village playset: front pieceyofreesamples.s3.amazonaws.com/wp-content/uploads/2013/12/... ·...
Post on 19-Mar-2018
240 Views
Preview:
TRANSCRIPT
Foldaway from you
Foldaway from you
FoldFold
towards youFold
towards you
Fold
Fold
Fold
Fold away from you Fold towards you
Fold Fold
Fold
Fold
Fold
Glue tab “G” behindthis piece
Glue tab “B” behindthis piece
C
D
F
E
Village Playset: Front Piece
Page 1 of 6© Disneyspoonful.com
Fold Towards
Fold
FoldFold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
FoldFold
FoldFold
Fold
Fold tabstowards you
Fold tabstowards you
Fold
Fold
Fold
Fold Fold
Village Playset: Left Side Piece, 2 Roof Pieces, Chimney Top, Chimney
Page 2 of 6
A
B
© Disneyspoonful.com
G
Foldaway from you
Glue tab “A” behind this piece
Fold
FoldFold
Fold
Foldtowards you
Fold
Fold
Fold
Village Playset: Right Side Piece & Back Piece
Page 3 of 6© Disneyspoonful.com
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold Fold
Fold
Fold
Fold Fold
Fold Fold Fold
Fold Fold Fold
Fold tabstowards you
Fold tabstowards you
Fold tabstowards you
Fold tabstowards you
Fold
Fold
Village Playset: Roof, Chimney Tops, Chimneys
Page 4 of 6© Disneyspoonful.com
Village Playset: Village Mat
Page 5 of 6© Disneyspoonful.com
Village Playset: Instructions
Cut out all the pieces of the Village Playset. This includes the buildings, chimneys, and roofs. The Village Mat will be used to help you arrange the building as it is being glued together.
On the building pieces, fold all of the lavender tabs away from you. Then, make all of the other folds as indicated on the various sheets.
Glue tab A to the blank side of the “Right Side & Back Piece.” Next, glue tab B to the blank side of the “Front Piece” (Reindeer Stables). Before you glue tabs C and D, make sure you make the awning folds, then glue tabs C and D to the blank side of the “Right Side & Back Piece.” Then, glue tabs E & F on the opposite side. Tab G is the last tab you will glue and your Christmas village take its full shape.
Fold the three roof pieces as indicated. On each piece, you will glue the four wood awning tabs to the blank side of the roof piece, creating an underside for the awning. See the diagram below.
The Chimneys should be folded and glued together to create a 3D rectangle. All chimney tabs should be folded away from you so that they face out. Put glue on the back of the lavender tabs and attach both to the roof on the indicated areas For the Chimney Tops, make all folds away from you to create a triangular shape. Put glue on the blank side of the red tabs and then attach the Chimney Tops to the Chimneys. Glue your completed structure to the Village Mat that will serve as a guide for how the village should be displayed once it is all put together. Add Christmas trees (another FamilyFun.com paper craft) and Christmas characters and then place it in a special location in your house, office, etc.!
Page 6 of 6© Disneyspoonful.com
top related