ultrasonic reference blocksmanual and computer controlled units available in floor and bench top...
Post on 22-Feb-2020
4 Views
Preview:
TRANSCRIPT
Ultrasonic Reference Blocks
Custom and Standard Test Blocks for Nondestructive Testing
© Applied Test Systems, Inc. 2007 2 http://www.atspa.com
Introduction 3
IIW Type 1 Calibration Block 4
Miniature Angle Beam (ROMPAS) Calibration Block 4
Distance Calibration (DC) Block 4
IIW Type 2 Calibration Block 5
Distance / Sensitivity Calibration (DSC) Block 5
Sensitivity Calibration (SC) Block 5
Distance / Sensitivity (DS) Calibration Block 6
AWS Resolution (RC) Block 6
Miniature Resolution Block 6
Step Wedges / Thickness Gauges 7
30 FBH Resolution Reference Block 7
IOW Beam Profile Block 7
Navships Test Block 8
ASME N-625 Reference Plate 8
ASME Basic Calibration Block 8
ASTM Area Amplitude Blocks (set of 8) 9
ASTM Distance / Area-Amplitude Blocks (set of 10) 9
ASTM Distance-Amplitude #3, #5, #8 FBH Blocks (set of 19)
9
EDM Notches 10
Other Quality Products 11
Contact Information 12
© Applied Test Systems, Inc. 2007 3 http://www.atspa.com
Ultrasonic Reference Blocks from ATS Quality Products for precision applications Our quality test blocks are manufactured in accordance to MIL-I-45208A and MIL-C-45662A. Reference Blocks are serialized and supplied with certification traceable to the National Institute of Standards and Technology (NIST) and available in English and metric units. ASTM blocks are supplied with a DAC Report. All certifications are permanently kept on file for easy customer reference. Our standard, off the shelf Reference Blocks are available in 1018 Steel, 7075-T6 Aluminum, and 304 Stainless Steel. Other materials are available upon request, contact ATS for more information. Custom Solutions
Custom Certifications: Custom Materials:
• Raw Material Certification • 100% Dimensional Certification • Surface Finishing • Plating Thickness • Material Velocity • Index Point Verification according to
specification
• Inconel ® • Titanium • Carbon Steel • other Stainless Steels • Aircraft Alloys • Super Alloys • other grades of Aluminum • Copper • Brass
Custom Logo:
Custom engraving is available
Contact ATS for a quote on all your custom needs.
© Applied Test Systems, Inc. 2007 4 http://www.atspa.com
Specifications: ASTM E164, MIL-STD-2154. Calibration Function: Straight Beam - Distance, Amplitude, Resolution, Horizontal linearity. Angle Beam - Sweep length, index point, sound path in wedge, sound path angle (35º—80º).
Specifications: U.S.A.F. T.O. 33B-1-1, ASTM E164. Calibration Function: Straight Beam - Distance Angle Beam - Index point, Sound path angle (30º - 70º).
Specifications: ASTM E164, AASHTO / AWS D1-5-95 Calibration Function: Straight Beam - Distance, Amplitude. Angle Beam - Index point, Distance.
IIW Type 1 Calibration Block
Miniature Angle Beam (ROMPAS) Calibration Block
Distance Calibration (DC) Block
© Applied Test Systems, Inc. 2007 5 http://www.atspa.com
Specifications: U.S.A.F. T.O. 33B-1-1 (6-1-84). Calibration Function: Straight Beam - Sensitivity, Distance, Resolution, Horizontal linearity. Angle Beam - Beam index, Sound path angle, Distance time base, Distance sensitivity curve.
Specifications: ASTM E164, AASHTO / AWS D1-5-95 Calibration Function: Straight Beam - Distance, Amplitude Angle Beam - Index point, Sound path angle (45º - 70º), Distance, sensitivity.
Specifications: ASTM E164, AASHTO / AWS D1-5-95 Calibration Function: Angle Beam - Sound path angle (45º, 60º, 75º) sensitivity.
IIW Type 2 Calibration Block
Distance / Sensitivity Calibration (DSC) Block
Sensitivity Calibration (SC) Block
© Applied Test Systems, Inc. 2007 6 http://www.atspa.com
Specifications: ANSI, AASHTO / AWS D1-5-95 Calibration Function: Straight Beam - Distance horizontal linearity, sensitivity.
Specifications: ANSI, AASHTO / AWS D1-5-95 Calibration Function: Angle Beam - Angle Beam resolution (45º, 60º, 70º).
Specifications: None Calibration Function: Straight Beam - Sensitivity, Resolution, Distance amplitude correction.
Distance / Sensitivity (DS) Calibration Block
AWS Resolution Calibration (RC) Block
Miniature Resolution Block
© Applied Test Systems, Inc. 2007 7 http://www.atspa.com
Specifications: ASTM E797 Calibration Function: Straight Beam - Thickness and Linearity Calibration, Thickness gauging, Specials quoted upon request.
Specifications: ASTM E127, ASTM E428 (Hole Dimensions Only). Calibration Function: Straight Beam - Sensitivity, Resolution, Flaw size, Flaw depth.
Specifications: BS 2704: 1978 Calibration Function: Angle Beam - Beam profile (45º, 60º, 70º), Probe angle.
