ufo compact signal processing system ufo -...
Post on 15-Feb-2019
333 Views
Preview:
TRANSCRIPT
UFOUFO®compact -Signal processing system
General information 3Module carriers 4-5Front cover, Amplifi er set 6Control unit, Input splitter 7Twin Sat-TV channel unit 8Sat-TV channel unit 9DVB transcoder QPSK-PAL 10Twin DVB transcoder QPSK-PAL 11-12Common Interface retrofi t sets, CA module 13Twin DVB transcoder QPSK-FM 14DVB-S(2)-QAM transmodulator 15Twin DVB-S(2)-QAM transmodulator 16DVB-S(2) transmodulator/multiplexer 17Transmodulator DVB-S(2)-COFDM 18Twin DVB-T transcoder COFDM-PAL 19Twin DVB-T transmodulator COFDM-QAM 20TV converters 21/23DVB-T/TV converters 22FM range amplifi er 24Twin FM converter 25Twin FM modulator 26Twin TV modulator 27TV modulator 28Data bus de-multiplexer 29Software 3019” support frame 31Accessories for the 19” frame 31-3219” module rack 32System example 33Technical appendix 34-35
1. C/N on output UAS 484/EAS 484
2. S/N on output of PAL modules
3. Output coupling
4. Headend system data
Catalogue and special brochures 36
Contents
2
UFO®compact signal processing system
3
General information
UFO®compact signal processing system
UFO®compact components:
Module carriers for 4 modules for wall-mounting
Module carriers for 12 modulesfor installation in 19” cabinets or for wall mounting
Control units to programme the modules
Analogue Sat-TV channel modules
DVB transcoders
DVB transmodulators
Analogue TV and DVB-T converters
FM range amplifi er andFM converters
With the UFO®compact signal processing system, Kathrein offers an economical and technically well-proven headend to process analogue and digital radio and TV programmes.
Installation of the headend is extremely simple.
The various module carriers available are dimensioned to enhold either four or twelve signal processing modules and are completely pre-mounted and cabled.
UFO®compact fulfi lls the requirements of the standards EN 50083 and EN 60065 and is CE and Class A certifi ed.
The control unit is simply connected to the processing module to be tuned using the attached connection cable.
The processing modules only have to be inserted, connected and fi nally programmed as required.
The UFO®compact system can be quickly set up and pre-programmed by the antenna specialist before delivery to the installation site. All standard tuning parameters can be set using the control unit (available separately).The power supply unit inte-grated in the module carriers provides all necessary supply voltages.
Power supply to the individual modules is undertaken using fl exible power supply leads.
LNB powering is carried out using a remote feed diplexer (please order separately).
TV modulators
FM modulators
Data bus de-multiplexer
Common Interface (CI) retrofi t sets
4-way input splitter
Software
19” installation accessories
Accessories for on-wall installation in free-access areas
4
UFO®compact signal processing system
Features
Completely pre-assembled, with power supply unit, output coupler and cabling (when used in satellite reception systems, LNB remote feeding and input distribution must be disassociated)
Galvanised sheet steel housing, with a detachable, lockable front cover of coated aluminium
For indoor installationDimensions (W X H x D) in mm: 310 x 325 x 260
Packing unit/weight (pc./kg): 1/5.6
UFG 404 20610089
Module carrier with 4 insert positions
Module carriers
Note:
Some new channel units (e.g. UFO 372/TP) have a higher current drain. Please observe the maximum permissible load of the power supply unit.
Features
Designed for installation in 19“ cabinets (e.g. the Kathrein TUG 100) and for wall-mounting (front cover UFZ 412/D can be ordered separately, if required)
Completely pre-assembled, with power supply, extractor fans, output couplers, input splitters and cabling (if required, amplifi er set UFZ 412/V with WFS 27 remote feed diplexer and post-amplifi er 1681330 can be ordered separately)
Suffi cient heat dissipation is ensured using two extractor fans, allowing installation also in non-acclimatised rooms or in fully occupied 19“ cabinets
Designed to also allow integration of the data bus de-multiplexer UFX 314
Module carrier of galvanised steel
Unit of height: 9 UH
For indoor installation
Dimensions (W X H x D) in mm: 483 x 408 x 350 (19” installation depth: 265)
Packing unit/weight (pc./kg): 1/12.5
Module carrier with 12 insert positions
UFG 412 20610090
5
UFO®compact signal processing system
1) For wall mounting, the UFZ 412/D front cover (20610098) and the amplifi er set UFZ 412/V (20610099) are additionally available
²) Extendable with UFZ 300
3) The operational output level of the UFO 394 is lower by 4 dB
Module carrier Type UFG 404 UFG 412
Order no. 20610089 20610090
Type of mounting Wall mounting Insertion in 19” cabinets and wall mounting ¹)
Insert positions for single or twin modules 4 12
Input data
Input frequency range MHz 87.5-862/950-2,150 87.5-862/950-2,150
Input splitter terr./Sat - 3 x 4-way ²)
Connection loss (per 4-way splitter) Terr./Sat dB - 16
Through loss (per 4-way splitter)
Terr.Sat dB - 2.5
3.5
Remote feeding for LNB supply V/mA - 18/max. 600
Output data
Output frequency range MHz 5-862 5-862
Output coupler 1 x 4-way 3 x 4-way on 1 x 3-way
Tap loss dB Typ. 7.5 Typ. 14
Operational output level
PAL 3)
64 QAM256 QAM
FM
dBµV
87 77 83 83
81 71 77 77
Power supply unit
Mains voltage V/Hz 207-253/50-60 207-253/47-63
Max. power consumption W < 70 250
Secondary voltage/max. permissible current A5 V/3.2
12.5 V/2.6 31 V/0.03
5 V/14.5 12.5 V/10.0
18 V/0.6 31 V/0.11
Overload signalling (red LED)(max. permissible secondary power) W - 212
General
Fan - 2
Max. power consumption fan W - 2 x 13
Ambient temperature range °C -20 to +55 -20 to +50
Technical data
Module carriers
6
Features
Front cover fi ts UFO®compact base unit UFG 412
Made of galvanised and coated sheet steel
Detachable and sealable
Only required if the base unit is to be protected against unauthorised access
UFO®compact signal processing system
Front cover
UFZ 412/D 20610098
Features
Amplifi er set suitable for UFO®compact base unit UFG 412
Comprises:UFO®compact post-amplifi er 1681330- Gain: 24 dB- Max. output level: 100 dBµVWFS 27 remote-feed diplexerRF connection cables (2 units)
Amplifi er set
UFZ 412/V 20610099
Dimensions (W X H X D) in mm with UFG 412: 505 x 435 x 360
Packing unit/weight (pc./kg): 1/3.0
Packing unit/weight (pc./kg): 1/0.35
7
UFO®compact signal processing system
Features
LCD, 4 lines and 20 characters per line for display of settings and operating parameters
12 ergonomically arranged function buttons with indelible printing for entering the channel unit parameters
Direct input of alphanumerical characters is possible
Spiral cable, 1.4 m long, non-kinking, 6-pin mini DIN plug for connection to modules
USB interface for software update via PC
Language change-over German/English/French/Spanish
Power supply (5 V/100 mA) to control unit is undertaken by modules
Protection category:IP 50 according to EN 60529
Ambient temperature range: +5 to 50 °C
Dimensions (W X H X D) in mm without cable: 220 x 75 x 25
Packing unit/weight (pc./kg): 1/0.6
UFG 300 20610082
Intelligent manual control unit to program the standard setting parameters of the UFO®compact modules.
