-time needs within
minutes.
Polatis’ DirectLight optical matrix switch technology enables SDN users to move toward
dynamic fiber cross-connect fabrics that can scale incrementally to tens of thousands of ports
with the lowest loss. Ideal for SDN applications, Polatis all-optical switching can help where
connection loss, stability, and reproducibility are critical. DirectLight connects fibers without
needing light to be present on the fiber, empowering data center operators to pre-provision
paths, and monitor the network. With an embedded OpenFlow agent and SDN support, all-
optical circuit switches from Polatis enable data center operators to enhance performance and
scalability to meet growing bandwidth demands.
Ciena launched the 8700 Packetwave, an important new line of optical networking boxes aimed
at solving the challenges of handling the boom in cloud applications. The 8700 focuses on a
couple of things and does them well, in this case Ethernet and DWDM (Dense Wave Division
Multiplexing). Indeed, the 8700 offers scale, with 2 terabits of total Ethernet over DWDM
switching capacity. It also supports MPLS-TP, with up to 200 10 gigabit Ethernet (GigE) ports
or 20 100 GigE ports. It will solve some of the data-center network’s biggest problems: The
ability to move large amounts of Ethernet at lost cost, with low-energy consumption. One key
to the 8700 is that it is coupled with some of Ciena’s newer management tools, which look a lot
like SDN.
As an initial step towards automating the optical layer, Infinera announced its Automated
Capacity Engineering (ACE) concept that can automate the capacity of the optical layer. This
ability to provide software-defined capacity is based on its Photonic integrated Circuit (PIC)
hardware developed by Infinera. ACE takes previously manual offline route and capacity
planning processes and implements algorithms in a micro services-based path computation
element (PCE). ACE also understands optical impairments and computes optimal Layer 0 routes
between nodes across multiple paths, including automatic routing and wavelength assignment
with multiple path constraints such as traffic engineering cost, distance, and latency.
39
ADVA Optical Networking has introduced the FSP Network Hypervisor with the goal of
bringing software-defined networking (SDN) to legacy optical networks. This Network
Hypervisor creates an abstracted view of the physical infrastructure, which makes it easier to
manage the photonic transmission systems and at the same time provides better network
automation and optimization. A key element to the technology is that the hypervisor can act as
a domain controller for the optical layer. This means that service providers can move away from
static networks toward responsive architectures more suitable for a cloud-driven world. The FSP
Network Hypervisor has been engineered to work with all open source and commercial SDN
controllers — including those from Juniper Networks, NEC/NetCracker, ONOS, and
OpenDaylight.
Reference
www.sdxcentral.com
Article-7 All-Optical Cryptography
M. Valarmathi, Assistant Professor (SG), Department of ECE, SRM University
Information security is one of the major issues for present communication systems and should
be carefully considered in various situations. For instance, lack of communication confidentiality
in military, government and financial sectors could cause enormous damages and severely affect
society. A common way to minimize data security problems is to encrypt information. This is
usually performed in the presentation layer of the OSI model. However, presently most of the
core networks rely on optical fiber communication systems that are safer than other transmission
technologies but are vulnerable to intrusive and non-intrusive fiber tapping. For this reason,
security issues and attack management in Transparent Optical Networks (TON) became a key
point to Network operators.
In this scenario, various proposals for encryption in the physical and optical layers are available.
Chaotic communication is a well-known hybrid secure communication method, where a chaotic
carrier is generated through laser oscillation by all optical system. Several techniques using
Optical CDMA (OCDMA) and spectral encoding approach can be utilized to protect the
confidentiality of user data in access networks. In secure communication, another non-linear
technique utilizes SOA in optical circuits that perform EX-OR operation between signal and a
delayed version of it to enable optical encryption. Nonlinear effects are used to distort the
amplitude and phase of optical signals and to encrypt them. The advantage of this method is
that the secured signal can travel more than 200Km at 40Gbps without any drop. Optical systems
are also capable of encrypting real world 3D objects.
40
Schematic representation of a laser-diode-based cryptosystem
References
1. Lazzez, A. (2015). “All-optical networks: Security issues analysis.” Journal of Optical Communications and Networking, 7(3), 136–145.
