waverunner 6 zi oscilloscopes - teledyne...
Post on 27-Aug-2019
216 Views
Preview:
TRANSCRIPT
WaveRunner 6 Zi Oscilloscopes400 MHz –4 GHz
Key Features
• 400 MHz - 4 GHz bandwidths
• Up to 40 GS/s sample rate
• 12.1” touch screen display
• Advanced Tools
– Spectrum Analyzer Mode
– WaveScan – Search and Find
– LabNotebook Documentation and Report Generation
– History Mode - Waveform Playback
• Comprehensive set of serial data analysis, debug, validation and com-pliance tools
• Advanced Triggering with TriggerScan and Measurement Trigger
• WaveRunner 620MZi complete debug bundle available
• 18 digital channels with 2 GS/s
– Analog and Digital Cross-PatternTriggering – Digital Pattern Search and Find – AnalogandDigitalTiming Measurements
– Logic Gate Emulation
– Activity Indicators
Superior Validation, Debug, AnalysisTheWaveRunner6Zidefines superiority in a test instrument with a powerful feature set including a wide range of application packages, advanced triggering to isolate events, a user interface developed for quick and easy navigation, a wide range of probing options, and lightning-fast performance.
Excellent Signal FidelityTheWaveRunner6Zifeaturesapristinesignal path that offers unmatched signalfidelitywithlownoise,providingaccuracy which can be counted on. Thisperformanceisaugmentedbya huge offset and timebase delay adjustment to allow easy signal and amplifierperformanceassessmentand zooming on vertical and horizontal signal characteristics.
Most Comprehensive Serial Data AnalysisWaveRunner6Zioffersthemost tools for serial data analysis. With over 30 trigger, decode, and compliance solutions,WaveRunner6Zicanaddress problems with unique, powerful viewsandautomatedtools.TheSDAIIserial data analysis package performs eye diagram and jitter testing which is ideal for characterization and debug.
WaveRunner 620MZiTheWaveRunner620MZimodelincludes some of the most commonly used options as part of the standard configuration,reducingconfusionwhen choosing a powerful toolset for debugging. In addition to the versatile software options, it is equipped with 40 GS/sand128Mptsofmemorytoensure common debug needs are covered.
The WaveRunner 6 Zi oscilloscope family features 400 MHz - 4 GHz of bandwidth, 40 GS/s sampling rate, exceptional signal fidelity, and fast operation, helping to get the job done quickly and accurately. The versatile toolset provides every necessity for an engineer to validate a design, debug errors at board bring up, and offer powerful analysis capabilities to characterize an embedded system. The WaveRunner 6 Zi is the ultimate debug machine.
2
WaveRunner 6 Zi combines the power of a fully featured multi-purpose oscilloscope, a dedicated logic analyzer for mixed signal design, and a protocol analyzer for serial data debug.
1. Industry leading performance— 400MHz—4GHz,40GS/s, 128Mptsof analysismemory
2. 12.1"Widescreen(16x9)highresolutionWXGAcolortouchscreen display
3. 90ºrotatingandtiltingdisplayforoptimal viewing of signals
4. Smallfootprint,only8.1"deep
5. Easy connectivity with two convenient USBportsonthefront, two ontheside
6. USBTMC(TestandMeasurementClass)portsimplifiesprogramming
7. Deepesttoolboxwithmoremeasurement, more math, more power
COMPLETE DEBUG SOLUTION FROM 400 MHz–4 GHz
13
Accessory pouch option available.
6
5
3
1
7
8
3
8. Largest selection of serial triggers and decoders—morethan20—availabletoprovide a total system view
9. Serial trigger captures signals up to3Gb/s
10. WavePilot consolidates important oscilloscope debug features in one place. LEDs illuminate to indicate navigation options and active oscilloscope features
11. TheSuperKnobprovidesjoystickcontrolto easily navigation to key debug and documentation features
12. LBUSprovideseasyconnectiontotheoptionalmixedsignalfeature,providingupto36digitalchannels
13. Wide array of probes and accessories to accommodate any probing challenge
COMPLETE DEBUG SOLUTION FROM 400 MHz–4 GHz
10
5
2
4
3
11
9
12
4
Advanced Trigger CapabilitiesA powerful combination of high band-widthedgeand10differentSMARTtriggers, four stage cascade triggering, measurement trigger, and triggerscan areallstandard.Thesefeaturesallowyou to isolate the problem quickly andbeginfocusingonthecause.Themeasurement trigger offers a powerful option to qualify a trigger event based onaqualifiedmeasurementwithgreatresolution. A high-speed serial trigger enablestriggeringonupto3Gb/sserialpatternsofupto80-bitsinlength. Afullrangeofserialtriggers(I2C,SPI,UART,RS-232,Audio(I2S,LJ,RJ,TDM),CAN,LIN,FlexRay,MIL-STD-1553,SATA,8b/10b,USBandmanyothers)are also available.
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
A B
I2C
FlexRay
SPI LIN UART UART
DEEP INSIGHT TO CLARIFY COMPLEX SIGNALS
Sequence Mode AcquisitionSequence mode enables capture offinedetailsofcomplexeventsequences occurring over long time intervals, while ignoring the intervals between events, allowing for the most efficientuseoftheoscilloscope’smemory.Timestampsareprovidedfor each acquisition and dead-time between triggers is minimized to less than1μs.CombineSequencemodewith advanced triggers to isolate rare events over time and analyze afterwards.
TriggerScan™
TriggerScanuseshigh-speedhardwaretriggering capability with persistence displays to capture only the signals of interest and provide answers up to 100timesfasterthanothermethods.Traditionalfastdisplayupdatemodeswork best on frequent events occurring onslowedgerateswhileTriggerScanexcelsinfindinginfrequenteventsonfast edge rates.
WaveScan Advanced SearchWaveScan provides powerful isola-tion capabilities that hardware triggers can’tprovideinordertolocaterunts,glitches, and other waveform anoma-lies. WaveScan allows searching analog, digital or parallel bus signals in a single acquisition using more than 20differentcriteria.Or,setupascancondition and scan for an event over hours or even days.
History ModeHistory mode lets you scroll back in time to isolate those anomalies, measure them with parameters or cursors,andquicklyfindthesourceof theproblem.Historymodeisalwaysbufferingwaveforms,sono useractionis required to save traces, only to invoke the viewer.
5
DEEP INSIGHT TO CLARIFY COMPLEX SIGNALS DISPLAY OPTIMIZED FOR ANALYSIS
Graphical Track, Trend, and Histogram ViewsThetrackmathfunctionplotsmeasurementvaluesontheY-axisandtimeontheX-axistodisplayameasurement change time-correlated to the original channel acquisition; perfect for intuitive understanding of behaviors in frequency modu-lated(FM)orpulsewidthmodulated(PWM)circuitsandjittermeasure-ments, including modulation or spikes. Histograms provide a visual distribu-tion representation of a large sample of measurements, allowing faster insight.Thetrendmathfunctionisideal forplottingslowchangesinmeasurement values.
Rotating DisplayThe12.1"highresolutionWXGAwide screenisdesignedtoprovidethe bestviewofanysignaltypeon the display.
Thewidescreenisidealforavarietyofsignals where long records are required and zooming or scrolling results in a large block of data.
Rotatethescreen90°degreesto optimize the display for viewing digital signals, jitter tracks, eye diagrams, and frequencyplots.Thescreenimagewilladjust automatically when rotated.
Tiltthedisplayupordownineitherorientation to minimize reflections or glare.
6
The WaveRunner 6 Zi features the most complete serial data solutions. Solving serial data problems requires intimate knowledge of the protocol to get started. With the WaveRunner 6 Zi, the oscilloscope is the expert. Simply connect your probes or cables and the scope can provide the correct level of detail needed to view, debug, and analyze the serial data signals.
Solutions address the Embedded, Military and Avionics, Handset/Mobile/Cellular, and Storage/Peripherals/Interconnects, with a combination of decode, trigger, measure/graph, ProtoSync, and compliance tools.
Whether the protocol under test is a new emerging standard requiring jitter and eye diagram testing, a mature standard requiring compliance testing, or an embedded standard requiring protocol measurement and timing analysis, WaveRunner 6 Zi has it all.
A TOTAL SOLUTION FOR SERIAL DATA
ProtoSyncProtoSync combines the oscilloscope viewwithasimultaneousview ofdata link layer decodes on the same instrument.ThiscombinationmakesProtoSync very effective in debugging PCIExpressnegotiationrates.
CompatiblewithPCIExpress,USB2,SAS,SATA,andFibreChannel.
