unit 3 chemical reactions menu the chemical industry hess’s law equilibrium acids and bases redox...
Post on 01-Apr-2015
218 Views
Preview:
TRANSCRIPT
Unit 3Chemical Reactions
Menu
• The Chemical Industry• Hess’s Law• Equilibrium• Acids and Bases• Redox Reactions• Nuclear Chemistry
The Chemical Industry
The Chemical Industry
Major contributor to quality of life and
economy.
The Chemical Industry
• Quality of life • Fuels (eg petrol for cars)• Plastics (Polythene etc)• Agrochemicals
(Fertilisers, pesticides etc)
• Alloys (Inc. Steel for building)
• Chemicals (eg Cl2 for water purification)
• Dyes (for clothing etc)• Cosmetics and medicines• Soaps and detergents• Etc!!!!
The Chemical Industry
• Contributes to National Economy
• Major employer of people at all skill levels
• Revenue from taxation on fuels etc
• Revenue from sales of product
• Revenue from exports of products
The Chemical Industry
• Research chemists identify a chemical route to make a new product, using available reactants.
The Chemical Industry
• Feasibility study produces small amounts of product – to see if the process will work
The Chemical Industry
• The process is now scaled up to go into full scale production.
• Process so far will have taken months.
• Many problems will have been encountered and will have to be resolved before full scale production commences
The Chemical Industry
• Chemical plant is built in a suitable site
• Operators employed
• Early production will allow monitoring of cost, safety, pollution risks, yield and profitability
The Chemical Industry
Feedstock MIXER REACTION VESSEL
SEPARATOR
PRODUCTBY-PRODUCT
Unreacted feedstocks recycled
The Chemical Industry - Feedstocks
Fossil fuelsCoal, oil and natural gas
Metallic oresHaematite to make iron,
Bauxite to make aluminium
MineralsLimestone needed in Blast furnace
AirSupplies O2 and N2
WaterCan be used as a reactanct or as a coolant or in heat exchangers.
The Chemical Industry
• Can be Continuous process• Or can be Batch Process
The Chemical Industry
• Continuous Process
• Used by big industries where large quantities of product are required
• Requires small workforce• Often automated /
computer controlled• Quality of product
checked remotely• Energy efficiency usually
good• Plants expensive to build• Plants not flexible
The Chemical Industry
• Batch Process • Make substance which are required in smaller amounts
• Process looks more like the initial reaction
• Overhaul of system needed regularly – time and energy lost if plant has to be shut down
• Plant can be more flexible
• Plant is usually less expensive to build initially
The Chemical Industry: The Costs Involved
Cost Example
Capital costs Building the plant
Road and rail links
(Usually needs a substantial bank loan)
Fixed costs(Stay the same regardless of whether plant runs at full or half capacity)
Repayment of loan
Wages, Council tax
Variable costs(Vary dependent on whether plant is running at full or half capacity.)
Cost of raw materials, and other chemicals required
The Chemical Industry
Industries can be classed as:• Labour intensive• Capital intensive
The Chemical Industry
• Service industries (Catering, education, healthcare), are labour intensive
The Chemical Industry
• Chemical industry tends to be more Capital intensive as a large investment is required to buy equipment and build plants
The Chemical Industry
• Expectations of work safety and a clean environment increase during the twentieth century
• H & S legislation protects workforce
The Chemical Industry
• Tradition is important – steel making continues in areas where it was set up even if raw materials are no longer available locally
• Transport options are important
The Chemical Industry
Choice of a particular chemical route is dependent upon:
• Cost of raw materials• Suitability of feedstocks• Yield of product• Option to recycle unreacted feedstock• Marketability of by products• Costs of getting rid of wastes, and safety
considerations for workforce and locals• Prevention of pollution
The Chemical Industry
Click here to repeat The Chemical Industry.
Click here to return to the Menu
Click here to End.
Hess’s Law
Hess’s law
• Hess’s law states that the enthalpy change for a chemical reaction is independent of the route taken.
• This means that chemical equations can be treated like simultaneous equations.
• Enthalpy changes can be worked out using Hess’s law.
