vmc spec sheet 4-28-09
Post on 14-Jan-2022
2 Views
Preview:
TRANSCRIPT
RVMC30-D,-B,-P Medium Temp Glass Door Reach-In (D = Dairy/Deli, B=Beverage, P=Produce)
PRELIMINARY
Zero Zone, Inc. 110 N Oakridge Dr. North Prairie, WI 53153-9792 (800) 247-4496 fax (262) 392-6450
www.zero-zone.com
CrystalTM Merchandiser Specifications
Amps Watts Amps Watts Amps Watts Amps Watts Amps Watts0.15 19 0.30 38 0.45 57 0.60 76 0.75 95
Amps Watts Amps Watts Amps Watts Amps Watts Amps Watts0.22 26 0.55 66 0.73 88 0.92 110 1.10 132
Amps Watts Amps Watts Amps Watts Amps Watts Amps Watts0 0 0 0 0 0 0 0 0 0
Notes:
1. Baseline Evaporator Btuh based on parallel rack system, LED lighting, Zero Zone CoolViewTM no-energy doors, and specified fan motor.2. For condensing units (non-rack system), multiply total Btuh rating by 1.08. 3. Amps are based on electrical nameplate values, watts are based on laboratory observations of actual energy use.
Physical DataOutlet Size
(In.)
2 or 3 Door Suction Line O.D. (Top Refrig) 3/8 720 4 or 5 Door Suction Line O.D. (Top Refrig) 1/2 1,035 Liquid Line O.D. 3/8 1,195
1,47530
Specifications are subject to change without notice.
Energy Data LINE-UP DATA INDIVIDUAL CASE DATA (Includes 1 Pair of End Panels)
+28 +28 +28
3-Dr 4-Dr 5-DrM.T. M.T. M.T.
Refrigeration Per Door Avg 2-Dr
Evaporator Temperature (°F) +28 +28M.T. M.T.
Baseline Btuh w/PSC Fan Motors 1, 2 673 1,446 2,119 2,792 3,465 (see note #1 for components included in baseline Btuh)
Discharge Air Temp. (°F) (with 8°F Superheat) 33 33 33 33 33 Btuh Adders Btuh
410
Fan Motors (115V) 3
Permanent Split Capacitor (PSC) Lighting System (115V) LED Lighting (Efficient Lights)
Optional Glass-Windowed End Panel - Each
Anti-Sweat Door Heaters CoolViewTM No-Energy Doors
of Doors VCM2-Dr 30.1 58.5
107.6
Baseline R-404A Refrigeration Piping Number
3-Dr 44.9 87.24-Dr 59.7 115.9
Case designed to operate in an ambient temperature of 75° F and relative humidity of 55% or lower.
5-Dr 74.4 144.5Solid End Panel N/A N/A
134.2N/A
Packout (Ft3) 22"/24" ShelvesWeight Case Capacity
54.480.9
Facings (Ft2)
4/28/09
RVMC30-D,-B,-P Medium Temp Glass Door Reach-In (D = Dairy/Deli, B=Beverage, P=Produce)
PRELIMINARY
Zero Zone, Inc. 110 N Oakridge Dr. North Prairie, WI 53153-9792 (800) 247-4496 fax (262) 392-6450
www.zero-zone.com
CrystalTM Merchandiser Specifications
• Peg, gravity-feed & other shelving options available. • All dimensions are nominal.
4/28/09
x76 11/16"
Drain Dim.31 1/16"46 1/4"X61 1/2"X
LengthDoors62 1/8"92 1/2"
2-Dr3-Dr
5-Dr123"
153 3/8" 4-Dr
The latest innovation in medium-temp cases – the Crystal™ Merchandiser from Zero Zone. Minimizing the case and increasing the product visibility, the Crystal™ Merchandiser is a
crystal clear advantage over open multi-decks and other door cases.
Zero Zone creates innovative designs that simplify installation and maintenance for contractors while enhancing product merchandising and lowering energy usage for retailers.
Take the next step toward perfection…contact Zero Zone today.
8 0 0 . 2 4 7 . 4 4 9 6 W W W . Z E R O - Z O N E . C O M
MERCHANDISERS & SHOPPERS
• CoolView™ Doors = Panoramic Views• Easier Product Access• Wider Aisles (gain 7 inches or more)• Improved Shopping Comfort
DEPARTMENT MANAGERS & STOCKERS
• Increased Product Variety (facings)• Industry-Leading Cubic Capacity (packout)• Larger, Unobstructed Case Interior
STORE MANAGERS & DESIGN ENGINEERS
• Unparalleled Energy Efficiencyo Increase Profitabilityo Promote Sustainability
CFOS & SHAREHOLDERS
• Reduced Operating Expense (vs. open multi-decks)o 40-65% Annual Energy Savings
Example: Save $6,000 annually on 70' (lineal) of dairy
The Crystal™ Merchandiser with CoolView™ Doors showcases refrigeratedmerchandise with nothing but value-added results. Designed for your retailenvironment with sustainability in mind, our product responsibly manages resources with efficient, cost-effective operation. It’s that simple.
