welcome to your integrated ect cad/cam using pics presentation evening part of digital d&t...

Welcome to YOUR Integrated ECT CAD/CAM using PICs Presentation

Evening

Part of Digital D&T Programme about

Embedding Electronics in CAD/CAM products.

So why did we take part in this project…..?

Supporting the initiative…….

"I think British design is important across the world. It's one of the things that makes Britain stand out around the world. I think that's incredibly important. It's part of our global identity." Ed Vaizey, October 2010

“There has to be a sense that manufacturing offers a good, attractive, career opportunity through skill training for school leavers and for graduates. Partly this is about capturing the imagination of what it will be like in the industries of the future. It is also about communicating that average salaries are comparable to those in the legal or financial services.”Vince Cable, January 2011

but the downside is…….

0

10,000

20,000

30,000

40,000

50,000

60,000

70,000

80,000

90,000

100,000

D & T:ResistantMaterials

D & T: FoodTechnology

D & T: GraphicProducts

D & T: TextilesTechnology

Other Design &Technology

D & T:ElectronicProducts

D & T: Systems& Control

No

of

15 Y

ear

Old

s A

ttem

pti

ng

GCSE D&T entries: 2007, 2008, 2009 and 2010

5%3%

Statistical First Release; DCSF; 2007, 2008, 2009

Awarding bodies 2010

You are the face of the future of our subject – without your passion, you lobbying your SLT, your governors, your local press, your MP ………we are a dead subject

So why are we here…..?

Learning Outcomes

By the end of the session, course delegates will :-Have designed a rear bike light for a mountain bike (beginners) a SOS whistle with some LED features (advanced)

have designed a circuit board using PICs have an understanding of some of the features of CAD softwareDesign a CAD housing for the productProduced .stl files for 3D printing

Designing a PIC Designing a PIC based circuitbased circuit

We used the following algorithm for designing our project

PROCESS OUTPUTINPUT

Downloaded Program

FEEDBACK

Designed the Printed Circuit Board

Designed a CAD enclosure for the product ready for

3D printing

The Bike Light – Ian, Nicky & Les

The Bike Light – Ian, Nicky & Les PCB

Stuff

Worked hard to integrate small switches – all sorts of problems then changed design

You may find this link useful it will provide you with a viewer to look at .stl files

www.edrawingsviewer.com/pages/products/index.htm

Bike Light

Ian will talk about the

CAD software

Over to you for your

presentations

SoS Whistle

The SoS Whistle – Ian, Nicky & Les

On/off switch

2 wire contacts in

lid

Mates with 2 contacts

in body when lid is screwed

down

So much to tell you here…….

I think I’ll best describe the

PCB

Over to you for your

presentations