Hess’s law
• Calculate the enthalpy change for the reaction: C(s) + 2H2(g) CH4(g) using the enthalpies of combustion of carbon, hydrogen and methane.
Hess’s law
First write the target equation.
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
Then write the given equations.
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
H2 + ½ O2 H2O H= -286 kJ
CH4+ 2O2 CO2 + 2H2O H=-891 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
Build up the target equation from the given equations.If we multiply we must also multiply H.If we reverse an equation we reverse the sign of H.
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
H2 + ½ O2 H2O H= -286 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
2H2 + O2 2H2O H= -572 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
2H2 + O2 2H2O H= -572 kJ
CH4 + 2O2 CO2+2H2O H=-891 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
2H2 + O2 2H2O H= -572 kJ
CO2+2H2O CH4 + 2O2 H=+891 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
2H2 + O2 2H2O H= -572 kJ
CO2+2H2O CH4 + 2O2 H=+891 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
We can add all the equations, striking out species that will appear in equal numbers on both sides.
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
2H2 + O2 2H2O H= -572 kJ
CO2+2H2O CH4 + 2O2 H=+891 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
2H2 + O2 2H2O H= -572 kJ
CO2+ 2H2O CH4 +2O2 H=+891 kJ
C + 2H2 CH4 H=(-394 –572 + 891)kJ = -75 kJ
Hess’s law
C(s) + 2H2(g) CH4(g) H=?
C + O2 CO2 H= -394 kJ
2H2 + O2 2H2O H= -572 kJ
CO2+ 2H2O CH4 +2O2 H=+891 kJ
C + 2H2 CH4 H=-75 kJ
Hess’s Law
Click here to repeat Hess’s Law.
Click here to return to the Menu
Click here to End.
Equilibrium
Dynamic Equilibrium
• Reversible reactions reach a state of dynamic equilibrium
• The rates of forward and reverse reactions are equal.
• At equilibrium, the concentrations of reactants and products remain constant, although not necessarily equal.
Changing the Equilibrium
• Using a catalyst does not change the position of the equilibrium.
• A catalyst speeds up both the forward and back reactions equally and so the equilibrium is reached more quickly.
Changing the Equilibrium
• Changes in concentration, pressure and temperature can alter the position of equilibrium.
• Le Chatelier’s Principle states that when we act on an equilibrium the position of the equilibrium will move to reduce the effect of the change.
Concentration
•Consider the equilibrium:A + B C + D
If we increase the concentration of A, we speed up the forward reaction.This results in more C and D being formed.
Concentration
• Consider the equilibrium:Br2(aq) + H2O(l) 2H+(aq) + Br-(aq) + BrO-(aq)
The solution is red-brown, due the Br2 molecules.If we add sodium bromide, increasing the concentration of Br-, we favour the RHS and so the equilibrium moves to the left.The red-brown colour will increase.
Pressure
• Remember: • 1 mole of any gas has the
same volume (under the same conditions of pressure and temperature).
• This means that the number of moles of has are the same as the volumes.
Pressure
• Increasing pressure means putting the same number of moles in a smaller space.
• This is the same as increasing concentration.
• To reduce this effect the equilibrium will shift so as to reduce the number of moles of gas.
Pressure
• Increasing pressure favours the side with the smaller volume of gas. Consider:N2O4(g) 2NO2(g) 1 mole 2 moles 1 volume 2 volumes
• If we increase the pressure we favour the forward reaction, so more N2O4 is formed.
Temperature
• An equilibrium involves two opposite reactions.
• One of these processes must release energy (exothermic).
• The reverse process must take in energy (endothermic).
Temperature
• First consider an exothermic reaction.
Exothermic Reaction
This is the distribution of molecular energy
These molecules have sufficient energy to react
Activation Energy
Now increase the molecular energy by heating
Now these can react
Increasing temperature leads to a small increasein the number of molecules with sufficient
activation energy
Temperature
• Now consider an endothermic reaction.
Endothermic Reaction
This is the distribution of molecular energy
These molecules have sufficient energy to react
Activation Energy
Now increase the molecular energy by heating
Now these can react.