T DTriggerPowerful,flexibletriggersdesignedby people who know the standards, with the unique capabilities you want toisolateunusualevents.Conditionaldatatriggeringpermitsmaximumflexibilityandhighlyadaptableerrorframe triggering is available to isolate errorconditions.Efficientlyacquirebursted data using Sequence Mode to maximizetheoscilloscope'smemoryusage. Sequence Mode enables the oscilloscope to ignore idle time and acquire only data of interest.
DecodeDecoded protocol information is color-codedtospecificportionsoftheserialdata waveform and transparently overlaid for an intuitive, easy-to-understand visual record. All decoded protocols are displayed in a single time-interleavedtable.Toucharowinthe interactive table to quickly zoom to a packet of interest and select a columnheadertocreatefiltercriteria,as is commonly done in spreadsheets. Easily search through long records for specificprotocoleventsusingthebuilt-in search feature.
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
AB
I2C SPI UART RS-232 FlexRay LIN CAN CAN FD USB2
7
WaveRunner 6 Zi Serial Data Protocol SupportM E
Measure/GraphQuickly validate cause and effect with automated timing measurements to or from an analog signal or another serial message. Make multiple measurements in a single long acquisition to quickly acquire statistics during corner-casetesting.Serial(digital)datacanbeextractedtoananalogvalueand graphed to monitor system performance over time, as if it was probeddirectly.Completevalidationfaster and gain better insight.
Eye DiagramRapidly display an eye diagram of your packetized low-speed serial data signal withoutadditionalsetuptime.Useeye parameters to quantify system performance and apply a standard or custom mask to identify anomalies. Mask failures can be indicated and can force the scope into Stop mode.
SDAIIorDDRDebug(optional)createeyediagramsofstreamingNRZserialdata or DDR signals, and measure and analyze jitter breakdown.
Deco
de
Trig
ger
Mea
sure
/Gra
phEy
e Di
agra
m
I2C • • • •SPI • • • •UART-RS232 • • • •USB2-HSIC •CAN • • • •CAN FD • • • •FlexRay • • • •LIN • • • •SENT •MOST50/150 •BroadR-Reach •ARINC429 • • •MIL-STD-1553 • • • •SPACEWIRE •Ethernet (10/100Base-T) • •Ethernet (1000Base-T) •MDIO •USB 2.0 • • • • • •8b/10b • • •Fibre Channel •SATA (1.5 & 3 Gb/s) • • •SAS (1.5 & 3 Gb/s) • •PCI Express (Gen1) • •LPDDR2 • •DDR2 • •DDR3 • •SPMI •D-PHY/CSI-2/DSI • • •DigRF3G • •DigRFv4 • •UniPro •M-PHY • •Audio (I²S, LJ, RJ, TDM) • • •Manchester •NRZ • • •
Prot
oSyn
cQ
ualiP
HY
Auto
mot
ive
+ In
dust
rial
Avio
nics
Hig
h Sp
eed
Com
putin
g,
Stor
age
+Per
iphe
rals
MIP
IO
ther
Mem
ory
QualiPHY / ComplianceCompliancetestingisacriticalpartofthe design cycle in order to ensure that requirementsaremet.TheQualiPHYframework provides an automated and easy-to-use compliance testing platform for a number of serial data standards.
8
SDA II – Advanced Tools to Isolate and Analyze (WR6Zi-SDAII)Unleashthepowerofserial dataanalysis for understanding and charac-terizing a design, proving compliance, and understanding why a device or hostfailscompliance.TheSDAIIarchi-tecture provides fast updates and eye diagramcreation.Combinedwithupto128Mptsrecordlengthsandmorecomplete jitter decomposition tools, SDA II provides a fast and complete understanding of why serial data fails a compliance test. Whether debugging eye pattern or other compliance test failures,theWaveRunner6ZiSeriesrapidly isolates the source of the problem.
APPLICATION SPECIFIC SOLUTIONS
Advanced jitter decomposition meth-odologies and tools provide more informationaboutrootcause.TjAnalysis,RjBUjAnalysisandDDj
Analysis are made simple with the deepest toolset dedicated to providing the highest level of insight into your serial data signals.
Compliance Reports contain all of the tested values, the specific test limits and screen captures. Compliance Reports can be created as HTML, PDF or XML.
QualiPHYQualiPHY is designed to reduce the time, effort, and specialized knowledge needed to perform compliance testing on high-speed serial buses.
• Guides the user through each test setup
• Performs each measurement in accordance with the relevant test procedure
• Compareseachmeasuredvaluewiththeapplicable specification limits
• Fully documents all results
• QualiPHY helps the user perform testing the right way — every time
Supported Standards:– ENET
– USB
– DDR2,DDR3,LPDDR2
– MIPI-DPHY
– BroadR-Reach
– MOST50,MOST150
9
Eye Doctor II (WR6Zi-EYEDRII)TheEyeDoctorIIadvancedsignalintegrity toolkit enables a complete set of channel emulation, de-embedding, and receiver equalization simulation tools. It provides capability to emulate a serial data link, de-embed or embed afixture,cableorserialdatachannel,add or remove emphasis, and perform CTLE,FFE,orDFEequalization.
Power Analyzer Software Option (WR6ZI-PWR)Quickly measure and analyze operating characteristics of power conversion circuits. Make automatic switching device measurements and identify areas of loss and conduction with color-codedoverlay.Controlloopmodulation analysis and line power harmonictestingareallsimplifiedwitha dedicated user interface.
Advanced Probe InterfaceThe advanced active probe interface gives tremendous flexibility for measuring high voltages, high frequencies, currents, or differential signals.
High Impedance Active Probes
High Bandwidth Differential Probes
High Voltage Differential Probes
High Voltage Passive Probes
Current Probes
DDR Debug Toolkit (WR6Zi-DDR3-Toolkit)TheDDRDebugToolkitprovidestest, debug and analysis tools for the entireDDRdesigncycle.TheuniqueDDR analysis capabilities provide automatic Read and Write burst sepa-ration, bursted data jitter analysis and DDR-specificmeasurementparam-eters.TheWaveRunner6Zisupportsboth standard and custom speed gradesofDDR2andDDR3.
Jitter and Timing Analysis Option (WR6Zi-JITKIT)JITKITmakesitsimpleandeasytounderstand the basic system jitter performance of clock signals and clock-data activities, including period, half period, cycle-cycle, skew, amplitude, differential voltage crossing, slew rate, and a wide variety of other common jitter measurements.
After
Before
10
WAVERUNNER 620MZI
Spectrum Analyzer Option (WR6Zi-SPECTRUM)TheSpectrumAnalyzermodeprovidesa spectrum analyzer style user inter-facewithcontrolsforstart/stopfrequency or center frequency and span.Theresolutionbandwidthisauto-matically set for best analysis or can be manually selected. Vertical Scale can be selected in the desired units and the unique peak search automati-cally labels spectral components and presents frequency and level in an interactivetable.Tomonitorhowthespectrum changes over time, view the spectrogramwhichcandisplaya2Dor3D history of the frequency content.
Having the most commonly used debug tools as part of the standard configuration, the WaveRunner 620MZi model
provides a powerful set of analysis tools for effective debugging. By combining 40 GS/s sample rate and 128 Mpts of
memory with a powerful set of triggers, signals of interest can be isolated with ease. The inclusion of the Spectrum
Analyzer and Serial Trigger and Decode options creates a powerful multi-instrument tool for looking at a system under
test from multiple perspectives. The XDEV customization option and digital filtering package allow the debug setup to
emulate custom applications.
What’s included with the WaveRunner 620MZi?
• 128 Mpts of Memory
• 40 GS/s Sample Rate
• Spectrum Analyzer Software
• Digital Filter Software
• XDEV Customization Package
• I2C Trigger and Decode
• SPI Trigger and Decode
• UART Trigger and Decode
11
40 GS/s Sample Rate and 128 Mpts of Long MemoryA40GS/ssamplerateallowsforadetailed edge reconstruction even for signalswiththefastestrisetimes.Thisis critical for detecting signal integrity issues such as reflections.
Deepmemoryof128Mptsisidealfordebugging long term behavior on high speedserialdatabuses.Forexample,slowly varying physical-layer charac-teristics such as Spread Spectrum Clocking(SSC)mustbeanalyzedoverperiods of milliseconds.
I2C, SPI, and UART Trigger and Decode (WR6Zi-EMB)A serial data trigger will quickly isolate events on a bus eliminating the need to set manual triggers and hoping to catchtherightinformation.Triggerconditions can be entered in binary or hexadecimalformatsandconditionaltrigger capabilities even allow triggering on a range of different events.
Protocol decoding is shown directly on the waveform with an intuitive, color-coded overlay and presented in binary,hexorASCII.Decodingisfasteven with long memory, and zooming in to the waveform shows precise byte by byte decoding.
