technology problemswithundercuts? … european tool & mould making n january/february 2010 ...
Post on 21-Mar-2018
213 Views
Preview:
TRANSCRIPT
28 European Tool & Mould Making n January/February 2010 www.etmm-online.com
Technology
Machining robots are growing in mar-ket demand owing to their attractive-ness to manufacturing companies looking for a time- and money-saving alternative to CNC machine tools. With the reach a 6-axis robot offers, many parts can be machined by a ro-bot in a single setup that would require multiple setups if a CNC machine were used. A robot placed on rails or set up to work with rotary tables of-fers even greater reach and flexibility in the production of large aircraft, ship and power-generation parts.
Robotmaster® software for pro-gramming 6-axis robots provides the same flexibility and speed as software used for programming CNC machine tools because it seamlessly integrates robot programming, simulation and code generation inside Mastercam®’s industry-proven CAD/CAM platform. Developed by Jabez Technologies, a company that specializes in dedicated software solutions for industrial auto-mation, manufacturing and robotics, Robotmaster is, like CNC Software’s Mastercam, distributed in Europe by InterCAM S.A.
As robots have become more rigid and capable of providing higher ac-curacy in machining harder materi-als, more companies have considered
Dedicated Robotics Software Allows a Machining Robot to Be Programmed Just Like a CNC Machine Tool
using them as a machining tool. But a major challenge those companies have faced has been the lack of an integrated CAD/CAM robot program-ming solution. Typical commercial solutions have involved multiple soft-ware components, for programming, for postprocessing and for simulation. This arrangement limits programming flexibility, and successful program-ming of the part requires a greater level of user intervention along with advanced knowledge of the robot.
Robotmaster, however, is designed to facilitate both the programming of precise tool motion and the generation of long tool-path trajectories (some of which are impossible to teach via on-line methods). The requirement for programmer intervention is minimal: in fact, the programming effort takes minutes rather than days.
The 3- to 5-axis machining of com-plex parts can easily be programmed using Robotmaster. Traditional robotic applications such as trimming, de-burring, polishing, dispensing, grind-ing and painting also are supported by Robotmaster. The software works with robots carrying such major brand names as Stäubli, KUKA, ABB, Fanuc, Motoman and Mitsubishi.
The Robotmaster software envi-ronment is easy to use for optimizing robot programmes. Paths are verified for errors (problem areas being dis-played graphically) and, with a few mouse clicks, are easily optimized for singularities, joint limits, robot reach and collisions even before the path is verified in the simulator. After the
InterCAM S.A.Morges, switzerlandwww.intercamsa.com
simulation and verification process is complete, the user can output robot-ready operational code from the fully integrated Robotmaster solution.
Using all of the CAD/CAM tools available in Mastercam, Robotmaster provides a direct link from the CAD model to the tool path, as well as file tracking and change recognition for engineering change management. The software supports machining both with the tool mounted on the robot and with the part mounted on the robot. In addition, Robotmaster ac-commodates applications involving programming a robot mounted on up to three rails and a part mounted on two rotary tables, for a total of 11 axes simultaneously.
EJECTOR STROKE LIMITERS
FLEXIBLE CORES
ANGULAR LIFTER
PROBLEMS WITH UNDERCUTS?
WE CAN GIVE YOU THE BEST SOLUTION
With ejector bore
INNOVATIVE SOLUTIONS FOR MOLDS
Check www.cumsa.com for your official dealer!
Jun
e-
20
09
Un
de
rcu
tsso
luti
on
s
sin
gle
un
de
rcu
t
do
ub
leu
nd
erc
ut
36
0º
un
de
rcu
t
VERTICAL LIFTERS
- Back to back clips.
- Limited space.
- Thread forms.
- Angled surfaces.
- Multidirectional negatives.
- Double clips.
- Single clips.
- Compound angles.
we’ll find a !solutionTell us your problem,
the following problems:
We have solutions to
top related