Control unit
Features
To extend the number of inputs per polarisation or to refi t a system with an additional Sat level
One input, four outputs and a loop-through output to connect another UFZ 300 or an already existing input splitter
In combination with input splitters that are already integrated, it enables any H/V splitting
Easy to refi t
Frequency range: 47-2,150 MHz
Distribution loss: 16 dB
Splitting loss terr./Sat: 2.5/3.5 dB
Dimensions (W x H x D) in mm without cable: 154 x 63 x 40
Packing unit/weight (pc./kg): 1/0.3
Input splitter, 4-way
UFZ 300 20610070
8
UFO®compact signal processing system
Features
To receive two satellite programmes in PAL with analogue audio subcarriers
Two channel units are integrated in one module
Optionally one or two input(s) (settable via the central control unit)
The two output channels are fi xed adjacent channels
All essential transmission parameters can be set via the central control unit
One channel unit (channel unit A) can be connected to an external decoder
Output levels can be commonly set and individually switched off via the central control unit
Adjacent channel compatible
Stereo TV sound. Integrated data line decoder for automatic recog-nition of and switching to mono, stereo or 2-tone programmes
Black screen video signal to transmit a radio programme on a TV channel (satellite signal required for black screen signal generation)
TV standards B/G, D/K or I settable via the central controller
C band compatible (settable via the central control unit)
Required central control unit software version: at least V 8.01
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.8
Twin Sat-TV channel unit
UFO 340 20610007
Technical data
Type Order no.
Frequency range (MHz)
Input level ¹)
FM threshold
(static)
Signal-to-noise ratio ³)
S/N weighted
Audio subcarrier frequency
Audio-IF bandwidth main/sub
Video/audio carrier level
spacing T1/T2
Max. output level ²)/
setting range
De-coder inter-face
Currentdrain
Input 920-2,150
Output 110-862 (dBµV) (dB) (dB) (MHz) (kHz) (dB) (dBµV) (V/mA)
UFO 340 20610007 48-80 7 56 5.5-9 280/110 15/20 95/85-95 1 x
5/1,000 12.5/460
31/9
¹) On input channel unit; observe input splitting loss
²) In acc. with EN 50083-5, 54 dB IM (equivalent to DIN 45004 K)
³) Channel unit‘s intrinsic value
Ch ChCh Ch
9
Features
Converts a satellite TV programme with analogue audio subcarrier into an analogue PAL-TV programme (B/G, D/K or I standard)
Designed for larger networks with increased system requirements
The whole channel unit is integrated in one module
One module is required per programme
Two inputs A/B, settable via the central control unit (e.g. for H/V switching)
All essential transmission parameters can be set via the central control unit
Audio/video interface (15-pin SubMin-D socket)
Stereo TV modulator, adjacent channel compatible
Built-in data line decoder for automatic recognition of and switching in mono, stereo or 2-tone programmes
Black screen video signal to transmit a radio programme on a TV channel (satellite signal required for black screen signal generation)
C-band compatible (settable via the central control unit)
Required central control unit software version: at least V 8.00
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight: 1/0.7 kg
UFO 341 20610054
¹) Channel unit‘s intrinsic value at 25/16 MHz deviation, > 60 dBµV input level
UFO®compact signal processing system
Sat-TV channel unit
Technical data
Type Order no.
Frequency range (MHz)
Input level
FM threshold
(static)
Signal-to-noise ratio ¹)
S/N weighted
Audio sub-
carrier frequency
Audio-IF band-width
main/sub
Max. output level/setting
range
Video/audio carrier level
spacing T1/T2
Currentdrain
Input 920-2,150
Output 47-68/110-862 (dBµV) (dB) (dB) (MHz) (kHz) (dBµV) (dB) (V/mA)
UFO 341 20610054 47-80 7 58/57 5.5-9 280/110 95/85-95 16/20
5/540 12.5/340
31/9Ch Ch
10
UFO®compact signal processing system
Features
DVB-Sat channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
Transcodes a TV or radio programme from a QPSK-modulated Sat-transponder into an analogue PAL-TV channel
TV standards: B/G, D/K or I
Specifi cally for larger system with increased system requirements
Two inputs A/B, settable via the central control unit (e.g. for H/V switching)
All essential transmission parameters can be set via the central control unit
TV or radio programmes from the received transponder can directly be chosen due to text shown on the control unit´s display
Up to 10 TV programmes/trans-ponder and 32 accompanying sounds/TV programme or 255 radio programmes can be processed
Wide-screen signalling (WWS) so that broadcasts transmitted in 16:9 format are correctly displayed on wide-screen TV sets
Automatic format recognition (4:3 or 16:9). In 16:9 reception, optional Letterbox or Pan & Scan conversion
The output level can be set and switched off via the control unit
Digital satellite reception over the wide symbol rate range of 2-45 MS/s (SCPC and MCPC)
Switchable audio/video port (15-pin SubMin-D socket)
Adjacent channel compatible
Videotext and VPS insertion
Audio modes: mono, stereo, dual-/2-tone, dual-A, dual-B (if two different audio signals are transmitted on one audio-PID)
DVB and teletext subtitling (a control unit with a software version of at least V 9.20 is required)
Teletext deactivation and LED display suppression (separate activation)
Black screen video signal generation for radio on a TV channel, e.g. in hotels (satellite signal is required for black screen generation)
Software updates via control unit´s interface
Radio text to show the station name or a user-defi ned text
Can be extended with the UFZ 383 Common Interface retrofi t set to add a new CA module
Readout and operation of the CAM menu and selection of the subtitle languages via the OSD of a test TV set
Required central control unit software version: at least V 9.10 (for USW 30: at least V 3.10)
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.7
UFO 391 20610072
DVB transcoder QPSK-PAL
Technical data
Type Order no.