Step Wedges / Thickness Gauges
30 FBH Resolution Reference Block
IOW Beam Profile Block
© Applied Test Systems, Inc. 2007 8 http://www.atspa.com
Specifications: MIL-STD-271F (SH) -6-27-86, Navships 0900-006-3010 Sec. 6. Calibration Function: Angle Beam - Sensitivity.
Specifications: ASME Boiler & Pressure Vessel Code, Section III ...Nuclear Vessels, 1965. Calibration Function: Straight …..Sensitivity. Angle Beam ….. Sensitivity. Surface Wave ….. Sensitivity.
Specifications: Other Figures available from Section V, Article 5 are available upon request. • ASME Section V, Article 5, Fig.
434.2.1-2007 • Weld Thickness 3/4” to 1” 1” to 2” 2” to 4”
Navships Test Block
ASME N-625 Reference Plate
ASTM Basic Calibration Block
© Applied Test Systems, Inc. 2007 9 http://www.atspa.com
Specifications: ASTM E127, ASTM E428. Calibration Application: Determining the relationship between flaw size and echo amplitude.
Specifications: ASTM E127, ASTM E428 Calibration Application: Determining Dead Zone, Sensitivity, Distance and Area Amplitude.
Specifications: ASTM E127, ASTM E428 Calibration Application: Determining relationship between metal distance and signal amplitude.
ASTM Area Amplitude Blocks (set of 8)
ASTM Distance / Area - Amplitude Blocks (set of 10)
ASTM Distance - Amplitude #3, #5, #8 FBH Blocks (set of 19)
Metal Path (In.)
Hole Dia. 1/64 in.
3.000 1
3.000 2 3.000 3 3.000 4 3.000 5 3.000 6 3.000 7 3.000 8
Hole Dia. (In.) 3/64, 5/64, 8/64 Metal Path (In.)
0.063, 0.125, 0.250, 0.375, 0.500, 0.625, 0.750, 0.875, 1.000, 1.250, 1.750, 2.250, 2.750, 3.250, 3.750, 4.250, 4.750, 5.250, 5.750.
Metal Path (In.)
Hole Dia.
(1/64 In.)
Metal Path (In.)
Hole Dia.
(1/64 In.) 3.000 3 1.500 5 0.125 5 3.000 5 0.250 5 6.000 5
0.500 5 3.000 8 0.750 5 6.000 8
© Applied Test Systems, Inc. 2007 10 http://www.atspa.com
EDM Notches by ATS As thin as a human hair …… Precision machined widths from 0.0015 in. ATS produces notch standards in the materials, dimensions, and locations you specify.
• For Ultrasonic and Eddy Current Standards
• Internal, External Notches • Special EDM Notch Standards and Flat
Bottom Hole Standards • Custom made to order in a wide variety
of materials including Inconel Alloys, Titanium, Tool Steels, etc.
• Various configurations available including longitudinal, circumferential, and v-shaped notches with straight or radius corners
• Certification reports • Replicas furnished
Industries Served
• Steel, gas, and oil industry • Nuclear industry • Roller bearing applications • Turbine industry
© Applied Test Systems, Inc. 2007 11 http://www.atspa.com
Lab Furnaces Industrial Furnaces Furnace Heating Elements
Temperatures to 1800ºC (3272ºF)
Tube, Split,
and Box Types
Accessories &
Custom Furnaces Available
EHS Electro Heat Systems Temperatures to 1800ºC
(3272ºF)
Standard & Custom Box
Types
EHS Electro Heat Systems Temperature Ratings 1010ºC to
1204ºC (1850ºF to 2200ºF)
Standard and Custom Elements
Universal Testing Machines Grips & Fixtures
Manual and computer controlled units available in floor and bench top models.
• Tension • Compression • Shear • Flexure
Choose from a selection of grips and fixtures available in capacities from 1,000 to 70,000 lbs. Other accessories available.
(Right) 1600 Computer controlled Universal Testing Machine
Extensometers
Choose from various types of extensometers used to test metals, ceramics, and plastics. Extensometers are also available for the following applications: • Averaging • Alignment checking • Crack opening
displacement • High temperature
SHRP Asphalt Binder Testing Equipment
• Pressure Aging Vessels • Bending Beam
Rheometers • Direct Tension Test
Systems • Vacuum Degassing Ovens
Creep Testing Systems
Systems for your tensile, compression, and stress/relaxation
testing needs • Lever Arm Tester
(load capacity to 50,000 lbs.)
• Direct Load Tester (load ca-pacity to 50,000 lbs.)
Copyright © 2007 Applied Test Systems, Inc. Rev. 10/07
154 East Brook Lane Butler, PA 16002
Phone: (724) 283-1212
Toll-Free: (800) 441-0215 Fax: (724) 283-6570
Email: sales@atspa.com http://www.atspa.com
Sealant Testing Equipment
Applied Test Systems, Inc. has been supplying quality test
equipment and superior services for the plastic pipe industry for
more than 35 years. We offer a full line of quality pipe/pressure testing systems, fixtures, end
caps, and accessories. Our test-ing equipment meets the testing
needs of ASTM D1598 and D1599. We can also design and manufacture similar equipment to meet most any application.
Pressure / Pipe Test Systems
The Series 540 Sealant Tester is designed to perform reliable cyclic testing of sealants, adhesives, and coating to various specifications. • Optional heat/cool chamber with control system • PC with Windows ™ based software.
top related