the fits -all mount tm universal electronics mounting bracket the fits -all mount tm haltof product...
Post on 15-Dec-2015
219 Views
Preview:
TRANSCRIPT
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
The Fits-All mountTMHaltof Product Design, inc.
This presentation was part of our Fits-ALL kiosk at
CES 2008.
The slides that follow describe how the Fits-ALL universal bracket was installed on the
kiosk dash.
Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
The
INSTALL ANY DASH-MOUNTED DEVICE, IN ANY VEHICLE
USING JUST THIS ONE BRACKET!
-
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
Any device, bolted to any dash, WITH NO VISIBLE HOLES!
The Fits-All mountTMHaltof Product Design, inc.
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
That can be removed, WITHOUT LEAVING A TRACE!
The Fits-All mountTMHaltof Product Design, inc.
See…, No holes, No glue residue, Just a good-as-new dash!
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
The Fits-All mountTMHaltof Product Design, inc.
So, how can just ONE bracket, mount ANY dash-mount-able device,
to ANY dash location, on ANY vehicle dashboard?
It will take less than 2 minutes to find out, so please stay tuned.
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
FIRST, remove dash trim panel, and fold it down.
PULL herePULL here
The Fits-All mountTMHaltof Product Design, inc.
Go ahead, gently pull the dash trim panel out, and fold it down!Thank you!
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
Mounting locations can now be found INSIDE the dash.
The Fits-All mountTMHaltof Product Design, inc.
The Fits-All can be modified to fit almost anywhere on the dash using the included Prototyping Templates.
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
Find a good location for the bracket, usually next to the edge of the dash trim panel.
Prototyping Template
Bend and cut the Prototyping Template to line-up with available screws and mounting surfaces.
The Fits-All mountTMHaltof Product Design, inc.
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
The Fits-All mountTMHaltof Product Design, inc.
Transfer the bend and cut line to the bracket. Position the Metal Benders 1/16” on either side of the bend line.
The bracket in now easily bent, and adjusted, even while sitting in the vehicle.
Continue until the bracket matches the Prototyping Template.
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
Install the Bracket that has been modified to match the Template.
Modified Fits-All mount
The Fits-All mountTMHaltof Product Design, inc.
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
Replace the trim panel and you are ready to mount your device.
The Fits-All mountTMHaltof Product Design, inc.
Please replace the trim panel now.
Thank you!
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
Your new device may now be attached using its mounting cradle.
The Fits-All mountTMHaltof Product Design, inc.
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
The Fits-All mountTMHaltof Product Design, inc.
Thank you for your interest in our product.
See the innovative product package that includes 2 Prototyping Templates.
More information can be found on the Product page of our web site:
www.haltof.com
A .pdf file of the Fits-ALL brochure is also available.
Thanks again for your time.Click on this slide to see the presentation again.
Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
The
INSTALL ANY DASH-MOUNTED DEVICE, IN ANY VEHICLE
USING JUST THIS ONE BRACKET!
The Fits-All mountTM
UNIVERSAL ELECTRONICS MOUNTING BRACKET
The Fits-All mountTMHaltof Product Design, inc.
top related