volumetric flasks - dacchim...volumetric flask base area. volumetric flasks of standard body shape...
Post on 28-Oct-2020
21 Views
Preview:
TRANSCRIPT
Manufactured from borosilicate glass 3.3 which isresistant to heat and almost all chemicals.
They meet the highest quality standards according toDIN EN 1042 and DIN 12664.
Individually calibrated through automatic calibrationprocess carried out by robots.
Permanent quality control through all steps eliminatepossible deviations from nominal values.
Calibrated to contain (In) and all the tolerances areaccording to DIN/ISO Class “A” standards.
Conformity (“H”) certified, with a batch numberprinted on the body.
Batch certificate can be downloaded from our website.
Inscriptions are printed either with blue enamel oramber stain diffusion ink.
Diamond grinded meniscus ring mark is for longerpersistance.
They are supplied with polyethylene stopper.
class “A”volumetric flasks
clear
tolerance neck sizequantityin boxvolume
1 ml2 ml3 ml4 ml5 ml5 ml
10 ml20 ml25 ml25 ml50 ml50 ml
100 ml100 ml150 ml200 ml250 ml300 ml400 ml500 ml
1000 ml2000 ml5000 ml
10000 ml
standard bodyblue scale
standard bodyamber scale
neck innerdiameter
approximateheight
trapezoidal bodyblue scale
013.01.005013.01.010013.01.020013.01.025013.01.026013.01.050013.01.051013.01.100013.01.101013.01.150013.01.200013.01.250013.01.300013.01.400013.01.500013.01.901013.01.902013.01.905013.01.910
013.03.005013.03.010013.03.020013.03.025013.03.026013.03.050013.03.051013.03.100013.03.101013.03.150013.03.200013.03.250013.03.300013.03.400013.03.500013.03.901013.03.902013.03.905013.03.910
± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.040 ml± 0.040 ml± 0.040 ml± 0.060 ml± 0.060 ml± 0.100 ml± 0.100 ml± 0.150 ml± 0.150 ml± 0.150 ml± 0.200 ml± 0.200 ml± 0.250 ml± 0.400 ml± 0.600 ml± 1.200 ml± 2.000 ml
NS 07/16NS 07/16NS 07/16NS 07/16NS 07/16NS 10/19NS 10/19NS 10/19NS 10/19NS 12/21NS 12/21NS 14/23NS 12/21NS 14/23NS 14/23NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 24/29NS 29/32NS 34/35NS 45/40
2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces1 piece1 piece
013.13.001013.13.002013.13.003013.13.004013.13.005
013.13.010013.13.020013.13.025
013.13.050
volumetric laboratory
65 mm70 mm70 mm70 mm70 mm70 mm90 mm
110 mm110 mm110 mm140 mm140 mm170 mm170 mm190 mm210 mm220 mm230 mm250 mm260 mm300 mm370 mm475 mm570 mm
7.50 mm7.50 mm7.50 mm7.50 mm7.50 mm
10.00 mm10.00 mm10.00 mm10.00 mm12.50 mm12.50 mm14.50 mm12.50 mm14.50 mm14.50 mm14.50 mm14.50 mm14.50 mm18.80 mm18.90 mm24.00 mm29.20 mm34.50 mm45.00 mm
www.dacchim.rotel/fax: 021 3440665
volume1 ml2 ml3 ml4 ml5 ml5 ml
10 ml20 ml25 ml25 ml50 ml50 ml
100 ml100 ml150 ml200 ml250 ml300 ml400 ml500 ml
1000 ml
neck innerdiameter
approximateheight
class “A”volumetric flasks
amber
They have exactly same specifications as clearvolumetric flasks.
All the inscriptions are printed with white enamel.
As an alternative for polyethylenestoppers which are supplied asa standard to volumetric flasks,a glass stopper can be selectedfrom our catalogue page no 80.
standardvolumetric flask
base area.
Trapezoidalvolumetric flask
base area.
Volumetric flasks of standardbody shape with small capacitycan tip over more easily due totheir higher center of gravity.Trapezoidal volumetric flaskshave a much larger base areawhich ensures higher stability.Compared to standard volumetricflasks of the same capacity,trapezoidal flasks have at leasttwice base area.
volumetric laboratory
standard bodywhite scale
014.01.005014.01.010014.01.020014.01.025014.01.026014.01.050014.01.051014.01.100014.01.101014.01.150014.01.200014.01.250014.01.300014.01.400014.01.500014.01.901
trapezoidal bodywhite scale013.15.001013.15.002013.15.003013.15.004013.15.005
013.15.010013.15.020013.15.025
013.15.050
tolerance± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.040 ml± 0.040 ml± 0.040 ml± 0.060 ml± 0.060 ml± 0.100 ml± 0.100 ml± 0.150 ml± 0.150 ml± 0.150 ml± 0.200 ml± 0.200 ml± 0.250 ml± 0.400 ml
neck sizeNS 07/16NS 07/16NS 07/16NS 07/16NS 07/16NS 10/19NS 10/19NS 10/19NS 10/19NS 12/21NS 12/21NS 14/23NS 12/21NS 14/23NS 14/23NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 24/29
quantityin box
2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces
65 mm70 mm70 mm70 mm70 mm70 mm90 mm
110 mm110 mm110 mm140 mm140 mm170 mm170 mm190 mm210 mm220 mm230 mm250 mm260 mm300 mm
7.50 mm7.50 mm7.50 mm7.50 mm7.50 mm
10.00 mm10.00 mm10.00 mm10.00 mm12.50 mm12.50 mm14.50 mm12.50 mm14.50 mm14.50 mm14.50 mm14.50 mm14.50 mm18.80 mm18.90 mm24.00 mm
www.dacchim.rotel/fax: 021 3440665
tolerancequantityin boxvolume
5 ml10 ml25 ml50 ml
100 ml250 ml500 ml
1000 ml2000 ml
glass baseblue scale
glass baseamber scale subdivision
approximateheight
P.P basewhite scale
Manufactured from borosilicate glass 3.3 which isresistant to heat and almost all chemicals.
They meet the highest quality standards according toDIN EN 4788 and DIN 12660.
Individually calibrated through automatic calibrationprocess carried out by robots.
Permanent quality control through all steps eliminatepossible deviations from nominal values.
Calibrated to contain (In) and all the tolerances areaccording to DIN/ISO Class “A” standards.
Conformity (“H”) certified, with a batch numberprinted on the body.
Batch certificate can be downloaded from our website.
Hexagonal cylinder base provides excellent stability.
Perfect spout design assures pouring without any drips.
