valves range - press · valves range rvcx - resilient seated gate valve pn16 flange applicable...
Post on 15-Mar-2020
18 Views
Preview:
TRANSCRIPT
Valves Range RVCX - Resilient Seated Gate Valve PN16 Flange
Applicable StandardsFlanges comply with BS EN 1092-2
Valves comply with BS 5163
Face to face to BS EN 558-1 base series 3
Pressure test with BS EN12266-2003
Technical DataSize: DN50~DN300 (2"~12")
Nominal pressure: PN 16
Temperature range: 0°C~80°C
Suitable for: Water and neutral liquids
No Component Material 1 Body Ductile iron GGG40 2 Gate Ductile iron GGG40 , core fully encapsulated with EPDM rubber 3 Stem Nut Brass CZ132 4 Stem Stainless steel 316L 5 Bonnet Bolt Stainless steel 316 6 Bonnet Sealing EPDM Rubber 7 Bonnet Ductile iron GGG50 8 O-ring NBR Rubber 8 Thrust Collar Brass CZ132 9 Gate Bearing Brass CW614 10 O-ring NBR Rubber 12 Cap Ductile iron GGG50 13 Bolt Stainless Steel 316
09/14_v1
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM. Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: salesuk@ibpgroup.co.uk | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
RVCX - Resilient Seated Gate ValveEurope Code Size DN L H1 D1 D2 D3 n-φd Weight (kg)
G0050CFDBT03DE 2" 50 178 325 99 125 165 4-19 8.6
G0065CFDBT03DE 2 1/2" 65 190 360 118 145 185 4-19 11.5
G0080CFDBT03DE 3" 80 203 390 132 160 200 8-19 14
G0100CFDBT03DE 4" 100 229 430 156 180 220 8-19 18.3
G0125CFDBT03DE 5" 125 254 460 184 210 250 8-19 22
G0150CFDBT03DE 6" 150 267 540 211 240 285 8-23 30
G0200CFDBT03DE 8" 200 292 600 266 295 340 12-23 46.5
G0250CFDBT03DE 10" 250 330 740 319 355 405 12-28 78
G0300CFDBT03DE 12" 300 356 800 370 410 460 12-28 110.5
Torques (Testing at 1.1PN Pressure) unit: N.mNominal Diamater Nominal Pressure PN1.6MPa Nominal Pressure PN1.6MPa
DN Standard Torque Standard Torque50 50 5065 60 6080 75 75
100 100 100125 125 125150 150 150200 200 200250 250 250300 300 300350 325 325400 350 350450 155 155500 170 170600 235 235
Valves Range: RVCX - Resilient Seated Gate Valve
Features and Benefits:
• WRAS approved.
• Available in sizes 2-12".
• Suitable for water and neutral liquids.
• Designed to reduce friction and torque with a unique plastic guide rail.
• Designed with quality ductile iron material.
• Manufactured with 3 O-ring sealants for zero leakage.
• Constructed with a fully vulcanized wedge and corrosion resistant.
• Designed with an electrostatic Akzo Nobel epoxy powder internally and externally.
• Designed and manufactured in accordance with BS 5163
• Designed with a non rising stem to save installation space.
• Avaliable with a stem cap for buried application.
• T-Key operated.
T-key operated:
The stem square head is designed according BS5163, please check the T-key’s dimension before you used it, and according to below suggested dimensions to running the valve, to avoid overload torque to destroy the valve.
T-key Lever
Nominal Diamater DN50~DN200 DN250~DN600
T-key lever length L ≤300mm ≤550mm
T-key lever height H ≤1000mm ≤1000mm
Note: The product testing torque is smaller than the standard requirement, easier to be operated.
L
H
Valves Range RVHX F4 - Resilient Seated Gate Valves PN16 Flanged
Applicable StandardsFlanges comply with BS EN 1092-2.
