tenda w311r manual
Post on 02-Jun-2018
233 Views
Preview:
TRANSCRIPT
-
8/10/2019 Tenda w311r Manual
1/79
11N Wireless Broadband Router
1
-
8/10/2019 Tenda w311r Manual
2/79
11N Wireless Broadband Router
Copyright Statement
is the registered trademark of Shenzhen
Tenda Technology Co., Ltd. All the products and product
names mentioned herein are the trademarks or
registered trademarks of their respective holders.
Copyright of the whole product as integration, including
its accessories and software, belongs to Shenzhen
Tenda Technology Co., Ltd. ithout the permission of
Shenzhen Tenda Technology Co., Ltd, any individual or
party is not allowed to copy, plagiarize, imitate or
translate it into other languages.
All the photos and product specifications mentioned in
this manual are for references only. As the upgrade of
software and hardware, there will be changes. And if
there are changes, Tenda is not responsible for
informing in advance. !f you want to know more aboutour product information, please visit our website at
www.tenda.cn.
2
http://www.tenda.cn/http://www.tenda.cn/ -
8/10/2019 Tenda w311r Manual
3/79
11N Wireless Broadband Router
Contents
5.4 DNS SETTINGS................................. 26
6.1 BASICSETTINGS................................ 27
3
-
8/10/2019 Tenda w311r Manual
4/79
-
8/10/2019 Tenda w311r Manual
5/79
11N Wireless Broadband Router
#.# 1roduct
-
8/10/2019 Tenda w311r Manual
6/79
-
8/10/2019 Tenda w311r Manual
7/79
11N Wireless Broadband Router
#.- 1ackage Contents
1lease unpack the bo8 and check the following items
>ne "##$%"##$& ireless (roadband
$outer
>ne Duick !nstallation /uide
>ne 1ower Adapter
>ne C50$>3
>ne *8ternal Antenna6only for "##$&7
!f any of listed items are missing or damaged, please
contact the Tenda reseller from whom you purchased
for replacement immediately.
#." L*5 !ndicator and 1ort 5escription
' indicates the power
connects well.
4
-
8/10/2019 Tenda w311r Manual
8/79
11N Wireless Broadband Router
SYS
hen turns green, blinking indicates the system
runs well.
WPS
hen blinking, it indicates the device is
negotiating with client in 1S mode.
WLAN
ireless signal L*5 indicator. hen turns green,
blinking indicates the wireless function is enabled.
LAN (!"!#!1$
ired local network L*5 indicator. Always >'
indicates it is connected with *thernet deviceE
blinking indicates the device is transmitting
and%or receiving data.
WAN
ide area network indicator. Always >' indicates
it is connected with *thernet deviceE blinking
indicates the device is transmitting and%or
receiving data.
5
-
8/10/2019 Tenda w311r Manual
9/79
11N Wireless Broadband Router
(ack 1anel Show
Rear Panel :( From L to R)
POWER
The 4ack is for power adapter connection. 1lease
use the included FG 5C power adapter.
WAN
A #3bps *thernet port can be connected with
3>5*3, Switch, $outer and other *thernet device
for !nternet connecting to 5SL 3>5*3, Cable3>5*3 and !S1.
LAN (1! #! "! $
2 #%#3bps *thernet ports can be connected
with *thernet switch, *thernet router and '!C
card.
RESE%
The system reset button. 1ress this button for H
seconds, the settings configured in this device will
be deleted and it will restore the settings to the
default one.
WPS
1ress it for # second, the 1S feature will be
enabled and 1S indicator will be shown blinking.
6
-
8/10/2019 Tenda w311r Manual
10/79
-
8/10/2019 Tenda w311r Manual
11/79
11N Wireless Broadband Router
Chapter # Product Insta&&ation
-.# Iardware !nstallation
After you unpack the bo8, please follow the steps
below to connect. $TA'T ?se of a different power
adapter could cause damage and void the warranty for
this product.
-. 1lease connect the LA' port of the $outer to the
network adapter of your computer with a cable.