Frequency range (MHz) Input level Input
data rate
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting
range
Video/audio carrier level
spacing T1/T2
Currentdrain
Input 950-2,150 ¹)
Output 47-68/110-862 ²) (dBµV) (MS/s) (dB) (dBµV) (dB) (V/mA)
UFO 391 20610072 48-85 2-45 61 95/85-95 16/20
5/340 12.5/480
31/9ChCh
¹) Settable in 1 MHz steps and fi ne tuning via AFC²) Settable in the 7/8 MHz channel grid, fi ne tuning in the 250 kHz raster³) Channel unit‘s intrinsic value (58 dB with 48 channel units)
11
UFO®compact signal processing system
Features
DVB-Sat channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx Transcodes two TV or radio programmes of any transponder into two analogue PAL TV programmes (2 separate frontends)
TV standards: B/G, D/K or I
Two inputs A/B, settable via the central control unit (e.g. for H/V changeover)
All essential transmission parameters can be set via the central control unit
Direct selection of the TV or radio programmes of the received transponder by means of text displayed on the control unit
Automatic format recognition (4:3 or 16:9). In case of 16:9 reception optional Letterbox or Pan & Scan conversion
Wide-screen signalling (WSS) so that broadcasts transmitted in 16:9 format are correctly displayed on wide-screen TV sets (a control unit with software version V 9.10 is required)
The two output channels are fi xed adjacent channels
The levels of the two output channels can be commonly set and individually switched off via the control unit
Digital satellite reception over the wide symbol rate range of 2-45 MS/s (SCPC and MCPC)
Adjacent channel compatible
Videotext and VPS insertion
Audio modes: mono, stereo, dual/2-tone, dual-A, dual-B (if two different audio signals are transmitted in one audio-PID) Radio text to show the station name or a user-defi ned text (a control unit with software version V 9.10 is required)
DVB and teletext subtitling (for this, a control unit with software version V 9.20 or higher is required)
Teletext deactivation and LED display suppression (separate activation; a control unit with software version V 9.10 is required)
Black screen video signal generation to insert a radio programme into a TV channel, e.g. in hotels (possible on both channels; DVB-T signal is required to generate black screen video signal)
Software updates via control unit´s interface
Required central controller software version: at least V 8.80
Dimensions (W x H x D) in mm: 265 x 27 x 170
Ambient temperature range for operation in:- module carrier with extraction fan (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C
Packing unit/weight (pc./kg): 1/0.7
UFO 393 20610074
Twin DVB transcoder QPSK-PAL
DVB-SFrontend
DVB-SFrontend
FPGA
TwinMPEG 2 /PAL
ZF-Mod
ZF-Mod
ZF
HF
A
B
Technical data
Type Order no.
Frequency range(MHz) Input level Input
data rate
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting
range
Video/audio carrier level
spacing T1/T2
Current drain
Input 950-2,150 ¹)
Output 110-862 ²) (dBµV) (MS/s) (dB) (dBµV) (dB) (V/mA)
UFO 393 20610074 55-85 2-45 60 95/85-95 16/20
5/625 12.5/600
31/3ChChChCh
¹) Settable in 1 MHz steps, fi ne tuning via AFC²) Settable in the 7/8 MHz channel grid, fi ne tuning in the 50 kHz raster³) Channel unit‘s intrinsic value
12
UFO®compact signal processing system
Features
DVB-S channel unit for for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
Transcodes two TV or radio program-mes from one transponder into two analogue PAL-TV programmes
TV standards: B/G, D/K or I
Two inputs A/B, settable via the cen-tral control unit (e.g. for H/V switching)
DiSEqCTM1.0 for control of external multi-switches
All essential transmission parameters can be set via the central control unit
Direct selection of TV or radio pro-grammes of the received transponder as their names are displayed on the control unit
Automatic format recognition (4:3 or 16:9). In 16:9 reception optionally Letterbox or Pan & Scan conversion
Wide-screen signalling (WSS) so that broadcasts transmitted in 16:9 format are correctly displayed on widescreen TV sets
The two output channels are individually settable
The levels of the two output channels can be commonly set and individually switched off via the control unit
Adjacent channel compatible
Videotext and VPS insertion
Digital satellite reception over the wide symbol rate range of 2-45 MS/s (SCPC and MCPC)
Switchable audio/video interface (15-pin SubMin-D socket) in channel unit twin-A
DVB and teletext subtitling
Teletext deactivation and LED display suppression (separate activation)
Audio modes: mono, stereo, dual/2-tone, dual-A, dual-B (if two different audio signals are transmitted in one audio-PID)
Black screen video signal generation to insert a radio programme into a TV channel, e.g. in hotels (possible on both channels; satellite signal is required for black screen generation)
Radio text to show the station name or a user-defi ned text
Software updates via control unit interface
Extendable with the UFZ 394 Common Interface retrofi t set to add two CA modules
Readout and operation of the CAM menu and selection of the subtitle languages via the OSD of a test TV set
Required central control unit software version: at least V 9.30, for USW 30 software: at least 3.3
Dimensions (W x H x D) in mm: 265 x 27 x 170
Ambient temperature range for operation in:- module carrier with extraction fans (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 °C
Packing unit/weight (pc./kg): 1/1.0
Twin DVB transcoder QPSK-PAL
UFO 394 20610096
DVB-SFrontend
FPGA
TwinMPEG 2 /PAL
ZF
HF
ZF
HF
ZF-Mod
ZF-Mod
CI(UFZ 394)
Technical data
Type Order no. Frequency range (MHz) Input level Input data rate
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting
range
Video/audio carrier level
spacing T1/T2
Current drain
Input 950-2,150 ¹)
Output 47-100/
110-862 ²)(dBµV) (MS/s) (dB) (dBµV) (dB) (V/mA)
UFO 394 20610096 48-85 2-45 60 91/81-91 16/20
5/70012.5/600
31/9
¹) Settable in 1 MHz steps and fi ne tuning through AFC²) Settable in the 7/8 MHz channel raster, fi ne tuning in the 50 kHz raster³) Channel unit‘s intrinsic value (57.5 dB with 48 channel units)
Ch ChCh
13
Software update via satellite
UFO®compact signal processing system
Features
Common Interface (CI) retrofi t set, for insertion of a CA module
Suitable for the UFO 382 and UFO 391 DVB-S transcoders and the UFO 353 DVB-T transcoder
Common Interface (CI) retrofi t set
UFZ 383 20610006
Re-fi tting can easily be carried out by the specialised dealer
Packing unit/weight (pc./kg): 1/0.1
Features
Common Interface (CI) retrofi t set, for insertion of two CA modules
To retrofi t suitable UFO®compact processing units (see unit descriptions to check compatibility)
Re-fi tting can easily be carried out by the specialist dealer
Power input e.g. via 2 x AlphaCrypt CA modules: 12.5 V/160 mA, 5 V/70 mA
Packing unit/weight (pc./kg): 1/0.25
Common Interface (CI) retrofi t set
UFZ 394 20610097
Features
For DVB-S and DVB-C receivers
For UFOcompact processing units with a CI retrofi t-kit
Integrated juvenile protection function
CA module AlphaCrypt Light
UFZ 100 20410028
CAM
SC
CAM
SC
CI-Board
14
UFO®compact signal processing system
Features
DVB radio channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
Transcodes two DVB-S radio programmes from one transponder into two standard FM stereo radio programmes
The whole channel unit is integrated in one module
One module is required for two channels
Two inputs A/B, settable via the central control unit(i.e. for H/V switching)
The two output channels can be set individually
All essential transmission parameters can be set via the central control unit
The levels of the two output channels can be set and switched off via the control unit
RDS function for station name display in RDS suitable FM receivers (standard-conforming extraction from data stream or manual entry)
Software updates via control unit´s interface
Required central control unit software: at least V 8.00
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.7
Twin DVB transcoder QPSK-FM
UFO 312 20610052
¹) Channel unit‘s intrinsic value
Technical data
Type Order no.