Inscriptions and graduations are printed either withblue enamel or amber stain diffusion ink.
class “A”measuring cylinders
high form
015.01.005015.01.010015.01.025015.01.050015.01.100015.01.250015.01.500015.01.901015.01.902
015.03.005015.03.010015.03.025015.03.050015.03.100015.03.250015.03.500015.03.901015.03.902
015.05.010015.05.025015.05.050015.05.100015.05.250015.05.500015.05.901
115 mm135 mm160 mm195 mm240 mm320 mm380 mm465 mm565 mm
2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces1 piece
± 0.050 ml± 0.100 ml± 0.250ml± 0.500 ml± 0.500 ml± 1.000 ml± 2.500 ml± 5.000 ml± 10.000 ml
volumetric laboratory
± 0.100 ml± 0.200ml± 0.500 ml± 1.000 ml± 1.000 ml± 2.000 ml± 5.000 ml± 10.000 ml± 20.000 ml
Thick and durable plastic base ofthe cylinder does not have therisk of breaking during applicationThe plastic base fits the cylinderbody perfectly well and can beeasily dismantle.
www.dacchim.rotel/fax: 021 3440665
tolerance neck sizequantityin boxvolume
10 ml25 ml50 ml
100 ml250 ml500 ml
1000 ml
glass baseblue scale
glass baseamber scale subdivision
approximateheight
P.P basewhite scale
class “A”mixing cylinders
high form
016.01.010016.01.025016.01.050016.01.100016.01.250016.01.500016.01.901
016.03.010016.03.025016.03.050016.03.100016.03.250016.03.500016.03.901
015.06.010015.06.025015.06.050015.06.100015.06.250015.06.500015.06.901
2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces
135 mm160 mm195 mm240 mm320 mm380 mm465 mm
0.200 ml0.500 ml1.000 ml1.000 ml2.000 ml5.000 ml10.000 ml
± 0.100 ml± 0.250ml± 0.500 ml± 0.500 ml± 1.000 ml± 2.500 ml± 5.000 ml
volumetric laboratory
NS 10/19NS 14/23NS 19/26NS 24/29NS 29/32NS 34/35NS 45/40
As an alternative for polyethylenestoppers which are supplied asa standard to mixing cylinders, aglass stopper can be selectedfrom our catalogue page no 80.
Manufactured from borosilicate glass 3.3 which isresistant to heat and almost all chemicals.
They meet the highest quality standards according toDIN EN 4788 and DIN 12660.
Individually calibrated through automatic calibrationprocess carried out by robots.
Permanent quality control through all steps eliminatepossible deviations from nominal values.
Calibrated to contain (In) and all the tolerances areaccording to DIN/ISO Class “A” standards.
Conformity (“H”) certified, with a batch numberprinted on the body.
Batch certificate can be downloaded from our website.
Perfect neck grinding which prevents spillage duringmixing process.
Inscriptions and graduations are printed either withblue enamel or amber stain diffusion ink.
They are supplied with polyethylene stopper.
www.dacchim.rotel/fax: 021 3440665
class “B”volumetric flasks
polypropylene
volumetric laboratory
Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.
They offer high transperency, chemical resistance and remarkable heat tolerance.
They meet the highest quality standards according to DIN EN 1042
Individually calibrated through automatic calibration process carried out by robots.
Permanent quality control through all steps eliminate possible deviations from nominal values
Volumetric flasks are calibrated to contain (In) and the tolerances are according to DIN/ISO Class ”B” standards.
Flasks have inscriptions and meniscus ring mark in blue enamel which is specially designed for plastic and resistant to 60°C.
For consistent accurracy, polypropylene volumetric flasks schould not be used with liquids over 60°Cand should not be kept under sun or over heatedconditions.
volume25 ml50 ml
100 ml250 ml500 ml
1000 ml
neck inner diameter
approximateheight
quantityin pack1 piece1 piece1 piece1 piece1 piece1 piece
neck sizeNS 10/19NS 12/21NS 12/21NS 14/23NS 19/26NS 24/29
tolerance± 0.080 ml± 0.120 ml± 0.200 ml± 0.300 ml± 0.500 ml± 0.600 ml
blueinsriptions014.03.025014.03.050014.03.100014.03.250014.03.500014.03.901
110 mm140 mm170 mm220 mm260 mm300 mm
10.00 mm12.50 mm12.50 mm14.50 mm18.80 mm24.00 mm
www.dacchim.rotel/fax: 021 3440665
class “B”measuring cylinders
polypropylene
volumetric laboratory
Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.
They offer high transperency, chemical resistance and remarkable heat tolerance.
They meet the highest quality standards according to DIN 12681 and ISO 6706.
Individually calibrated through automatic calibration process carried out by robots.
Permanent quality control through all steps eliminate possible deviations from nominal values.
Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class ”B” standards.
Graduations are either as embossed scale or in blue enamel which is specially designed for plastic and resistant to 60°C.
For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under sun and over heatedconditions.
volume10 ml25 ml50 ml
100 ml250 ml500 ml
1000 ml
subdivisionblue
graduation016.06.010016.06.025016.06.050016.06.100016.06.250016.06.500016.06.901
embossedgraduation016.05.010016.05.025016.05.050016.05.100016.05.250016.05.500016.05.901
tolerance± 0.200 ml± 0.500 ml± 1.000 ml± 1.000 ml± 2.000 ml± 5.000 ml
± 10.000 ml
approximateheight
135 mm160 mm195 mm240 mm320 mm380 mm465 mm
quantityin pack1 piece1 piece1 piece1 piece1 piece1 piece1 piece
0.200 ml0.500 ml1.000 ml1.000 ml2.000 ml5.000 ml
10.000 ml
www.dacchim.rotel/fax: 021 3440665
class “AS”straight burettes
clear
volumetric laboratory
Manufactured from pre-vacuum calibrated borosilicate 3.3 glass tubes.
They meet the highest quality standards according to DIN EN ISO 385 and DIN 12700.
Permanent quality control through all steps eliminate possible deviations from nominal values
Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.
Conformity (“H”) certified, with a batch number printed on the body.
Batch certificate can be downloaded from our website.
Supplied with grease free and self lubricating PTFE stopcocks.
Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.
Manufactured either with or without schellbach stripe.
PTFE stopcocks have identical keys so that there is no need for “matching the pairs” during cleaning.Since PTFE is almost self lubricating, keys do not require greasing at all. PTFE keys are interchangable and replacable.
volume10 ml25 ml50 ml
approximateheight
w/o schellbachblue graduation
017.02.010017.02.025017.02.050
with schellbachblue graduation
017.01.010017.01.025017.01.050
w/o schellbachamber graduation
017.10.010017.10.025017.10.050
with schellbachamber graduation
017.09.010017.09.025017.09.050
tolerance± 0.020 ml± 0.030 ml± 0.050 ml
subdivision0.02 ml0.05 ml0.10 ml
quantityin box
1 piece1 piece1 piece
770 mm770 mm770 mm
www.dacchim.rotel/fax: 021 3440665
VALVE stopcocks have PTFE keys which do not require greasing at all.Due to the unique “needle” shape of the key, the burette valve can be closed with a gentle turn.This keys can provide the best drop control during titration process.
Manufactured from pre-vacuum calibrated borosilicate 3.3 glass tubes.
They meet the highest quality standards according to DIN EN ISO 385 and DIN 12700.
Permanent quality control through all steps eliminate possible deviations from nominal values.
Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.
Conformity (“H”) certified, with a batch number printed on the body.
Batch certificate can be downloaded from the website.