8
-
8/10/2019 Tenda w311r Manual
12/79
11N Wireless Broadband Router
". 1lease connect your broadband line provided by
your !S1 to the A' port.
2. !nsert the included C50$>3 into the C50$>3 drive,
double click the 9Setup: icon and follow the
instructions to complete the installation. >r you can
enter the $outerJs eb page to configure it. 63ore
details please refer to Chapter ".7
9
-
8/10/2019 Tenda w311r Manual
13/79
11N Wireless Broadband Router
-.- 'etwork Application 1lan
?sually wireless LA' 'etwork is deployed in a planned
environment where each access point is located in a
steady place with certain wireless coverage area for
communication service. /enerally speaking, it is in the
center of the area to reduce 9dead spot:.
10
-
8/10/2019 Tenda w311r Manual
14/79
11N Wireless Broadband Router
Chapter " 'o to Login to the
Router
The chapter mainly presents how to enter the $outerJs
eb page. After you have finished the hardware
installation, the following steps will assist you to set
the network configurations for you computer.
".# Iow to Set the 'etwork Configurations
#. >n your computer desktop right click 93y 'etwork
1laces: and select 91roperties:.
11
-
8/10/2019 Tenda w311r Manual
15/79
11N Wireless Broadband Router
-. $ight click 9Local Area 'etwork Connection: and
select 91roperties:.
". Select 9!nternet 1rotocol 6TC1%!17: and click
91roperties:.
12
-
8/10/2019 Tenda w311r Manual
16/79
-
8/10/2019 Tenda w311r Manual
17/79
11N Wireless Broadband Router
".- Login to the $outer
#. To access the $outerJs eb0based interface, launch
a web browser such as !nternet *8plorer or
-
8/10/2019 Tenda w311r Manual
18/79
-
8/10/2019 Tenda w311r Manual
19/79
11N Wireless Broadband Router
Chapter )uic* Setup +uide
This chapter deals with how to access the !nternet
;uickly. 1lease follow this guide to connect your
$outer to the !nternet.
2.# Setup izard
Iere is the 9elcome to Setup izard: for configuring
your $outer ;uickly. Click 9'e8t:.
!n this screen, select one mode of your !nternet
connection you use. !f you are not clear, press the
95etect: button or contact your !nternet Service
1rovider, and click 9'e8t:.
16
-
8/10/2019 Tenda w311r Manual
20/79
11N Wireless Broadband Router
A,SL -irtua& ,ia&.up (-ia PPPoE$
*nter the Account and 1assword provided by your !S1,
and click 9'e8t:.
-
8/10/2019 Tenda w311r Manual
21/79
11N Wireless Broadband Router
Static IP
!n this screen, fill the network address informationfrom your !S1 in the !1 Address, Subnet 3ask,
/ateway and 1rimary 5'S server fields and click
9'e8t:.
/or e0amp&e
!S1 provides the following TC1%!1 parameters asfollows
!1 Address #F-.#+.#.-
Subnet 3ask -.-.-.
/ateway #F-.#+.#.#
1rimary 5'S Server #F-.#+.#.-
Alternate 5'S Server --.F.#"2.#""
18
-
8/10/2019 Tenda w311r Manual
22/79
11N Wireless Broadband Router
Click 9Save: to complete the setup wizard. The $outer
will record the settings you made. To activate the
settings, it is recommended to select 9$eboot the
$outer: from 9System Tool: of the left menu. !t is
rebooting now, please wait for a few minutes and 5>
'>T power off it.
Click the 9System Status: in the left menu of the eb0based ?tility to find out the current network and
system information. !f the 9Connection Status: is
9Connected:, Congratulations you on completing the
$outerJs basic settings. Mou are on the !nternet now. !f
you want to configure more, please proceed to the
following e8planations for Advanced Settings.
19
-
8/10/2019 Tenda w311r Manual
23/79
11N Wireless Broadband Router
20
-
8/10/2019 Tenda w311r Manual
24/79
11N Wireless Broadband Router
Chapter 2 Ad3anced Settings
.# LA' Settings
LA' Settings are for the basic TC1%!1 parameters of
LA' ports.