Frequency range (MHz)
Input level
Input data rate
Sum distortion
attenuation
Disturbing voltage ratio ¹)
Crosstalk attenuation
Max. output level/setting
range
Current drain
Input 950-2,150
Output 87.5-108 (dBµV) (MS/s) (dB) (dB) (dB) (dBµV) (V/mA)
UFO 312 20610052 50-80 1-45 60 62 44 95/80-95
5/500 12.5/500
31/6Ch Ch Ch
15
UFO®compact signal processing system
Features
DVB-S/HDTV channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To process the signals of a DVB-S transponder or a HDTV transponder in CATV systems
Transmodulates a QPSK modulated DVB-S signal or 8PSK modulated DVB-S(2) signal into a QAM modulated output signal
The whole channel unit is integrated in one module
Two inputs A/B, settable via the central control unit (e.g. for H/V switching and to create the cable-NIT for two polarisations)
DiSEqCTM1.0 to control external multi-switches
All essential transmission parameters can be set via the central control unit
The output level can be set and switched off via the control unit
Adjacent channel compatible
Software updates via control unit interface
MPEG transport stream processor:
To set a constant output data rate (Stuffi ng) with PCR correctionWith programme fi lter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x)For NIT matching (cable NIT; additionally UFX 31x is required)For CAT matching, e.g. to set the operator-ID
QAM modulator for 16/32/64/128/256 QAM (factory setting: 64 QAM)
MPEG transport stream processor and QAM modulator as an FPGA solution with outstanding MER and shoulder attenuation values Extendable with UFZ 394 Common Interface retrofi t set to add two CA modules
Required central control unit software version: at least V 9.30
Ambient temperature range for operation in:- module carrier with extraction fans (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 °C
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.7
DVB-S(2)-QAM transmodulator
UFO 371/TP 20610086
¹) Settable in 1 MHz steps
²) Settable in the 8 MHz raster, fi ne tuning in the 250 kHz raster
³) Settable (Stuffi ng)
Technical data
Type Order no. Frequency range (MHz) Input
levelInput
data rateOutput
data rate ³)
Modulation Error Rate
MER
Max. output level
Output level setting range
Current drain
Input 950-2,150 ¹)
Output 47-100/
110-862 ²)(dBµV) (MS/s) (MS/s) (dB) (dBµV) (dBµV) (V/mA)
UFO 371/TP 20610086 55-85 2-45 (DVB-S)
2-30 (DVB-S2) 2.275-7.15 43 91 (QAM 256)85 (QAM 64)
81-91 (QAM 256)75-85 (QAM 64)
5/500 12.5/750
31/7ChCh
16
UFO®compact signal processing system
Features
Twin DVB-S/HDTV channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To process the signals of two DVB-S transponders or two HDTV transponders in CATV systems
Transcodes two QPSK modulated DVB-S signals or two 8PSK modulated DVB-S(2) signals into two QAM modulated output signals
The whole channel unit is inserted in one module
Two inputs A/B, settable via the central control unit (e.g. for H/V switching and to create the cable-NIT for two polarisations)
DiSEqCTM1.0 to control external multi-switches
All essential transmission parameters can be set via the central control unit
The two output channels can be individually set
The two output levels can be commonly set or individually switched off via the control unit
Adjacent channel compatible
Software updates via control unit interface
MPEG transport stream processor:To set a constant output data rate (Stuffi ng) with PCR correctionWith channel fi lter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x)For NIT matching (cable NIT; additionally UFX 31x is required)For CAT matching, e.g. to set the operator ID
QAM modulator for 16/32/64/128/256 QAM (factory setting: 64 QAM)
MPEG transport stream processor and QAM modulator as an FPGA solution with outstanding MER and shoulder attenuation values Ambient temperature range for operation in:- module carrier with extraction fans (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 °C
Required central control unit software version: at least V 9.30
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/1.0
Twin DVB-S(2)-QAM transmodulator
UFO 372/TP 20610084
¹) Settable in 1 MHz steps²) Settable in the 8 MHz raster, fi ne tuning in the 250 kHz raster³) Settable (Stuffi ng)
DVB-S(2)Frontend
DVB-S(2)Frontend
FPGA
TwinMPEG 2 /QAM
ZF-Mod
ZF-Mod
ZF
HF
ZF
HF
A
B
Technical data
Type Order no. Frequency range (MHz) Input
levelInput
data rateOutput
data rate ³)
Modulation Error Rate
MER
Max. output level
Output level setting range
Current drain
Input 950-2,150 ¹)
Output 47-100/
110-862 ²)(dBµV) (MS/s) (MS/s) (dB) (dBµV) (dBµV) (V/mA)
UFO 372/TP 20610084 55-85 2-45 2.275-7.15 43 91 (QAM 256)
85 (QAM 64)81-91 (QAM 256)75-85 (QAM 64)
5/1,20012.5/760
31/7ChChChCh
17
Features
DVB-S/HDTV channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To process signals from two DVB-Sat (or HDTV) transponders into a QAM modulated output signal
Enables selection of individual programmes from two QPSK modulated DVB-S signals (or 8PSK modulated DVB-S(2) signals), multiplexing of both transport streams and transmodulation of these into a QAM modulated output channel
The whole channel unit is integrated in one module
Two inputs A/B, settable via the central controller (e.g. for H/V switching and to create the cable-NIT for two polarisations)
DiSEqCTM1.0 to control external multi-switches
All essential transmission parameters can be set via the central control unit
The output level can be set and switched off via the controller
Adjacent channel compatible
Software updates via control unit interface
MPEG transport stream processor:
To set a constant output data rate (Stuffi ng) with PCR correctionWith programme fi lter to remove individual TV and radio channels (easy setting using the USW 30 and UFX 31x)For NIT conversion (cable NIT; UFX 31x is additionally required)For CAT conversion (insertion of an operator ID)
Origin of EPG data can be switched between input A and input B (as of software version V 04)
QAM modulator for 16/32/64/128/256 QAM (factory setting: 64 QAM)
MPEG transport stream processor and QAM modulator based on a FPGA design with outstanding MER and shoulder attenuation values
Extendable with UFZ 394 Common Interface retrofi t set for insertion of two CA modules (input A; as of software version V 02)
Ambient temperature range for operation in:- module carrier with extraction fans (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 °C
Required central controller software version: at least V 9.30 (CI functionality as of V 9.31)
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/1.0
UFO®compact signal processing system
DVB-S(2) transmodulator/multiplexer
UFO 373/MX 20610087
DVB-S(2)Frontend FPGA
MUXMPEG 2 /QAM
ZF-Mod
ZF
HF
CI(UFZ 394)
A
BDVB-S(2)Frontend
Technical data
Type Order no.