Supplied with grease free and self lubricating VALVE stopcocks.
Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.
Manufactured either with or without schellbach stripe.
class “AS”straight burettes
clear
volume10 ml25 ml50 ml
approximateheight
w/o schellbachblue graduation
017.04.010017.04.025017.04.050
with schellbachblue graduation
017.03.010017.03.025017.03.050
w/o schellbachamber graduation
017.12.010017.12.025017.12.050
with schellbachamber graduation
017.11.010017.11.025017.11.050
tolerance± 0.020 ml± 0.030 ml± 0.050 ml
subdivision0.02 ml0.05 ml0.10 ml
quantityin box
1 piece1 piece1 piece
volumetric laboratory
770 mm770 mm770 mm
www.dacchim.rotel/fax: 021 3440665
class “AS”straight burettes
amber
volumetric laboratory
Manufactured from pre-vacuum calibrated borosilicate glass.
They meet the highest quality standards according to DIN EN ISO 385 and DIN 12700.
Permanent quality control through all steps eliminate possible deviations from nominal values.
Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.
Conformity (“H”) certified, with a batch number printed on the body.
Batch certificate can be downloaded from our website.
Supplied with either PTFE or VALVE stopcocks.
Inscriptions and graduations are printed with white enamel which is specially designed for glass use.
Amber burettes are manufactured without schellbach stripe.
Metal burette clamps are made out of steel and can hold one burette at a time.Graduations and meniscus line of the burette are clearly visible.They can be used on support rods of 8-14 mm diameter.Catalogue No: 018.05.001
Polypropylene burette clamp can hold one burette at a time.Graduations and meniscus line of the burette are clearly visible.They can be used on support rods of 10-12 mm diameter.Catalogue No: 018.06.001
volume10 ml25 ml50 ml
quantityin box1 piece1 piece1 piece
with VALVE stopcockwhite graduations
018.02.010018.02.025018.02.050
with PTFE stopcockwhite graduations
018.01.010018.01.025018.01.050
tolerance± 0.020 ml± 0.030 ml± 0.050 ml
subdivision0.02 ml0.05 ml0.10 ml
www.dacchim.rotel/fax: 021 3440665
class “AS”modular burettes
clear & amber
burette tubes for modular burettes
volume10 ml25 ml50 ml
subdivision0.02 ml0.05 ml0.10 ml
tolerance± 0.020 ml± 0.030 ml± 0.050 ml
amber - w/o schellbachwhite graduations
017.24.010017.24.025017.24.050
clear - schellbachamber graduations
017.21.010017.21.025017.21.050
clear - schellbachblue graduations
017.17.010017.17.025017.17.050
volume10 ml25 ml50 ml
clear - schellbachblue graduations
017.25.010017.25.025017.25.050
clear - schellbachamber graduations
017.29.010017.29.025017.29.050
amber - w/o schellbachwhite graduations
017.31.010017.31.025017.31.050
tolerance± 0.020 ml± 0.030 ml± 0.050 ml
subdivision0.02 ml0.05 ml0.10 ml
quantityin box1 piece1 piece1 piece
volumetric laboratory
All components of the modular burette are replacable.
Multiple burette tubings can be used with one single stopcock.
Modular construction with detachable burette tube and stopcock enables fast dismantle and easy cleaning.
Inscriptions and graduations are printed either with blue enamel or white enamel for the amber burettes.
Clear burettes are manufactured with schellbach stripe
Other technical specifications are exactly the same as other types of burettes.
quantityin box1 piece1 piece1 piece
Modular construct ion with detachable burette tube and stopcock enables fast dismantle and easy cleaning.
www.dacchim.rotel/fax: 021 3440665
Supplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the residual liquid.
Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.
Clear burettes are manufactured with schellbach stripe.
Other technical specifications are exactly the same as other types of burettes.
class “AS”automatic burettes
clear
volume10 ml25 ml50 ml
0.02 ml0.05 ml0.10 ml
subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml
019.03.010019.03.025019.03.050
with schellbachamber graduations
019.01.010019.01.025019.01.050
with schellbachblue graduations
volumetric laboratory
All automatic burettes have an intermediate PTFE stopcock which enables fast and accurate measurement.
Burette bellow for automatic burettes is made out of best quality natural rubber.Catalogue No: 020.08.001
www.dacchim.rotel/fax: 021 3440665
class “AS”automatic burettes
amber
volume10 ml25 ml50 ml
0.02 ml0.05 ml0.10 ml
subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml
019.05.010019.05.025019.05.050
w/o schellbachwhite scale
volumetric laboratory
Supplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the residual liquid.
Inscriptions and graduations are printed with white enamel which is specially designed for glass use.
Amber burettes are manufactured without schellbach stripe.
Other technical specifications are exactly the same as other types of burettes.
Clear bottle for automatic burettes is made out of heat resistant glass. Each bottle has a NS 29/32 neck grinding that fits to burette.Total volume capacity of the bottle is 2000 ml.Catalogue No: 020.07.010
Amber bottle for automatic burettes is made out of heat resistant glass. Each bottle has a NS 29/32 neck grinding that fits to burette.Total volume capacity of the bottle is 2000 ml.Catalogue No: 020.07.025
www.dacchim.rotel/fax: 021 3440665
spare modular burette tubes
class “AS”automatic burettes
modular
volumetric laboratory
volume10 ml25 ml50 ml
0.02 ml0.05 ml0.10 ml
subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml
020.11.010020.11.025020.11.050
clear - schellbachblue graduations
020.13.010020.13.025020.13.050
amber - w/o schellbachwhite graduations
volume10 ml25 ml50 ml
0.02 ml0.05 ml0.10 ml
subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml
020.01.010020.01.025020.01.050
clear - schellbachblue graduations
020.10.010020.10.025020.10.050
amber - w/o schellbachwhite graduations
Modular automatic burette offers an economical alternative to classical automatic burettes.
The entire system consists of a burette tubing with automatic zeroing system, a modular stopcock, a reservoir bottle, a burette clamp and a burette stand.
All components of these burettes are replacable.
Multiple burette tubings can be used with one single stopcock.
Modular construction with detachable burette tube and stopcock enables fast dismantle and easy cleaning.
Inscriptions and graduations are printed either with blue enamel or with white enamel which is specially designed for glass use.
Clear burettes are manufactured with schellbach stripe.
10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume.
Other technical specifications are exactly the same as other types of burettes
www.dacchim.rotel/fax: 021 3440665
class “AS”schilling burettes
clear & amber
volumetric laboratory
Described as automatic burettes with fast titration and practical usage.
Especially suitable for field analysis where there is a risk of breaking.
The entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle stand.
Rapid filling by squeezing the bottle and fast titration by valve stopcock
Inscriptions and graduations are printed either with blue enamel or with white enamel which is specially designed for glass use.
Clear burettes are manufactured with schellbach stripe.
Amber burettes are manufactured without schellbach stripe.
10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used wi th bot t les of 1000 ml volume.