Digital Filter Software Option (WR6Zi-DFP2)DFP2letsyouimplementFiniteImpulseResponse(FIR)orInfiniteImpulseResponse(IIR)filterstoelimi-nate undesired spectral components, such as noise, and enhances your abilitytoexamineimportantsignalcomponents. You can choose from astandardsetofFIRorIIRfiltersoryou can also design your own custom filters.CreateandapplyavarietyofFIRandIIRdigitalfilterstoyourcapturewaveforms or processed traces.
XDEV Customization Option (WR6Zi-XDEV)With the XDEV option, third party programs can be completely integrated intotheoscilloscope’sprocessingstream.Createcustomizedmathfunc-tionsandparametersusingC/C++,MATLAB,Excel,JScriptorVisual Basicwithouteverleavingthe oscilloscope application - and view the results directly on the oscilloscope, in real-time.
12
WaveRunner 604Zi
WaveRunner 606Zi
WaveRunner 610Zi
Vertical SystemAnalogBandwidth@50Ω(-3dB) 400 MHz
(≥2mV/div)600MHz
(≥2mV/div)1GHz
(≥2mV/div)AnalogBandwidth@1MΩ (-3dB) 400 MHz
(typical)500MHz (typical)
500MHz (typical)
RiseTime(10–90%,50Ω) 875ps (typical)
580ps (typical)
375ps (typical)
RiseTime(20–80%,50Ω) 650ps (typical)
435ps (typical)
280ps (typical)
InputChannels 4BandwidthLimiters 20MHz,
200MHz20MHz, 200MHz
20MHz, 200MHz
Input Impedance 50Ω±2%or1MΩ||17pF,10MΩ||9.5pFwithsuppliedProbeInputCoupling 1MΩ:AC,DC,GND;50Ω:DC,GNDMaximumInputVoltage 50Ω:5Vrms±10Vpeak
1MΩ:400Vmax.(DC+peakAC<10kHz)Channel-ChannelIsolation >100:1uptoratedBW
Vertical Resolution 8-bits;upto11-bitswithenhancedresolution(ERES)Sensitivity 50Ω:1mV/div–1V/div,fullyvariable
1MΩ:1mV/div–10V/div,fullyvariableDCVerticalGainAccuracy (GainComponentofDCAccuracy)
±1%F.S.(typical),offsetat0V
OffsetRange 50 Ω: ±1.6V@1mV–4.95mV/div ±4V@5mV–9.9mV/div ±8V@10mV–19.8mV/div ±10V@20mV–1V/div1 MΩ: ±1.6V@1mV–4.95mV/div ±4V@5mV–9.9mV/div ±8V@10mV–19.8mV/div ±16V@20mV–140mV/div ±80V@142mV–1.4V/div ±160V@1.42V–10V/div
DCVerticalOffsetAccuracy ±(1.5%ofoffsetsetting+1%offullscale+1mV) (testlimit)
Horizontal SystemTimebases Internaltimebasecommonto4inputchannels;anexternalclockmaybeappliedattheExternalinputTime/DivisionRange 20ps/div-1.6ks/divwithstandardmemory
(upto3.2ks/divwith-Smemory,6.4ks/divwith-Mmemory) RISavailableat≤10ns/div; RollModeavailableat≥100ms/divand≤5MS/s
ClockAccuracy ≤1.5ppm+(agingof0.5ppm/yrfromlastcalibration)TriggerandInterpolatorJitter ≤4.5psrms
(typical)<0.1psrms
(typical,softwareassisted)
≤4psrms (typical)<0.1psrms
(typical,softwareassisted)
≤3.5psrms (typical)<0.1psrms
(typical,softwareassisted)Channel-ChannelDeskewRange ±9xtime/div.setting,100msmax.,eachchannelExternalTimebaseReference(Input) 10MHz±25ppmviaoptionalLBUSBNCadapterExternalTimebaseReference(Output) 10MHz3.5dBm±1dBm,synchronizedtoreferencebeingusedbyuser(internalorexternalreference)
viaoptionalLBUSBNCadaptorExternalClock DCto100MHz;(50Ω/1MΩ),Ext.BNCinput,
Minimum rise time and amplitude requirements apply at low frequencies
SPECIFICATIONS
13
WaveRunner 620Zi
WaveRunner 620MZi
WaveRunner 625Zi
WaveRunner 640Zi
Vertical SystemAnalogBandwidth@50Ω(-3dB) 2GHz
(≥5mV/div)2.5GHz
(≥5mV/div)4 GHz
(≥5mV/div)AnalogBandwidth@1MΩ(-3dB) 500MHz
(typical)500MHz (typical)
500MHz (typical)
RiseTime(10–90%,50Ω) 175ps (typical)
160ps (typical)
100ps (typical)
RiseTime(20–80%,50Ω) 130ps (typical)
120ps (typical)
75ps (typical)
InputChannels 4BandwidthLimiters 20MHz,
200MHz,1GHz20MHz,
200MHz,1GHz20MHz,
200MHz,1GHzInput Impedance 50Ω±2%or1MΩ||17pF,10MΩ||9.5pFwithsuppliedProbeInputCoupling 1MΩ:AC,DC,GND;50Ω:DC,GNDMaximumInputVoltage 50Ω:5Vrms±10Vpeak
1MΩ:400Vmax.(DC+peakAC<10kHz)Channel-ChannelIsolation
>100:1uptoratedBW>100:1upto2.5GHz>30:1from2.5GHzto
ratedBWVertical Resolution 8-bits;upto11-bitswithenhancedresolution(ERES)Sensitivity 50Ω:1mV/div–1V/div,fullyvariable
1MΩ:1mV/div–10V/div,fullyvariableDCVerticalGainAccuracy (GainComponentofDCAccuracy)
±1%F.S.(typical),offsetat0V
OffsetRange 50 Ω: ±1.6V@1mV–4.95mV/div ±4V@5mV–9.9mV/div
±8V@10mV–19.8mV/div ±10V@20mV–1V/div
1 MΩ: ±1.6V@1mV–4.95mV/div ±4V@5mV–9.9mV/div
±8V@10mV–19.8mV/div ±16V@20mV–140mV/div ±80V@142mV–1.4V/div ±160V@1.42V–10V/div
50 Ω: BWL ≤ 1 GHz
±1.6V@1mV–4.95mV/div ±4V@5mV–9.9mV/div
±8V@10mV–19.8mV/div ±10V@20mV–1V/div
BWL > 1 GHz ±1.4V@5mV–122mV/div ±10V@124mV–1V/div
1 MΩ: ±1.6V@1mV–4.95mV/div ±4V@5mV–9.9mV/div
±8V@10mV–19.8mV/div ±16V@20mV–140mV/div ±80V@142mV–1.4V/div ±160V@1.42V–10V/div
DCVerticalOffsetAccuracy ±(1.5%ofoffsetsetting+1%offullscale+1mV)(testlimit)
Horizontal SystemTimebases Internaltimebasecommonto4inputchannels;anexternalclockmaybeappliedattheExternalinputTime/DivisionRange 20ps/div-1.6ks/divwith
standard memory (upto3.2ks/divwith
-Smemory,6.4ks/divwith-Mmemory)
RISavailableat≤10ns/div; Roll Mode available at
≥100ms/divand≤5MS/s
20ps/div-6.4ks/divwithstandard memory
RISavailableat≤10ns/div;Roll Mode available at
≥100ms/divand≤5MS/s
20ps/div-1.6ks/divwithstandardmemory (upto3.2ks/divwith-Smemory,
6.4ks/divwith-Mmemory) RISavailableat≤10ns/div;
RollModeavailableat≥100ms/divand≤5MS/s
ClockAccuracy ≤1.5ppm+(agingof0.5ppm/yrfromlastcalibration)TriggerandInterpolatorJitter ≤3psrms
(typical)<0.1psrms
(typical,softwareassisted)
≤2.5psrms (typical)<0.1psrms
(typical,softwareassisted)
≤2psrms (typical)<0.1psrms
(typical,softwareassisted)Channel-ChannelDeskewRange ±9xtime/div.setting,100msmax.,eachchannelExternalTimebaseReference(Input) 10MHz±25ppmviaoptionalLBUSBNCadapterExternalTimebaseReference(Output) 10MHz3.5dBm±1dBm,synchronizedtoreferencebeingusedbyuser(internalorexternalreference)
viaoptionalLBUSBNCadaptorExternalClock DCto100MHz;(50Ω/1MΩ),Ext.BNCinput,
Minimum rise time and amplitude requirements apply at low frequencies
SPECIFICATIONS
14
SPECIFICATIONS
WaveRunner 604Zi
WaveRunner 606Zi
WaveRunner 610Zi
Acquisition SystemSingle-ShotSampleRate/Ch 10GS/son4Ch
20GS/son2ChRandomInterleavedSampling(RIS) 200GS/sforrepetitivesignals