Frequency range(MHz) Input level Input
data rateOutput
data rate ³)
Modulation Error Rate
MER
Max. output level
Output level setting range
Currentdrain
Input 950-2,150 ¹)
Output 47-100/
110-862 ²)(dBµV) (MS/s) (MS/s) (dB) (dBµV) (dBµV) (V/mA)
UFO 373/MX 20610087 55-85 2-45 2.275-7.15 43
91 (QAM 256)
85 (QAM 64)
81-91 (QAM 256)
75-85 (QAM 64)
5/1,20012.5/700
31/7Ch ChCh
¹) Tuning in 1 MHz increments²) Tuning in an 8 MHz raster, fi ne tuning in 250 kHz increments³) Settable in the operational mode “Stuffi ng“
18
UFO®compact signal processing system
Features
DVB-S/HDTV channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx To process the signals of a DVB-S transponder or a HDTV transponder in community antenna systems
Transmodulates a QPSK modulated DVB-S signal or 8PSK modulated DVB-S2 signal into a COFDM modulated output signal (programme fi ltering required for adjustment to the max. output data rate)
The whole channel unit is integrated in one module Two inputs A/B, adjustable via central control unit (e.g. for H/V switching)
DiSEqCTM1.0 to control external multi-switches
All essential transmission parameters can be set via the central control unit The output level can be set and switched off via the control unit
Adjacent channel compatible
MPEG transport stream processor: To set a constant output data rate (stuffi ng) with PCR correction With programme fi lter to remove individual TV and radio programmes (easy setting using the USW 30 and UFX 31x)For NIT matching (Cable NIT; UFX 31x additionally required)For CAT matching, e.g. to set the operator ID
COFDM modulator for modulation type 2k, mapping QPSK, 16 QAM, 64 QAM
MPEG transport stream processor and COFDM as an FPGA solution
Software updates via control unit interface
Extendable with UFZ 394 Common Interface retrofi t set to add two CA modules
Required central control unit software version: at least V 9.32
Ambient temperature range for operation in:- module carrier with extraction fans (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fans (UFG 3xx): -20 to +40 °C
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.85
Temporary data; subject to change
Transmodulator DVB-S(2)-COFDM
UFO 331/TP 20610100
Technical data
TypeOrder no. Frequency range (MHz) Input level Input data
rateCOFDM modes
Modulation Error Rate
MER
Max. output level
Setting range output level
Current drain
Input 950-2,150 ¹)
Output 47-100/
110-862 ²)(dBµV) (MS/s) (dB) (dBµV) (dBµV) (V/mA)
UFO 331/TP 20610100 55-85
2-45 (DVB-S)
2-30 (DVB-S2)
QPSK16 QAM64 QAM
33.5 (< 400 MHz)
32 (> 400 MHz)
91 81-915/500
12.5/75031/7
¹) Settable in 1 MHz steps
²) Settable in 6/7/8 MHz raster, fi ne tuning in the 250 kHz raster
K K
19
UFO®compact signal processing system
Features
DVB-T channel unit for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
Transcodes two TV or radio programmes from a COFDM modulated DVB-T channel into two analogue PAL TV programmes
TV standards: B/G, D/K or I
All essential transmission parameters can be set via the central controller
Direct selection of TV or radio programmes from the received DVB-T channel due to text shown on the controller display
Automatic format recognition (4:3 or 16:9). In 16:9 reception choice of either Letterbox or Pan & Scan conversion
Wide-screen signalling (WSS) so that broadcasts transmitted in 16:9 format are correctly displayed on wide-screen TV sets
Both output channels can be set individually
Both output levels can be individually set or switched off via the control unit
Switchable audio/video interface (15-pin SubMin D socket) in thetwin-A channel unit
Adjacent channel compatible
Videotext and VPS insertion
Audio modes: mono, stereo, dual/2-tone (if two different audio signals are transmitted on one audio-PID)
DVB and teletext subtitling
Teletext deactivation and LED display suppression (separate activation) Black screen generation for radio on a TV channel, e.g. in hotels (possible in both channels; DVB-T signal is re-quired for black screen generation)
Radio text to show the broadcaster name or a user-defi ned text
Software updates via control unit´s interface
Can be extended with Common Interface retrofi t set UFZ 394 to accommodate two CA modules
Read-out and operation of CAM menu using the OSD of a test TV set
Required central control unit software version: as of V 9.31
Dimensions (W x H x D) in mm: 265 x 27 x 170
Permissible ambient temperature for operation in:- module carrier with extraction fan (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C
Packing unit/weight (pc./kg): 1/0.7
Twin DVB-T transcoder COFDM-PAL
UFO 364 20610075
DVB-TFrontend
TwinMPEG 2 /PAL
ZF
HF
ZF
HF
ZF-Mod
ZF-Mod
CI(UFZ 394)
Technical data
Type Order no. Frequency range (MHz) Input
level
Signal-to-noise ratio ³)
S/N weighted
Max. output level
Output level setting range
Video/audio carrier level
spacing T1/T2
Current drain
Input 47-862 ¹)
Output 47-100/110-862 ²) (dBµV) (dB) (dBµV) (dBµV) (dB) (V/mA)
UFO 364 20610075 40-90 60 91 81-91 16/20
5/700 12.5/600
31/9ChChCh
¹) Settable in the 6/7/8 MHz channel plan, fi ne tuning in 100 kHz steps²) Settable in the 7/8 MHz channel plan, fi ne tuning in 50 kHz steps³) Channel unit‘s intrinsic value
20
UFO®compact signal processing system
Features
Twin DVB-T transmodulator for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
Transmodulates two COFDM modulated DVB-T signals into two QAM modulated output signals
Two channel units are integrated in one module
Two inputs (input A for channel unit twin I, input B for channel unit twin II)
All essential transmission parameters can be set via the central control unit
Both output channels can be set individually
Both output levels can be individually set or switched off via the control unit
Adjacent channel compatible
MPEG transport stream processor and QAM modulator as an FPGA solution with with outstanding MER and shoulder attenuation values
MPEG-Transportstrom-Prozessor und QAM-Modulator als FPGA-Lösung mit herausragenden Werten für MER und Schulterdämpfung
MPEG 2 transport stream processor:
To set a constant output data rate (Stuffi ng) with PCR correctionWith programme fi lter to remove individual TV and radio programmes (more convenient setting using the USW 30 and UFX 31x)For NIT matching (Cable NIT; UFX 31x additionally required)For CAT matching, e.g. to set the operator ID
QAM modulator for 16/32/64/128/256 QAM (factory setting: 64 QAM)
Software updates via control unit interface
Permissible ambient temperature for operation in:
- module carrier with extraction fan (UFG 412): -20 to +50 °C- (extension) module carrier without extraction fan (UFG 3xx): -20 to +40 °C
Required central controller software version: as of V 9.31
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/1.0
Twin DVB-T transmodulator COFDM-QAM
UFO 357/TP 20610085
DVB-TFrontend
DVB-TFrontend
FPGA
TwinMPEG 2 /QAM
ZF-Mod
ZF-Mod
ZF
HF
ZF
HF
A
B
Technical data
¹) For channel unit twin I and twin II, frequency range input independently settable in 6/7/8 MHz steps, fi ne-tuning in 100 kHz steps
²) Settable in 8 MHz steps; fi ne tuning in 250 kHz steps
³) Settable (Stuffi ng)
Type Order no. Frequency range (MHz) Input level COFDM
modesOutput data
rate ³)
Modulation Error Rate
MER
Max. output level
Setting range output level
Current drain
Input 47-862 ¹)
Output 47-100/110-862 ²) (dBµV) (MS/s) (dB) (dBµV) (dBµV) (V/mA)
UFO 357/TP 20610085
45-90 (16 QAM)
55-90 (64 QAM)
2 k, 8 k 2.275-7.15 43
91 (QAM 256)
85 (QAM 64)
81-91 (QAM 256)
75-85 (QAM 64)
5/28012.5/750
31/7ChCh ChCh
21
UFO®compact signal processing system
Features
TV converters for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To convert terrestrial TV programmes (B/G standard)
Input and output channel can be set via the central control unit
High degree of selection due to conversion via IF
Any combination other than co-channel combination is possible
Adjacent channel compatible
AGC for automatic input level control
Required central control unit software version: at least V 6.40
Dimensions (W x H x D) in mm: 265 x 27 x 120
Packing unit/weight (pc./kg): 1/0.5
TV converters
UFO 320UFO 321
260500260501
¹) To EN 50083-5/point 3.1, 54 dB IMod (DIN 45004 K)
²) At maximum gain
³) With input level > 80 dBµV
Technical data
Type Order no.