Valves comply with DIN 3352-4
Face to face to DIN 3202 F4
Pressure test with BS EN12266-2003
Technical DataSize: DN50~DN300 (2"~12" )
Nominal pressure: PN 16
Temperature range: 0˚C~80˚C
Suitable for: Water and neutral liquids
No Component Material 1 Body Cast iron GGG40 2 gate Cast iron GGG40,core fully encapsulated with EPDM rubber 3 Stem nut Brass CW614 4 Stem Stainless steel 1.4021 5 Bonnet bolt Zinc coated steel 8.8 sealed with hot melt 7 Bonnet Cast iron GGG40 8 O-ring EPDM rubber 9 Thrust collar Brass CW614 10 Gate bearing Brass CW614 11 O-ring EPDM rubber 12 Handwheel Steel plate punch forming 13 Bolt Zinc coated steel 8.8 sealed with hot melt 14 Washer Zinc coated steel sealed with hot meltNotes: The valve will be operated by a handwheel, the standard direction of opening is counter-clockwise as viewed from the top of the valve.
09/14_v1
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM. Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: salesuk@ibpgroup.co.uk | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
RVHX F4 - Resilient Seated Gate Valves Europe Code Size DN L D1 D2 D3 n-φd Weight (kg)
G0050CFD4H14DE 2" 50 150 99 125 165 4-19 7.6
G0065CFD4H14DE 2 1/2" 65 170 118 145 185 4-19 10.5
G0080CFD4H14DE 3" 80 180 132 160 200 8-19 13
G0100CFD4H14DE 4" 100 190 156 180 220 8-19 17.3
G0125CFD4H14DE 5" 125 200 184 210 250 8-19 21
G0150CFD4H14DE 6" 150 210 211 240 285 8-23 29
G0200CFD4H14DE 8" 200 230 266 295 340 12-23 45.5
G0250CFD4H14DE 10" 250 250 319 355 405 12-28 75.4
G0300CFD4H14DE 12" 300 270 370 410 460 12-28 106
Torques (Testing at 1.1PN Pressure) unit: N.m Nominal Diamater Nominal Pressure PN1.6MPa Nominal Pressure PN1.6MPa
DN Standard Torque Testing Torque
50 50 40
65 60 50
80 75 60
100 100 80
125 125 100
150 150 120
200 200 160
250 250 200
300 300 240
350 325 260
400 350 280
450 155 125
500 170 135
600 235 185
Valves Range: RVHX F4 Gate Valves Resilient Seated
Specification:
• WRAS approved.
• Available in sizes 2-12".
• Suitable for water and neutral liquids.
• Designed to reduce friction and torque with a unique plastic guide rail.
• Designed with quality ductile iron material.
• Manufactured with 3-O ring sealants for zero leakage.
• Constructed with a fully vulcanized wedge and corrosion resistant.
• Designed with an electrostatic Akzo Nobel epoxy powder internally and externally.
• Designed and manufactured in accordance with DIN 3352-4.
• Designed with a non rising stem to save installation space.
• Handwheel opreated.
Note: The product testing torque is smaller than the standard requirement, easier to operated.
Valves Range RVHX F5 - Resilient Seated Gate Valve PN16 Flange
Applicable StandardsFlanges comply with BS EN 1092-2.
