the machinability of fluxtrol induction magnetic flux concentrators

Fluxtrol Machining

An Overview of the Machinability of Fluxtrol Induction Magnetic Flux Concentrators

Fluxtrol.com 1-248-393-2000

Machinable Induction Magnetic Flux Concentrators

Fluxtrol Offers Complete CNC Machining Capabilities

Fluxtrol.com 1-248-393-2000

Drilling Fluxtrol’s InductionMagnetic Flux Concentrators

All of the Fluxtrol soft magnetic concentrators or controllers can have holes drilled in them

Fluxtrol.com 1-248-393-2000

A wide variety of drilling characteristics and parameters can be used to effectively remove material

Turning of Fluxtrol Induction Magnetic Flux Concentrators

All of the Fluxtrol soft magnetic concentrators or controllers can be cut using a lathe or turning machine

Fluxtrol.com 1-248-393-2000

A wide variety of turning characteristics and parameters can be used to effectively remove material

Milling of Fluxtrol Induction Magnetic Flux ConcentratorsAll of the Fluxtrol soft magnetic concentrators or controllers can be cut using a milling machine.

Fluxtrol.com 1-248-393-2000

A wide variety of milling characteristics and parameters can be used to effectively remove material.

Sawing Fluxtrol Induction Magnetic Flux Concentrators

All of the Fluxtrol soft magnetic concentrators or controllers can be cut using a band saw.

Fluxtrol.com 1-248-393-2000

A wide variety of band saw characteristics and parameters can be used to effectively cut the material.

Machining Magneto-Dielectric Materials

Fluxtrol.com 1-248-393-2000

Completely machinable into virtually any shape!

Induction Coil Channel Concentrators

Fluxtrol induction channel concentrators come in virtually any shape or size.

Fluxtrol.com 1-248-393-2000

Direct Internal Water Cooling for Induction Magnetic Field Concentrators

When extra cooling is needed Fluxtrol concentrators can be tapped directly to achieve internal water cooling, although we recommend the installation of a threaded insert for improved strength.

Fluxtrol.com 1-248-393-2000

Fluxtrol.com 1-248-393-2000

Fluxtrol Induction Magnetic Flux Concentrator Material Can Be Threaded

Machining Induction Magnetic Field Concentrators

Fluxtrol can machine its magnetic flux

concentrators into nearly any shape you need

Fluxtrol.com 1-248-393-2000

Fluxtrol magnetic flux concentrators can be cut into virtually any shape.

Fluxtrol.com 1-248-393-2000

Fluxtrol Concentrators Can Be Cut Into Any Geometry

For help machining Fluxtrol induction heating concentrators

just contact us at:

Fluxtrol.com

1-248-393-2000

Fluxtrol.com 1-248-393-2000

Machining Induction ConcentratorsFluxtrol’s CNC Machining Centers can cut any geometry to your requirements

Fluxtrol.com 1-248-393-2000

Induction Concentrator Thin Side Shields

Fluxtrol can produce magnetic shields as thin as 1.3 mm.

Fluxtrol.com 1-248-393-2000

Intricate Milling of Induction Concentrator

Fluxtrol’s CNC Machining Centers can cut delicate and unusual geometries

Fluxtrol.com 1-248-393-2000