Increasing temperature leads to a greater increasein the number of molecules with sufficient
activation energy
Temperature
• The percentage increase in the number of molecules with sufficient activation energy is much greater in the endothermic reaction, compared to the exothermic reaction.
• Thus both the endothermic and exothermic processes are speeded up by increasing temperature.
• However an increase in temperature has a greater effect on the endothermic process.
• Increasing temperature favours the endothermic side of the equilibrium. Consider:N2O4(g) 2NO2(g) H= +58 kJ
• If we increase the temperature we favour the forward reaction so more NO2 is formed.
The Haber Process
• The Haber process involves the preparation of ammonia from nitrogen and hydrogen.N2 + 3H2 2NH3 DH = -88 kJ
• We shall look at the factors affecting this equilibrium.
The Haber Process
N2 + 3H2 2NH3 H = -88 kJ
A catalyst of finely divided iron is used to increase the reaction speed and so shorten the time needed to reach the equilibrium.
The Haber Process
N2 + 3H2 2NH3 H = -88 kJ1 mole 3 moles 2 moles1 vol 3 vols 2 vols
4 vols 2 volsSince the RHS has a lower volume of gas than the LHS, higher pressure will favour the production of ammonia.A reaction chamber to withstand the higher pressure will cost much more.
The Haber Process
N2 + 3H2 2NH3 H = -88 kJ
Since the forward reaction is exothermic more ammonia will be produced at low temperatures.At low temperatures the reaction is very slow so the rate of production of ammonia is low.
The Haber Process
N2 + 3H2 2NH3 H = -88 kJ
To ensure maximum conversion the unreacted gases are recycled through the reaction chamber after reaction.
The Haber Process
N2 + 3H2 2NH3 H = -88 kJ
To achieve the most profitable production of ammonia the following conditions are used:iron powder as catalyst250 atmospheres pressuretemperature of 500oC - 600oC
The Haber Process
N2 + H2 MIXERREACTIONChamber
Fe catalyst
SEPARATOR
NH3
Unreacted N2 + H2
recycled
Equilibrium
Click here to repeat Equilibrium.
Click here to return to the Menu
Click here to End.
Acids and Bases
pH
• pH is a scale of acidity.• It can be measured using:• pH paper• Universal Indicator solution • A pH meter.
• We carry out an experiment where we progressively dilute acid.
Tube 110 ml 0.1 mol/l hydrochloric acid
Transfer 1 ml of acid fromTube 1
Tube 2
Add 9 mlof waterto Tube 2
Tube 2
0.01 mol/lhydrochloricacid
• Repeat this process five more times so you have a series test tubes.
1 2 3 4 5 6 7
• Concentrations are:
1 2 3 4 5 6 7[H+] 10-1 10-2 10-3 10-4 10-5 10-6
10-7
• Add Universal Indicator:
1 2 3 4 5 6 7[H+] 10-1 10-2 10-3 10-4 10-5 10-6
10-7
pH 1 2 3 4 5 6 7
• Look for a relationship between the concentration of acid and the pH.
• If [H+] = 10-x
• pH = x
• We repeat the experiment but this time we progressively dilute alkali.
Tube 110 ml 0.1 mol/l sodium hydroxide
• You now have five test tubes, numbered as below.
13 12 11 10 9 8 7
• Concentrations are:
[OH-] 10-1 10-2 10-3 10-4 10-5 10-6 10-
7
13 12 11 10 9 8 7
• Add Universal Indicator:
13 12 11 10 9 8 7[OH-] 10-1 10-2 10-3 10-4 10-5 10-6 10-7
pH 13 12 11 10 9 8 7
• Look for a relationship between the concentration of alkali and the pH.
• If [OH-] = 10-y
• pH = 14-y
[H+] mol/l
pH [OH-] mol/l
pH
10-1 1 10-1 13
10-2 2 10-2 12
10-3 3 10-3 11
10-4 4 10-4 10
10-5 5 10-5 9
10-6 6 10-6 8
10-7 7 10-7 7
• If we look at water, pH=7• [H+] = [OH-] = 10-7 mol/l
[H+] x [OH-] = 10-14 mol2/l2
This is due to the equilibrium in water:
H2O(l) H+(aq) + OH-(aq)
• For any solution [H+] x [OH-] = 10-14 mol2/l2
• Thus we can find [H+] for any solution.
