usman_spec _ppt

Post on 18-Aug-2015

10 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

SPEC Technology Corp.

http://www.spectechnology.com

EOCEhernet over Coax:

It is a family of technologies that supports the transmission of Ethernet frames over coaxial cable.

The technology is used to send TV plus Internet signal through a single Coaxial cable with the help of master device.

Device Required for EOC Network:

Master Slave Reverse Path Amplifier Power Pass Coxial Cable

Master:It is the outdoor EOC Master of the EOC (Ethernet Over Coaxial) solution. It is in compliant with Home Plug AV standard. speed data service to the customer based on the coaxial cable  network.  Built in high isolation filter as CATV RF & EOC signal mixer. EOC signal and CATV signal in 0~860Mz can running on one cable without interference. 

EOC MASTER

Specifications:Support bi-direction data encryption Aluminum alloy die casting shaping, good heat dissipation Outdoor waterproof designed, 60V/220V power supply optional   No influence on CATV Service. One Internet( Electrical Signal), RJ-45 Port. One TV(CATV Signal) Input, Metric/British F- Female .One CABLE(Mixed signal) Output, Metric/British F- Female.

Reverse Path Amplifier:

The age of high-speed data communications and multimedia application have dawned on cable television. It has brought with it a myriad of services such as high-speed data, video on demand, IP telephony, status monitoring, impulse pay-per- view and internet access to name a few. It has three output one for monitor and other two for signalsReturn amplifiers are employed to carry the reverse path signals (5 – 42 MHz)(signal as per customer demand)Diplex filters are used to separate the reverse signals from the forward path.A diplex filter is a Low-pass and High-pass combination.

Reverse Path Amplifier

Open image of Reverse Path Amplifier

Slave:

EOC slave use after Reverse path Amplifier at customer end.

Port Number Description

TV 1 Link to STB or TV through Cable

Cable 1 Link to CATV port through Cable

Ethernet 4 Link to computer or STB with cable

Power 1 Link to power adapter

Switch 1 Start/Close power

Description of back panel

Usman Qadir Spectechnology Corp.www.spectechnology.com

Thank You

top related