Valves comply with DIN 3352-4
Face to face to DIN 3202 F5
Pressure test with BS EN12266-2003
Technical DataSize: DN50~DN300 (2"~12")
Nominal pressure: PN16
Temperature range: 0˚C~80˚C
Suitable for: Water and neutral liquids
No Component Material 1 Body Cast iron GGG40 2 gate Cast iron GGG40,core fully encapsulated with EPDM rubber 3 Stem nut Brass CW614 4 Stem Stainless steel 1.4021 5 Bonnet bolt Zinc coated steel 8.8 sealed with hot melt 7 Bonnet Cast iron GGG40 8 O-ring EPDM rubber 9 Thrust collar Brass CW614 10 Gate bearing Brass CW614 11 O-ring EPDM rubber 12 Handwheel Steel plate punch forming 13 Bolt Zinc coated steel 8.8 sealed with hot melt 14 Washer Zinc coated steel sealed with hot melt
09/14_v1
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM. Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: salesuk@ibpgroup.co.uk | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
RVHX F5 - Resilient Seated Gate ValveEurope Code Size DN L D1 D2 D3 n-φd Weight (kg)
G0050CFD4H15DE 2" 50 250 99 125 165 4-19 10.6
G0065CFD4H15DE 2 1/2" 65 270 118 145 185 4-19 13.5
G0080CFD4H15DE 3" 80 280 132 160 200 8-19 16
G0100CFD4H15DE 4" 100 300 156 180 220 8-19 20.3
G0125CFD4H15DE 5" 125 325 184 210 250 8-19 24
G0150CFD4H15DE 6" 150 350 211 240 285 8-23 32
G0200CFD4H15DE 8" 200 400 266 295 340 12-23 48.5
G0250CFD4H15DE 10" 250 450 319 355 405 12-28 82
G0300CFD4H15DE 12" 300 500 370 410 460 12-28 114.5
Torques (Testing at 1.1PN Pressure) - unit: N.m Nominal Diamater Nominal Pressure PN1.6MPa Nominal Pressure PN1.6MPa
DN Standard Torque Testing Torque
50 50 40
65 60 50
80 75 60
100 100 80
125 125 100
150 150 120
200 200 160
250 250 200
300 300 240
350 325 260
400 350 280
450 155 125
500 170 135
600 235 185
Valves Range: RVHX F5 - Resilient Seated Gate Valve
Features and Benefits:
• WRAS approved.
• Available in sizes 2-12".
• Suitable for water and neutral liquids.
• Designed to reduce friction and torque with a unique plastic guide rail.
• Designed with quality ductile iron material.
• Manufactured with 3 O-ring sealants for zero leakage.
• Constructed with a fully vulcanized wedge and corrosion resistant.
• Designed with an electrostatic Akzo Nobel epoxy powder internally and externally.
• Designed and manufactured in accordance with DIN 3352-4.
• Designed with a non rising stem to save installation space.
• Handwheel operated
No component Material 1 Body Ductile Iron, GGG40 2 Wedge DI Fully Vulcanized EPDM 3 Wedge Nut Brass 4 Body SS420 5 Bolt Q235+Zinc 6 Gasket EPDM 7 Bonnet Ductile Iron GGG40 8 O-Ring EPDM 9 Bearing Brass 10 O-Ring EPDM 11 Gland Brass 12 Handwheel Q235+Epoxy Coating 13 Washer Q235+Zinc 14 Bolt Q235+Zinc
Valves Range RVHX - Resilient Seated Gate Valve PN16 Flange
Applicable Standards:Flanges comply with BS EN 1092-2.
Valves comply with BS 5163
Face to face to BS EN 558-1 base series 3
Pressure test with BS EN12266-2003
Technical DataSize: DN50~DN600 (2"~24")
Nominal pressure: PN 16
Temperature range: 0°C ~ 80°C
Suitable for: Water and neutral liquids
09/14_v1
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM. Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: salesuk@ibpgroup.co.uk | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Industrial Valves Range: RVHX - Resilient Seated Gate Valve
Features and Benefits:
• WRAS approved
• Available in sizes 2-24"
• Suitable for water and neutral liquids
• Designed to reduce friction and torque with a unique plastic guide rail.
• Designed with quality ductile iron material
• Manufactured with 3 O-ring sealants for zero leakage
• Constructed with a fully vulcanized wedge and corrosion resistant
• Designed with an electrostatic Akzo Nobel epoxy powder internally and externally
• Designed and manufactured in accordance with BS 5163
• Handwheel operated.
• Designed with a non rising stem to save installation space.