Other technical specifications are exactly the same as other types of burettes.
spare schilling burette tubes
volume10 ml25 ml50 ml
0.02 ml0.05 ml0.10 ml
subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml
020.06.010020.06.025020.06.050
clear - schellbachblue graduations
020.08.010020.08.025020.08.050
amber - w/o schellbachwhite graduations
volume10 ml25 ml50 ml
0.02 ml0.05 ml0.10 ml
subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml
020.03.010020.03.025020.03.050
clear - schellbachblue graduations
020.05.010020.05.025020.05.050
amber - w/o schellbachwhite graduations
www.dacchim.rotel/fax: 021 3440665
Tips are carefully formed and bevelled to ensure proper flow rates.
They meet the highest quality standards according to DIN 12697 and BS 700 - 1583.
Individually calibrated through automatic calibration process carried out by robots.
Permanent quality control through all steps eliminate possible deviations from nominal values.
Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.
Conformity (“H”) certified, with a batch number printed on the body.
Batch certificate can be downloaded from our website.
Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.
All pipettes have colour coded suction stems to allow fast identification and sorting.
class “AS”glass pipettes
graduated & volumetric
volume1 ml2 ml3 ml4 ml5 ml
10 ml15 ml20 ml25 ml50 ml
100 ml
quantityin box
1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece
length310 mm330 mm360 mm360 mm400 mm440 mm440 mm455 mm510 mm520 mm540 mm
tolerance± 0.007 ml± 0.010 ml± 0.010 ml± 0.015 ml± 0.015 ml± 0.020 ml± 0.020 ml± 0.030 ml± 0.030 ml± 0.030 ml± 0.050 ml
volumetricamber scale021.07.001021.07.002021.07.003021.07.004021.07.005021.07.010021.07.011021.07.015021.07.020021.07.025021.07.050
volumetricblue scale021.05.001021.05.002021.05.003021.05.004021.05.005021.05.010021.05.011021.05.015021.05.020021.05.025021.05.050
volume1 ml2 ml5 ml
10 ml20 ml25 ml50 ml
quantityin box
10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces
length360 mm360 mm360 mm360 mm450 mm450 mm720 mm
tolerance± 0.007 ml± 0.010ml± 0.030 ml± 0.050ml± 0.100 ml± 0.100 ml± 0.200 ml
graduatedamber scale021.03.001021.03.002021.03.005021.03.010021.03.020021.03.025021.03.050
graduatedblue scale021.01.001021.01.002021.01.005021.01.010021.01.020021.01.025021.01.050
volumetric laboratorywww.dacchim.ro
tel/fax: 021 3440665
polypropylenepipette stand
vertical
Manufactured from moulded polypropylene and can hold up to 12 pipettes without any pressure on fragile pipette tips.
Ideal stand to store pipettes without any pressure on fragile pipette tips.
Easy to clean and dismantle, especially suitable for space saving purpose.
polypropylenepipette stand
horizontal
1 pieceqty/pack
240x180x290 mmdimensions
1 pieceqty/pack
Manufactured from moulded polypropylene and can hold up to 94 pipettes vertically.
Can rotate 360° on a central vertical axis for easy selection of any particular pipette.
Upper disc keeps the pipettes in the correct position.
The lower rotating disc has open bottoms which cradle the pipette tips and permit water drops to run off.
The base plate has a raised edge which enables collection of dripping liquids.
volumetric laboratory
022.01.001catalogue number
022.02.001catalogue number
dimensions23 cm x H 49 cmø
www.dacchim.rotel/fax: 021 3440665
volumetric laboratory
pipette fillerpi-pump
for pipette volume
up to 2 mlup to 10 mlup to 25 ml
colourcode
quantityin box
1 piece1 piece1 piece
cataloguenumber
011.01.002011.01.010011.01.025
The handwheel allows precise suction of the liquid into the pipette with one hand.
The handwheel which enables the suction piston is designed for easy operation by using only the thumb.
When the wheel stops, the piston remains in the desired position.
The liquid can be blown out by pressing the piston back or allowed to flow out by setting the lateral switch to “Ex”.
A slight pressure applied to the discharge lever opens the valve and lets the liquid flow out easily.
pipette fillermacro
pipette fillermaxi
Large capacity bulb which works perfectly with all pipette sizes from 1 ml up to 100 ml.
First squeeze the silicone bulb and the thumb lever controls both the aspirate and dispense modes.
Incorporates central button to blow out the residual liquid into the pipettes.
Most common pipette aid for all types of pipettes.
Has ball valves which can be controlled by finger pressure.
bluegreenred
capacity forpipette size1 - 100 ml
cataloguenumber
011.02.003
for pipette volume
up to 10 mlup to 100 ml
quantityin box
1 piece1 piece
cataloguenumber
011.02.001011.02.002
modelname
standarduniversal
quantityin pack1 piece
www.dacchim.rotel/fax: 021 3440665
Manufactured according to DIN 12797 standards.
The upper and lower ends of the stopper is ground and polished.
Nominal volume and inscriptions are printed with blue enamel.
Individually calibrated to contain (In) to 0,001 ml.
Net volume capacity is engraved on the body.
Each bottle is calibrated together with its stopper.
In order to differentiate easily, both the body and the stopper have the same code numbers printed on themselves.
volume5 ml
10 ml25 ml50 ml
100 ml
uncalibrateddensity bottles
glass
calibrateddensity bottles
glass
calibrated with thermometerdensity bottles
glass
quantityin pack1 piece1 piece1 piece1 piece1 piece
density bottlescalibrated + thermometer
023.03.005023.03.010023.03.025023.03.050023.03.100
density bottlescalibrated
023.02.005023.02.010023.02.025023.02.050023.02.100
density bottlesuncalibrated023.01.005023.01.010023.01.025023.01.050023.01.100
volumetric laboratory
Individually calibrated to contain (In) to 0,001 ml.
Complete with a thermometer of scale -10°C / + 40°C, with graduations of 0,5°C.
Net volume capacity is engraved on the body.
Each body is calibrated together with its stopper and thermometer.
In order to differentiate easily, both the body and the stopper have the same code numbers printed on themselves.
www.dacchim.rotel/fax: 021 3440665
analytical laboratory
columnschromatography
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
With 2,5 mm bore PTFE stopcock for fine control of fluent flow. Supplied with or without sintered glass support of porosity 0.
quantityinpack1 piece1 piece1 piece
socketNS size
NS 14/23NS 14/23NS 19/26
effectivelenght
200 mm300 mm200 mm
internaldiameter10 mm10 mm15 mm
volume15 ml25 ml35 ml
with sintered gas tubegas wash bottles
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
With detachable plastic connectors for easy fitting of flexible tubing.
Sintered dip tube dispenses gas into bubbles for greater efficiency.
