trademark packaging associates 2013

Container Decorating & Packaging Services

361 W. Gordon St. Allentown, PA 18102610.432.8060 • www.trademarkdeco.com

Trademark Packaging Associates LLC -- a division of Phoenix Global Partners LLC -- is a container decorator based in the Lehigh Valley of Pennsylvania.

We are short-run specialists, yet we maintain scalable operations and processes to easily accommodate large volumes.

As a dedicated decorator and packaging outsource partner, we relieve your organization of operations and overflow processes that take resources away from your primary focus.

With our sister division Phoenix Cosmetic Tools (cosmetic applicator manufacturing and distribution) we help you consolidate suppliers and promote your business.

Core Values Respect – for all. Customers, suppliers,

employees, and business partners.

Integrity – we keep our promises. To our customers and our stakeholders.

Continuous Improvement – we’ll keep getting better. Our products and services, our processes, and our people.

Core PurposeOur mission is to help our customers make great products!

•Trademark Packaging Associates is located in a 40,000 sq-ft facility that houses our manufacturing, warehouse, quality control, sales/customer service, and corporate offices.• We are located in a qualified SBA HUBZone and employ roughly 25 personnel. • Our facility is located in the Lehigh Valley, conveniently between the New York/New Jersey and Baltimore/Washington metro areas.

We specialize in screen printing and can accommodate various shapes, sizes and substrates, including glass.

We can hot stamp more than 100 million impressions annually to shrink lead-times, reduce cost and maintain quality.

With our 10 lines for pressure sensitive labeling we canaccommodate tubes, bottles, jars and closures; these products canbe glass, plastic, metal or paper.

Our application processes also include tamper evident shrinkbanding, pad printing, heat transfer labeling, and full label shrink sleeve labeling, on round or irregular shaped tubes, closures, pumps and other components.

We also offer container inspection and sorting services, and third party logistics with our product assembly, kitting and global order fulfillment services.

We will have your job in production within three weeks of receiving all components, artwork, approvals, and a PO or we will pay the freight

on the first delivery!

• Kitting

•Pick & Pack

• Full and Partial Product Assembly

• Inventory Management

• Marketing Collateral Distribution

• Domestic & International Shipping

• Commercial & Consumer Order

Processing

• Product Filling (e.g. fragrance)

• Any substrate – glass, plastic, and metal

• Bottles, jars, tubes

• Cylinders, rounds, ovals, flats, tapers

• One to four-color printing

• Excellent color matching

• Art manipulation (as needed)

• In-house surface treatment

• Label and screen print capability

• In-house screen-making and storage

• Pre-production samples

• Closures, flexible & rigid tubes, vials, bottles, tottles, jars• Rounds, squares, ovals, irregular shapes/contours

• Part sizes from 3/8” (10mm) to 6” (150mm)

• Foil width capacity up to 6” (150mm)

• Metallic and pigment foils, gloss, matte orholographic

• Roll-on, tip stamp, embossing on plastic or

glass

• Speeds to 30 ppm

• Registration to eye marks, deco lugs, SS oroffset printing

• Hot stamp placementHeight +/- 1/32”Askew +/- 1/32”Registration +/- 1/8”

• Bottles, closures, pumps, tottles, jars• Tamper evident and full sleeve banding

• PVC, OPS, PLA films

• Printed films, heat activated adhesive films

• Conveyor, timing screw and

“puck” feed systems

• Rounds, squares, irregular

shapes/contours

• Plastic or glass containers

• Pre-cuts or roll stock

•Tube Sizes from 5/8” (16MM) min to 3” (77MM) max diameter

• 3” (75MM) Min to 7” (150MM) max length• Speeds 40 to 70 PPM

• Print registration capability to eye mark or closure“Thumb Nail”

• 350 or 370 wrap

• Spot labeling including promotional or booklets

• Label placement specifications:Height +/- 1/32”

Askew +/- 1/32”Registration +/- 1/8”

• Label width capacity from 1” (25MM) to 6.750” (170MM)

• Label rolls 12” OD on 3” or 6” cores

• Labels on paper or Mylar carrier

• Tube sizes from 5/8” (16mm) min to 3” (77mm)max diameter

• 3” (75mm) min to 7” (150mm) max length

• Speeds 40 to 70 ppm

• Oval, irregular shape, and round capabilities

• UPC label application w/ verification

• Label placement specifications:Height +/- 1/32”Askew +/- 1/32”Registration +/- 1/8”

• Label width capacity from 1” (25mm) to 6.750” (170mm)

• Label rolls 12” OD on 3” or 6” cores

• Labels on paper or Mylar carrier

• Conveyor/“Puck” system

• Part sizes from 1” (25mm) to 4 3/8” (110mm) rounds

• Speeds 40 to 100 PPM

• Irregular shapes/contours and flats

• Full and spot labeling including promotional or booklets• Label placement specifications:

Height +/- 1/32”Askew +/- 1/32”

• Label width capacity from 1” (25mm) to 4.00” (100mm)

• Label rolls 12” OD on 3” or 6” cores

• Labels on paper or Mylar carrier

• Conveyor/Puck system

• Part sizes from 1” (25mm) to 4 3/8” (110mm) rounds

• Speeds 40 to 100 ppm

• Irregular shapes/contours and flats

• Full and spot labeling including promotional or

booklets

• Label placement specifications:Height +/- 1/32”Askew +/- 1/32”

• Label width capacity from 1” (25mm) to 4” (100mm)

• Label rolls 12” OD on 3” or 6” cores

• Labels on paper or Mylar carrier

• Round plus irregular shaped rigid and semi-rigid bottles/jars glass or plastic• Part sizes from 3/8” (10mm) to 4” (50mm) diameter

• Irregular shapes/contours

• Speeds 40 to 200 ppm

• Full 370 or 350 degree wrap

• Spot labeling (registered or non-registered)

• Label placement specifications:Height +/- 1/32”Askew +/- 1/32”Registration +/- 1/8”

• Label width capacity from 1” (25mm) to 6.750” (170mm)

• Label rolls 12” OD on 3” or 6” core

• Labels on paper or Mylar carrier

• Plastic or glass, rigid and semi rigid containers

• Rounds, squares, irregular shapes/contours

• Filled or un-filled

• Speeds 40 to 100 ppm

• Spot labeling (registered or non-registered)

• Label placement specifications:Height +/- 1/32”Askew +/- 1/32”Registration +/- 1/8”

• Label width capacity from 1” (25mm) to 4” (100mm)

• Label rolls 12” OD on 3” or 6” cores

• Labels on paper or Mylar carrier

• Tubes, bottles, jars, tottles, closures, glass and plastic

• Rounds, squares, irregular shapes/contours

• Part sizes from 3/8” (10mm) to 3 ½” (89mm)

• Speeds to 20 ppm

• Full over wrap

• Spot Labeling (registered or non-registered)

• Label placement specifications:Height +/- 1/32”Askew +/- 1/32”Registration +/- 1/8”

• Label width capacity from 1” (25mm) to 4” (100mm)

• Label rolls 12” OD on 3” or 6” core

On site Screen Making & Storage –including image correction

In-house Machine Shop – reduces tooling time and costs

Sorting & Inspection Services – pre-job or as a stand-alone service

Blankware, label and component storage -- inventory and feeder program

Trademark Packaging Associates is happy to quote on your next decorating project. Please contact us to discuss the best decorating solution for your needs, and to learn more about our other divisions

Phoenix Cosmetic Tools and Trademark Branded Products.

361 W. Gordon St.Allentown, PA 18102

P: 610-432-8060F: 610-432-8098

www.trademarkdeco.com