various benefits of using heavy copper pcb

Various Benefits Of Using Heavy Copper PCB

Heavy Copper Printed Circuit Board (PCB) is a combination of processes that allows extreme copper thickness requirements to become efficient and cost effective. Heavy copper PCB is designed with 3 or more ounces of finished copper in the inner and/or outer which is known as the process of Laminated Deposition. This process uses heavy base copper that delivers consistent and reliable high power circuits.

Plating technology in heavy copper allowed a combination of plating and etching which causes in straight sidewalls and negligible undercut. Heavy Copper specializes in etching and plating techniques.

Enables the board fabricator to increase the amount of copper thickness in plated holes and via sidewalls.

This reduces layer count, low impedance power distribution, smaller footprints and potential cost savings.

The heavy copper plating generates high-current circuits and control circuits that observes the highly dense and simple beard structure. The heavy copper in the PCB also helps in connecting to the standard circuits.

It increases the endurance to thermal strains for construction purposes.

Heavy copper plating carries higher current through the board and helps to transfer heat to external heatsink. It has increased current carrying capacity.

Address: 9/F, JiaYu Building, ShaJiang Rd., SongGang, Bao’an District, Shenzhen, Guangdong, China. 518000

Tel: 0086-755-29630063

Fax: 0086-755-29970700

E-mail: sales@hitechcircuits.com

Website: http://www.hitechcircuits.com/pcb-products/heavy-copper-pcb/