4AC Address The $outerJs physical 3AC
address as seen on your local network, which is
unchangeable.
IP Address The $outerJs LA' !1 addresses 6not
your 1CJs !1 address7. #F-.#+..# is the default
value.
Su5net 4as* !tJs shown the $outerJs subnet
mask for measurement of the network size.-.-.-. is the default value.
I4POR%AN%
>nce you modify the !1 address, you need to
remember it for the eb0based ?tility login ne8t time.
21
-
8/10/2019 Tenda w311r Manual
25/79
11N Wireless Broadband Router
.- A' Settings
After you have selected the !S1 connection type in9Setup izard: and you want to modify the related
settings, here you can modify and configure the
settings in details.
-irtua& ,ia&.up (PPPoE$
Connection 4ode Show your current
connection mode.
Account*nter them provided by your !S1.
Passord*nter them provided by your !S1.
4%6 3a8imum Transmission ?nit. !t is the sizeof largest datagram that can be sent over a
22
-
8/10/2019 Tenda w311r Manual
26/79
-
8/10/2019 Tenda w311r Manual
27/79
11N Wireless Broadband Router
Static IP
!f your connection mode, static !1 is chosen, you can
modify the following addressing information.
IP Address Iere enter the A' !1 address
provided by your !S1.
Su5net 4as* *nter the A' Subnet 3ask
here.
+ateay*nter the A' /ateway here.
Primary ,NS Ser3er *nter the 1rimary 5'Sserver provided by your !S1.
Secondary ,NS Ser3er *nter the secondary
5'S.
24
-
8/10/2019 Tenda w311r Manual
28/79
11N Wireless Broadband Router
." 3AC Address Clone
This page is for the $outerJs 3AC address to A'.
Some !S1s re;uire end0userNs 3AC address to access
their network. This feature copies the 3AC address of
your network device to the $outer.
4AC AddressThe 3AC address to be registered
with your !nternet service provider.
C&one 4AC Address $egister your 1CNs 3AC
address.
Restore ,e7au&t 4AC Address $estore to the
default hardware 3AC address.
25
-
8/10/2019 Tenda w311r Manual
29/79
11N Wireless Broadband Router
.2 5'S Settings
5'S is short for 5omain 'ame System 6or Service7,an !nternet service that translate domain names into
!1 addresses which are provided by your !nternet
Service 1rovider. 1lease consult your !nternet Service
1rovider for details if you do not have them.
,NS Click the checkbo8 to enable the 5'S
server. The $outerJs 5IC1 sever will answer the
clientJs re;uests and distribute 5'S address.
Primary ,NS Address *nter the necessary
address provided by your !S1.
Secondary ,NS Address *nter the second
address if your !S1 provides, which is optional.
Notice
After the settings are completed, reboot the
device to activate the modified settings.
26
-
8/10/2019 Tenda w311r Manual
30/79
11N Wireless Broadband Router
Chapter 8 Wire&ess Settings
.# (asic Settings
Ena5&e Wire&essCheck to enable the $outerJs
wireless featuresE uncheck to disable it. Mou can
also press the LA'%1S button to turn on%off
the wireless function.
Netor* 4ode Select one mode from the
following. The default is ##b%g%n mode.
115 mode Allow the wireless client to connect
27
-
8/10/2019 Tenda w311r Manual
31/79
11N Wireless Broadband Router
with the device in ##b mode at the
ma8imum speed of ##3bps.
11g mode Allow the ##g%##n0compliant client
device to connect with the A1 at
the ma8imum speed of 23bps.
1159g mode Allow the ##b%g0compliant client
device to connect with the A1 with
auto0negotiation speed, and ##n
wireless client to connect the
device with ##g speed.
1159g9n modeAllow ##b%g%n0compliant client
device to connect with the A1 with
auto0negotiation speed.