Other sizes for columns can be supplied on request.
withsupport
066.03.015066.03.025066.03.035
w/osupport
066.01.015066.01.025066.01.035
kipp dispensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals for easy dispensing of liquids.
quantityin pack1 piece1 piece1 piece1 piece1 piece
reservoirvolume500 ml500 ml500 ml500 ml500 ml
dispenser headand reservoir067.08.005067.08.010067.08.020067.08.025067.08.050
dispenserhead
067.09.005067.09.010067.09.020067.09.025067.09.050
dispenservolume
5 ml10 ml20 ml25 ml50 ml
stemlenght
130 mm165 mm215 mm
quantityin pack1 piece1 piece1 piece
bottle headcatalogue no
bottlecatalogue no
bottlevolume125 ml250 ml500 ml
socketNS size
NS 29/32NS 29/32NS 29/32
Other sizes for gas bottles can be supplied on request.
067.07.125067.07.250067.07.500
067.06.125067.06.250067.06.500
www.dacchim.rotel/fax: 021 3440665
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to ISO 3819 and DIN 12331.
These beakers have thick walls and heavy bases.
Reinforced rims and spout to prevent breaking during washing and transportation.
Inscriptions are in white enamel which is specially designed for glass use.
glassbeakers
low form
quantityin boxvolume
25 ml50 ml
100 ml150 ml250 ml400 ml600 ml800 ml
1000 ml2000 ml5000 ml
10000 ml
glass beakerswhite scale
approximateheight Diameter
025.01.025025.01.050025.01.100025.01.150025.01.250025.01.400025.01.600025.01.800025.01.901025.01.902025.01.905025.01.910
50 mm60 mm70 mm80 mm95 mm
110 mm125 mm135 mm145 mm185 mm270 mm325 mm
34 mm42 mm50 mm60 mm70 mm80 mm90 mm
100 mm105 mm130 mm170 mm228 mm
10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces6 pieces1 piece1 piece
analytical laboratory
polypropylenebeakers
low form
Manufactured from ultra clear virgin polypropylene which provides thick walls with superior chemical resistance.
They meet the highest quality standards according to ISO 7056.
Inscriptions are either blue enamel which is specially designed for plastic use or with embossed scale.
volume25 ml50 ml
100 ml250 ml500 ml
1000 ml2000 ml
P.P beakersembossed026.01.025026.01.050026.01.100026.01.250026.01.500026.01.901026.01.902
P.P beakersblue scale026.03.025026.03.050026.03.100026.03.250026.03.500026.03.901026.03.902
quantityin pack1 piece1 piece1 piece1 piece1 piece1 piece1 piece
height47 mm60 mm70 mm93 mm
119 mm147 mm184 mm
diameter32 mm39 mm50 mm67 mm88 mm
109 mm133 mm
www.dacchim.rotel/fax: 021 3440665
polypropylenebeakers with handle
high form
Uniquely shaped ergonomic handles are suitable for space saving and stacking
stainless steelbeaker tong
Manufactured from ultra clear virgin polypropylene which provides thick walls with superior chemical resistance.
They have specially designed functional spouts in order to minimize posible spills.
They meet the highest quality standards according to ISO 7056.
Inscriptions are either blue enamel which is specially designed for plastic use or with embossed scale.
volume250 ml500 ml
1000 ml2000 ml3000 ml
analytical laboratory
for beakersvolume
up to 1000 ml
quantityin box1 piece
flasktong
026.03.001length
300 mm
Beaker tong of 300 mm length is made out of stainless steel.
Insulated jaws are used to hold all types of beakers.
beakers w.handleblue scale
026.04.250026.04.500026.04.901026.04.902026.04.903
beakers w.handleembossed scale
026.02.250026.02.500026.02.901026.02.902026.02.903
quantityin pack1 piece1 piece1 piece1 piece1 piece
height115 mm137 mm167 mm217 mm244 mm
diameter75 mm
100 mm125 mm148 mm170 mm
www.dacchim.rotel/fax: 021 3440665
glasserlenmeyers
medium neck
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to ISO 1773 and DIN 12380.
Reinforced rims and spout to prevent breaking during washing and transportation.
Inscriptions are in white enamel which is specially designed for glass use.
glasserlenmeyers
screw cap
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
Ideal for contamination free storage of culture specimen and media.
Autoclavable flasks and PP screw caps are resistant up to 121°C.
Inscriptions are in white enamel which is specially designed for glass use.
analytical laboratory
volume100 ml250 ml500 ml
1000 ml
glass erlenmeyerswith screw cap
027.03.100027.03.250027.03.500027.03.901
necksize
GL 32GL 32GL 32GL 32
approximateheight
110 mm145 mm180 mm225 mm
quantityin pack1 piece1 piece1 piece1 piece
quantityin boxvolume
50 ml100 ml250 ml300 ml500 ml
1000 ml2000 ml
approximateheight
internal neckdiameter
glass erlenmeyerswhite scale027.01.050027.01.100027.01.250027.01.300027.01.500027.01.901027.01.902
85 mm105 mm145 mm160 mm190 mm215 mm285 mm
55 mm65 mm85 mm90 mm
105 mm130 mm165 mm
10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces6 pieces
www.dacchim.rotel/fax: 021 3440665
polypropyleneerlenmeyers
screw cap
glasserlenmeyers
ground neck
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12387.
NS necks are in compliance with DIN 12242 standards.
Inscriptions are in white enamel which is specially designed for glass use.
volume50 ml50 ml50 ml50 ml
100 ml100 ml100 ml100 ml250 ml250 ml250 ml300 ml500 ml500 ml500 ml
1000 ml1000 ml2000 ml
approx.height85 mm85 mm85 mm85 mm
100 mm100 mm100 mm100 mm140 mm140 mm140 mm156 mm175 mm175 mm175 mm220 mm220 mm280 mm
bottomdiameter
51 mm51 mm51 mm51 mm64 mm64 mm64 mm64 mm85 mm85 mm85 mm87 mm
105 mm105 mm105 mm131 mm131 mm166 mm
quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece
neckNS size
glass erlenmeyerswith NS neck028.01.050028.01.051028.01.052028.01.053028.01.100028.01.101028.01.102028.01.103028.01.250028.01.251028.01.252028.01.300028.01.500028.01.501028.01.502028.01.900028.01.901028.01.902
analytical laboratory
Manufactured from high grade polypropylene.
These erlenmeyers are an excellent break-resistant alternative to glass.
Screened on graduations of approximate volumes.
Supplied with contamination free and leakproof polypropylene screw caps.
volume50 ml
100 ml250 ml500 ml
1000 ml
glass erlenmeyerswith screw cap
028.03.050028.03.100028.03.250028.03.500028.03.901
necksize
GL 40GL 40GL 52GL 52GL 52
height92 mm
113 mm146 mm182 mm227 mm
quantityin box1 piece1 piece1 piece1 piece1 piece
www.dacchim.rotel/fax: 021 3440665
glassflasks
flat & round bottom
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to ISO 1773 and DIN 12348.
NS necks are in compliance with DIN 12348 standards.
Reinforced rims are used to prevent breaking during washing and transportation.
ground neckflasks
flat & round bottom
They meet the highest quality standards according to DIN 12394.