2. Furdek, M. (2011). “Physical-layer attacks in optical WDM networks and attack-aware network planning.” European Journal of Operational Research, 178(2), 1160–1167
3. Honzatko, P. (2010). “All-optical wavelength converter based on fiber cross-phase modulation and fiber bragg grating.” Journal of Optics Communications, 283, 1744–1749.
4. Rejeb, R., Leeson, M. I., and Tomkos, I. (2010).“Control and management issues inall-optical networks.” IEEE Journal on Selected Areas in Communications, 5(2), 132–139
Article-8 Buy Lumens, Not Watts
G. Kalaimagal, Assistant Professor (OG), Department of ECE, SRM University
The Indian markets are flooded with cheap LED products of less-than-standard quality. Buying
the wrong product leads to losses in the long run. Here are a few pointers to ensure you choose
the right LED bulbs. The age old assumption is that the higher the consumption wattage marked
on a bulb, the higher is its output. Well, that might have been true for the old incandescent but
for LEDs that concept is history. In reality, higher lumens output and lower consumption
wattage is the ideal combination to look for in a bulb. Thus, a bulb marked to produce a certain
lumens output by consuming, for example 7 watts, is better than a bulb producing the same
lumens consuming 10 watts of power. Good quality LED bulbs come with a warranty period of
at least three years. Anything less than that should raise concerns about the fairness of the deal.
In the Indian market a 9W LED bulb costs around ₹150 to the end users.
Note: An LED bulb consists of an LED chipset and a driver, which is the main power
management system that drives the input voltage and current to the LED chip in utilisable form.
Reference
Paromik Chakraborty, EFY Magazine
41
Article-9 Benefits of Incorporating SDN in Optical NWs
Ruturaj Kadikar, Senior Research Associate, Department of CSE, SRM University
Service providers need a dynamic, application-aware network infrastructure that suits today’s
cloud and mobility needs. Software-defined networking (SDN) and network functions
virtualization (NFV) have great potential to improve the flexibility and responsiveness of
networks, decrease both operating and capital expenses, and add new and innovative features to
many different types of communications networks.
SDN concepts were first applied to the packet portion of the network, since optical transport
couldn’t be programmed. However, new advances in optical technology can allow network
operators to program the optical layer. A few examples are:
• Software-defined optical port speeds, protocols, and wavelengths • Advanced modulation and detection schemes, especially at 100 Gb/s and higher speeds • A flexible wavelength grid rather than a fixed 50 GHz grid • Flexible wavelength routing via dynamic ROADMs • OTN grooming and switching
These technologies open the gate for SDN in the optical transport layer. Employing these
programming capabilities, the optical transport layer can be abstracted to a set of shared,
common resources that can be used dynamically and on-demand. The main reason to adopt
SDN in the optical layer is to reach a unified, multilayer control. In such an environment, packet
and optical networks are not managed separately. A global, central control is aware of the entire
complex of packet and optical resources and is able to use them efficiently for flexible service
creation. Having a unified control results in better resource utilization, simpler end-to-end
orchestration, and rapid and dynamic service turn-up.
The OIF, in its document “OIF Carrier WG Requirements on Transport Networks in SDN
Architectures ,” offers two models for SDN-controlled transport networks. In the first model,
the SDN controller directly controls each node in the network, including the optical nodes. In
this model:
• Each network element needs to support a transport programming interface, such as OpenFlow or Netconf
• The SDN controller communicates with each network element to provision an end-to-end service
• The SDN controller must be aware of the detailed topology and optical switch technology
In the other model, the controller controls a multidomain network and offers an integrated
network view. The multi-domain network is abstracted and appears as a single, flat network for
applications. Each domain exercises internally a choice of control – dynamic routing, GMPLS,
or SDN.
The second model represents a more evolutionary road toward optical SDN. The ONF work
on OpenFlow extensions for transport networks is still underway. In addition, service providers
tend to implement SDN in a staged approach to avoid network instability. As a result, SDN is
deployed alongside existing network control protocols.