4ain SSI,SS!5 6Service Set !dentifier7 is theuni;ue name of the wireless network. This device
has two SS!5 and the main SS!5 is necessary.
:roadcast (SSI,$ Select 9*nable: to enable the
deviceNs SS!5 to be visible by wireless clients.
The default is enabled.
:SSI, (asic Service Set !dentifier of wireless
network. !n !***+-.##, (SS!5 is the 3AC
address of wireless access point.
Channe& Specify the effective channel 6from # to
#"OAuto7 of the wireless network.
E0tension Channe&To increase data throughput
of wireless network, the e8tension channel range
is used in ##n mode.
28
-
8/10/2019 Tenda w311r Manual
32/79
11N Wireless Broadband Router
Channe& :andidthSelect the channel
bandwidth to improve the wireless performance.
hen the network has ##b%g and ##n clients, you
can select the 23E when it is an ##n network,
select -%23 to improve its throughput.
.- ireless Security Settings
!t is used to configure the A1 networkJs security
setting. Iere presents the common si8 6ten in all7
encryption methods, including 3i8ed *1, 1A0
personal, 1A0enterprise, 1A-0personal, 1A-0
enterprise, etc.
.-.# 3i8ed *1
*1 6ired *;uivalent 1rivacy7, a basic encryption
method, usually encrypts wireless data using a series
of digital keys 62 bits or #-+ bits in length7. (y using
the same keys on each of your wireless network
devices, you can prevent unauthorized wireless
devices from monitoring your transmissions or using
your wireless resources. Select 3i8ed *1 to enter
the following window
29
-
8/10/2019 Tenda w311r Manual
33/79
11N Wireless Broadband Router
Se&ect SSI,Select the SS!5 6main SS!5 or
minor SS!57 to configure security setting from
the drop0down menu.
Security 4ode
-
8/10/2019 Tenda w311r Manual
34/79
11N Wireless Broadband Router
.-.- 1A01ersonal
1A 6i0
-
8/10/2019 Tenda w311r Manual
35/79
11N Wireless Broadband Router
.-." 1A-0 1ersonal
1A- 6i0
-
8/10/2019 Tenda w311r Manual
36/79
11N Wireless Broadband Router
." Advanced Settings
This section is to configure the advanced wireless
setting of the $outer, including the $adio 1reamble,
+-.##g%n $ate,
-
8/10/2019 Tenda w311r Manual
37/79
11N Wireless Broadband Router
threshold defines the ma8imum transmission
packet size in bytes. The packet will be
fragmented if the arrival is bigger than thethreshold setting. The default size is -"2 bytes.
!t is recommended not to modify this value.
R%S %hresho&d $TS stands for 9$e;uest to
Send:. This parameter controls what size data
packet the fre;uency protocol issues to $TS
packet. The default value of the attribute is -"2.!t is recommended not to modify this value in
S>I> environment.
%= Poer Set the output power of wireless
radio. The default value is #.
W44 Capa5&e!t will enhance the data transfer
performance of multimedia data when theyJrebeing transferred over wireless network. !t is
recommended to enable this option.
APS, Capa5&e !t is used for auto power0saved
service. The default is disabled.
34
-
8/10/2019 Tenda w311r Manual
38/79
11N Wireless Broadband Router
.2 1S Settings
1S 6i0
-
8/10/2019 Tenda w311r Manual
39/79
11N Wireless Broadband Router
one second 61ress the button for about one
second and 1S indicator will be blinking for -
minutes, which means the 1S is enabled.5uring the blinking time, you can enable another
device to implement the 1S%1(C negotiation
between them. Two minutes later, the 1S
indicator will be off, which means the 1S
connection is completed. !f more clients are
added, repeat the above steps. At present, the1S supports up to "- clients access.7
PIN!f this option is enabled, you need to enter
a wireless clientJs 1!' code in the field and keep
the same code in the 1S client.