RVHX - Resilient Seated Gate ValveEurope Code Size DN L H1 D1 D2 D n-φd Weight (kg)
G0050CFDBH03DE 2" 50 178 220 99 125 165 4-19 8.6G0065CFDBH03DE 2 1/2" 65 190 240 118 145 185 4-19 11.5G0080CFDBH03DE 3" 80 203 290 132 160 200 8-19 14.0G0100CFDBH03DE 4" 100 229 330 156 180 220 8-19 18.3G0125CFDBH03DE 5" 125 254 375 184 210 250 8-19 22.6G0150CFDBH03DE 6" 150 267 420 211 240 285 8-23 30.0G0200CFDBH03DE 8" 200 292 500 266 295 340 12-23 46.5G0250CFDBH03DE 10" 250 330 610 319 355 405 12-28 87.6G0300CFDBH03DE 12" 300 356 720 370 410 460 12-28 110.5G0350CFDBH03DE 14" 350 381 920 429 470 520 16-28 207.7G0400CFDBH03DE 16" 400 406 940 480 525 580 16-31 215.8G0450CFDBH03DE 18 450 432 1150 548 585 640 20-31 387.0G0500CFDBH03DE 20 500 457 1350 609 650 715 20-34 438.0G0600CFDBH03DE 24 600 508 1500 720 770 840 20-37 621.0
Torques (Testing at 1.1PN Pressure) - unit: N.m Nominal Diamater Nominal Pressure PN1.6MPa Nominal Pressure PN1.6MPa
DN Standard Torque Testing Torque
50 50 40
65 60 50
80 75 60
100 100 80
125 125 100
150 150 120
200 200 160
250 250 200
300 300 240
350 325 260
400 350 280
450 155 125
500 170 135
600 235 185
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Applicable StandardsValves comply with BS EN 1171Flanges comply with BS EN 1092-2Face to face to BS EN 558-1 base series 3Pressure test with BS EN12266-2003
Technical DataSize: DN50~DN300 (2"~12")Nominal pressure: PN 16Temperature range: 0~80°C~Suitable for: Water and neutral liquids
No Component Material
1 Body Ductile iron GGG40
2 Wedge DI Fully Vulcanised EPDM
3 Wedge Nut Brass
4 Stem SS420
5 Bolt Q235+Zinc
6 Gasket EPDM
7 Bonnet Ductile iron GGG40
8 Stuffing Box Bylon
9 Packing EPDM
10 Bushing Brass
11 Gland Ductile iron GGG40
12 York Ductile iron GGG40
13 Driver Nut Brass
14 Handwheel Ductile iron GGG40
15 Washer Q235+Znic
16 Bolt Q235+Znic
09/14_v1
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM. Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: salesuk@ibpgroup.co.uk | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
RVRX - Resilient Seated Gate ValveEurope Code Size DN L H(open) H(close) D1 D2 D n-φd Weight (kg)
G0050CFDEH03DE 2" 50 250 374 322 99 125 165 4-19 10.6
G0065CFDEH03DE 2 1/2" 65 270 398 332 118 145 185 4-19 14.5
G0080CFDEH03DE 3" 80 280 429 350 132 160 200 8-19 18.5
G0100CFDEH03DE 4" 100 300 524 420 156 180 220 8-19 22.3
G0125CFDEH03DE 5" 125 325 721 581 184 210 250 8-19 29
G0150CFDEH03DE 6" 150 350 736 581 211 240 285 8-23 36
G0200CFDEH03DE 8" 200 400 942 736 266 295 340 12-23 54.5
G0250CFDEH03DE 10" 250 450 1143 893 319 355 405 12-28 89
G0300CFDEH03DE 12" 300 500 1325 1022 370 410 460 12-28 118.5
Torques (Testing at 1.1PN Pressure)- unit: N.mNominal Diamater Nominal Pressure PN1.6MPa Nominal Pressure PN1.6MPa
DN Standard Torque Testing Torque50 50 4065 60 5080 75 60
100 100 80125 125 100150 150 120200 200 160250 250 200300 300 240350 325 260400 350 280450 155 125500 170 135600 235 185
Valves Range: RVRX - Resilient Seated Gate Valve
Features and Benefits:
• WRAS approved.
• Available in sizes 2-12".
• Suitable for water and neutral liquids.
• Designed to reduce friction and torque with a unique plastic guide rail.
• Designed with quality ductile iron material.
• Manufactured with 3 O-ring sealants for zero leakage.
• Constructed with a fully vulcanized wedge and corrosion resistant.
• Designed with an electrostatic Akzo Nobel epoxy powder internally and externally.
• Designed and manufactured in accordance with BS EN 1171.
• Available with an external stem and yoke and visible on & off indicator.
• Handwheel operated.
top related