(20ps/divto10ns/div)MaximumTriggerRate 1,000,000waveforms/second(inSequenceMode,
upto4channels)IntersegmentTime 1µsStandardMemory(4Ch/2Ch/1Ch)(NumberofSegments)
16M/32M/32M(5,000)
MemoryOptions(4Ch/2Ch/1Ch)(NumberofSegments)
S-32Option: 32M/64M/64M(15,000)M-64Option: 64M/128M/128M(15,000)
Acquisition ProcessingAveraging Summedaveragingto1millionsweeps;continuousaveragingto1millionsweepsEnhancedResolution(ERES) From8.5-to11-bitsverticalresolutionEnvelope(Extrema) Envelope,floor,orroofforupto1millionsweepsInterpolation LinearorSinx/x
Triggering SystemModes Normal, Auto, Single, and StopSources Anyinputchannel,Ext,Ext/10,orline;slopeandleveluniquetoeachsource(exceptlinetrigger)CouplingMode DC,AC,HFRej,LFRejPre-trigger Delay 0-100%ofmemorysize(adjustablein1%incrementsor100ns)Post-trigger Delay 0-10,000divisionsinrealtimemode,limitedatslowertime/divsettingsorinrollmodeHold-offbyTimeorEvents From2nsupto20sorfrom1to99,999,999eventsInternalTriggerRange ±4.1divfromcenter(typical)TriggerSensitivitywithEdgeTrigger(Ch1–4)
2div@<400MHz1.5div@<200MHz0.9div@<10MHz
(DC,AC,and LFRejcoupling)
2div@<600MHz1.5div@<300MHz1div@<200MHz0.9div@<10MHz
(DC,AC,and LFRejcoupling)
2div@<1GHz1.5div@<500MHz1div@<200MHz 0.9div@<10MHz
(DC,AC,and LFRejcoupling)
ExternalTriggerSensitivity, (EdgeTrigger)
2div@1GHz1.5div@<500MHz1div@<200MHz0.9div@<10MHz(DC,AC,andLFRejcoupling)
Max.TriggerFrequency, SMARTTrigger
400MHz@≥ 10mV/div1.9ns
(minimumtriggerable width1.9ns)
600MHz@≥ 10mV/div1.2ns
(minimumtriggerable width1.2ns)
1.0GHz@≥ 10mV/div
(minimumtriggerable width750ps)
ExternalTriggerInputRange Ext(±0.4V);Ext/10(±4V)
Basic TriggersEdge Triggerswhensignalmeetsslope(positive,negative,oreither)andlevelconditionWindow TriggerswhensignalexitsawindowdefinedbyadjustablethresholdsTV-CompositeVideo TriggersNTSCorPALwithselectablelineandfield;
HDTV(720p,1080i,1080p)withselectableframerate(50or60Hz)andLine;or CUSTOMwithselectableFields(1–8),Lines(upto2000),FrameRates(25,30,50,or60Hz), Interlacing(1:1,2:1,4:1,8:1),orSynchPulseSlope(PositiveorNegative)
15
SPECIFICATIONS
WaveRunner 620Zi
WaveRunner 620MZi
WaveRunner 625Zi
WaveRunner 640Zi
Acquisition SystemSingle-ShotSampleRate/Ch 10GS/son4Ch
20GS/son2Ch20GS/son4Ch40GS/son2Ch
RandomInterleavedSampling(RIS) 200GS/sforrepetitivesignals(20ps/divto10ns/div)
MaximumTriggerRate 1,000,000waveforms/second(inSequenceMode,upto4channels)
IntersegmentTime 1µsStandardMemory(4Ch/2Ch/1Ch)(NumberofSegments)
16M/32M/32M(5,000)
64M/128M/128M(15,000)
16M/32M/32M(5,000)
MemoryOptions(4Ch/2Ch/1Ch)(NumberofSegments)
S-32Option: 32M/64M/64M
(15,000)M-64Option:
64M/128M/128M(15,000)
NA
S-32Option: 32M/64M/64M
(15,000)M-64Option:
64M/128M/128M(15,000)
Acquisition ProcessingAveraging Summedaveragingto1millionsweeps;continuousaveragingto1millionsweepsEnhancedResolution(ERES) From8.5-to11-bitsverticalresolutionEnvelope(Extrema) Envelope,floor,orroofforupto1millionsweepsInterpolation LinearorSinx/xorcubic(usingmathtool)
Triggering SystemModes Normal, Auto, Single, and StopSources Anyinputchannel,Ext,Ext/10,orline;slopeandleveluniquetoeachsource(exceptlinetrigger)CouplingMode DC,AC,HFRej,LFRejPre-trigger Delay 0-100%ofmemorysize(adjustablein1%incrementsor100ns)Post-trigger Delay 0-10,000divisionsinrealtimemode,limitedatslowertime/divsettingsorinrollmodeHold-offbyTimeorEvents From2nsupto20sorfrom1to99,999,999eventsInternalTriggerRange ±4.1divfromcenter(typical)TriggerSensitivitywithEdgeTrigger(Ch1–4)ProBusInputs
2div@<2GHz1.5div@<1GHz1div@<200MHz 0.9div@<10MHz
(DC,AC,and LFRejcoupling)
2div@<2.5GHz1.5div@<1.25GHz1div@<200MHz 0.9div@<10MHz
(DC,AC,and LFRejcoupling)
2div@<4GHz1.5div@<2GHz1div@<200MHz 0.9div@<10MHz
(DC,AC,and LFRejcoupling)
ExternalTriggerSensitivity, (EdgeTrigger)
2div@1GHz1.5div@<500MHz1div@<200MHz0.9div@<10MHz(DC,AC,andLFRejcoupling)
Max.TriggerFrequency, SMARTTrigger
2.0GHz@≥ 10mV/div
(minimumtriggerable width400ps)
2.0GHz@≥ 10mV/div
(minimumtriggerable width300ps)
2.0GHz@≥ 10mV/div
(minimumtriggerable width200ps)
ExternalTriggerInputRange Ext(±0.4V);Ext/10(±4V)
Basic TriggersEdge Triggerswhensignalmeetsslope(positive,negative,oreither)andlevelconditionWindow TriggerswhensignalexitsawindowdefinedbyadjustablethresholdsTV-CompositeVideo TriggersNTSCorPALwithselectablelineandfield;
HDTV(720p,1080i,1080p)withselectableframerate(50or60Hz)andLine;or CUSTOMwithselectableFields(1–8),Lines(upto2000),FrameRates(25,30,50,or60Hz), Interlacing(1:1,2:1,4:1,8:1),orSynchPulseSlope(PositiveorNegative)
16
WaveRunner 604Zi 606Zi
WaveRunner 610Zi 620Zi
620 MZi
WaveRunner 625Zi 640Zi
SMART TriggersStateorEdgeQualified Triggersonanyinputsourceonlyifadefinedstateoredgeoccurredonanotherinputsource.
Delay between sources is selectable by time or eventsQualifiedFirst InSequenceacquisitionmode,triggersrepeatablyoneventBonlyifadefinedpattern,state,oredge(eventA)is
satisfiedinthefirstsegmentoftheacquisition.HoldoffbetweensourcesisselectablebytimeoreventsDropout Triggersifsignaldropsoutforlongerthanselectedtimebetween1nsand20sPattern Logiccombination(AND,NAND,OR,NOR)of5inputs(4channelsandexternaltriggerinput.Eachsource
canbehigh,low,ordon’tcare.TheHighandLowlevelcanbeselectedindependently.Triggersatstartorendofthepattern
SMART Triggers with Exclusion TechnologyGlitch Triggersonpositiveornegativeglitcheswithwidthsselectableaslowas200ps(dependingonoscilloscopeband-
width)to20s,oronintermittentfaultsWidth(SignalorPattern) Triggersonpositiveornegativeglitcheswithwidthsselectableaslowas200ps(dependingonoscilloscopeband-
width)to20s,oronintermittentfaults
Interval(SignalorPattern) Triggersonintervalsselectablebetween1nsand20sTimeout(State/EdgeQualified) Triggersonanysourceifagivenstate(ortransitionedge)hasoccurredonanothersource.
Delaybetweensourcesis1nsto20s,or1to99,999,999eventsRunt Triggeronpositiveornegativeruntsdefinedbytwovoltagelimitsandtwotimelimits.