WPS SummaryShow the current state of i0 4ode The authorization mode
deployed by 1S, generally 1A%1A-0personal
36
-
8/10/2019 Tenda w311r Manual
40/79
-
8/10/2019 Tenda w311r Manual
41/79
11N Wireless Broadband Router
(SS!5 to establish the connection.
:ridge Mou can wirelessly connect two or more wired
networks via this mode. !n this mode, you need to add
the ireless 3AC address of the connecting device
into the $outerNs A1 3AC address table or select one
from the scanning table.
Repeater 4ode!n this mode, add the opposing 3AC
address into each own A1 3AC address table by
manual or scanner to enlarge and e8tend the wireless
radio.
Encrypt %ype Select one from *1, TK!1, A*S for
security here.
Pass phrase *nter the encrypted key for wireless
devices.AP 4AC !nput the 3AC address of another
6opposing7 wireless router you want to connect.
NO%E
!t is recommended that two wireless routers keep
the same bandwidth, channel number, and
security settings. Apply the settings and reboot
the $outer to activate it.
38
-
8/10/2019 Tenda w311r Manual
42/79
-
8/10/2019 Tenda w311r Manual
43/79
11N Wireless Broadband Router
.H Connection Status
This page shows wireless clientJs connection status,
including 3AC address, Channel bandwidth, etc. Select
9ireless Setting0connection status: to enter the
following screen
4AC AddressShows current 3AC addresses of
the hosts connecting to the $outer.
:andidth Shows current bandwidth of the
hosts 6wireless client7.
40
-
8/10/2019 Tenda w311r Manual
44/79
11N Wireless Broadband Router
Chapter @ ,'CP Ser3er
H.# 5IC1 Settings
5IC1 65ynamic Iost Control 1rotocol7 is to assign an
!1 address to the computers on the LA'%private
network. hen you enable the 5IC1 Server, the 5IC1
Server will allocate automatically an unused !1
address from the !1 address pool to the re;uesting
computer in premise of activating 9>btain an !1
Address Automatically:. So specifying the starting and
ending address of the !1 Address pool is needed.
,'CP Ser3er Activate the checkbo8 toenable 5IC1 server.
IP Address Start9End *nter the range of !1
address for 5IC1 server distribution.
Lease %ime The length of the !1 address lease.
/or e0amp&e
!f the lease time is an hour, then 5IC1 server will
reclaim the !1 address each hour.
41
-
8/10/2019 Tenda w311r Manual
45/79
11N Wireless Broadband Router
H.- 5IC1 List and (inding
The Static !1 assignment is to add a specifically static
!1 address to the assigned 3AC address. Mou can view
the related information in the 5IC1 server list.
IP Address *nter the !1 address which needs to
be bound.
4AC Address *nter the 3AC address of the
computer you want to assign the above !1
address. Click 9Add: to add the entry in the list.
'ostname The name of the computer which is
added a new !1 address.
Lease %ime The left time length of the
corresponding !1 address lease.
42
-
8/10/2019 Tenda w311r Manual
46/79
11N Wireless Broadband Router
43
-
8/10/2019 Tenda w311r Manual
47/79
11N Wireless Broadband Router
Chapter -irtua& Ser3er
+.# 1ort $ange
-
8/10/2019 Tenda w311r Manual
48/79
11N Wireless Broadband Router
IP Address *nter the !1 address of the 1C
where you want to set the applications.
Protoco& Select the protocol 6TC1%?51%(oth7 for
the application.
,e&ete9Ena5&e Click to check it for
corresponding operation.
We&&.;non Ser3ice Port Select the well0
known services as 5'S,
-
8/10/2019 Tenda w311r Manual
49/79
-
8/10/2019 Tenda w311r Manual
50/79
11N Wireless Broadband Router
installed software that supports ?1n1. ith the ?1n1
function, host in LA' can re;uest the router to process
some special port switching so as to enable hostoutside to visit the resources in the internal host.
Ena5&e 6PnPClick the checkbo8 to enable the
?1n1.