Frequency range (MHz) Input level
Signal-to-noise ratio ³) S/N weighted
Max. output level/setting range ¹)
Noise figure ²)
Currentdrain
Input 174-230
Input 470-862
Output 118-342 (dBµV) (dB) (dBµV) (dB) (V/mA)
UFO 320 260500 55-85 52 95/85-95 8
5/320 12.5/110
31/5
UFO 321 260501 55-85 55 95/85-95 8
5/320 12.5/110
31/5
Ch
Ch
Ch
Ch
22
UFO®compact signal processing system
Features
TV converters for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To convert terrestrial DVB-T and analogue PAL programmes (B/G, D/K or I standard)
Input channel and output channel can be set via the central control unit
High degree of selection due to conversion via IF
Any channel combination possible (also co-channel conversion)
Suitable as channel amplifi er for DAB (co-channel conversion Ch12-Ch12)
Adjacent channel compatible
AGC for automatic input level control
Required central control unit software version: at least V 7.20
Dimensions (W x H x D) in mm: 265 x 27 x 120
Packing unit/weight (pc./kg): 1/0.5
DVB-T TV converters
UFO 351UFO 352
2061004920610055
¹) At maximum gain
²) For PAL at input level > 80 dBµV
Note on UFO 352:
When DVB-T signals are converted from UHF to VHF, the 8 MHz bandwidth is retained.
Technical data
Type Order no.
Frequency range (MHz)
Frequency range Input level
Signal-to-noise ratio ²)
S/N weighted
Setting range output level
Noise figure ¹)
Currentdrain
Input 174-230/470-862
Output 118-342
Output 470-862 (dBµV) (dB) (dBµV) (dB) (V/mA)
UFO 351 20610049
55-85 (PAL) 35-85 (DVB-T) 52 85-95 (PAL)
75-85 (DVB-T) 75/500
12.5/180 31/8
UFO 352 20610055
55-85 (PAL) 35-85 (DVB-T) 52 85-95 (PAL)
75-85 (DVB-T) 75/500
12.5/180 31/8
Ch
Ch Ch
Ch
23
UFO®compact signal processing system
Features
TV converters for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To convert terrestrial TV programmes (standard: D/K)
Input and output channel can be set via the central control unit
High degree of selection due to conversion via IF
Any channel combination possible (also co-channel conversion)
Adjacent channel compatible
AGC for automatic input level control
Required central control unit software version: at least V 8.70
Dimensions (W x H x D) in mm: 265 x 27 x 120
Packing unit/weight (pc./kg): 1/0.4
TV converters
UFO 352/DEUFO 352/DA
2061007820610079
¹) At maximum gain
²) For input level > 80 dBµV
Technical data
TypeOrder no.
Frequency range (MHz)
Inputlevel
Signal-to-noiseratio ²)
S/N weighted
Setting range output level
Noisefigure ¹)
Currentdrain
Input 48.5-100
Input 174-230/470-862
Output 48.5-100
Output 118-342 (dBµV) (dB) (dBµV) (dB) (V/mA)
UFO 352/DE 20610078 55-85 52 85-95 7
5/580 12.5/120
31/8
UFO 352/DA 20610079 55-85 52 85-95 7
5/580 12.5/120
31/8Ch
Ch Ch
Ch
24
UFO®compact signal processing system
Features
FM range amplifi er for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
For broadband reception of FM programmes
Four individually adjustable notch fi lters to attenuate interfering signals
Dimensions (W x H x D) in mm: 265 x 27 x 120
Packing unit/weight (pc./kg): 1/0.4
FM range amplifi er
UFO 310 260479
¹) In accordance with EN 50083-5, 66 dB XMod (equivalent to DIN 45004-B)
Technical data
Type Order no.
Frequency range (MHz) Gain Gain setting
rangeDepth per wave trap Max. output level ¹) Noise figure Current
drain
87.5-108 (dB) (dB) (dB) (dBµV) (dB) (V/mA)
UFO 310 260479 36 18-36 > 18 110 < 5 12.5/200
25
UFO®compact signal processing system
Features
Twin FM converter for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To selectively convert two FM programmes
Twin module with one input and one output
Input and output frequencies can be set via the central control unit
Output level can be set and switched off via the control unit
Frequency grid: input: 50 kHz; output: 50 kHz
Min. channel spacing on the output: 300 kHz
High degree of selection due to modulation via IF
Any channel combination possible
Adjacent channel compatible
AGC for automatic input level control
Required central control unit software version: at least V 8.00
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.7
Twin FM converter
UFO 311 20610056
¹) With input level > 60 dBµV
Technical data
Type Order no.
Frequency range (MHz) Input level Sum distortion
attenuationNoise voltage
ratio ¹)Crosstalk
attenuation
Max. output level/setting
range
Currentdrain
Input 87.5-108
Output 87.5-108 (dBµV) (dB) (dB) (dB) (dBµV) (V/mA)
UFO 311 20610056 20-85 > 45 > 58 > 30 95/80-95
5/680 12.5/300
31/8ChCh ChCh
26
UFO®compact signal processing system
Features
Twin FM modulator for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To process audio signals into two standard FM stereo radio programmes
Two modulators integrated in one module
Audio inputs: Cinch sockets
All essential transmission parameters can be set via the central control unit
The two output channels can be set separately
Both output levels can be individually set and switched off via the control unit
Adjacent channel compatible (channel spacing: > 300 kHz)
RDS coder for the station name display in RDS compatible FM receivers (manual entry of the station name on the control unit or simplifi ed entry using USW 30 and UFX 31x)
Required central control unit software version: at least V 8.40
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.7
Twin FM modulator
UFM 313 20610063
¹) Settable in the 50 kHz raster
²) Settable in 4 steps (reference: FM nominal deviation ± 40 kHz w/o pilot and RDS signal)
Technical data
Type Order no.