Selectbetween1nsand20nsSlew Rate Triggeronedgerates.SelectlimitsfordV,dt,andslope.Selectedgelimitsbetween1nsand20nsExclusionTriggering Triggeronintermittentfaultsbyspecifyingtheexpectedbehaviorandtriggeringwhenthatconditionisnotmet
Measurement TriggerTriggeronmeasurementvalues,Edge,SerialPattern,BusPattern,Non-monotonic
Cascade (Sequence) TriggeringCapability Armon“A”event,thenTriggeron“B”event.OrArmon“A”event,thenQualifyon“B”event,andTriggeron“C”event.
OrArmon“A”event,thenQualifyon“B”then“C”event,andTriggeron“D”eventTypes CascadeAthenB:Edge,Window,Pattern(Logic)Width,Glitch,Interval,Dropout,orMeasurement.Measurement
canbeonStageBonly.CascadeAthenBthenC(Measurement):Edge,Window,Pattern(Logic),Width,Glitch,Interval,Dropout,or Measurement.MeasurementcanbeonStageConly.CascadeAthenBthenC:Edge,Window,Pattern(Logic).CascadeAthenBthenCthenD:Edge,Window,Pattern(Logic),orMeasurement.MeasurementcanbeonStageDonly
Holdoff HoldoffbetweenAandB,BandC,CandDisselectablebytime(1nsto20s)ornumberofevents.MeasurementtriggerselectionasthelaststageinaCascadeprecludesaholdoffsettingbetweentheprior stage and the last stage.
Optional High-speed Serial Protocol Triggering (WR6Zi-80B-8B10B TD)Data Rates 150Mb/s–3Gb/sPattern Length 80-bits,NRZor8b/10bClockRecoveryJitter 1psrms+0.3%UnitIntervalRMSforPRBSdatapatternswith
50%transitiondensityHardwareClockRecoveryLoopBW PLLLoopBW=Fbaud/5500,100Mb/s
to2.488Gb/s(typical)
Color Waveform DisplayType Color12.1"widescreenflatpanelTFT-ActiveMatrixwithhighresolutiontouchscreenResolution WXGA;1280x800pixelsNumberofTraces Displayamaximumof16traces.Simultaneouslydisplaychannel,zoom,memoryandmathtracesGrid Styles Auto,Single,Dual,Quad,Octal,X-Y,Single+X-Y,Dual+X-YWaveform Representation Sample dots joined, or sample dots only
SPECIFICATIONS
17
SPECIFICATIONS
WaveRunner 604Zi 606Zi
WaveRunner 610Zi 620Zi
620 MZi
WaveRunner 625Zi 640Zi
Processor/CPUType Intel®E5300PentiumDualCore2.6GHzorgreaterProcessor Memory 2GBstandard,upto4GBoptionalOperatingSystem MicrosoftWindows®7ForEmbeddedSystems64-BitRealTimeClock Dateandtimedisplayedwithwaveforminhardcopyfiles.SNTPsupporttosynchronizetoprecisioninternalclocks
InterfaceRemoteControl ViaWindowsAutomation,orviaTeledyneLeCroyRemoteCommandSetNetworkCommunicationStandard VXI-11orVICP,LXIClassC(v1.2)CompliantGPIBPort(Optional) SupportsIEEE—488.2(External)
Ethernet Port Supports10/100/1000Base-TEthernetinterface(RJ45port)USB Minimum4total(Including2frontpanel)USB2.0portssupportWindowscompatibledevicesUSBDevicePort 1USBTMCPortExternalMonitorPort 15-pinD-TypeSVGAcompatibleDB-15tosupportcustomer-suppliedexternalmonitor.
IncludessupportforextendeddesktopoperationwithWXGAresolutiononsecondmonitorPeripheralBus TeledyneLeCroyLBUSstandard
Power RequirementsVoltage 100–240VAC±10%at45–66Hz;100–120VAC±10%at380–420Hz;
AutomaticACVoltageSelection;InstallationCategory:300VCATIIPowerConsumption(Nominal) 400W/400VAMaxPowerConsumption 500W/500VA(withallPCperipherals,activeprobesconnected
to4channels,andMSOactive)
EnvironmentalTemperature(Operating) +5°Cto+40°CTemperature(Non-Operating) –20°Cto+60°CHumidity(Operating) 5%to80%relativehumidity(non-condensing)upto+31°C
Upperlimitderatesto50%relativehumidity(Non-condensing)at+40°CHumidity(Non-Operating) 5%to95%relativehumidity(non-condensing)astestedperMIL-PRF-28800FAltitude(Operating) Upto10,000ft.(3,048m)atorbelow+25°CRandomVibration(Operating) 0.31grms5Hzto500Hz,15minutesineachofthreeorthogonalaxesRandomVibration(Non-Operating) 2.4grms5Hzto500Hz,15minutesineachofthreeorthogonalaxesFunctional Shock 30 gpeak,halfsine,11mspulse,3shocks(positiveandnegative)ineachofthreeorthogonalaxes,18shockstotal
Physical DimensionsDimensions(HWD) 11.6929”Hx16.4567”Wx8.937”D(297x418x227mm)Weight 25.4lbs.(11.52kg)Shipping Weight 39lbs.(17.69kg)
CertificationsCECompliant,ULandcULlisted;ConformstoEN61326-1,EN61010-1,UL61010-12ndedition,and CSAC22.2No.61010-1-04
Warranty and Service3-yearwarranty;calibrationrecommendedannually.Optionalserviceprogramsincludeextendedwarranty, upgrades, and calibration services
18
Standard
Math Tools
Displayupto8mathfunctiontraces(F1–F8).Theeasy-to-usegraphical interfacesimplifiessetupofuptotwooperationsoneachfunctiontrace, and function traces can be chained together to perform math-on-math.
absolute valueaverage(summed)average(continuous)correlation (twowaveforms)derivativedeskew(resample)difference(–)enhanced resolution (to11bitsvertical)envelopeexp(basee)
exp(base10)fft(powerspectrum,power average, magnitude, phase, upto128Mpts)floorintegralinterpolate(cubic,quadratic,sinx/x)invert(negate)log(basee)log(base10)
product(x)reciprocalrescale(withunits)roof(sinx)/xsparsesquaresquare rootsum(+)zoom(identity)
Measure Tools
Displayany8parameterstogetherwithstatistics,includingtheir average, high, low, and standard deviations. Histicons provide a fast, dynamic view of parameters and wave shape characteristics. Parameter Math allows addition, subtraction, multiplication, or division of two different parameters.
amplitudeareabasebit ratecyclesdelay∆delayduty cycledurationfalltime(90–10%, 80–20%,@level)frequencyfirstlast
level@xmaximummeanmedianminimumnarrow band phasenarrow band powernumber of points+overshoot– overshootpeak-to-peakperiodrisetime(10–90%, 20–80%,@level)
rmsstd. deviationtopwidthphasetime@minimum(min.)time@maximum(max.)∆time@level∆time@levelfromtriggerx@max.x@min.
Pass/Fail Testing
Simultaneously test multiple parameters against selectable parameter limitsorpre-definedmasks.Passorfailconditionscaninitiateactionsincludingdocumenttolocalornetworkedfiles,e-mailtheimageofthefail-ure,savewaveforms,sendapulseoutatthefrontpanelauxiliaryBNC out-put,or(withtheGPIBoption)sendaGPIBSRQ.
Standard (cont’d)
Basic Jitter and Timing Analysis
Thispackageprovidesjittertimingandanalysisusingtime,frequency, and statistical views for common timing parameters, and also includes other useful tools. Includes:
•“Track”graphsofallparameters,nolimitationofnumber
–Cycle-CycleJitter–N-Cycle–N-Cyclewith
start selection–Frequency@level
–Period@level– Half Period–Width@level–TimeInterval Error@level
– Setup– Hold– Skew–DutyCycle@level–DutyCycleError
• Edge@lvparameter(countsedges)•Histogramsexpandedwith19histogramparametersandupto 2billionevents
•Trend(datalog)ofupto1millionevents•Trackgraphsofallparameters•Persistencehistogram,persistencetrace(mean,range,sigma)
Advanced Customization
Provides capability to create a math function or measurement parameter inMATLAB,Excel,C++,JavaScript,orVisualBasicScript(VBS)formatandinsertitintotheoscilloscope’sprocessingstream.Allresultsarepro-cessed and displayed on the oscilloscope grid, and are available for further processing. Also permits the creation of customized plug-ins that can be insertedintothescopeuserinterface,controlofthescopeviaVisualBasicscriptsembeddedincustomizedfunctions,anduseofTeledyneLeCroy’sCustomDSOcapabilities.