47
-
8/10/2019 Tenda w311r Manual
51/79
11N Wireless Broadband Router
Chapter %ra77ic Contro&
F.# Traffic Control
Traffic control is used to limit communication speed in
the LA' and A'. ?p to - entries can be supported
with the capability for at most -2 1CsN speed control,
including for !1 address range configuration.
Ena5&e %ra77ic Contro& To enable or disable the
internal !1 bandwidth control. The default is
disabled.
Inter7ace To limit the uploading and
downloading bandwidth in A' port.
Ser3ice To select the controlled service type,
48
-
8/10/2019 Tenda w311r Manual
52/79
11N Wireless Broadband Router
such as ITT1 service.
IP Starting Address The first !1 address for
traffic control.
IP Ending Address The last !1 address for
traffic control.
6p&oading9,on&oading To specify the traffic
heading way for the selected !1 addresses
uploading or downloading.
:andidth To specify the
uploading%downloading 3in. %3a8. Traffic speed
6K(%s7, which can not e8ceed the A' speed.
App&y To enable the current editing rule. !f not,
the rule will be disabled.
AddAfter edit the rule, click the 9add to list:button to add the current rule to rule list.
App&y Click 9Save: to activate the current rule.
Cance& Click 9Cancel: to drop all setting saved
last time.
49
-
8/10/2019 Tenda w311r Manual
53/79
11N Wireless Broadband Router
Chapter 1D Security Settings
#.# Client
-
8/10/2019 Tenda w311r Manual
54/79
11N Wireless Broadband Router
/i&ter 4odeClick one radio button to enable or
disable to access the !nternet.
Po&icy Name*nter a name for the access policy
selected.
IP Start9End *nter the starting%ending !1
address.
Port No *nter the port range based over the
protocol for access policy.
Protoco& Select one protocol 6TC1%?51%(oth7
from the drop0down menu.
%imesSelect the time range of client filter.
,ate Select the day6s7 to run the access policy.
/or e0amp&e!f you donJt want the designated computer at !1
address of #F-.#+..# to visit website from +
to#+ everyday without restriction to other
computers, you need to set it as above.
51
-
8/10/2019 Tenda w311r Manual
55/79
11N Wireless Broadband Router
#.- ?$L
-
8/10/2019 Tenda w311r Manual
56/79
11N Wireless Broadband Router
disable to access the !nternet.
Po&icy Name*nter a name for the access policy
selected. Start9End IP *nter the starting%ending !1
address.
6RL Strings Specify the te8t strings or
keywords needed to be filtered. !f any part of
the ?$L contains these strings or words, the web
page will not be accessible and displayed.
%imes Select the time range of client filter.
,ate Select the day6s7 to run the access policy.
Sa3eClick 9Save: to activate the configuration.
/or e0amp&e
!f you donJt want the computer at !1 address of
#F-.#+..## to visit the website contained 9se8: and9game:, you need to set it as above.
53
-
8/10/2019 Tenda w311r Manual
57/79
11N Wireless Broadband Router
#." 3AC Address
-
8/10/2019 Tenda w311r Manual
58/79
11N Wireless Broadband Router
4AC Address*nter the 3AC address you want
to run the access policy.
%imesSelect the time range of client filter.
,ate Select the day6s7 to run the access policy.
App&yClick to make the settings go into effect.
/or e0amp&e
!f you want to configure the host with 3AC
address CF
-
8/10/2019 Tenda w311r Manual
59/79
11N Wireless Broadband Router
Pre3ent Netor* Attac*Check to enable it for
attack prevention.
#. $emote eb 3anagement
This section is to allow the network administrator to
manage the $outer remotely. !f you want to access
the $outer from outside the local network, please
select the 9*nable:.
Ena5&e Check to enable remote web
management.
Port The management port open to outside
access. The default value is +.
WAN IP AddressSpecify the range of the A'
!1 address for remote management.
Note
#. !f you want to login the deviceJs eb0based
interface via port ++, you need use the format
of A' !1 address port 6for e8ample
http%%-#F.#"2."-.## ++7 to implement
remote login.
