vcr and micro-fit fittings - kylos...

VCR Nuts, Caps, and Plugs

Product Binder

VCR® and Micro-Fit® Fittings

Swagelok, VCR, Split-Nut, Micro-Fit- TM Swagelok Company, © 2002 Swagelok Company, Printed in U.S.A., June 2002 MI MS-10-06 R0

The product binder contains full technical data on allSwagelok VCR and Micro-Fit fittings as well as othercomplete lines of valves and fittings.

For further information, visit us at:www.swagelok.com.

Male NPT

Male NPT bulkhead

Male weld

Straight thread o-ring seal male

Tube adapter

Swagelok tube fitting bulkhead

Swagelok tube fitting

Female NPT

Bulkhead

Double male

Double male reducing

Short tube butt weld Long tube butt weld

Short automatic tube butt weld

Blind (undrilled) gland

Reducing socket weld

Socket weld

Short socket weld

Long automatic tube butt weld

1/8 to 1 in. and 6 to 18 mm sizesHigh-purity stainless steels

Available surface finishes on glands andbodies are a roughness average of 10 µin.(0.25 µm) and 5 µin. (0.13 µm) Ra.

Material heat code is stamped onglands and all shapes to ensure raw material traceability.

Markings identify manufacturer, material, and whenapplicable, the appropriate process designatoraccording to Swagelok® Ultrahigh-Purity ProcessSpecification (SC-01).

Test port at two locationsfor easy leak testing

Female threads are silver-plated to ensureeasy and consistent assembly

Precision manufactured gasketfor maximum performance

No “virtual leak” zones

Side-load retainer gasket for easy installation,minimal clearance for removal

Double female reducing

Reducing

Reducing

FemaleUnion

Union Union

Tube butt weld bulkhead

VCR to male NPT

Female nut Female Split-NutTM assembly

Cap

Short male nut(for use with short gland)

Male nut

Male Split-Nut assembly

Plug with lanyardCap with lanyard

Plug

Female UnionMale NPT

Female NPT

Swagelok tube fitting

Rotating female

Female Union

Side-load retainer styleGasket retainer assembly Non-retained style Union

Bulkhead connector

Automatic tube weld

Tube butt weld

Tube butt weld

BODIES

GLAND

MaleFemale

NUTS

UnionELBOW

VCR Metal Gasket Face Seal Fitting

CONNECTORS UNIONS ELBOWS

UNION

Tube Facing Tool and Welding SystemMicro-Fit Weld FittingsTEES

ELBOWS

CROSS TRIBOW

Union

Extended Leg

Reducing

45° UnionTribowUnion

Extended Leg Union

Extended Leg

TEE

Reducing The tube facing toolcleanly and consistentlysquares tube ends inpreparation for orbitalwelding. The weldingsystem is designed tostreamline weldingoperations and managethe total weldingprocess.

TEE CROSS

CONNECTORS ELBOW

TEE

UNION

COUPLING

ADAPTER

BUSHING

VCR Bodies

VCR Welded Assemblies VCR Gaskets VCR High-Flow Connections “H” Type

VCR Glands

Ultrahigh-PurityA variety of Micro-Fit weld fittings areavailable with controlled surface finishes,electropolished and specially cleaned tomeet Ultrahigh-Purity system require-ments. For more information, refer toSwagelok Ultrahigh-Purity ProcessSpecification (SC-01).

Rounded body block preventsinjury or damage to other components during systemfabrication or maintenance.

Laser etch markingidentifies manufacturer, material, and when applicable, the appropri-ate process designatoraccording to SwagelokUltrahigh-Purity ProcessSpecification (SC-01).

Radius junctionallows for a smooth flowtransition and is designedto eliminate pockets andentrapment zones.

Material heat code is rollstamped during firstmanufacturing operationto ensure raw materialtraceability.

Square, sharp, burr-free tube weld ends enhance alignment,maintain tube wall uniformity,and promote weld repeatability.

FeaturesCompact design

accommodates tubing systemsrequiring miniaturization.allows close component spacing.provides flow and service ratings

equal to larger weld fittingsdesigned for the same size tubing.

Dimensional consistency

Material316L VIM VAR or 316L VAR

stainless steel

MICRO-FIT316 LV

P

L-15

MICRO-FIT316 LV

P

L-15

MICRO-FIT

316 LVP

L-15

MICRO-FIT316 LV

P

L-15

MICRO-FIT316 LV

P

L-15

MICRO-FIT

316 LVP

L-15

MICRO-FIT316 LV

P

L-15

MICRO-FIT316 LV

P

L-15

MICRO-FIT316 LV

P

L-15

Reducing

MICRO-FIT316 LV

P

L-15

Available surface finishesare a roughness averageof 10 µin. (0.25 µm) and5 µin. (0.13 µm) Ra