Software Options
SDA II Serial Data Analysis Option (WR6Zi-SDAII)
Total Jitter
A complete toolset is provided to measure total jitter. Eye Diagrams with millionsofUIarequicklycalculatedfromupto128Mptsrecords,and advancedtoolsmaybeusedontheEyeDiagramtoaidanalysis.CompleteTIEandTotalJitter(Tj)parametersandanalysisfunctionsareprovided.•TimeIntervalError(TIE)MeasurementParameter,Histogram, SpectrumandJitterTrack
•TotalJitter(Tj)MeasurementParameter,Histogram,Spectrum•EyeDiagramDisplay(sliced)•EyeDiagramIsoBER(linesofconstantBitErrorRate)• Eye Diagram Mask Violation Locator• Eye Diagram Measurement Parameters
– Eye Height–OneLevel–ZeroLevel– Eye Amplitude
– Eye Width–EyeCrossing– Avg. Power–ExtinctionRatio
– Mask hits– Mask out–BitErrorRate– Slice Width (setting)
• Q-FitTailRepresentation• BathtubCurve• CumulativeDensityFunction(CDF)• PLLTrack
SPECIFICATIONS
19
Software Options (cont’d)
SDA II Serial Data Analysis Option (WR6Zi-SDAII) - continued
Jitter Decomposition Models Twojitterdecompositionmethodsareprovidedandsimultaneouslycalculatedtoprovidemaximummeasurementconfidence.Q-Scale, CDF,BathtubCurve,andalljitterdecompositionmeasurement parameters can be displayed using either method.
• Spectral Method • NQ-Scale MethodRandom Jitter (Rj) and Non-Data Dependent Jitter (Rj+BUj) • RandomJitter(Rj)MeasurementParameter • Rj+BUjHistogram • Rj+BUjSpectrum • Rj+BUjTrackDeterministic Jitter (Dj) • DeterministicJitter(Dj)MeasurementParameterData Dependent Jitter (DDj) • DataDependentJitter(DDj)MeasurementParameter • DDj Histogram • DDjPlot(byPatternorN-bitSequence)
Eye Doctor II Advanced Signal Integrity Tools (WM8Zi-EYEDRII)
Completesetofchannelemulation,de-embeddingandreceiverequaliza-tion simulation tools. Provides capability to emulate a serial data link, de-embedorembedafixture,cableorserialdatachannel,addorremoveemphasis,andperformCTLE,FFE,orDFEequalization.IfpurchasedwithSDAIII, then capabilities are accessed from within the SDAIII-Complete-LinQ user interface framework.
Power Analyzer Option (WR6Zi-PWR)
Power switching device measurements, control loop modulation analysis, andlinepowerharmonictestingareallsimplifiedwithadedicateduserinterface and automatic measurements.Device Analysis • Losses – Automatic measurement of turn-on, turn-off, and conduction loses as well as off-state power, total losses and switching frequency • SafeOperatingArea • B-H-HysteresisCurve • DynamicOn-Resistance • Dv/dtanddi/vtControl Loop Analysis • Closedlooptime-domain–Dutycycle,width,periodorfrequencyLine Power Analysis • Power – Vrms, Irms, real-power, apparent power, power factor, crest factor • Harmonics–EN61000-3-2pre-compliance,TotalHarmonicDistortionMeasurement Setup • ControlsforDeskew,DCfineadjust,probeintegration,devicezoneidentification
Cable De-embedding Option (WR6Zi-CBL-DE-EMBED)
Removes cable effects from your measurements. Simply enter the S-parametersorattenuationdataofthecable(s)thenallofthefunctionalityoftheWR6Zicanbeutilizedwithcableeffectsde-embedded.
8b/10b Decode and 80-bit High Speed Serial Trigger Option (WR6Zi-80B-8B10B TD)
Intuitive, color-coded serial trigger decode with powerful search capability en-ablescapturedwaveformstobesearchedforuser-definedsequences of symbols. Multi-lane analysis decodes up to four simultaneously capturedlanes.Includes150Mb/sto3.125Gb/sHigh-speed80-bitSerialPatternTriggerOption
Software Options (cont’d)
Serial Data Mask Option (WR6Zi-SDM)
Createeyediagramsusingacomprehensivelistofstandardeyepatternmasks,orcreateauser-definedmask.Maskviolationsareclearlymarkedon the display for easy analysis.
Electrical Telecom Pulse Mask Test Option (WR6Zi-ET-PMT)
Performs automated compliance mask tests on a wide range of electrical telecom standards.
Spectrum Analyzer Option (WR6Zi-SPECTRUM)
SpectrumanalyzerstyleuserinterfaceandadvancedFFTcapabilities. •Automaticoscilloscopesetupwhenselectingstart/stopfrequencyor
center frequency and span• Resolution bandwidth automatically or manually controlled•FFTReferenceandverticalscaleindBm,dBV,dBmV,dBuV,VrmsorArms•Spectrogramprovides2Dor3Dspectralhistorydisplay•Upto100automaticpeakmarkers•Upto20markers,eithermanuallycontrolledorautomaticwhichmark
fundamental frequency and harmonics• Math waveform analysis, additional output types:
– Power density – Real – Imaginary – Magnitude squared
Disk Drive Measurements Option (WR6Zi-DDM2)
Thispackageprovidesdiskdriveparametermeasurementsandrelated mathematical functions for performing disk drive WaveShape Analysis.• Disk Drive Parameters are as follows:
– amplitude asymetry
– local base– local baseline
separation– localmaximum– local minimum– local number– local peak-peak– local time
between events– local time
between peaks– local time
between troughs
– local time at minimum
– local time atmaximum
– local time peak-trough
– local time over threshold
– local time trough-peak
– local time under threshold
– narrow band phase– narrow band power
– overwrite– pulsewidth50– pulsewidth50–– pulsewidth50+– resolution– track average
amplitude– track average
amplitude –– track average amplitude+
– auto-correlations/n– non-linear
transition shift
SPECIFICATIONS
20
ORDERING INFORMATION
Product Description Product Code
WaveRunner 6 Zi Series Oscilloscopes400MHz,10GS/s,4Ch,16Mpts/ChDSOwith12.1"WXGAColorDisplay.50Ωand1MΩInput20GS/sand 32Mpts/ChinInterleavedMode
WaveRunner604Zi
600MHz,10GS/s,4Ch,16Mpts/ChDSOwith12.1"WXGAColorDisplay.50Ωand1MΩ Input 20GS/sand 32Mpts/ChinInterleavedMode
WaveRunner606Zi
1GHz,10GS/s,4Ch,16Mpts/ChDSOwith12.1"WXGAColorDisplay.50Ω and1MΩInput20GS/sand 32Mpts/ChinInterleavedMode
WaveRunner610Zi
2GHz,10GS/s,4Ch,16Mpts/ChDSOwith12.1"WXGAColorDisplay.50Ω and1MΩInput20GS/sand 32Mpts/ChinInterleavedMode
WaveRunner620Zi
2GHz,20GS/s,4Ch,64Mpts/ChDSOwith12.1”WXGAColorDisplay.50Ω and1MΩInput20GS/sand 128Mpts/ChinInterleavedMode
WaveRunner620MZi
2.5GHz,20GS/s,4Ch,16Mpts/ChDSOwith12.1"WXGAColorDisplay.50Ωand1MΩInput40GS/sand 32Mpts/ChinInterleavedMode
WaveRunner625Zi
4GHz,20GS/s,4Ch,16Mpts/ChDSOwith12.1"WXGAColorDisplay.50Ω and1MΩInput40GS/sand 32Mpts/ChinInterleavedMode
WaveRunner640Zi