56
-
8/10/2019 Tenda w311r Manual
60/79
11N Wireless Broadband Router
57
-
8/10/2019 Tenda w311r Manual
61/79
11N Wireless Broadband Router
-. !f your A' !1 address starts and ends with
..., it means all hosts in A' can implement
remote eb management. !f you change theA' !1 address as -#+.++.F".""0-#+.++.F".",
then only the !1 addresses as -#+.++.F"."",
-#+.++.F"."2 and -#+.++.F"." can access the
$outer.
/or e0amp&e!f you want to configure the !1 address -#+.++.F".""
to access the deviceJs web interface, please set it as
above.
#. A' 1ing
The ping test is to check the status of your internet
connection. hen disabling the test, the system will
ignore the ping test from A'.
Ignore Ping 7rom WAN
Check to ignore the ping re;uest and give no
reply.
58
-
8/10/2019 Tenda w311r Manual
62/79
11N Wireless Broadband Router
59
-
8/10/2019 Tenda w311r Manual
63/79
11N Wireless Broadband Router
Chapter 11 Routing Settings
##.# $outing Table
The main duty for a router is to look for a best path
for every data frame, and transfer this data frame to a
destination. So, itJs essential for the router to choose
the best path, i.e. routing arithmetic. !n order to finish
this function, many transferring paths, i.e. routing
table, are saved in the router, for choosing when
needed.
60
-
8/10/2019 Tenda w311r Manual
64/79
11N Wireless Broadband Router
Chapter 1# System %oo&s
#-.# Time Settings
This section is to select the time zone for your
location. !f you turn off the $outer, the settings for
time disappear. Iowever, the $outer will automatically
obtain the /3T time again once it has access to the
!nternet.
%ime BoneSelect your time zone from the drop0
down menu.
Customi?ed time*nter the time you customize.
Note
hen the $outer is powered off, the time setting
will be lost. (efore the $outer will obtain /3T
time automatically, you need connect with the
!nternet and obtain the /3T time, or set the time
on this page first. Then the time in other features
61
-
8/10/2019 Tenda w311r Manual
65/79
11N Wireless Broadband Router
6e.g. firewall7 can be activated.
#-.- 55'S
The 55'S 65ynamic 5omain 'ame System7 is
supported in this $outer. !t is to assign a fi8ed host
and domain name to a dynamic !nternet !1 address,
which is used to monitor hosting website,
-
8/10/2019 Tenda w311r Manual
66/79
-
8/10/2019 Tenda w311r Manual
67/79
-
8/10/2019 Tenda w311r Manual
68/79
11N Wireless Broadband Router
Restore Setting
Click 9(rowse: button to select the backup files.
Click 9$estore: button to restore previous
settings.
65
-
8/10/2019 Tenda w311r Manual
69/79
11N Wireless Broadband Router
#-.2 $estore to
-
8/10/2019 Tenda w311r Manual
70/79
11N Wireless Broadband Router
#-. ?pgrade
-
8/10/2019 Tenda w311r Manual
71/79
11N Wireless Broadband Router
Re5oot the routerClick this button to reboot the
device.
#-.H 1assword Change
This section is to set a new user name and password
to better secure your router and network.
6ser Name *nter a new user name for the
device.
O&d Passord *nter the old password.
Ne Passord *nter a new password.
Re.enter to Con7irm $e0enter to confirm the
new password.
NO%E
!t is highly recommended to change the password
to secure your network and the $outer.
68
-
8/10/2019 Tenda w311r Manual
72/79
11N Wireless Broadband Router
#-.+ Syslog
The section is to view the system log. Click the
9$efresh: to update the log. Click 9Clear: to clear all
shown information. !f the log is over # records, it
will clear them automatically.
Re7reshClick this button to update the log.
C&ear Click this button to clear the currentshown log.
69
-
8/10/2019 Tenda w311r Manual
73/79
11N Wireless Broadband Router
#-.F Logout
After you have finished the settings completely, in
logout page click 9Mes: to logout the web management
page.