EVERYONE LOVES THE CRYSTAL™ MERCHANDISER...
A proud member of
w e m a k e t h e c a s e i n v i s i b l e s o y o u r p r o d u c t s p o p . ™
Zero Zone, Inc. 110 N. Oakridge Drive, North Prairie, WI 53153-9792(800) 247-4496 fax (262) 392-6450 • www.zero-zone.com
©2009 Zero Zone, Inc.
*Specifications are subject to change without notice.
70-0680
70-0679-03 3 DOOR VMC
70-0680
8.0
0
5.00 5.00 1.75
70-0680
70-0679-022 DOOR VMC
70-0680
8.0
0
5.00 5.00 1.75
USA 53153
RELEASED
CT CONTROLS 3" TALL SHROUD
SP-08222 OF 2
A4/20/2011
David Giese
(UNLESS OTHERWISE SPECIFIED)
SEE DETAILS
SEE DETAILS
UNLESS OTHERWISESPECIFIED, ALL DIMENSIONS
DESCRIPTION:
DRAWING No: REVISION
CONSENT OF ZERO ZONE, INC. IS STRICTLY PROHIBITED.REPRODUCTION OR OTHER MEANS, WITHOUT THE WRITTEN (IN LBS)
PART WEIGHT:
(PER SP-0457) STANDARDTOLERANCES:
(PER SP-0154)FINISH:
(PER SP-0404)MATERIAL:
SIZE
BSHEET
NO MANUAL REVISIONS
NOT TO SCALESCALE:
MODELED BY:
DRAWN BY:
CAD DRAWING
DOCUMENT OR DISCLOSURE OF ITS CONTENTS; BY
ARE IN DECIMAL INCH
SHEET:DATE:
COPYRIGHT INFORMATIONTHIS DRAWING AND THE INFORMATION CONTAINED WITHIN, IS THE SOLE PROPERTY OF ZERO ZONE, INC. ANY USE OF THIS
110 NORTH OAKRIDGE DRIVENORTH PRAIRIE, WISCONSIN
ZERO ZONE, INC.
REV. DESCRIPTION ECN No. DATE BYREVISION INFORMATION
A NEW ISSUE 9008 4/20/2011 DG
70-0680
70-0679-04 4 DOOR VMC
70-0680
8.0
0
5.00 5.00 1.75
70-0680
70-0679-05 5 DOOR VMC
70-0680
8.0
0
5.00 5.00 1.75
70-0679-02 70-0680
(3) 2 DOOR VMC LINE-UP
70-0680
70-0679-02
70-0680
70-0680
70-0679-02
1.75 5.00
8.0
0
5.00
12.25 OVERLAP
PROJECT
LOCATION/TYPE
FIX
TU
RE
SE
NS
OR
S &
CO
NT
RO
LS
www.wattstopper.com8 0 0 . 8 7 9 . 8 5 8 5
Features
User-adjustable sensitivity
Dual pyro covers more than 40 detection zones
The FS-705/FS-755 Wide Angle PIR Occupancy Sensors control lighting based on occupancy utilizing passive infrared (PIR) technology. The sensors provide 180 degree coverage and are designed for locations that require wide angle occupancy detection, such as refrigerator and freezer cases, vending machines and aisleway displays.
DescriptionProduct Overview
Wide Angle and Sensitivity Range
Equipped with a Fresnel lens and a unique dual pyro, the FS-705/FS-755 can cover more than 40 detection zones in all directions. Coverage is adjustable to 12 or 15 feet. When mounted at seven feet six inches above the floor, the sensor provides true 180 degree horizontal coverage and 70 degree vertical coverage to efficiently monitor the controlled area. The sensor’s time delay adjusts to one of four settings: thirty seconds, one minute, two minutes or eight minutes. Operation
The FS-705/FS-755 are self-contained devices. The FS-705 is a 24 VDC device that operates via a 120, 230 or 277 VAC WattStopper power pack, while the FS-755 is a line voltage unit operating at 120/277 VAC. By detecting the difference between infrared energy from a human body in motion and the background space within the controlled area, the sensor turns lighting systems on. When occupants leave the controlled area, it switches lighting off after the user-selectable time delay elapses.
Ideal for refrigerator and freezer cases
LED motion indicator
180° horizontal coverage
• 70 degree vertical coverage pattern• Line and low voltage options• LED indicator for occupancy detection• DIP switch simplifies sensor adjustments• RoHS compliant
• Dual pyro covers more than 40 detection zones• Coverage pattern adjustable to 12 or 15 feet
when mounted 7’6” above the floor• Time delay selectable to one of four settings (30
seconds, 1 minute, 2 minutes or 8 minutes)• 180 degree horizontal coverage pattern
FS-705/FS-755 Wide Angle PIR Occupancy Sensor
User-adjustable time delay
Applications
The FS-705/FS-755 offers excellent control of lighting for locations where wide angle coverage is needed, such as refrigerator and freezer cases, vending machines and aisleways. Its wide coverage pattern detects motion before a person reaches the display area to turn lighting on, and turns off lighting when the area is vacant for the user-adjustable time delay. In cold food aisles, one sensor is typically used per case. It is ideally suited to controlling LED lighting. Sensor performance will provide fast payback and many years of energy savings.
