the reset glitch hack_xbox360fat_en
Post on 05-Apr-2018
227 Views
Preview:
TRANSCRIPT
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 1/12
(XC2C64A) X360Glitch chip
1
The Reset Glitch Hack
This Tutorial explains how to hack your Xbox360 FAT with the Reset Glitch Hack.
Required Software and Hardware
Software
•
Python and Pyton Crypto
•
NandPro (>= v2.0e)
Hardware
•
USB SPI Programmer to dump/flash the Xbox360's NAND
•
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 2/12
2
1. Dumping NAND
• Use the following diagram to solder your USB SPI Programmer
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 3/12
3
• Open windows' command prompt and launch NandPro.
• Dump your NAND twice by using the read command :
★If you have a 16mo nand
nandpro usb : -r16 nanddumpname.bin
★If you have a 256/512mo nand nandpro usb : -r64 nanddumpname.bin
• Compare the two dumps with the following command (you can use MD5 Checksumstoo) :
fc /b nanddumpname.bin nanddumpname2.bin
• You should see something like FC : No difference found. If the two dumps don't match,do a new dump and check again.
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 4/12
4
2. Installation of Python and Python Crypto
• Install Python 2.7 (32bit!) with the default settings :
• Install PyCrypto 2.3 with the default settings :
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 5/12
5
To enable python in windows' command prompt, we will have to modify the environmentvariables .
• Go in Control Panel > System > Advanced system settings
• Click on environnement variables
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 6/12
6
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 7/12
7
• Click on New in system variable
• Add this for the name and the value of the variable :
PYTHONPATH
%PYTHONPATH%;C:\Python2.7 ;
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 8/12
8
3. Creating the Hackimage
• Download the gggggg-hack (Free60-Git Repository).
• Put your original NAND dump in the root of the gggggg-folder and create an foldernamed "ouput" (in the root aswell).
• In the common/imguild, do a right clik on the build.py, and open with it IDLE.
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 9/12
9
• Then add the 1BL like that :
\xDD\x88\xAD\x0C\x9E\xD6\x69\xE7\xB5\x67\x94\xFB\x68\x56\x3E\xFA
• Open windows' command prompt again and navigate to the gggggg-folder, then type thispython command (don't forget to modify it with your NAND dump name) :
python common\imgbuild\build.py originalnand.bin common\cdxell\CDjasper
common\xell\xell-gggggg.bin
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 10/12
10
you should see the following
The file image_00000000.ecc is located in the output folder now.
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 11/12
11
• Copy this file into your nandpro folder and navigate to the folder via commandpromptagain
• Use the following command to flash the image to your console's NAND.
★If you have a 16mo nand
nandpro usb : +w16 image_00000000.ecc
/!\ Pay attention that you have to use the +w16 switch and not the -w16 one /!\
★If you have a 256/512mo nand
nandpro usb : +w64 image_00000000.ecc
/!\ Pay attention that you have to use the +w64 switch and not the –w64 one /!\
The flashed file has a size of 50 blocks so you should see 004F when the flashing is done.
8/2/2019 The Reset Glitch Hack_Xbox360Fat_EN
http://slidepdf.com/reader/full/the-reset-glitch-hackxbox360faten 12/12
4.
12
Links
•
Free60 git Repository
•
NANDPro v2.0e
•
Python 2.7.2 32bit
•
PyCrypto 2.3
•
Xilinx Lab Tools
top related