traffic monitor for veraz pses

N E T W O R K SN E T W O R K S

Traffic Monitor Course

N E T W O R K SN E T W O R K S

Traffic Monitor - Outline Apuntes JFK

• A tool for Veraz PSEs that helps them analyze GW problems.

• It must be installed in the xMS server.

• Activate after installation as follows:Start Programs Traffic Monitor Traffic Monitor

• Define the card with which you want to connect:– With a DSPK card for traffic monitoring – With a D32M card for signaling monitoring

N E T W O R K SN E T W O R K S

Traffic Monitor

• Traffic Monitor was designed for– R&D integration environment– Debug tool (Technical support)

• Possibility to check traffic status in different locations– Incoming to the I Gate terminal – TDM level– Between Terminals – IP level

• The Traffic monitor scope – Voice

• This course will describes how to configure and activate the monitor options

N E T W O R K SN E T W O R K S

Three Monitor options

Traffic Monitor

Voice TDM Recording

Media GatewayOr

Interface Manager

IP Recording

Signaling,RTP, MGCP

Dynamic Recording

IPRecording

Voice TDMRecording

N E T W O R K SN E T W O R K S

Monitor location

• The following drawing describe the different traffic monitor location.

DSPK

D32M

TPSM

DSPK

D32M

TPSM

IP

Side A Side B

TDM Recording in (TM ) Voice

Recording from single TDM card IP Sniffing (in TM) -

( In DSPK and also D32M )

Soft Switch Recording

N E T W O R K SN E T W O R K S

Traffic Monitor main screen

N E T W O R K SN E T W O R K S

ICON list

N E T W O R K SN E T W O R K S

Connection to MG cards

1.Connect to the Terminal 2.Select the MG address IP card3.Click – Get card

N E T W O R K SN E T W O R K S

Row..

• In the details table double click on the first empty row.

• In the Configuration Row window, select - All Trunks –option.

N E T W O R K SN E T W O R K S

Connect the MG

• MG connection was created• Mark the MG card and click on the –

Connect - Icon

N E T W O R K SN E T W O R K S

Led View

• The Led View window will be open

N E T W O R K SN E T W O R K S

TDM Recording example

• Point the mouse to the channel (TS)

N E T W O R K SN E T W O R K S

TDM recording activation

• Right click and select , “ TDM Recording in TM”

• Assigned a new folder in the file name and click on Start

• TDM recording will start

N E T W O R K SN E T W O R K S

End of record

• When we wish to end the record, from the Led View window select the –Stop Record icon – and select – Stop TDM Recording (in TM)

• Select the TDM record• Stop TDM Record• A new record file was created

N E T W O R K SN E T W O R K S

Recording Proc

Select the Recording Proc icon and open the recorded file

N E T W O R K SN E T W O R K S

Recording Proc

• Mark the lower check box• Click on the Analyze icon• Two . BIN file were created

N E T W O R K SN E T W O R K S

Voice file creation

• 4 types of Voice record were created

N E T W O R K SN E T W O R K S

TDM card recording

• Second possible option is to record a TDM channel from the Interface management card

N E T W O R K SN E T W O R K S

TDM card recording

• Select the D32M card• Select the SPAN location• Select – Start Sniff

N E T W O R K SN E T W O R K S

Stop TDM card recording

• Select MG card and stop the recording

N E T W O R K SN E T W O R K S

Recording Proc – for Voice Recording

• Select the Recording Proc icon and open the recorded file

N E T W O R K SN E T W O R K S

Tdm2cap – Use for Signaling

• 2 .snf files were created• Use the Tdm2cap to

create .eth file

N E T W O R K SN E T W O R K S

Open the file ……..

• Use WireShark to open eth files

N E T W O R K SN E T W O R K S

Option - Recording from two cards …

• Select one MG card to activate double recording

N E T W O R K SN E T W O R K S

Stop recording from two cards …

• This type of recording will generate two files– (one file per card)

• Use WireShark application to check the files

N E T W O R K SN E T W O R K S

IP sniffing

• Possible option to record different types of Signaling over IP• Select the card • Select IP sniffing (in TM) option

N E T W O R K SN E T W O R K S

Types of filter

• Different types of Filter level can be selected

N E T W O R K SN E T W O R K S

Stop IP sniffing

• To Stop Sniffing, select the card• Select – stop IP sniffing

N E T W O R K SN E T W O R K S

Open the file ……..

• Use WireShark to open eth files

N E T W O R K SN E T W O R K S

Dynamic Records

• The ability to record using the Traffic Monitor with out knowing the TS location. – (The TS that was selected for test call )

xMS GWConnect

CCP

CRCX

Recall

Call

Trace

N E T W O R K SN E T W O R K S

Dynamic Recording – Step by step

• Check MG connection – Side A and Side B

N E T W O R K SN E T W O R K S

Lunch the Soft Switch recording option

• Select the S tab• Select Start tab to activate the recording

N E T W O R K SN E T W O R K S

Call trace activation

• Use Calling and Called Party Number

N E T W O R K SN E T W O R K S

Stop recording

• Select the STOP tab to stop recording• Two types of file were created

– .IP and .TDM

N E T W O R K SN E T W O R K S

TDM file…..

• Select the Recording Proc icon and open the recorded file• 4 Voice file were created

N E T W O R K SN E T W O R K S

IP file…..

• Use the WireShark to open the file

N E T W O R K SN E T W O R K S

IP sniffing example (1)

• Select the IAM message (double click it)

N E T W O R K SN E T W O R K S

IP sniffing example (2)

• Or …. Select the message and right click it• Select Show packet in new window

N E T W O R K SN E T W O R K S

IP sniffing example (3)

• Possible option to see different layers in the IAM massage

N E T W O R K SN E T W O R K S