Frequency range
Frequency range
Input voltage
Crosstalk attenuation
Sum distortion
attenuation
Noise voltage ratio
Disturbing voltage
ratio
Max. output level/setting
range
Current drain
Input(kHz)
0.04-15
Output(MHz)
87.5-108 1)(V) (dB) (dB) (dB) (dB) (dBµV) (V/mA)
UFM 313 20610063 0.5-1.55 2) 40 60 67 71 95/80-95
5/350 12.5/60
31/6
L
L
R
R Ch
Ch
27
UFO®compact signal processing system
Features
Twin FM modulator for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
To process audio/video signals into standard TV signals
Two modulators are integrated in one module
AV inputs: SubMin D socket, 15-pole
The two output channels are fi xed adjacent channels
All essential transmission parameters can be set via the central control unit
Both output levels can be commonly set and individually switched off via the control unit
Adjacent channel compatible
TV sound in stereo, mono or 2-tone; manually or automatically switchable via the data line decoder
Integrated video signal generator (black screen), i.e. to transmit radio programmes on the two TV channels (independent switching between external and internal video signal possible)
TV standard: B/G, D/K or I, settable via the central control unit
Required central control unit software version: at least V 6.80
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.6
Twin TV modulator
UFM 340 20610047
Note:
An adaptor cable SubMin D to Cinch can be ordered from ESC Grassau under order number 09901498.
Technical data
¹) Channel unit‘s intrinsic value
Type Order no.
Frequency range (MHz)
Input voltage audio
Input voltage video
Signal-to-noise
ratio ¹) S/N weighted
Video/audio carrier level
spacing T1/T2
Max. output level/setting
range
Currentdrain
InputAudio
InputVideo
Output110-862 (Veff) (Vss) (dB) (dB) (dBµV) (V/mA)
UFM 340 20610047 1 1 60 18/22 95/85-95
5/560 12.5/250
31/6L
L
R
R VV Ch
Ch
28
UFO®compact signal processing system
Features
TV modulator for insertion into the UFO®compact (extension) module carriers UFG 3xx/4xx
Modulates an audio/video signal into a standard TV signal
Specifi cally designed for larger systems with increased system requirements
AV input: SubMin-D socket, 15-pole
All essential parameters can be set via the central control unit
Output signal level can be set and switched off via the control unit
Adjacent channel compatible
TV sound in stereo, mono or 2-tone; manually or automatically switchable using the data line decoder
TV standards: B/G, D/K or I can be set with the central control unit
Required central control unit software version: at least V 8.40
Dimensions (W x H x D) in mm: 265 x 27 x 170
Packing unit/weight (pc./kg): 1/0.6
TV modulator
UFM 341 20610069
Note:
An adaptor cable SubMin-D to Cinch, order no. 09901498, can be ordered from ESC Grassau.
Technical data
Type Order no.
Frequency range(MHz)
Input voltage audio
Input voltage video
Signal-to-noise ratio ²)
S/N weighted
Video/audio carrier T1/T2 level spacing
Max. output level/setting
range
Currentdrain
Input Audio
Input Video
Output 1)
47-68/110-862 (Veff) (Vss) (dB) (dB) (dBµV) (V/mA)
UFM 341 20610069 1 1 61 16/20 95/85-95
5/390 12.5/220
31/5L R V Ch
¹) Settable in the 7/8 MHz channel plan, fi ne tuning in 250 kHz steps
²) Channel unit‘s intrinsic value
29
Supply voltage: 12.5 V
Current drain: - Approx. 200 mA (without control unit and USB device)
- Max. 900 mA (with control unit and USB device)
Dimensions (W x H x D) in mm without cable: 384 x 23 x 81
Packing unit/weight (pc./kg): 1/0.7
UFO®compact signal processing system
Data bus de-multiplexer
UFX 314 20610071
Features
To centrally control all UFO®compact channel units that are inserted into UFG 412 module carriers
Each UFO®compact module is individually connected to the UFX 314 with a control cable
Required if the USW 30 software is used, for NIT matching (cable-NIT), programme fi ltering, and CAT processing with the UFO 3xx/TP DVB transmodulators
Complete set incl. connection cable to the modules and fi xing material for the UFG 412 module carrier
Can be refi tted on older UFO®compact systems (from UFO 335/365 on; required control unit software version: at least V 9.20, with restrictions as of V 7.00)
Control of the individual modules with the UFO®compact control unit or PC/laptop plus USW 30 software
Enables the remote control/remote maintenance of UFO®compact systems by means of a modem and telephone circuit or of a LAN
Local operation with UFO®compact control unit
Local operation via USB port by means of a PC/laptop plus USW 30 software
Operation via Ethernet interface (locally or via LAN with TCP/IP protocol) by means of a PC/laptop plus USW 30 software
A modem can be connected to the USB port of the UFX 314 via RS 232 interface by means of an RS 232 adaptor cable (recommended modems: see USW 30; recommended adaptor cable: adaptor with FTDI or prolifi c chip set)
Up to 2,048 UFX 314 can be connected via one or more Ethernet splitters (switch/hub), and be commonly controlled in groups of 8 units each
Power supply to the UFX 314 and the control unit that may be connected to it is effected through a separate connection from the UFG 412 power supply unit
30
UFO®compact signal processing system
Features
Programming of all channel unit parameters via PC or laptop
Programming of existing UFO®compact systems via PC or laptop - all settings can be read out, saved and printed
Saved programmings can be read into either new or back-up systems that are assembled in the same way
Up to eight serially connected systems can be controlled at the same time
Remote control/remote maintenance of UFO®compact systems with PC or laptop via modem and telephone line or via a local area network (LAN)
Recommended modems:
Analogue: “3Com US Robotics 56k Message Modem“ or “Devolo MicroLink 56k Fun II“ISDN: “Elsa MicroLink ISDN/TLV.34“GSM: “Siemens M35“
Photorealistic on-screen display of the UFO®compact system
Clear representation of individual selections of a UFO®compact system in fi le card systems
Automatic recognition of the connected system
Language change-over German/English/French/Spanish
System requirements hardware:
Clock frequency at least 400 MHz320 MB RAM and 90 MB hard disk spaceGraphics card (resolution: 1,024 x 768)
System requirements software:
Operating system: Microsoft Windows 98SE/ME/NT/2000/XP (Vista from version 3.2 on), Solaris, LinuxJava Virtual Machine (JVM): at least Version 1.5.0 (supplied)
Delivery scope:
CD, RS 232 null modem cable, USB cable, manual (on CD)
Software
USW 30 20610041
Easy-to-use Java software for UFO®compact signal processing systems that are equipped with the UFX 312 data bus de-multiplexer.
31
UFO®compact signal processing system
Features
For headends installed in 19“ cabinets
Installation height/construction: 41 HU (= 2 m)Width: 60 cm, depth: 60 cm
Dimensions (mm):600 x 2,000 x 600 without glass door, 600 x 2,000 x 670 with glass door
Packing unit/weight (pc./kg): 1/31 net
19” support frame
TUG 100 24310003
TUG 100 with ESO 06 and ZSO 210
Note:The ambient temperature limits for the UFG 3xx UFO®compact (extension) module carriers must be considered should they be used! Additional cooling may be necessary.
