welcome to qmi qmi paint sealant presentation. teflon ® / ptfe dynamic utilized since 1938 –auto...
Post on 15-Jan-2016
232 Views
Preview:
TRANSCRIPT
Welcome to QMI
QMI Paint Sealant Presentation
Teflon® / PTFE Dynamic
• Utilized since 1938
– Auto racing– Aircraft– Space travel
• Numerous applications, including Paint Sealant
– Heavy industry
PTFE Chemical Formula
• (CF2CF2)n
• C = Carbon
– backbone of universe
• F2 = Fluorine
– low surface energy– chemically inert
PTFE Chemical Bonds
1. Carbon to Carbon• forms backbone
2. Carbon to Fluorine• forms shield
Powerful binding forces
PTFE Fluorine Shield
Carbon backbone surrounded by sheath of large fluorine atoms
• Low surface energy– Low coefficient of friction– Non-sticking
• Powerfully bonded– Fracture resistance– High thermal stability
• Large fluorine atoms– Other atoms cannot penetrate– Chemically inert
PTFE Moisture / Humidity
• Hydrophobic– Does not combine with water– Does not dissolve in water
• Resistant to hydrolysis– Does not decompose,
react with water
• Barrier to water permeation– Stable after year-long water immersion
PTFE Light & Age Stability
• Transparent to ultraviolet light
• Resistant to:– Oxidation– Surface fouling– Discoloration– Embrittlement
• Proven 20-year Florida test
PTFE Long Service Life
• Retains properties after aging• Withstands exposure to:
– High temperature
• 780°F / 415°C
– Solvents– Oils– Oxidizing agents– Ultraviolet light– Other environmental agents
Combined Ingredient Benefits
• Ultimate shine & protection• Hard, mirror-like finish• Sun shield protects paint
against fading• Never turns gray or yellow
when exposed to sunlight
• Seals against oxidation, corrosives, salts, dirt and insects
• Dirt and grime wash off easily• Unsurpassed durability
Method of Application
• Easy to apply– By hand
– By orbital buffer• Removes road film
and detergent build-up– Often eliminates need
to use rubbing compounds
Applications
– Non-abrasive, safe for clear-coat finishes
• Fiberglass and formica– Counter tops, sinks,
bath tubs, showers, etc.
– Automobiles, trucks, marine, aircraft, etc.
• Approved for enamel, lacquer, metal flake and metallic painted surfaces
Q-LAB Test - QMI & CPC
• Q-Lab Weathering Research Service– Accelerated weather gloss test
• 10 painted panels, 75 mm x 152 mm– 5 QMI panels, 5 CPC panels– Each panel polished and buffed– Test cycle
• 8 hours UV light• 4 hours condensation (moisture)
– Gloss reading every 100 hours• 500 hours represent approximately 6 months
QMI / CPC Test Results
Specimen Original Present Change Combined Change
QMI 100 hrs.
QMI 200 hrs.
QMI 300 hrs.
QMI 400 hrs.
QMI 500 hrs.
83
83
82
82
84
84
82
82
85
82
-1
1
0
-3
2
Total gloss change on 5 plates: -1 point (gloss increase)
Average gloss change per plate: -0.5 point (gloss increase)
CPC 100 hrs.
CPC 200 hrs.
CPC 300 hrs.
CPC 400 hrs.
CPC 500 hrs.
88
89
87
86
88
85
86
84
84
82
3
3
3
2
6
Total gloss change on 5 plates: 17 points (gloss decrease)
Average gloss change per plate: 3.4 points (gloss decrease)
Q-LAB Report No. 1 — 100 Hours
QMI / CPC Test Results
Specimen Original Present Change Combined Change
QMI 200 hrs.
QMI 300 hrs.
QMI 400 hrs.
QMI 500 hrs.
83
82
82
84
80
82
84
81
3
0
-2
3
Total gloss change on 4 plates: 4 points (gloss decrease)
Average gloss change per plate: 1 point (gloss decrease)
CPC 200 hrs.
CPC 300 hrs.
CPC 400 hrs.
CPC 500 hrs.
89
87
86
88
85
84
83
82
4
3
3
6
Total gloss change on 4 plates: 16 points (gloss decrease)
Average gloss change per plate: 4 points (gloss decrease)
Q-LAB Report No. 2 — 200 Hours
QMI / CPC Test Results
Specimen Original Present Change Combined Change
QMI 300 hrs.
QMI 400 hrs.
QMI 500 hrs.
82
82
84
81
83
81
1
-1
3
Total gloss change on 3 plates: 3 points (gloss decrease)
Average gloss change per plate: 1 point (gloss decrease)
CPC 300 hrs.
CPC 400 hrs.
CPC 500 hrs.
87
86
88
83
83
83
3
4
3
Total gloss change on 3 plates: 12 points (gloss decrease)
Average gloss change per plate: 4 points (gloss decrease)
Q-LAB Report No. 3 — 300 Hours
QMI / CPC Test Results
Specimen Original Present Change Combined Change
QMI 400 hrs.
QMI 500 hrs.
82
84
83
82
-1
2
Total gloss change on 2 plates: 1 point (gloss decrease)
Average gloss change per plate: 0.5 point (gloss decrease)
CPC 400 hrs.
CPC 500 hrs.
86
88
81
82
5
6
Total gloss change on 2 plates: 11 points (gloss decrease)
Average gloss change per plate: 5.5 points (gloss decrease)
Q-LAB Report No. 4 — 400 Hours
QMI / CPC Test Results
Specimen Original Present Change Combined Change
QMI 500 hrs. 84 82 2 Total gloss change on 1 plate: 2 points (gloss decrease)
CPC 500 hrs. 88 83 5 Total gloss change on 1 plate: 5 points (gloss decrease)
Q-LAB Report No. 5 — 500 Hours
Average Gloss Decrease
-0.5
0.5
1.5
2.5
3.5
4.5
5.5
QMI -0.5 1 1 0.5 2
CPC 3.4 4 4 5.5 5
100 hours 200 hours 300 hours 400 hours 500 hours
Total Gloss Decrease - 500 Hours
0
10
20
30
40
50
60
70
QMI 9
CPC 61
Total Gloss Decrease - 500 hours
QMI Paint Sealant
• The perfect solution for today’s polishing needs
Thank you!
It’s time ...
top related