All other technical and physical specifications are similaras flat and round bottom flasks.
volume50 ml
100 ml250 ml500 ml
1000 ml2000 ml4000 ml6000 ml
10000 ml
quantityin box
10 pieces10 pieces10 pieces10 pieces10 pieces6 pieces1 piece1 piece1 piece
approx.diameter
51 mm64 mm85 mm
105 mm131 mm166 mm207 mm236 mm279 mm
approx.height90 mm
105 mm138 mm163 mm190 mm230 mm275 mm315 mm360 mm
029.02.050029.02.100029.02.250029.02.500029.02.901029.02.902029.02.904029.02.906029.02.910
roundbottom
flatbottom
029.01.050029.01.100029.01.250029.01.500029.01.901029.01.902029.01.904029.01.906029.01.910
quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece
neckNS size
NS 14/23NS 19/26NS 24/29NS 29/32NS 14/23NS 19/26NS 24/29NS 29/32NS 19/26NS 24/29NS 29/32NS 24/29NS 29/32NS 24/29NS 29/32NS 29/32
approx.height
100 mm100 mm100 mm100 mm110 mm110 mm110 mm110 mm140 mm140 mm140 mm170 mm170 mm200 mm200 mm250 mm
volume50 ml50 ml50 ml50 ml
100 ml100 ml100 ml100 ml250 ml250 ml250 ml500 ml500 ml
1000 ml1000 ml2000 ml
roundbottom
030.02.050030.02.051030.02.052030.02.053030.02.100030.02.101030.02.102030.02.103030.02.250030.02.251030.02.252030.02.500030.02.501030.02.900030.02.901030.02.902
flatbottom
030.01.050030.01.051030.01.052030.01.053030.01.100030.01.101030.01.102030.01.103030.01.250030.01.251030.01.252030.01.500030.01.501030.01.900030.01.901030.01.902
analytical laboratorywww.dacchim.ro
tel/fax: 021 3440665
with 3 NS jointflasks
ground neck
with 2 NS jointflasks
ground neck
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They have thick walls, heavy bases and reinforced rims which prevent breaking.
They meet the highest quality standards according to DIN 12394.
Side arms are either parallel or 45 degree angled with each other.
NS necks are in compliance with DIN 12242 standards.
Other NS sizes for flasks can be supplied on request.
volume100 ml250 ml500 ml
1000 ml250 ml500 ml
1000 ml2000 ml
quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece
diameter64 mm85 mm
105 mm131 mm85 mm
105 mm131 mm
centerNS size
NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32
sideNS size
NS 14/23NS 14/23NS 14/23NS 14/23NS 29/32NS 29/32NS 29/32NS 29/32
round bottomangled side arm
030.03.100030.03.250030.03.500030.03.901030.04.250030.04.500030.04.901030.04.902
round bottomparallel side arm
030.05.100030.05.250030.05.500030.05.901030.06.250030.06.500030.06.901030.06.902
Other NS sizes for flasks can be supplied on request.
volume250 ml500 ml
1000 ml250 ml500 ml
1000 ml250 ml500 ml
1000 ml2000 ml
quantityin box
1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece
diameter85 mm
105 mm131 mm85 mm
105 mm131 mm85 mm
105 mm131 mm
centerNS size
NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32
side (L)NS size
round bottomangled side arm
round bottomparallel side arm
side (R)NS size
NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32
NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32
030.16.250030.16.500030.16.901030.17.250030.17.500030.17.901030.18.250030.18.500030.18.901030.18.902
030.13.250030.13.500030.13.901030.14.250030.14.500030.14.901030.15.250030.15.500030.15.901030.15.902
analytical laboratory
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
Side arms are either parallel or 45 degree angled with each other.
Other technical specifications are the same as 2 NS neck flasks.
www.dacchim.rotel/fax: 021 3440665
ground neckflasks
pear shape
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12383 standards.
NS necks are in compliance with DIN 12242 standards.
Reinforced rims are used to prevent breaking during washing and transportation.
ground neckflasks
evaporating & receiving
volume10 ml25 ml50 ml
100 ml
cataloguenumber
029.05.010029.05.025029.05.050029.05.100
quantityin box1 piece1 piece1 piece1 piece
NS 14/23NS 14/23NS 14/23NS 14/23
neckNS size
quantityin box1 piece1 piece1 piece1 piece
for spherical jointsclips
analytical laboratory
volume100 ml250 ml500 ml1000 ml
receivingflasks
029.08.100029.08.250029.08.500029.08.901
evaporatingflasks
029.07.100029.07.250029.07.500029.07.901
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12383 standards.
Manufactured from best quality stainless steel.
A perfect tool to hold the spherical joints firmly during laboratory applications.
Suitable for NS 29 joints. Catalogue No: 063.05.001
Other sizes of spherical joint clips can be supplied on request.
www.dacchim.rotel/fax: 021 3440665
ground neckflasks
kjeldahl
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to ISO and DIN standards.
NS necks are in compliance with DIN 12242 standards.
Reinforced rims are used to prevent breaking during washing and transportation.
volume100 ml250 ml500 ml750 ml
1000 ml
flatbottom
029.06.100029.06.250029.06.500029.06.750029.06.901
quantityin box1 piece1 piece1 piece1 piece1 piece
Flask tong with 300 mm length is made out of stainless steel.
Insulated jaws are used to hold all types of flasks.
for flaskscork stands
Flask stands are made out of the best quality high density cork.
They are ideal to be used with round bottom flasks.
stainless steelflask tong
NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32
neckNS size
analytical laboratory
for flasksvolume100 ml250 ml500 ml
1000 ml
quantityin box1 piece1 piece1 piece1 piece
flaskstands
029.04.100029.04.250029.04.500029.04.901
for flasksvolume
up to 2000 ml
quantityin box1 piece
flasktong
029.03.001length
300 mm
approx.diameter
80 mm100 mm120 mm140 mm
www.dacchim.rotel/fax: 021 3440665
glass & P.P side armallihn condensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12581.
Supplied with either glass side arm or polypropylene side arm.
Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.
The side arms accept tubings with 8/9 mm bore size.
with glassside arm
033.03.300033.03.400
quantityin box
1 piece1 piece
length300 mm400 mm
with P.Pside arm
033.04.300033.04.400
neckNS size
NS 29/32NS 29/32
glass & P.P side armliebig condensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12576.
Supplied with either glass side arm or polypropylene side arm.
Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.
The side arms accept tubings with 8/9 mm bore size.
Other NS sizes for condensers can be supplied on request.
with glassside arm
033.01.300033.01.400
quantityin box
1 piece1 piece
length300 mm400 mm
with P.Pside arm
033.02.300033.02.400
neckNS size
NS 29/32NS 29/32
Other NS sizes for condensers can be supplied on request.
analytical laboratorywww.dacchim.ro
tel/fax: 021 3440665
glass & P.P side armdimroth condensers
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12591.
Supplied with either glass side arm or polypropylene side arm.
Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.
The side arms accept tubings with 8/9 mm bore size.
with glassside arm
034.03.300034.03.400
quantityin box
1 piece1 piece
length300 mm400 mm
with P.Pside arm
034.04.300034.04.400
neckNS size
NS 29/32NS 29/32
with glassside arm
034.01.300034.01.400
quantityin box
1 piece1 piece
length300 mm400 mm
with P.Pside arm
034.02.300034.02.400
neckNS size
NS 29/32NS 29/32
glass & P.P side armcoiled condensers
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12592.