We can identify a few building blocks that are necessary for multilayer control:
• Automatic discovery of the network topology, providing updates when the topology
changes
• PCE (Path Computation Engine) – computation of paths based on routing and optical
domain constraints
42
• Allocating resources and provisioning circuits based on the computed path
• Automatically restoring service on a network failure by providing an alternate path
An important element of the multilayer SDN control is the domain gateway controller. This
controller is able to mediate between a legacy optical domain and a higher, multidomain SDN
controller, translating the controller’s commands to the domain protocol and relaying the
detailed optical information to the controller via a standard northbound interface. The domain
controller gateway holds both standard SDN northbound and southbound interfaces, such as
OpenFlow, Netconf, and REST, as well as legacy interfaces such as SNMP. It also functions as
a gateway for a domain controlled by distributed protocols such as GMPLS.
Reference: www.sdxcentral.com
Article-10 Visible Light Communication (VLC)
A. Ramya, Assistant Professor (OG), Department of ECE, SRM University
Overview
Implementation and applications of optical communications are changing very rapidly. It is
surprising that the technology which was thought impossible few decades back has emerged with
unbelievable and amusing advancements. Few emerging technologies in fiber-optic technologies
are visible light communication, wireless optical communication, software defined optical
networking, etc.
The Radio Frequency (RF) communication suffers from various issues such as (a) Interference
mainly from use of mobile phones (b) more latency due to bandwidth limitations (c) As RF
waves easily penetrate the walls, they suffer from security issues. (d) The increase in RF waves,
transmission power beyond a certain limit results in risks to human health (e) RF communication
suffers from power inefficiency because we require a separate setup for communication of the
RF waves. Overcoming the above limitations, Visible Light Communication (VLC) is a
preferred communication technique because of its high bandwidth and immunity to interference
from electromagnetic sources. The revolution in the field of solid state lighting leads to the
replacement of florescent lamps by Light Emitting Diodes (LEDs) which further motivates the
usage of VLC.
Introduction
VLC is a data communication variant which uses visible light between 400 and 800 THz (780–
375 nm). VLC is a subset of optical wireless communications technologies. The technology uses
fluorescent lamps (ordinary lamps, not special communications devices) to transmit signals at 10
kbit/s, or LEDs for up to 500 Mbit/s. It uses electronic devices generally containing a
photodiode to receive signals from light sources. Now-a-days cell phone camera or a digital
camera can be used. The image sensor used in these devices is in fact an array of photodiodes
(pixels) and in some applications its use may be preferred over a single photodiode.
History
Though the concept of using light for communication started in 1880’s, the recent development
started in Japan in 2003. In 2006, researchers from CICTR at Penn State proposed a
43
combination of power line communication (PLC) and white light LED to provide broadband
access for indoor applications. In January 2010 a team of researchers from Siemens and
Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute in Berlin demonstrated
transmission at 500 Mbit/s with a white LED over a distance of 5 metres (16 ft), and 100 Mbit/s
over longer distance using five LEDs. In December 2010 St. Cloud, Minnesota, signed a contract
with LVX Minnesota and became the first to commercially deploy this technology. In July 2011
a live demonstration of high-definition video being transmitted from a standard LED lamp was
shown at TED Global.
Applications
Potential applications of VLC include Li-Fi, vehicle to vehicle communication, robots in
hospitals, underwater communication, information displayed on sign boards and WLAN. VLC
can be used in Li-Fi to provide high speed internet up to 10Gbits/s and in vehicular
communication for lane change warning, pre-crash sensing and traffic signal violation warning
to avoid accidents as these applications require communication with low latency which is
provided by VLC because of its high bandwidth and easier installation due to the existing
presence of vehicle lights and traffic signals. VLC also has applications in areas that are sensitive
to electromagnetic waves, such as aircrafts and hospitals where the radio signals interfere with
the waves of other machines. Visible light is used to provide both lighting and information using
VLC techniques.
Advantages
• Unregulated 200 THz bandwidth in the range of 455-700nm wavelengths. • No licensing fee requirement. • Optical signals cannot pass through walls like radio waves penetrate. Line-of-Sight (LoS)
is essential, that is, the sender and the receiver must see each other directly. Any intervening situation or barrier can be easily recognized. So it is preferred in the military and state mechanisms that require high information privacy and security.
• Stay of signals in the room or office, eliminates the possibility of any interference in adjacent rooms or offices.
• The equipment used is cheaper when compared with RF devices. • Optical signals are not as detrimental as RF signals to the human health. • VLC requires lower energy consumption than RF systems.