Features
Two side and rear panels for the TUG 100
Accessories for the 19” frame
ESO 06 24310005
Features
Glass door for TUG 100
ZSO 210 24310007
Packing unit/weight (pc./kg): 1/37 net
Packing unit/weight (pc./kg): 1/19.7 net
32
UFO®compact signal processing system
Features
Front panel (1 HU)
For cable passage and ventilation
Accessories for the 19” frame
ZSO 200 24310004
Packing unit/weight (pc./kg): 1/0.2
Features
To mount the other headend components into TUG 100
19” module rack
TGZ 10 236430
Dimensions (mm): 483 x 267 x 198 (19“, 6 HU)
Packing unit/weight (pc./kg): 1/3.3
Features
To mount EAX 24/26/28 and EBC 06/08 as splitters and couplers (e.g. in optical transmission and reception stations)
Dimensions (W X H X D) in mm: 483 x 221 x 190 (19“, 5 HU)
Packing unit/weight (pc./kg): 1/2.9
TGZ 15 24310006
TGZ 15 fitted
Features
Front panel (1 HU)
For cable passage and ventilation
ZSO 74 276249
Packing unit/weight (pc./kg): 1/0.2
33
5
22
System example with 48 modules
A 1
A 3
A 2
A 4
UFO®compact signal processing system
Features
The example system is valid for both a wall-mounted system or for one in a 19“ cabinet
Passive coupling of the module carriers with subsequent amplifi -cation using the launch amplifi er VOS 135/G ensures that the system offers highest S/N (antenna dimensioning dependant) and optimal CTB/CSO parameters
KAZ 11
FM
Further external IF-splitting using the EBC 10/13/14
VWS 2500 supplies the LNB and compensates any cable and splitting losses
KAZ 11 is used for voltage surge protection and to provide a defi ned earthing point.With test socket -20 dB
FM
Antenna example: CAS 120/124, CN in ASTRA reception in Munich 20.7 dB
34
UFO®compact signal processing system
The data given are typical values, valid for transponder bandwidths of 27 MHz, e..g. for Astra 1 and for Eutelsat/Hotbird.
The values are based on an over-site EIRP power of 52 dBW.
Antenna -Feed system Band G/T
dB/KC/N
HamburgC/N
MunichC/N
ParisC/N
LondonC/N
MadridC/N
Milan
CAS 09/90 -UAS 584
Low-bandHigh-band
18,819,8
18,3 18,7 18,5 18,3 18,8 18,8
CAS 120/124 -UAS 484
Low-bandHigh-band
22,023,0
21,5 21,9 21,7 21,5 22,0 22,0
CAS 120/124 -EAS 484
Low-bandHigh-band
20,621,6
20,0 20,5 20,2 20,2 20,2 20,2
CAS 180 -EAS 484
Low-bandHigh-band
23,824,8
23,3 23,7 23,4 23,4 23,4 23,4
*) Astra 1 and Eutelsat reception Due to the high transmission power, when using an antenna > 1.2 m in diameter the LNB could be over-loaded (intermodulation products would then reduce the C/N) We recommend using the professional quatro feed system EAS 484 with antennas > 1.2 m in diameter.
1. C/N on the output of UAS 484/EAS 484 *)
Note:
EN 50083-7 specifi es minimal C/N requirements for headends(not including system reserves): 15 dB for analogue signal processing 12 dB for digital signal processing
2. 2. S/N on output of analogue (CCIR B/G, PAL) output modules
No. of programmes 1 8 24 48 96Type S/N on output (dB)UFM 340 60,0 57,5 55,4 53,4 51,0UFM 341 61,0 58,2 58,1 58,0 58,0UFO 353 61,0 58,2 58,1 58,0 58,0UFO 354 60,0 57,5 55,4 53,4 51,0UFO 391 61,0 58,2 58,1 58,0 58,0UFO 393 60,0 57,5 55,4 53,4 51,0UFO 394 60,0 57,6 57,5 57,5 57,5
Notes:
If different analogue (PAL) modules are combined together in a system, then the lowest given S/N ratio in the above table for any one of the modules in this combination will apply as the overall valid S/N ratio. (e.g. 8 x UFM 340 and 8 x UFO 391 → the value given for the UFM 340 for 24 channels will be valid
The output signal and noise levels of QPSK-QAM and COFDM-QAM transmodulators are 10 dB (with 64 QAM) or 4 dB (with 256 QAM) lower than the signal levels of analogue signals, and therefore only insignifi cantly infl uence the signal to noise ratio of the analogue signals
35
UFO®compact signal processing system
Output level (dBµV) C/N (dB) S/N (dB) IM 2 (dB) IM 3*) (dB)
12 modules 98 66 67,5 60 60
Output amplifi er system data
*) 24 channel load
Standard coupling method for UFO®compact module carrier UFG 412
Coupling with UFG 412No. of modules Max. possible output level (dBµV)
EBC 02 2 x 12 110 (106) *)
EBC 03 3 x 12 108 (104) *)
EBC 04 4 x 12 107 (103) *)
3. Output coupling
*) UFO 394
Signal to noise and disturbance ratios dependent on the possible output levelsSelect the appropriate output level for a given disturbance ratio (CTB/CSO)Interpolate to receive intermediate values for other output levels
Output level (dBµV)
Signal-to-noise ratio C/N (dB) S/N (dB)
Disturbance ratio *) CTB (dB) CSO (dB)
110 70 71,5 60 63108 68 69,5 64 65106 66 67,5 68 67104 64 65,5 72 69102 63 64,5 76 71100 63 64,5 80 7398 62 63,5 84 75
*) According to DIN EN 50083-3, CENELEC channel plan 862 MHz
Output level (dBµV) C/N (dB) S/N *) (dB) CTB (dB) CSO (dB)Output UFG 412 77 - 53,4 - -Output VOS 135/G 100 63 64,5 80 73Total 100 - 53,1 80 73
*) The sum total S/N is calculated with a power addition of the two S/N values
4. Headend system data - overall view
Assumptions:UFO®compact system 19“ with 48 PAL programmes (UFO 393), QAM transponders and external VOS 135/GSelected output level: 100 dBµV
3.1 Module carrier UFG 412 with wall mounting set UFZ 412 and integrated output amplifi er
3.2 Passive coupling of carriers (without integrated launch amplifi er) and external launch amplifi er VOS 135/G
3.3 VOS 135/G system data
C/N = output level - gain - noise fi gure - 2 dBµV (RF noise ratio)S/N = C/N + 1.5 dB (video noise ratio, weighted)
UFO®compact signal processing system
Catalogue and special brochures
MEASURINGMeasuring InstrumentProgramme 2009
Measuring Instrument Programme
More channels -More channels -KathreinSatIFKathrein Sat IFDistributionDistributionSystemSystem
Sat IF
More channels -Sat-IF distribution system
SATSatellite and TerrestrialAntenna Products and Systems
001_Intro.indd 1001_Intro.indd 1
20.01.2009 09:52:49
Satellite and TerrestrialAntenna Products and Systems
Offset parabolic antennasFeed systemsDigital receiversCaravanTerrestrial antennasMounting accessoriesDiplexersCables, plugs, transitions
Amplifi ersSat-IF distribution systemSingle-cable systemUFO®compact processingAccessories for the distribution networkMeasuring instrumentsTechnical appendix
Internet: www.kathrein.de • E-mail: sat@kathrein.deKATHREIN-Werke KG • Telephone +49 (0) 8031 184-0 • Fax +49 (0) 8031 1 84-3 06 Anton-Kathrein-Straße 1-3 • P.O. Box 100 444 • 83004 Rosenheim/Germany
9981
1303
/3/0
409/
ZWT/
PF
Te
chni
cal d
ata
subj
ect t
o ch
ange
.
Your contact:
top related