Supplied with either glass side arm or polypropylene side arm.
Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.
The side arms accept tubings with 8/9 mm bore size.
Other NS sizes for condensers can be supplied on request.
Other NS sizes for condensers can be supplied on request.
analytical laboratorywww.dacchim.rotel/fax: 021 3440665
for soxhletdimroth condensers
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They are carefully produced in order to meet the highest quality standards.
Supplied with either glass side arm or polypropylene side arm.
Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.
The side arms accept tubings with 8/9 mm bore size.
with glassside arm
035.03.300035.03.400
quantityin box
1 piece1 piece
length300 mm400 mm
with P.Pside arm
035.04.300035.04.400
neckNS size
NS 45/40NS 45/40
for soxhletallihn condensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They are carefully produced in order to meet the highest quality standards.
Supplied with either glass side arm or polypropylene side arm.
Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.
The side arms accept tubings with 8/9 mm bore size.
Other NS sizes for condensers can be supplied on request.
with glassside arm
035.01.300035.01.400
quantityin box
1 piece1 piece
length300 mm400 mm
with P.Pside arm
035.02.300035.02.400
neckNS size
NS 45/40NS 45/40
Other NS sizes for condensers can be supplied on request.
analytical laboratorywww.dacchim.ro
tel/fax: 021 3440665
with and W/O stopcocksoxhlet extractorsManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12602.
Either supplied with PTFE stopcock or without any stopcocks.
The side arms accept tubings with 8/9 mm bore size.
withoutstopcock
036.01.100036.01.150036.01.250036.01.500
quantityin box
1 piece1 piece1 piece1 piece
volume100 ml150 ml250 ml 500 ml
withstopcock
036.02.100036.02.150036.02.250036.02.500
coneNS neck
socketNS neck
NS 29/32NS 29/32NS 29/32NS 29/32
NS 45/40NS 45/40NS 45/40NS 45/40
Other NS sizes for extractors can be supplied on request.
for soxhlet extractorscellulose thimblesManufactured from carrefully selected pure cellulose.
Ideal for soxhlet or other extractions to obtain reproducible results without influencing the samples.
They have perfectly controlled dimensional accuracy which provides excellent fit to the extractor.
They are also suitable for extracting solid or liquid particles from the air or gasses.
Other NS sizes for thimbles can be supplied on request.
cataloguenumber
MN.645022MN.645027MN.645026
quantityin box
25 pieces25 pieces25 pieces
for extractorvolume100 ml150 ml250 ml
heightdiameter33 mm34 mm40 mm
94 mm120 mm150 mm
analytical laboratorywww.dacchim.rotel/fax: 021 3440665
conicalseparating funnels
ungraduated031.03.050031.03.100031.03.250031.03.500031.03.901031.03.902
quantityin box
1 piece1 piece1 piece1 piece1 piece1 piece
volume50 ml
100 ml250 ml500 ml
1000 ml2000 ml
graduated031.04.050031.04.100031.04.250031.04.500031.04.901031.04.902
neckNS size
NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12451.
Supplied with totally grease free and self lubricating PTFE stopcock.
These separating funnels are either with or without graduations.
Graduations and inscriptions are printed in white enamel.
They are supplied with polyethylene stoppers.
squibbseparating funnels
ungraduated031.01.050031.01.100031.01.250031.01.500031.01.901031.01.902
quantityin box
1 piece1 piece1 piece1 piece1 piece1 piece
volume50 ml
100 ml250 ml500 ml
1000 ml2000 ml
graduated031.02.050031.02.100031.02.250031.02.500031.02.901031.02.902
neckNS size
NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12452.
Supplied with totally grease free and self lubricating PTFE stopcock.
These separating funnels are either with or without graduations.
Graduations and inscriptions are printed in white enamel.
They are supplied with polyethylene stoppers.
analytical laboratory
Funnels can be supplied with VALVE stopcock on request.
Funnels can be supplied with VALVE stopcock on request.
www.dacchim.rotel/fax: 021 3440665
cylindricalseparating funnels
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12566.
Supplied with totally grease free and self lubricating PTFE stopcock.
These separating funnels are either with or without graduations.
Graduations and inscriptions are printed in white enamel.
They are supplied with polyethylene stoppers.
analytical laboratory
Other NS sizes for funnels can be supplied on request.Funnels can be supplied with VALVE stopcock on request.
ungraduated031.05.050031.05.100031.05.250031.05.500031.05.901
quantityin box
1 piece1 piece1 piece1 piece1 piece
volume50 ml
100 ml250 ml500 ml
1000 ml
graduated031.06.050031.06.100031.06.250031.06.500031.06.901
neckNS size
NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32
conicalW/O relief tube
032.01.050032.01.100032.01.250032.01.500032.01.901
quantityin box
1 piece1 piece1 piece1 piece1 piece
volume50 ml
100 ml250 ml500 ml
1000 ml
cylindricalW/O relief tube
032.02.050032.02.100032.02.250032.02.500032.02.901
cylindricalwith relief tube
032.03.050032.03.100032.03.250032.03.500032.03.901
neckNS size
NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32
Funnels can be supplied with VALVE stopcock on request.
conical & cylindricaldropping funnels
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12451 and DIN 12567.
All dropping funnels are supplied with PTFE stopcock.
Graduations and inscriptions are printed in white enamel.
They are supplied with polyethylene stoppers.
www.dacchim.rotel/fax: 021 3440665
glassfunnels
laboratory
Manufactured from borosilicate glass 3.3 with short stem and 60° cone angle.
These funnels are in accordance with DIN 12445 and ISO 4798 standards.
polypropylenefunnels
laboratory
Manufactured from clear, virgin polypropylene.
Polypropylene funnels are autoclavable at 121°C and 1.1 bar for 30 minutes.
External ribs prevent airlock and back pressure.
Ribbed funnels have internal helicoid ribs which prevent filter papers from sticking and increase the filtration speed.
funneldiameter40 mm60 mm80 mm
100 mm120 mm150 mm
quantityin box1 piece1 piece1 piece1 piece1 piece1 piece
glassfunnels
041.01.040041.01.060041.01.080041.01.100041.01.120041.01.150
stemdiamater
6 mm8 mm8 mm
10 mm16 mm16 mm
totallength70 mm
106 mm143 mm178 mm220 mm267 mm
stemlength40 mm60 mm80 mm
100 mm120 mm150 mm
analytical laboratory
Internal helicoid ribs of the funnels ensure rapid filtration process.
funneldiameter40 mm60 mm80 mm
100 mm120 mm150 mm
quantityin box1 piece1 piece1 piece1 piece1 piece1 piece
funnelsw/o rib
041.02.040041.02.060041.02.080041.02.100041.02.120041.02.150
stemdiamater
6 mm8 mm8 mm
10 mm16 mm16 mm
stemlength40 mm60 mm80 mm
100 mm120 mm150 mm
funnelswith rib
041.05.040041.05.060041.05.080041.05.100041.05.120041.05.150
www.dacchim.rotel/fax: 021 3440665
analytical laboratory
Manufactured from best quality stainless steel.