• What is [H+] of a solution with pH 10? [OH-] = 10-4 mol/l [H+] x 10-4 = 10-14 mol2/l2
Thus [H+] = 10-10
Strong and Weak Acids
• A strong acid is one which completely dissociates in solution:HCl(aq) H+(aq) + Cl-(aq)
• A weak acid is one which partially dissociates in solution:
CH3CO2H(aq)H+(aq) + CH3CO2-
(aq)
• We can compare eqimolar solutions of strong and weak acids e.g. 0.1 mol/l hydrochloric acid and 0.1 mol/l ethanoic acid.
• We compare pH, conductivity, reaction rates and stoichiomery.
Test 100 ml 0.1 mol/l HCl
100 ml 0.1 mol/l CH3CO2H
pH 1 3
Conductivity
Very high Low
Rate of reaction
Fast Slow
Stoichiomery
Reacts with 0.4 g NaOH
Reacts with 0.4 g NaOH
• The differences between the properties of strong and weak acids are caused by the fact that weak acids contain many fewer H+ ions than strong acids.
• Both acids can produce the same number of H+ ions, its just that weak acids do so more slowly.
Weak Acids
• Solutions of ethanoic acid, carbon dioxide and sulphur dioxide are weak acids.
CH3CO2H(aq)H+(aq) + CH3CO2-(aq)
CO2(g) + H2O(l) H2CO3(aq)
H2CO3(aq) 2H+(aq) + CO32-(aq)
SO2(g) + H2O(l) H2SO3(aq)
H2SO3(aq) 2H+(aq) + SO32-(aq)
Strong and Weak Bases
• A strong base is one which completely dissociates in solution:NaOH(aq) Na+(aq) + OH-
(aq)• A weak base is one which
partially dissociates in solution:NH4OH(aq)NH4
+(aq) + OH-(aq)
• We can compare eqimolar solutions of strong and weak bases e.g. 0.1 mol/l sodium hydroxide and 0.1 mol/l ammonium hydroxide.
• When we compare pH, conductivity, reaction rates and stoichiomery we find similar results to the comparison of weak and strong acids.
Weak Bases
• A solution of ammonia is a weak base.
NH3(g) + H2O(l) NH4OH(aq)
NH4OH(aq) NH4+(aq) + OH-
(aq)
Acids + Bases
• A strong acid and a strong base produce a salt which is neutral.
• A strong acid and a weak base produce a salt which is acidic.
• A weak acid and a strong base produce a salt which is basic.
Basic Salts
Basic Salts
• Sodium carbonate is completely ionised.
Basic Salts
• Sodium carbonate is completely ionised.Na2CO3(aq) 2Na+(aq) + CO3
2-
(aq)
Basic Salts
• Sodium carbonate is completely ionised.Na2CO3(aq) 2Na+(aq) + CO3
2-
(aq)Water is also present.
Basic Salts
• Sodium carbonate is completely ionised.Na2CO3(aq) 2Na+(aq) + CO3
2-
(aq)Water is also present. H2O(l) H+(aq) + OH-(aq)
Basic Salts
• Sodium carbonate is completely ionised.Na2CO3(aq) 2Na+(aq) + CO3
2-
(aq)Water is also present. H2O(l) H+(aq) + OH-(aq)
The ions set up an equilibrium.
Basic Salts
• Sodium carbonate is completely ionised.
Na2CO3(aq) 2Na+(aq) + CO32-(aq)
Water is also present. H2O(l) H+(aq) + OH-(aq)
The ions set up an equilibrium.2H+(aq) + CO3
2-(aq) H2CO3(aq)
Basic Salts
• This removes of H+(aq) from water. H2O(l) H+(aq) + OH-(aq)
Basic Salts
• This removes of H+(aq) from water. H2O(l) H+(aq) + OH-(aq)
The OH-(aq) left behind make the resulting solution basic.
Acid Salts
Acid Salts
• Ammonium chloride is completely ionised.
Acid Salts
• Ammonium chloride is completely ionised.
