waterinthepaperindustry - · pdf file12 professionalpapermaking2/2014 water/wastewater...
Post on 30-Jan-2018
222 Views
Preview:
TRANSCRIPT
Current water consumption levelsIn theearly stagesof industrialpapermaking,paperwasproducedwith
high specific water consumption. The paper industry has improved its
processes in the last fewdecades for economic and ecological reasons
and, as a result, has been able to reduce its water consumption signif-
icantly. This was only possible because of the increasing closure of
in-mill water circuits and consistent reuse of clarified process water by
former fresh water consumers.
AsurveyconductedbyPapiertechnischeStiftung (PTS)andtheGerman
Pulp and Paper Association (VDP) showed that the average specific
effluent volumeofGermany’s pulp andpaper industry decreased from
46 to9 l/kgofproductproducedbetween the1970’s and today (Fig.1).
Nevertheless, thepaper industry remainsoneof thebiggestconsumers
of industrial water.
Water in the Paper IndustryCurrent situation and future options
Paper is a commodity product and it is still hard to
imagine a world without it. Water is one of the key
components of papermaking. Without water, the
production of paper is unthinkable. Being one of the
most important industrial water consumers, paper
producers were challenged to reduce their impact on
water resources in the past decades. Competent
decision making by top managers and well trained and
motivated staff delivered substantial progress in
reducing the water consumption in paper mills. Due to
its high competence in closing water circuits the paper
industry nowadays counts among the most advanced
industrial sectors regarding water efficiency. In the
following sections the current situation and future
options will be illustrated.
Water is of central importance for the production of paper: no water, no paper
WATER/WASTE WATER
Authors: Holger Jung und Dr. Johannes Kappen, Papiertechnische Stiftung (PTS), München/Germany
Fig. 1: Averaged specific effluent volume in the German paper industry 1
Fig. 2: Grade specific effluent volume in the German paper industry 1
Bild: RedHelga – istockhoto.com
2/2014 Professional Papermaking 11
SGRD
12 Professional Papermaking 2/2014
WATER/WASTE WATER
The consumption levels can vary from mill to mill because of both
general andprocess-related reasons such as rawmaterials used, paper
grades produced, and plant structure. Furthermore, local boundary
conditions, such as requirements on waste water discharge, have an
impact on the consumption level. High specific effluent volumes occur
particularly in the production of specialty paper grades (Fig. 2).
These mills are often faced with structural handicaps that cause in-
creased specific effluent volumes: small paper machines, low produc-
tion rates, frequentgradechanges, andoftenveryhighquality require-
ments on the final product. The lowest water requirements can be
found inmills that producepackagingpapers, suchas corrugatedbase
paper or board. Some of these mills have already managed to close
their water circuits completely, resulting in a zero effluent production.
Fresh water useDependingontheavailabilityand local conditions,either surfacewater
orgroundwater isusedas freshwater for theprocess.Drinkingwater is
normally only used for certain purposes, such as trim squirts.
In theGerman paper industry, roughly 70%of the freshwater is taken
from surfacewaters 1. In state-of-the-art mills, there are only few fresh
water consumers. In viewof the limited freshwater volumeavailable, it
must be used efficiently. Hence, freshwater used for cooling purposes
should be collected and reused as warm water in the process.
Typically, the highest share (approx. 40–50%) of the entire freshwater
volume is used for high and lowpressure showers in thewire andpress
section.Other freshwater consumersare forexample sealingwater for
liquid-ring vacuum pumps and packing glands, and the make-up of
additives. Processwater should be used for all other purposes, such as
stock dilution, consistency control, or cleaning.
Limits of water savingWhen reducing the specific effluent volume some typical limits have to
be considered (Fig. 3): the fresh water volume that is used for cooling
prior to its final use (2), the water volume that is discharged with the
rejects (3) and themaximumCODvalue that theproduct can tolerate in
the white water (4).
In a selected circuit, this value also corresponds to aminimumeffluent
volume for the systemconcerned. Theabove-mentioned limitsdiffer in
every individual system. The factors that influence these limits include
the existing plant technology, raw materials used, and paper grades
produced.
Lowspecific effluent volumes result ingrowing system loads inprocess
waters in terms of dissolved and colloidal materials (Fig. 4) that can
cause severe losses in quality and productivity. This situation is aggra-
vated by the use of paper for recycling as raw material.
If the specific effluent volume is to be reduced successfully, the impact
of suchmeasures on the papermaking processmust also be taken into
consideration. Loop separation and counter current arrangement en-
able the paper mills to reduce the transfer of detrimental substances
coming from highly loaded loops (e.g. stock preparation) into sub-
sequent process steps, thus relieving the paper machine loop.
Although, the increasing closure of water loops involves many
problems, it is bound to be part of the paper industry’s future de-
velopment. Only if the goal of preventing effluent production and the
goal of reliable production and satisfactory product quality are recon-
ciled can the narrowing and ultimate closure of water circuits become
reality.
Milestones in water reuseSeveral paper mills producing packaging grades from paper for recy-
cling run their processes in a closed water circuit. However, a further
reduction in effluent volume is often prevented by the above men-
tioned enrichment of detrimental substances and its consequences.
To further decrease thewater demand in the paper industry it is neces-
sary to overcome the current obstacles (e.g. scaling and fouling) to the
implementation of advanced water treatment technologies enabling
the mills to reduce the amount of dissolved substances in the process
water.
Smurfit Kappa Zülpich Papier GmbH, Zülpich/Germany, has pioneered
the biological treatment of process water in a closed water circuit.