70
-
8/10/2019 Tenda w311r Manual
74/79
11N Wireless Broadband Router
Appendi0 1 +&ossary
Channe&
An instance of medium use for the purpose of passing
protocol data units 615?s7 that may be used
simultaneously, in the same volume of space, with
other instances of medium use6on other channels7 by
other instances of the same physical layer 61IM7,with
an acceptably low frame error ratio6
-
8/10/2019 Tenda w311r Manual
75/79
11N Wireless Broadband Router
Conversely, #2 and #-+ bit are the same. *1 uses
a common K*M to encode the data. Therefore, all
devices on a wireless network must use the same key
and same type of encryption. There are - methods
for entering the K*ME one is to enter a #0bit I*@
digit. ?sing this method, users must enter a #0digit
number 6for 20bit7 or -0digit number 6for #-+0bit7 in
the K*M field. ?sers must select the same key
number for all devices. The other method is to enter
a te8t and let the computer generate the *1 key for
you. Iowever, since each product use different
method for key generation, it might not work for
different products. Therefore, it is '>T recommended
using.
WPA9WPA# Encryption
A security protocol for wireless networks that builds
on the basic foundations of *1. !t secures wireless
data transmission by using a key similar to *1, but
the added strength of 1A is that the key changes
dynamically. The changing key makes it much more
difficult for a hacker to learn the key and gain access
to the network.1A- is the second generation of 1A
security and provides a stronger encryption
mechanism through Advanced *ncryption Standard
6A*S7, which is a re;uirement for some government
users.
72
-
8/10/2019 Tenda w311r Manual
76/79
11N Wireless Broadband Router
Appendi0 # )uestions and Ansers
!n this part some ;uestions and problems shown
during the $outerJs usage and installation will be given
suggesting answers. !f your problems are not in the
list, please log into our website www.tenda.cnor send
an *0mail to supportmicrodata.fi, and we will reply
you in the first time.
#. Can not login to the eb interface of the $outer
after you enter the !1 address in the address fieldU
Step # check the $outer if it works well. >nce the
device is powered on for a few seconds, the SMSindicator on the panel will be turned on. !f it is not,
please contact us.
Step - check the network cables if it is good and the
corresponding indicator is 9Always >':. Sometimes,
the indicator is 9Always >':, but it does not mean it
gets through.
$un 91ing: command and check if it can ping the
$outerJs LA' !1 address #F-.#+..#. !f it is >K,
please make sure your browser does not access the
!nternet by pro8y server. !f the ping fails, you can
press the 9$*S*T: button for H seconds to restore to
73
http://www.tenda.cn/http://www.tenda.cn/mailto:support@tenda.cnhttp://www.tenda.cn/mailto:support@tenda.cn -
8/10/2019 Tenda w311r Manual
77/79
11N Wireless Broadband Router
default settings. And then repeat the ping operation. !f
it still does not work, please contact us.
-.
-
8/10/2019 Tenda w311r Manual
78/79
11N Wireless Broadband Router
.Iow can ! configure and access the !nternet via
5ynamic !1U
!n Setup izard of the eb utility interface, select
95ynamic !1: connection type and click 9Save: to
activate it. As some !S1s bind the user computerJs
3AC address, you need to clone the $outerJs A'
3AC address to the bind-#ing 1CJs 3AC address.
Select 93AC Address Clone: in 9Advanced Setting: to
input your computerJs 3AC address and click 9Apply:
to activate it.
.Iow to share my computerJs source with other users
in !nternetU
!f you want !nternet users to access the internal
server via the $outer such as e0mail server, eb,
-
8/10/2019 Tenda w311r Manual
79/79
11N Wireless Broadband Router
e8ample, +.
Step !nput the internal serverJs !1 address. !f your
eb serverJs !1 address is #F-.#+..#, please input
it.
Step select the communication protocol used by
your internal host TC1, ?51, !C31.
Step H click 9Apply: to activate the settings.
The following table has listed the well0known
application and service port
Server 1rotocol Service 1ort
*( Server TC1 +
top related