Included with Standard Configuration÷10,500MHzPassiveProbe(Qty.4)Optical3-buttonWheelMouse,USB2.0Printed Quick Reference GuidePrinted Getting Started ManualProduct Manual in PDF Format on Oscilloscope DesktopAnti-virusSoftware(TrialVersion)MicrosoftWindows®7ForEmbeddedSystems64-BitCommercialNISTTraceableCalibrationwithCertificatePowerCablefortheDestinationCountry3-year Warranty
Oscilloscope Synchronization8ChannelSimultaneousAcquisition- CaptureandTransferWaveforms BetweenTwoWR6ZiOscilloscopes
WR6ZI-8CH-SYNCH
Product Description Product Code
Memory Options32Mpts/Ch(64Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR604Zi-S-32
32Mpts/Ch(64Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR606Zi-S-32
32Mpts/Ch(64Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR610Zi-S-32
32Mpts/Ch(64Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR620Zi-S-32
32Mpts/Ch(64Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR625Zi-S-32
32Mpts/Ch(64Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR640Zi-S-32
64Mpts/Ch(128Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR604Zi-M-64
64Mpts/Ch(128Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR606Zi-M-64
64Mpts/Ch(128Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR610Zi-M-64
64Mpts/Ch(128Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR620Zi-M-64
64Mpts/Ch(128Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR625Zi-M-64
64Mpts/Ch(128Mpts/ChInterleaved) StandardMemory.Includes4GB of RAM
WR640Zi-M-64
Memory and Sample Rate Options20GS/s(40GS/sInterleaved) SamplingRateOption
WR610Zi-STD-4x20GS
32Mpts/Ch(64Mpts/ChInterleaved)StandardMemory.Includes4GBofRAM.20GS/s(40GS/sInterleaved)SamplingRateOption
WR610Zi-S-32-4x20GS
64Mpts/Ch(128Mpts/ChInterleaved)StandardMemory.Includes4GBofRAM.20GS/s(40GS/sInterleaved)SamplingRateOption
WR610Zi-M-64-4x20GS
20GS/s(40GS/sInterleaved) SamplingRateOption
WR620Zi-STD-4x20GS
32Mpts/Ch(64Mpts/ChInterleaved)StandardMemory.Includes4GBofRAM.20GS/s(40GS/sInterleaved)SamplingRateOption
WR620Zi-S-32-4x20GS
64Mpts/Ch(128Mpts/ChInterleaved)StandardMemory.Includes4GBofRAM.20GS/s(40GS/sInterleaved)SamplingRateOption
WR620Zi-M-64-4x20GS
21
ORDERING INFORMATION
Product Description Product Code
Computer UpgradeUpgradeFrom2GBRAMto4GBRAM WR6Zi-UPG-4GBRAMRemovableHardDriveOption WR6Zi-500GB-RHDAdditional500GBHardDrive forUseWithRHDOption.IncludesWin-dows7ProforEmbedded SystemsOS,TeledyneLeCroy OscilloscopeSoftwareandCriticalScopeOperationalFileDuplicates
WR6Zi-500GB-RHD-02
Serial Trigger and DecodeMIL-STD-1553Triggerand DecodeOption
WR6Zi-1553TD
MIL-STD-1553Trigger,Decode,Measure/Graph,andEyeDiagramOption
WR6ZI-1553TDME
8b/10bTriggerandDecodeOption WR6Zi-80B-8B10BTDARINC429BusSymbolicDecode,Measure/Graph,andEyeDiagramOption
WR6Zi-ARINC429BUSDMESYMBOLIC
ARINC429BusSymbolic DecodeOption
WR6Zi-ARINCbusDSYMBOLIC
AudiobusTriggerandDecodefor I2S,OptionLJ,RJ,andTDM
WR6Zi-AudiobusTD
AudiobusTrigger,Decode,andGraphOptionforI2S,LJ,RJ,andTDM
WR6Zi-AudiobusTDG
CANbusFDTriggerand DecodeOption
WR6Zi-CANFDbusTD
CANFDTrigger,Decode,Measure/Graph,andEyeDiagramOption
WR6Zi-CANFDBUSTDME
CANFDSymbolicTrigger, Decode,andMeasure/Graph,andEyeDiagramOption
WR6Zi-CANFDBUSTDMESYMBOLIC
CANbusTDTriggerand DecodeOption
WR6Zi-CANbusTD
CANTrigger,Decode,Measure/Graph,andEyeDiagramOption
WR6ZI-CANBUSTDME
CANSymbolicTrigger,Decode,andMeasure/Graph,andEyeDiagramOption
WR6ZI-CANBUSTDMESYMBOLIC
DigRF3GDecodeOption WR6Zi-DigRF3GbusDDigRFv4DecodeOption WR6Zi-DigRFv4busDMIPID-PHYDecodeOption WR6Zi-DPHYbusDMIPI D-PHY Decode and Physical Layer TestOption
WR6Zi-DPHYbusDP
I2C,SPI,UART-RS232TriggerandDecodeBundle WR6ZI-EMBTDI2C,SPI,UART-RS232Trigger,Decode,Measure/Graph,andEyeDiagramBundle
WR6ZI-EMBTDME
ENETDecodeOption WR6ZI-ENETbusDFibreChannelDecode AnnotationOption
WR6Zi-FCbusD
Product Description Product Code
Serial Trigger and Decode (cont’d)FlexRayTriggerandDecodeOption WR6Zi-FlexRaybusTDFlexRayTrigger,Decode,Measure/GraphandPhysicalLayerOption
WR6ZI-FLEXRAYBUSTDMP
I2CBusTriggerandDecodeOption† WR6Zi-I2CbusTDI2CTrigger,Decode,Measure/Graph,andEyeDiagramOption
WR6ZI-I2CBUSTDME
LINTriggerandDecodeOption WR6Zi-LINbusTDLINTrigger,Decode,Measure/Graph,andEyeDiagramOption
WR6ZI-LINBUSTDME
ManchesterDecodeOption WR6ZI-ManchesterbusDMDIODecodeOption WR6Zi-MDIObusDMIPIM-PHYDecodeOption WR6Zi-MPHYbusDMIPI M-PHY Decode and Physical Layer TestOption
WR6Zi-MPHYbusDP
MS-500-36withI2C,SPI,UARTand RS-232TriggerandDecodesBundle
WR6ZI-MSO-EMBTD
MS-500-36withI2C,SPI,UART-RS-232Trig,Decode,Measure/Graphand EyeBundle
WR6ZI-MSO-EMBTDME
NRZDecodeOption WR6ZI-NRZbusDPCIExpressGen1DecodeOption WR6Zi-PCIebusDPROTObusMAGSerialDebugToolkit WR6Zi-PROTObusMAGDecode Annotation and Protocol Analyzer Synchronization SoftwareOption
WR6Zi-ProtoSync
Decode Annotation and Protocol Analyzer+BitTracerSWSynchroniza-tionOption
WR6Zi-PROTOSYNC-BT
SASDecodeAnnotationOption WR6Zi-SASbusDSATATriggerDecodeAnnotation OptionSupportsSATAGen1and2
WR6Zi-SATAbusTD
SENTBusDecodeOption WR6Zi-SENTbusDSpaceWireDecodeOption WR6Zi-SpaceWirebusDSPIBusTriggerandDecodeOption† WR6Zi-SPIbusTDSPITrigger,Decode,Measure/Graph,andEyeDiagramOption
WR6ZI-SPIBUSTDME
SPMIDecodeOption WR6Zi-SPMIbusDUARTandRS-232Triggerand DecodeOption†
WR6Zi-UART-RS232busTD
UART-RS232Trigger,Decode, Measure/Graph,andEyeDiagramOption
WR6ZI-UART-RS232BUSTDME
MIPIUniProProtocolDecoder WR6ZI-UNIPRObusDUSB2-HSICDecodeOption WR6Zi-USB2-HSICbusDUSB1.x/2.0Trigger/DecodeOption WR6Zi-USB2busTDUSB2.0Trigger,Decode,Measure/Graph,andEyeDiagramOption
WR6ZI-USB2BUSTDME
† Included with WaveRunner 620MZi
22
Product Description Product Code
Serial Data ComplianceQualiPHYEnabledBroadR-Reach SoftwareOption
QPHY-BroadR-Reach
QualiPHYEnabledMOST50ePHYComplianceSoftwareOption.RequiresoptionsDFP2andSDMorSDA2
QPHY-MOST50
QualiPHYMOST150oPHYandcPHYComplianceSoftwareOption.RequiresoptionsDFP2andSDMorSDA2
QPHY-MOST150
QualiPHY Enabled Ethernet 10/100/1000BTSoftwareOption
QPHY-ENET*
QualiPHYEnabledDDR2 SoftwareOption
QPHY-DDR2
QualiPHY Enabled DDR3 SoftwareOption
QPHY-DDR3
QualiPHYEnabledLPDDR2 SoftwareOption
QPHY-LPDDR2
QualiPHY Enabled MIPI D-PHY SoftwareOption
QPHY-MIPI-DPHY
QualiPHYEnabledMOST150 SoftwareOption
QPHY-MOST150
QualiPHYEnabledMOST50 SoftwareOption
QPHY-MOST50
QualiPHYEnabledUSB2.0 SoftwareOption
QPHY-USB‡
10/100/1000Base-TEthernet TestFixture
TF-ENET-B**
USB2.0ComplianceTestFixture TF-USB-B*TF-ENET-Brequired.‡TF-USB-Brequired. **IncludesENET-2CAB-SMA018andENET-2ADA-BNCSMA.
