uml tutorial (1) (1)
Post on 13-Apr-2017
205 Views
Preview:
TRANSCRIPT
150406_003
My Recording
null
604812
Course title System analysis and design
Project on UML Use CASE diagram
Instructor PROF Noor Azian Mohamad Ali
Prepared by Jamilah Osama Rashid
G1412330
Does Use Case mean
Defining interaction between people and technology as functional requirements for IT application
The first slide shows how to open your Star UML
To start your UML Use case ( Go to your short cut of UML installation on your desktop or in any drive that you saved it)
Procedures to use case for diagram construction
From the above slide we can see five items choose UML components approach then ok
Drag your pointer to Package from the Toolbox Click on it then bring your mouse to the blank surface then drag it to demarcate your package
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Course title System analysis and design
Project on UML Use CASE diagram
Instructor PROF Noor Azian Mohamad Ali
Prepared by Jamilah Osama Rashid
G1412330
Does Use Case mean
Defining interaction between people and technology as functional requirements for IT application
The first slide shows how to open your Star UML
To start your UML Use case ( Go to your short cut of UML installation on your desktop or in any drive that you saved it)
Procedures to use case for diagram construction
From the above slide we can see five items choose UML components approach then ok
Drag your pointer to Package from the Toolbox Click on it then bring your mouse to the blank surface then drag it to demarcate your package
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Does Use Case mean
Defining interaction between people and technology as functional requirements for IT application
The first slide shows how to open your Star UML
To start your UML Use case ( Go to your short cut of UML installation on your desktop or in any drive that you saved it)
Procedures to use case for diagram construction
From the above slide we can see five items choose UML components approach then ok
Drag your pointer to Package from the Toolbox Click on it then bring your mouse to the blank surface then drag it to demarcate your package
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
The first slide shows how to open your Star UML
To start your UML Use case ( Go to your short cut of UML installation on your desktop or in any drive that you saved it)
Procedures to use case for diagram construction
From the above slide we can see five items choose UML components approach then ok
Drag your pointer to Package from the Toolbox Click on it then bring your mouse to the blank surface then drag it to demarcate your package
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
To start your UML Use case ( Go to your short cut of UML installation on your desktop or in any drive that you saved it)
Procedures to use case for diagram construction
From the above slide we can see five items choose UML components approach then ok
Drag your pointer to Package from the Toolbox Click on it then bring your mouse to the blank surface then drag it to demarcate your package
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Procedures to use case for diagram construction
From the above slide we can see five items choose UML components approach then ok
Drag your pointer to Package from the Toolbox Click on it then bring your mouse to the blank surface then drag it to demarcate your package
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Drag your pointer to Package from the Toolbox Click on it then bring your mouse to the blank surface then drag it to demarcate your package
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
From the icons firstly select and click on PACKAGE then drag your mouse to the first page of your UML
Then change the package to subjectrsquos name
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Rename the package( such as business electronic etc)
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Select actor (click on it from the toolbox at your left side)
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Donrsquot use block when you are selecting the items Look at small red padlock it means block Otherwise you would not be able to adjust
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Click on the surface of UML ( the actor would appear )
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Then you will need to give name to your actor (such as customer passenger students etchellip)
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
In case that you have more than one actors (follow the same step to create another actor)
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
As you can see above both actors are named ( Tour Guide and Passenger)
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
In order to create a case ( move your mouse to toolbox then select Use Case )
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Then click on your package it will appear immediately in it
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Then you have to rename your case (in the above I used Information as first case )
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
You can have more than one or two cases however you have to name them respectively
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
As you can see now in the above table (I have seven cases) Follow the same process but name them for clarification
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Here you can see that I am trying to rearrange the cases ( To do this click on the case you need to move then drag it)
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
From here you can start joining it together ( By looking at your toolbox you will find different arrows therefore choose the correct arrow to join actor and case or cases together )
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
I select generalisation (Because tour guide is general in term of his attendance to the passengers Therefor all passengers have mutual asses to tourist guides) Drag the arrow between the two
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Then it would appear as you can see in above diagram
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Then look for the relationship between tour guide and information(I selected association to show their relationship)
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
(I select direct association to show the relation between the passenger and registrar in to Hajj or Umrah )
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
I used direct association for information and registrar since they are directly associate
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
I used direct association for registrar and cashier since they are directly associate
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
If you want to copy the whole diagram (click on it the chose edit) hellipanother toolbox will come out then select copy diagram ( not only copy )
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
To make the diagram clean and clear I copy the passenger and paste at the middle Then I used direct association to show the relation with the group checking I used this because passengers have a direct association to checking point
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
I tried to use (extend) to connect luggage withthe passenger but it show me the following box in the below slide
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
The UML system would reject it
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Then I used association to connect luggage with the passenger then it works perfectly
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
The connection of the passenger and luggage is shown here using association
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
In order to copy your work click on the surface ( left click ) then chose edit the select copy diagram as shown above
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
It would appear like this then you can paste as shown below
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
This is full copy of whole process to perform your Umrah
May Allah make it easy for all Inshallah see you all there
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
PROCEDURES FOR HAJ J AND UMURAH
TOUR GUID
Passanger
Information
Registrar ( HAJ J or UMRAH)
Cashier
Group Checking
Individual Checking
Luggages Checking
Security Checking
Passanger
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
Choose or create folder to save your project
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
- Slide 1
- Slide 2
- Slide 3
- Slide 4
- Slide 5
- Slide 6
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- Slide 16
- Slide 17
- Slide 18
- Slide 19
- Slide 20
- Slide 21
- Slide 22
- Slide 23
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- Slide 28
- Slide 29
- Slide 30
- Slide 31
- Slide 32
- Slide 33
- Slide 34
- Slide 35
- Slide 36
- Slide 37
- Slide 38
- Slide 39
- Slide 40
- Slide 41
- Slide 42
- Slide 43
- Slide 44
- Slide 45
- Slide 46
- Slide 47
- Slide 48
-
top related