tm 2020 mask pattern/media/files/pdf/... · 2020-04-20 · tm 2020 pattern . tommye austin, rn...

Post on 20-May-2020

13 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

TM 2020 PATTERN

Tommye Austin, RN Senior Vice President & Chief Nurse Executive

University Health System, San Antonio, TX

04/17/2020

Page 2 of 11

TM2020 Pattern and face mask instructions are being provided to you for those interested in making face masks to wear for their personal use. Public health experts do not consider homemade masks to be effective personal protective equipment inside clinical environments or for those caring directly for people with COVID-19. The instruction manual is being provided to you for noncommercial, recreational purposes only and is not a guarantee of health or wellness or prevention of illness.

Please direct any questions or concerns to: Public.Relations@uhs-sa.com.

Copyright ©TM2020, by Tommye Austin, PhD, MBA, RN, NEA-BC used with permission.

Materials Needed • Cotton weave fabric or surgical drape

• AC Filter material with a MERV rating of >13 or better

• All purpose thread

• Bobbin thread

• 1/8 inch elastic (20 inches per mask)

• Scissors

• Swimmer’s tape

Page 3 of 11

Instructions

1. Cut two 12 x12 pieces of AC filter material with a Merv rating of 13 or higher. Cut two pieces of 1/8 inch elastic: neck piece is 8 inches and head pieces is 10 inches. Please measure your head and neck if you want a tighter seal.

Page 4 of 11

2. Fold the 12 x 12 inch square of fabric in half.

Page 5 of 11

3. Fold Fabric 1 inch upward on each side to create air pocket. This fold creates the air pocket that allows the user to breathe better and avoid carbon dioxide build up.

Page 6 of 11

4. Measure mask across the face from cheek to cheek and mark.

Page 7 of 11

5. Press down seams at top of mask for ½ inches

Page 8 of 11

6. Trim edges across the top of the mask

------

Page 9 of 11

7. Insert metal nose piece and stitch it in place.

Page 10 of 11

8. Stitch each end elastic to each corner at the top of the mask. Stitch all layers together using a straight stitch. The filter material should be sandwiched between layers of the cotton fabric or surgical drape.

Page 11 of 11

top related