uncertainty in measurement professor bob kaplan university department of science 1

Uncertainty in Measurement Professor Bob Kaplan University Department of Science

1

Limitations of the Instrument

Individual Skill

Random Conditions

( not under control )

2

Numbers reported should have:

1)  All Digits Known

2)  One Estimated Digit

3

All known digits

andEstimated digit

( uncertain digit )

4

5

6

7

Smallest unit of measurement

on glassware, ruler, scale, etc.

Place value of increment or unit

in the reported number.

8

Degree of uncertainty generally depends on the smallest division or increment of the measuring instrument used (e.g. ruler, graduated cylinder, etc.).

But it also depends on:

Skill of the individual

One person may feel comfortable splitting the

Division in half ( +/- 0.5 unit )

Another person may feel confident splitting the

Division in tenths ( +/- 0.1 unit )

9

10

Reported number: 34.746 meters

Uncertainty level: +/- 0.001 meters

= +/-- 1 mm

Reported number: 34.73579 meters

Uncertainty level: +/- 0.00001 meters

= +/-- 0.01 mm

11

In measured numbers, the “sig figs” include:

All the reported numbers including

the estimated digit.

When we do calculations, we will need to count the significant figures in each of the numbers used .

In each individual number,

all non-zero numbers are counted as “sig figs”.

Zeros may or may not be significant,

depending on their position in the number.

12

Zeros between integers

Always significant  [ e.

g. 1004 ] 13

Zeros that precede

integers in decimals

Never

significant  [ e.g.  0.0001234

]  

14

Zeros that follow integers -

End of a number

Never

significant  [ e.g.

1,004,000 ]     

15

The purpose of significant figures is to tell

you where to round off the number.

If the first digit to be dropped is 4 or less,

it and all the following digits

should be dropped.

If the first digit to be dropped is 5 or greater,

the last retained digit of the number is

increased by 1.

16

Answer can be no more precise

than the least precise quantity.

Example: Solution of nitric acid that is precise to

+/-0.0001 molarity (moles / liter).

Mix that with another solution that was

not measured precisely at all.

Is the precision of my original solution retained ?

Of course not !!!!

17

Result should contain the same number of sig figs

as the measurement that has the least number of

sig figs.18

3 * 1, 465, 876 = 4, 000,000

3 * 1.465876 = 4.0

32 * 550 = 17,600 = 18,000

32 * 560 = 18,920 = 19,000

32 * 568 = 18,176 = 18,000

32 * 575 = 18,400 = 18,000

32 * 580 = 18,560 = 19,000

19

“Limiting term” :

Term with fewest

decimal places.

The result is rounded off the

same as number with

fewest decimal places.

20

57898.32

+ 33.34567

_____________

57931.66

57931.67

21

Consider the number: 564.32

What is the place value of the 5 ?

Hundreds is correct

In a number like 564.32, what single thing determines the uncertainty ???

Last number (or digit) is correct !!

22

What about the last digit is important ???

Place Value !

What is the place value of the last digit

in the number 546.32 ?

Hundredths

So what is the level of uncertainty ????

+/- .01

23

Precision :

Measures repeatability

Accuracy :

Distance from true value 24

True value:

32.146

Accurate measurements:

32.132 , 32.150 , 32.161

Precise measurements:

36.456 , 36.468 , 36.345

25

Systematic Error

Instrumentation

Calibration

Standards of

Measurement 26

If you have come here directly from the SC155 Seminar session, please return to the KU course platform now to continue with the live session of discussion, questions and answers

See you all there !27