vico 590 x - two component dispenser © hÄcker automation gmbh | inselsbergstr. 17 | 99891...

VICO 590 X - Two Component Dispenser

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

Mass production mixing and dispensing

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

• fully automatic 3D dispenser• Filling, GlobTop and sealing• closed-loop linear encoded X-Y-Z positioning system, resolution 0,5 µm• volume regulated mixer head with mixing tube• 3D recognition system• optical camera system for needle position• integrated process control and optical inspection

Volume regulated mixer head LGD 2k 340

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

• volume regulated mixer head with mixing tube • dosing accuracy up to 10 nl, mixed deviation <1%• accuracy: 0,1 µl @ 6s; Cmk > 2,0 • full automatic balancing of dosing fluctuations and viscosity changes• free programmable dosing amount, dosing speed and mix proportion• integrated fill stand control• working directly out of disposable 340 ml cartridges

Accurate mixing and dispensing in one process

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

• accurate electronical regulation for every component separately• free programmable mixing proportion• compensation of different fillstands, viscosity and density• mixing variance in the statical mixing tube under 1%• no residual flow through the cartridge according to the squeeze valve

3D video recognition

• body detection via two beveled arranged cameras

• calculation of a real vectorial space position

of bodies and surfaces including height information

• inspection of bodies and detection of requested dimensions

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

Optical 3D needle measurement

• three-dimensional optical measuring of the exact needle position

• measuring in X,Y,Z with two beveled arranged cameras in the working area

• correction after every cartridge change or after request

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

Process control

• miniture camera with lighting is installed directly at the placing head • permanent monitoring of the process • good traceability via monitor

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

Process control with integrated scale

• the actual dosing amount is controlled by the precision scale (option)• automatic clearance of new cartridges• automatical and cyclical controlling during production• statistical analyses are shown directly on the monitor and are recorded in the charge files

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

Process control via integrated optical inspection

• 3D vision recognition to inspect the dosing results• programmable process break with error message• logging of the inspection results in the charge files

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

3D substrate pick up

• device with two additional rotation axes A and B• working area above 90° pivoting• 6-axial-path efficency

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

Free combinable add-on modules

• self installing drive of the add-on modules via CAN-Bus• central operation of the modules with the main console

Add-on-modules:

• automatic transport system (SMEMA or customer-specific)• needle heating, substrate heating• needle cleaning station

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com

integration in production line

• integration of the Dispenser Equipment in the production line• connection to control system• transport system standart SMEMA / Siemens • customer specific adjustments

© HÄCKER Automation GmbH | Inselsbergstr. 17 | 99891 Schwarzhausen | GermanyTel: +49 (0)36259/300 0 | Fax: +49 (0)36259/300 29

www.haecker-automation.com