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Acid Salts
• Ammonium chloride is completely ionised.
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Water is also present.
Acid Salts
• Ammonium chloride is completely ionised.
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Water is also present. H2O(l) H+(aq) + OH-(aq)
Acid Salts
• Ammonium chloride is completely ionised.
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Water is also present. H2O(l) H+(aq) + OH-(aq)
The ions set up an equilibrium.
Acid Salts
• Ammonium chloride is completely ionised.NH4Cl(aq) NH4
+(aq) + Cl-(aq)
Water is also present. H2O(l) H+(aq) + OH-(aq)
The ions set up an equilibrium. NH4
+(aq) + OH-(aq) NH4 OH(aq)
Acid Salts
• This removes of OH-(aq) from water. H2O(l) H+(aq) + OH-(aq)
Acid Salts
• This removes of OH-(aq) from water. H2O(l) H+(aq) + OH-(aq)
The H+(aq) left behind make the resulting solution acidic.
Acids and Bases
Click here to repeat Acids and Bases.
Click here to return to the Menu
Click here to End.
Redox Reactions
Redox
• An oxidation reaction is one where electrons are lost.
Zn(s) Zn2+(aq) + 2e• A reduction reaction is one where
electrons are gained.Cu2+(aq) + 2e Cu(s)
• A redox reaction is one in which both oxidation and reduction are occurring.
Zn(s) + Cu2+(aq) Zn2+(aq) + Cu(s)
Redox
• An oxidising agent is a substance which accepts electrons.
• This means that an oxidising agent must itself be reduced.
Redox
• A reducing agent is a substance which donates electrons.
• This means that a reducing agent must itself be oxidised.
Redox
• We should be able to recognise oxidising and reducing agents from the reaction equation.
• 5Fe2+ + MnO4- + 8H+
5Fe3+ + Mn 2+ + 4H2O
• Fe2+ is oxidised to Fe3+ so MnO4– acts as an oxidising agent.
Writing Ion-Electron Equations.
• Simple equations can be obtained from the data booklet.
• More complex equations are written using the following routine.
Writing Ion-Electron Equations.
• Write the reactants and products.2IO3
- I2
• Add H2O to the side with less oxygen.
2IO3- I2 + 6H2O
• Add H+ to the other side.2IO3
- + 12H+ I2 + 6H2O
• Balance charge by adding electrons.2IO3
- + 12H+ + 10e- I2 + 6H2O
Combining Oxidation and Reduction
Equations.• Combining the ion-electron
half equations produces the overall reaction equation.
• This must be done so that the number of electrons on opposie sides are equal, and so cancel each other out.
Combining Oxidation and Reduction
Equations.• Oxidation
Combining Oxidation and Reduction
Equations.• Oxidation
2IO3- + 12H+ + 10e- I2 +
6H2O
Combining Oxidation and Reduction
Equations.• Oxidation
2IO3- + 12H+ + 10e- I2 +
6H2O
• Reduction
Combining Oxidation and Reduction
Equations.• Oxidation
2IO3- + 12H+ + 10e- I2 +
6H2O
• ReductionSO3
2- + H2O SO42- +2H+ + 2e-
Combining Oxidation and Reduction
Equations.• Oxidation2IO3
- + 12H+ + 10e I2 + 6H2O
• Reduction multiplied by 55SO3
2- + 5H2O 5SO42- +10H++
10e
Combining Oxidation and Reduction
Equations.• Add the equations
2IO3- + 12H+ + 10e I2 + 6H2O
5SO32- + 5H2O 5SO4
2- +10H++ 10e
2IO3- + 2H+ + 5SO3
2- I2 + H2O + 5SO4
2- We now can extract the mole relationship – 2 moles iodate react with 5 moles of sulphite
Redox Titrations.
• These can be carried out to calculate concentration.
• Many use permanganate or starch/iodine reactions which are self-indicating – the colour change of the reaction tells you when the end point is reached.
Redox Titrations.
• It was found that 12.5 ml of of 0.1 mol/l acidified potassium dichromate was required to oxidise the alcohol in a sample of 1 ml of wine.
• Calculate the mass of alcohol in 1 ml of wine.