Serial Data AnalysisCableDe-EmbeddingOption WR6Zi-CBL-DE-EMBEDEyeDoctor(VirtualProbeand EqualizerEmulationBundle), Serial Data Analyzers, and Disk Drive Analyzers
WR6Zi-EYEDRII
SerialDataMaskSoftwareOption WR6Zi-SDMSDAIISerialDataAnalysisOption WR6ZI-SDAII
DDR Debug TookitsDDR2andLPDDR2DebugToolkit WR6ZI-DDR2-TOOLKITDDR3,DDR3L,LPDDR3,DDR2,andLPDDR2DebugToolkit
WR6Zi-DDR3-TOOLKIT
DDR3,DDR3L,LPDDR3,DDR2,andLPDDR2DebugToolkitUpgrade
WR6Zi-UPG-DDR3-TOOLKIT
Product Description Product Code
Mixed Signal Solutions18channelQuickLinkleadsetforHDA125
HDA-DLS-18QL
9channelQuickLinkleadsetforHDA125
HDA-DLS-09QL
250MHz,1GS/s,18Ch,10Mpts/ChMixedSignalOscilloscopeOption
MS-250
500MHz,2GS/s,18Ch,50Mpts/ChMixedSignalOscilloscopeOption
MS-500
250MHz,1GS/s,36Ch,25Mpts/Ch(500MHz,18Ch,2GS/s,50Mpts/ChInterleaved)MixedSignal OscilloscopeOption
MS-500-36
Data Storage SoftwareAdvancedOpticalRecording MeasurementOption
WR6Zi-AORM
Disk Drive Measurements SoftwareOption
WR6Zi-DDM2
DiskDriveAnalyzerSoftwareOption WR6Zi-DDA
Power Analysis SoftwarePowerAnalyzerSoftwareOption WR6Zi-PWR
Jitter Analysis SoftwareClockJitterAnalysiswithFourViewsSoftwareOption
WR6Zi-JITKIT
Spectrum Analysis SoftwareSpectrumAnalyzerOption (IncludedwithWaveRunner620MZi)
WR6Zi-SPECTRUM
Other Software OptionsVectorLinQ Vector Signal Analysis WR6Zi-VECTORLINQAdvancedCustomizationOption (IncludedwithWaveRunner620MZi)
WR6Zi-XDEV
EMCPulseParameter SoftwareOption
WR6Zi-EMC
ElectricalTelecomMaskTest SoftwareOption
WR6Zi-ET-PMT
Digital Filtering SoftwareDigitalFilterSoftwareOption (IncludedwithWaveRunner620MZi)
WR6Zi-DFP2
Remote Control/Network OptionsExternalUSB2toGPIBAdaptor USB2-GPIB
ORDERING INFORMATION
23
Product Description Product Code
General Accessories OscilloscopeCartwith Additional Shelf and Drawer
OC1024-A
OscilloscopeCart OC1021-AAccessory Pouch WR6Zi-POUCHRackmount,8UAdaptorKit WR6ZI-RACKKeyboard,USB KYBD-1MILCalibrationCertification WR6Zi-CCMILSoftCarryingCase WR6Zi-SOFTCASEProtectiveHardCover WR6Zi-COVERHardCase WR6Zi-HARDCASEExternalAdaptorforReferenceInandOut(TobeappliedattheLbus Connector)
WR6Zi-ExtRef-IN/OUT
ProbesPower/VoltageRailProbe4GHz,1.2x,±30Voffset,±800mVdynamicrange
RP4030
HighVoltageFiberOpticProbe,60MHzBandwidth. HVFO103÷10,500MHz10MΩ Passive Probe PP009÷10,500MHz10MΩ Passive Probe PP008÷10,500MHzPassiveProbe,2.5mm,10MΩ PP022÷10,500MHzPassiveProbe,5mm,10MΩ PP0241GHz,0.9pF,1MΩ High Impedance Active Probe
ZS1000
Setof4ZS1000,1GHz,0.9pF, 1MΩ High Impedance Active Probe
ZS1000-QUADPAK
1.5GHz,0.9pF,1MΩ High Impedance Active Probe
ZS1500
Setof4ZS1500,1.5GHz,0.9pF, 1MΩ High Impedance Active Probe
ZS1500-QUADPAK
2.5GHz,0.9pF,1MΩ High Impedance Active Probe
ZS2500
Setof4ZS2500,2.5GHz,0.9pF, 1MΩ High Impedance Active Probe
ZS2500-QUADPAK
4GHz,0.6pF,1MΩ High Impedance Active Probe
ZS4000
200MHz,3.5pF,1MΩ Active Differential Probe
ZD200
500MHz,1.0pF,1MΩ Active Differential Probe
ZD500
1GHz,1.0pF,1MΩ Active Differential Probe
ZD1000
1.5GHz,1.0pF,1MΩ Active Differential Probe
ZD1500
WaveLink4GHz,2.5Vp-pDifferentialProbeSystem D410-A-PSWaveLink4GHz,5Vp-pDifferentialProbeSystem D420-A-PSWaveLink6GHz,2.5Vp-pDifferentialProbeSystem D610-A-PSWaveLink6GHz,5Vp-pDifferentialProbeSystem D620-A-PSWaveLink4GHzDifferentialAmplifierModulewithAdjustableTip
D400A-AT*
WaveLink6GHzDifferentialAmplifierModulewithAdjustableTip
D600A-AT*
WaveLinkProBusPlatform/Cable Assembly(4GHz)
WL-PBus-CASE
*Foracompleteprobe,orderaWL-PBUS-CASEPlatform/CableAssembly withtheAdjustableTipModule
Product Description Product Code
Probes (cont’d)25MHzHighVoltageDifferentialProbe HVD31021kV,25MHzHighVoltageDifferentialProbe without tip Accessories
HVD3102-NOACC
120MHzHighVoltageDifferentialProbe HVD31061kV,120MHzHighVoltageDifferentialProbe without tip Accessories
HVD3106-NOACC
2kV,120MHzHighVoltageDifferentialProbe HVD32062kV,80MHzHighVoltageDifferentialProbewith 6mcable
HVD3206-6M
6kV,100MHzHighVoltageDifferentialProbe HVD36051Ch,100MHzDifferentialAmplifierwith Precision Voltage Source
DA1855A
DA1855AwithRackmount DA1855A-RM2Ch,100MHzDifferentialAmplifierwith Precision Voltage Source
DA1855A-PR2
DA1855AwithRackmount (mustbeorderedattimeof purchase,noretrofit)
DA1855A-PR2-RM
30A;50MHzCurrentProbe– AC/DC;30Arms;50Apeak Pulse
CP030
30A,50MHzHighSensitivityCurrentProbe-AC/DC,30Arms,50APeakPulse,1.5metercable
CP030A
30A;100MHzCurrentProbe– AC/DC;30Arms;50Apeak Pulse
CP031
30A,100MHzHighSensitivityCurrentProbe-AC/DC,30Arms,50APeakPulse,1.5metercable
CP031A
150A;10MHzCurrentProbe– AC/DC;150Arms;500Apeak Pulse
CP150
500A;2MHzCurrentProbe– AC/DC;500Arms;700Apeak Pulse
CP500
ProgrammableCurrentSensortoPro-BusAdapterforusewiththirdpartycurrent sensors
CA10
Setof4CA10ProgrammableCurrentSensortoProBusAdaptersfor third-party current sensors
CA10-QUADPAK
TekProbetoProBusProbeAdapter TPA10Setof4TPA10TekProbetoProBusProbe Adapters. Includes soft carrying case.
TPA10-QUADPAK
700V,15MHzHigh-Voltage DifferentialProbe(÷10,÷100)
AP031
100:1400MHz50MΩ1kVHigh-voltage Probe
HVP120
100:1400MHz50MΩ 4 kV High-Voltage Probe
PPE4KV
1000:1400MHz50MΩ5kV High-Voltage Probe
PPE5KV
1000:1400MHz5MΩ / 50MΩ6kV High-Voltage Probe
PPE6KV
Optical-to-ElectricalConverter, 500-870nmProBusBNCConnector
OE425
Optical-to-ElectricalConverter, 950-1630nmProBusBNCConnector
OE455
ORDERING INFORMATION
©2017byTeledyneLeCroy,Inc.Allrightsreserved.Specifications,prices,availability,anddeliverysubjecttochangewithoutnotice. Product or brand names are trademarks or requested trademarks of their respective holders. PCIExpress®isaregisteredtrademarkand/orservicemarkofPCI-SIG.MATLAB®isaregisteredtrademarkofTheMathWorks,Inc.Allotherproductorbrandnamesaretrademarksorrequestedtrademarks of their respective holders.
waverunner6zi-ds-23feb17
Local sales offices are located throughout the world. Visit our website to find the most convenient location.
1-800-5-LeCroy teledynelecroy.com
top related