Standards
The standardization of VLC has been performed by the Visible Light Communication
Consortium (VLCC) in Japan and IEEE. The Japan Electronics and Information Technology
Industries Association (JEITA) CP-1221, JEITA Cp-1222 and JEITA Cp-1223 are published by
the VLCC. The 802.15.7 is the standard completed by the IEEE for physical and MAC layer.
Modulation Techniques
Modulation in VLC is achieved using variations in the intensity of the light corresponding to the
information in the message signal. Two factors to be considered in the design of the modulation
scheme for VLC include (a) dimming and (b) flickering. The various modulation schemes used
in VLC are
• On–Off Keying (OOK) • Pulse modulation techniques • Color Shift Keying (CSK)
44
References
1. https://en.wikipedia.org/wiki/Visible_light_communication 2. Latif Ullah Khan, ‘Visible Light Communication: applications, architecture, standardization
and research challenges’, Digital Communication and Network, Volume 3, issue 2, May 2017, Pages 78-88
3. Taner Cevik, Serdar Yilmaz, ‘AN OVERVIEW OF VISIBLE LIGHT COMMUNICATION SYSTEMS’, International Journal of Computer Networks & Communications (IJCNC) Vol.7, No.6, November 2015
Article-11 All-Optical Signal Processing
R. Manohari, Assistant Professor (SG), Department of ECE, SRM University
All-optical signal processing is a powerful tool for the processing of communication signals
and optical network applications have been routinely considered since the inception of optical
communication. There are many successful optical devices deployed in today’s communication
networks, including optical amplification, dispersion compensation, optical cross connects and
reconfigurable add drop multiplexers. However, despite record breaking performance, all-
optical signal processing devices have struggled to find a viable market niche. This has been
mainly due to competition from electro-optic alternatives, either from detailed performance
analysis or more usually due to the limited market opportunity for a mid-link device.
Optical signal processing brings together various fields of optics and signal processing—
namely, nonlinear devices and processes, analog and digital signals, and advanced data
modulation formats—to achieve high-speed signal processing functions that can potentially
operate at the line rate of fiber optic communications. Information can be encoded in
amplitude, phase, wavelength, polarization and spatial features of an optical wave to achieve
high-capacity transmission.
Optical or photonic computing uses photons produced by lasers for computation. Photons
promise to allow a higher bandwidth than the electrons used in conventional computers. Most
research projects focus on replacing current computer components with optical equivalents,
resulting in an optical digital computer system processing binary data. This approach offer
prospects for commercial optical computing, since optical components could be integrated
into traditional computers to produce an optical-electronic hybrid.
Future optical communication depends on integrated optical processing. Integrated optical
processing will improve Performance, provide security and provide switching and routing
functions. The key to achieving all-optical processing functions is to use a nonlinear optical
material where different light beams can interact. An SOA is made from semiconductor opto-
electronic material (Indium Phosphide-based). The design of SOAs developed in two
directions: as a linear amplifier and as a nonlinear medium. The nonlinear effects should be
exploited for use in variety of applications such as all optical signal processing.The main
practical physical mechanisms used for optical nonlinearity in SOAs are cross-gain modulation
(XGM), cross-phase modulation (XPM), four-wave mixing (FWM) and nonlinear polarization
rotation.
45
Reference
1. “Signal Processing Using Opto-Electronic Devices”, Mary McCathy, Simon Fabbri and Andrew Ellis, All Optical signal processing, 2015 – Springer
2. “All-Optical Signal Processing”, Alan E.Willner, salman Khaleghi, Mohammad Reza Chitgarha and Omer Faruk Yilmaz, Journal of Lightwave Technology, vol.32, Issue 4, 2014, pp.640-680
Solution for Crossword Puzzle
Across Down
2 Simplex 1 Twelve
4 OTDR 3 Modulator
5 Single 5 Submarine
6 Infrared 8 Biconic
7 dBm 10 Distribution
9 Conductor 12 MSDS
11 Composite 16 Cladding
13 Ribbon 17 Insulator
14 Photon 22 Plenum
15 Reflection 23 Shannon
18 PCM 24 Yellow
19 Hybrid 26 Active
20 Refraction 27 General
21 LED
25 Wavelength
28 Orange
29 WDM
30 SONET
top related