Forced by increasing amounts of odorous compounds in its water
loops, the company decided to install an integrated biological treat-
ment plant consisting of an anaerobic and an aerobic stage in the
1990’s. Several other installations followed. This example shows also
how much effort it takes to achieve circuit closure.
But there are also more recent examples of a successful further reduc-
tion in effluent volume. Membrane treatment is evolving into a key
technology as it is enabling themills to reduce also the inorganic load.
The world’s first installation of a membrane bioreactor with subse-
quent reverseosmosis inapapermill canbe foundatKoehlerPappen,a
cardboard mill in Germany.
Holmen Paper uses a combination of membrane technology and UV
disinfection at its mill in Madrid for the final treatment of municipal
wastewater which is replacing the complete freshwater volume used
in the papermaking process. Besides these examples there are several
furtherusesofmembrane technology in thepaper industryopeningup
a huge field of applications.
Fig. 3: Limits in reducing the specific effluent volume 2
Fig. 4: Chemical oxygen demand (COD) concentration in white water 1 of European papermills producing corrugated base paper as a function of the specific effluent volume 2
SGRD
2/2014 Professional Papermaking 13
WATER/WASTE WATER
Waste water treatmentMostmills areunable toproduce inaclosedwater circuit.Normally, the
arising wastewater is nowadays treated fully biologically in on-site or
municipal waste water treatment plants. In Germany more than 90%
of the paper is produced inmills treating their wastewater in a biolog-
ical waste water treatment plant (Fig. 5).
The paper industry uses a variety of effluent treatment systems. The pre-
ferredprocess combination foreach individual casedependson thegrade-
specific quality of the effluent that is to be treated. Experience shows that
multistage processes based on aerobic–aerobic or anaerobic–aerobic
principles enable a significantly more reliable operation of the plant.
Future challengesThe pressure on the paper industry to further narrow its water circuits
has increased significantly during the past decades, although approx.
90% of the mill’s water intake is returned to its source. Growing
attention to water scarcity and pollution results in new legislative
directives, forcing industries to reduce their water use and pollution,
and motivating them to implement innovations and carefully observe
the impact of measures.
Since the technologies of the past can no longer meet the require-
mentsof the future, saving freshwateror lowering theorganic loadsof
effluents requires the increasing use of innovative internal and/or ex-
ternal treatment technologies and concepts (Fig. 6).
Initiated by the Confederation of European Paper Industries (CEPI) the
goal of an 80% reduction in CO2 emissions has been set within the
so-called“Roadmap2050”.Watermanagementandwastewater treat-
ment have to contribute to achieving this goal. Hence, the paper indus-
try is facedwithgreat challengesandhas toperformthebalancingactof
safeguarding the day-to-day businesswhilstmaking a big step forward.
Outlook – future optionsWhy is waste water treatment always associated with costs? Waste
water ismore thanwater. It contains an appreciable amount of energy
– chemically bound and thermal. Heat recovery and anaerobic treat-
ment are first steps towards an energetically self-sufficient waste wa-
ter treatment. Exploiting the potential energy – caused by differences
in vertical height – for power production can furthermore be anoption
for some mills.
However, that is not enough: low-energy processes like the use of
algae are in development and waiting for implementation, respec-
tively. One future option could be the power production from waste
water by means of microbial fuel cells.
Reclaiming valuable materials from effluents is a further challenge to
ensure the future of the paper industry. Besides for water treatment,
membrane processes can also be used for reclaiming valuable materi-
als from effluents. Several different processes are currently under de-
velopment. But most of their technological and economic benefits
have yet to be studied.
Important developments are needed to improve the reliability of the
treatment technologies and their adaptation to themill’s specific proc-
ess conditions; first attempts have already been made.
Further resource saving options might be tapped by using industrial
symbiosis, by integrating of the urban surroundings and by establishing
biorefinery pathways. On the way to integrated paper production sites,
obstacles like communication problems have to be overcome, and para-
digm changes and substantial R&D work must be performed. But the
opportunities are striking: industrial symbiosis and biorefinery concepts
can save a great deal of costs and open up newmarkets. Pulp and paper
mills are perfectly qualified to play a key role in this bio-based economy.
A vision for the future ofwastewater treatment is a process integrated
biological reactor which produces energy and valuable by-products
whilst cleaning the waste water and is therefore a big step forward
towards achieving the CEPI roadmap goals.
Partner on the way to sustainable water managementThe shortage of resources results in high costs. In addition, there is
great societal pressure to act in a sustainable manner. Stewardship of
available water enables papermills to increase their production. As an
internationally linked research centere, PTS (Papiertechnische Stiftung
–PaperTechnologyFoundation),Munich/Germany, is the ideal partner
for companies wishing to achieve sustainable water management. Its
research objectives are tuned to the needs of industry who take an
active role in planning and conducting the projects.
Together with its customers, PTS develops environmentally-friendly,
sustainable products and processes. PTS assists its customers with
operative tasks of their daily business – neutrally and confidentially.
This includes the fast and reliable identification of problem causes as
well as the development of effective countermeasures.
References1 Jung, H.; Kappen, J.; Hesse , A.; Götz, B.: (2014) Wasserumfrage 2013, Wochenblatt für
Papierfabrikation, 9/2014 p. 537-5392 Jung H.; Pauly, D.: Water in the Pulp and Paper Industry. In: P. Wilderer (ed.) Treatise on Water
Science, vol. 4, pp. 667–684 Oxford: Academic Press (2011)
Fig. 5: Waste water discharge in the German paper industry in relation to production volume 1
Fig. 6: The road towards resource efficient and sustainable processes in the paper industry
SGRD
top related