Redox Titrations.
• Equations:Cr2O7
2-+14H+ + 6e 2Cr 3+ + 7H2O
C2H5OH + H2O CH3COOH +4H++4eMole Relationship2 moles dichromate react with 3 moles ethanol1 mole dichromate react with 1.5 moles ethanol
Redox Titrations.
12.5 ml of 0.1 mol/l dichromate contain 0.0125x0.1 moles dichromate.1.25x10-3 molesMoles of alcohol = 1.25x10-3 x1.5
= 1.875x10-3
Mass of alcohol = 46 x 1.875x10-3 g = 0.08625 g
Electrolysis
• Electrolysis takes place when electricity is passed through an ionic liquid.
• Chemical reaction take place at the electrodes – reduction at the negative electrode and oxidation at the positive electrode.
Electrolysis
• The electrode reactions can be represented by ion electron equations.
• In the electrolysis of nickel(II) chloride the reactions are:+ electrode 2Cl- Cl2 + 2e
- electrode Ni2+ + 2e Ni
Electrolysis
+ electrode 2Cl- Cl2 + 2e
- electrode Ni2+ + 2e Ni• In both of these ion electron
equations one mole of product is produced by two moles of electrons.
The Faraday
• To find the value for one mole of electrons multiply Avogadro’s number by the charge on the electron (1.6x10-
19 coulombs)• One mole of electrons is called
a Faraday and is 96,500 coulombs.
The Faraday
• Using the value for the Faraday and the equation:
• Charge = Current x Time (Coulombs) (Amps) (Seconds) we can carry out many calculations.
Redox Reactions
Click here to repeat Redox Reactions.
Click here to return to the Menu
Click here to End.
Nuclear Chemistry
Stable nuclei
• Nuclei contain protons and neutrons.
• Energy is needed to hold these particles together.
• We can plot the number of protons against the number of neutrons.
Stable nuclei
Number of protons v number of neutrons
0
50
100
150
0 20 40 60 80 100
protons
neut
rons
Stable nuclei
• All stable nuclei fit in a narrow band
• Some nuclei are unstable because they need too much energy to hold them together.
• Thus they split apart, sending out some small particles.
Radioactive decay
Particle Symbol Nature Stopped by
alpha Sheet of paper
beta Few cm of aluminium
gamma radiation Many cms of lead
e01
He42
decay
decay takes place when the nucleus ejects a helium nucleus.
• This causes a change in the nucleus. HeYX M
AMA
42
42
HeThU 42
23590
23992
decay
decay takes place when the nucleus ejects an electron.
• This causes a change in the nucleus.
eQP MA
MA
011 eNC 01
147
146
decay
decay takes place when the nucleus loses energy.
• This is the extra energy which is no longer needed to hold the nucleus together.
Nuclear Equations
• When we write a nuclear equation the sum of the mass numbers and atomic numbers on each side must be equal.
nMoTenPu 10
10042
13752
10
23994 3
nMoTenPu 10
10042
13752
10
23994 3
Half life
• Half life is the time which it takes for the radioactivity to half.
• For any radioactive substance this time is constant.
Half life
• The decay of individual nuclei within a sample is random and is does not depend of chemical or physical state of the element.
• Half lives of individual elements may vary from seconds to thousands of years.
Half life
• Calculations involving half life usually involve precise fractions e.g.
• 3H is a b-emitting isotope with a half life of 12.3 years. How long will it take for the radioactivity of a sample to drop to 1/8 of its original value?
Half life
• 3H is a b-emitting isotope with a half life of 12.3 years. How long will it take for the radioactivity of a sample to drop to 1/8 of its original value?
• Time 12.3 y 24.6y36.9y
• Fraction ½ ¼ 1/8
Half life
• For examples where the numbers are more complex the quantity of radioactive material against time is best estimated from a graph.
Half life
0
20
40
60
80
100
120
1 2 3 4 5 6 7 8 9 10 11 12
Series1
Time
Activity
The Nuclear Chemistry
Click here to repeat Nuclear Chemistry.
Click here to return to the Menu
Click here to End.
The End
Hope you found the revision useful.
Come back soon!!
top related