turbine meter series fmt-s - condros

TURBINE METER SERIES FMT-S

The FMT-S series of short body turbine meters (or Quanto Meters) are designed for secondarymeasurement, industrial applications and custody transfer metering. By positioning the turbine wheel inthe back of the meter, a full length flow conditioner could be integrated in the meter and as such theshort body turbine meter type FMT-S performs at the same level as the traditional 3 x D length turbinemeter. With the newly designed flow conditioner, the minimum straight length upstream according theOIML low and high level perturbations, is even less than 1 x D.

ww

w.f

low

met

erg

rou

p.c

om

OPTIONS: ENCODER / INTEGRATED THERMO WELL / HIGH AND LOW FREQUENCYOUTPUTS / OILPUMP / TOTALLY SEALED / MAGNETIC FIELD PROTECTION

9DN80 – DN300 (3” - 12”)9PN16 – PN100, ANSI150 – ANSI60098 – 6500 m3/h (300 – 230,000 acfh)9EXCHANGEABLE CARTRIDGE

9OIML, MID, PED, ATEX APPROVED9FOR CUSTODY TRANSFER9< 1xD STRAIGHT INLET (approved)9SHORT METER BODY

9MID APPROVED

Subject to changes without prior notice. All rights reserved. FMT-S FEN001 rev.3

ww

w.f

low

met

erg

rou

p.c

om

ww

w.f

low

met

erg

rou

p.c

om

237237237178178178154154154kg

521521521392392392339339339lbs.Net Weight Steel ANSI600, PN64/100

190190190129129129128128128kg

418418418284284284282282282lbs.Net Weight Steel ANSI300, PN25/40

141141141909090999999kg

310310310198198198218218218lbs.Net Weight Steel ANSI150, PN16

PN16 (aluminum), PN16, PN25, PN40, PN64, PN100DIN

150#FF (aluminum), 150#RF, 300#RF,600#RFANSIFlange Connection

300300300250250250200200200mm

121212101010888in.Flange-to-Flange

10101010101010101 or 10m3/rev

1000100010001000100010001000100100cf/revDrive Rate Index, ID

16001000600160090060017001200800kPa100% Flow Natural Gas 1barg

6,33,92,46,33,52,46,74,73,1in. w.c.Average Differential @

aluminum -25 to +55, Steel -10 to + 55 (-25 to +55 on request)deg.C

aluminum -13 to +131, Steel +14 to + 131 (-13 to +131 on request)deg.FTemperature Range

better than 0,1%%Repeatability

better than 1% (typical better than 0,5%)%Accuracy 20% Qmax to Qmax

better than 2% (typical better than 1%)%Accuracy Qmin to 20% Qmax

505050505050505050ratioRangeability >16 bar natural gas

303030303030303030ratioRangeability >8 bar natural gas

202020202020202020ratioRangeability atmopheric air

650040002500400025001600250016001000m3/h

230000140000900001400009000060000900006000035000acfhBase Rating (Qmax)

300300300250250250200200200mm

121212101010888in.Nominal Pipe Size

G4000G2500G1600G2500G1600G1000G1600G1000G650metric

T230T140T90T140T90T60T90T60T35imperialTechnical Data

484848383838303030kg

105105105838383656565lbs.Net Weight Steel ANSI600, PN64/100

434343343434272727kg

959595757575595959lbs.Net Weight Steel ANSI300, PN25/40

363636292929232323kg

797979636363505050lbs.Net Weight Steel ANSI150, PN16

242424191919151515kg

535353424242333333lbs.Net Weight Aluminum

PN16 (aluminum), PN16, PN25, PN40, PN64, PN100DIN

150#FF (aluminum), 150#RF, 300#RF,600#RFANSIFlange Connection

175175175150150150120120120mm

6-7/86-7/86-7/85-7/85-7/85-7/84-3/44-3/44-3/4in.Flange-to-Flange

1 or 1011111111m3/rev

100100100100100100101010cf/revDrive Rate Index, ID

1400700500145070050017001100700kPa100% Flow Natural Gas 1barg

5,52,82,05,72,82,06,74,32,8in. w.c.Average Differential @

aluminum -25 to +55, Steel -10 to + 55 (-25 to +55 on request)deg.C

aluminum -13 to +131, Steel +14 to + 131 (-13 to +131 on request)deg.FTemperature Range

better than 0,1%%Repeatability

better than 1% (typical better than 0,5%)%Accuracy 20% Qmax to Qmax

better than 2% (typical better than 1%)%Accuracy Qmin to 20% Qmax

505050505050505050ratioRangeability >16 bar natural gas

303030303030303030ratioRangeability >8 bar natural gas

202020202020202020ratioRangeability atmopheric air

16001000650650400250400250160m3/h

600003500027000270001800090001800090006000acfhBase Rating (Qmax)

150150150100100100808080mm

666444333in.Nominal Pipe Size

G1000G650G400G400G250G160G250G160G100metric

T60T35T27T27T18T9T18T9T6imperialTechnical Data

Flow Meter Group, Meniststraat 5c, 7091 ZZ Dinxperlo, The Netherlands