Suitable to hold all type of funnels with a diameter up to 150 mm. Can also hold seperating funnels due to the unique design of the holding circle.
Steel holders are supplied with or without boss head.
quantityin box1 piece1 piece1 piece1 piece
st. steel holderW/O boss head
042.03.040042.03.060042.03.080042.03.100
holderdiameter40 mm60 mm80 mm
100 mm
st. steel holderwith boss head
042.04.040042.04.060042.04.080042.04.100
Manufactured from best quality polypropylene.
Suitable to hold all types of laboratory funnels with diameter up to 150 mm.
Two tapered wedges are provided to ensure firm grip on roads heaving diameter 10-13 mm.
Catalogue No: 042.05.001
stainless steelfunnel holder
laboratory
polypropylenefunnel holder
laboratory
polypropylenefunnel holder
separating
Manufactured from best quality polypropylene.
Suitable to hold all types of laboratory funnels and also separatory funnels with diameter up to 150 mm.
Two tapered wedges are provided to ensure firm grip on roads heaving diameter 10-13 mm.
Catalogue No: 042.06.001
www.dacchim.rotel/fax: 021 3440665
for filter flasksadapters
rubber
quantityin box1 piece1 piece1 piece1 piece
Its special design centers the funnel and flask providing support for funnels.
A clean seal is created between the flask rim and the funnel.
Also provide all-round protection reducing impact damages.
glassfilter flasks
Manufactured from borosilicate glass 3.3 with thick walls according to ISO 6556 and DIN 12476 standards.
Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.
polypropylenefilter flasks
Manufactured from clear, virgin polypropylene.
Side arm of filter flask is suitable to work with 6-10 mm hose diameter.
quantityin box1 piece1 piece1 piece1 piece1 piece
flask withglass side arm
040.01.100040.01.250040.01.500040.01.901040.01.902
flask withP.P side arm040.02.100040.02.250040.02.500040.02.901040.02.902
volume100 ml250 ml500 ml
1000 ml2000 ml
quantityin box1 piece
flaskpolypropylene
040.03.901volume1500 ml
suitable forflask volume
100 ml250 - 500 ml
1000 ml2000 ml
height10 mm15 mm25 mm25 mm
diameter23 mm33 mm44 mm58 mm
cataloguenumber
040.05.001040.05.002040.05.003040.05.004
analytical laboratorywww.dacchim.ro
tel/fax: 021 3440665
porcelainfunnels
Büchner
Manufactured from glazed porcelain according to DIN 40685 standards.
Support plate holds the filter paper, prevents blockage of the holes and allows maximum filtration speed.
analytical laboratory
Other sizes for funnels can be supplied on request.
polypropylenefunnels
Büchner
Manufactured from clear, virgine polypropylene with the top part having a perforated filter plate.
The top part can be snap fitted with the lower part forming a vacuum seal.
Upper and lower parts can be separated from each other for easy and efficient cleaning.
for filter paper diameter
nominalvolume
quantityin box1 piece1 piece
innerdiameter
polypropylenefunnels
042.02.070042.02.110
200 ml600 ml
70 - 90 mm110 - 125 mm
70 mm110 mm
quantityin box1 piece1 piece
porcelainfunnels
042.01.070042.01.110
nominalvolume200 ml600 ml
innerdiameter70 mm110 mm
for filter paper diameter
70 - 90 mm110 - 125 mm
forcepsfilter paper
Manufactured from stainless steel and a perfect tool ideal for handling papers. Catalogue No: 048.04.001
www.dacchim.rotel/fax: 021 3440665
with sintered glass discfunnels
Gooch
Comprehensive range of gooch (Büchner) funnels with integral sintered glass discs.
Practical use since there is no requirement for any filter papers.
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
Highly resistant to most of the corrosive reagents including acids.
Reinforced rims are used to prevent breakage during washing and transportation.
porositygrade
34343434
nominalvolume
50 ml50 ml80 ml80 ml
125 ml125 ml500 ml500 ml
quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece
discdiameter
35 mm35 mm45 mm45 mm60 mm60 mm95 mm95 mm
type3 D3 D
11 D11 D17 D17 D25 D25 D
cataloguenumber
043.01.001043.01.002043.01.003043.01.004043.01.005043.01.006043.01.007043.01.008
analytical laboratory
with sintered glass disccrucibles
Gooch
Ideal for filtering and drying precipitates and others.
Practical use since there is no requirement for any filter papers.
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
Reinforced rims are used to prevent breakage during washing and transportation.
porositygrade
12341234
nominalvolume
30 ml30 ml30 ml30 ml50 ml50 ml50 ml50 ml
quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece
discdiameter30 mm30 mm30 mm30 mm40 mm40 mm40 mm40 mm
type1 D1 D1 D1 D2 D2 D2 D2 D
cataloguenumber
043.02.001043.02.002043.02.003043.02.004043.02.005043.02.006043.02.007043.02.008
www.dacchim.rotel/fax: 021 3440665
narrow & wide neckwash bottles
polyethylenedropping bottles
volume100 ml
amberbottles
062.04.101
quantityin pack1 piece
clearbottles
062.04.100
Manufactured from low density polyethylene.
They have a thin dropper tip that provide regular drops every time.
Amber bottles prevents UV lights penetrate inside the bottle.
volume100 ml
amberbottles
062.03.100
quantityin pack1 piece
clearbottles
062.02.100
glassdropping bottles
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
Amber bottles prevents UV lights penetrate inside the bottle.
volume100 ml250 ml500 ml
1000 ml
quantityin pack1 piece1 piece1 piece1 piece
narrowneck
062.05.100062.05.250062.05.500062.05.901
Manufactured from low density polyethylene.
They are easy to press, semi-rigid, translucent and have excellent clarity.
The stream of the liquid can be easily controlled by hand pressure.
Dispensing tip provides extra fine stream. The tip can be folded back in order to increase the flow rate whenever needed.
analytical laboratory
wideneck
062.06.100062.06.250062.06.500062.06.901
www.dacchim.rotel/fax: 021 3440665
non vacuumdesiccators
glass
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12491.
quantityin box1 piece1 piece1 piece
desiccatorsnon vacuum039.01.200039.01.250039.01.300
desiccatorsvacuum
039.02.200039.02.250039.02.300
holes numberon plate
81013
desiccatorsplate
039.05.200039.05.250039.05.300
platesdesiccator
porcelain
Manufactured from glazed porcelain which can resist temperatures up to 1000°C.
vacuumdesiccators
glass
Excellent smooth grinded flanges prevent vacuum leaks and does not need any greasing.
Desiccator vacuum stopcock is specialy designed to use under vacuum up to 10 Torr.-4
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.
They meet the highest quality standards according to DIN 12491.
analytical laboratorywww.dacchim.ro
tel/fax: 021 3440665
top related