FIX
TU
RE
SE
NS
OR
S &
CO
NT
RO
LS
www.wattstopper.com | 8 0 0 . 8 7 9 . 8 5 8 5
FS-705 Sensor
Use FS-C1 (shown)or FS-C3 cable.
120/230/277VAC, 50/60Hz, 225mA output20A ballast or incandescent loadMotor load: 1HP@120/240VACClass 2 power supply
Model #:
BZ-50RC Power Pack
UL 2043 Plenum Rated
Santa Clara, CA • 800.879.8585
APPLIANCECONTROL
88T9
Line
Neutral
Load
Local OFF Switch
Feed-through
10' (3m)
Specifications
Coverage and Dimensions
Ordering Information
Catalog No. Description
FS-705
FS-755
FS-C1
FS-C1-20
FS-C2
FS-C2-J
FS-C3
FS-C4
FS-C5
FS-C6
BZ-50
BZ-50RC
BZ-150
Wide Angle PIR Occupancy Sensor, 24 VDC
Wide Angle PIR Occupancy Sensor, 120/277 VAC
10’ (3.048m) cable with shielded RJ45 male connectors at each end
20’ extension cable with shielded RJ45 male connectors at each end
6” (1.828m) cable with 3 flying leads at one end and a shielded RJ45 male connector on the other
RJ45 override jumper
3’ (0.914m) cable with shielded 90º male RJ45 on one end and a shielded straight male RJ45 at the other
Shielded RJ45 splitter with female to dual female receptacles
Shielded RJ45 male to male coupler
24” cable with 90° RJ45 connector and three flying leads
Univ. Volt. Power Pack, 120/230/277VAC Input, 50/60Hz, 24 VDC; 225 mA* Output w/flying leads
Univ. Volt. Power Pack, 120/230/277VAC Input, 50/60Hz, 24 VDC; 225 mA* Output w/RJ45 connector
Univ. Volt. Power Pack, 120/230/277VAC Input, 50/60Hz, 24 VDC; 225 mA* Output w/flying leads, manual/auto-on option
Pub. No. 29202 rev. 9/2009
Mounting Diagrams
NOTE: *Output is 225 mA with relay connected.
• FS-705: Power Supply: 24 VDC from WattStopper Power Pack
• FS-755: 120/277 VAC, 60 Hz• Current consumption: 7mA @ 24VDC• Weight: 2.11oz (60 grams)• Detection indication: green LED
• Operating temperature range: 32-131°F (0-55°C)
• Storage temperature range: -22-176°F (-30-80°C)• UL and CUL listed • Five year warranty
FS-705 wiring with a BZ-50RC Power Pack
FS-705 Mounting
Power Pack mounted inside or attached to j-box or other suitable enclosure
protecting line voltage connections
FS-C5 RJ45 coupler if needed
FS-C1 (10’) or FS-C3 (3’) cable
FS-705 at front edge of cabinet
Top View
47mm68mm
45m
m
22mm
1.77
”
1.85”2.68”
33mm
0.86”1.30”
Wiring
WhiteNeutral
BlackHot/Line W
hite
Red(Load)
FS-755
Mod
el:P
assive Infrared
Occup
ancy Senso
rLine Vo
ltage
120/277VAC
, 60Hz
@120VA
C 800W
max ballast
or tungsten@
277VAC
1200W m
ax ballastH
orsepower: 1/6hp
1xxxxr1
Santa C
lara, CA
800.879.8585
�=
ON �=
OFF 23
4Tim
e Delay
30 second���
5 minutes
���
10 minutes
���
20 minutes
���
1SensitivityM
inimum
Maxim
um� �
Switch Settings
88T9Appliance
Control
LISTED
GreenLighting
load
Bla
ck
Switch(optional)
FS-755 wiring
Dimensions
FS-755 centered above front edge of cabinet, behind
decorator style single-gangwall plate
FS-755 Mounting
13’
1’3’5’ (1.52m
7’9’11’(3.35m
15’(4
57m
3’ 13’
9’7’5’ (1.52m
1’
30’ x 1
5’ M
axim
um
Sensitivity
30’ x 1
5’ M
axim
um
Sensitivity
24’ x 1
2’ M
inim
um
Sen
sitivity24’ x 1
2’ M
inim
um
Sen
sitivity
Sen
11’(3.35m
15’(4.57m
15’ 15’11’ 11’(3.35m)(4.57m) (4.57m)(3.35m)(1.52m) (1.52m)
13’ 13’5’ 5’9’ 9’7’ 7’3’ 3’1’ 1’
FS-705 FS-755
33mm1.30” 22mm
0.86”
1.77’45mm
68mm
2.68” 32mm
1.28”
top related