taking your network cabling infrastructure to 40/100g ethernet

Josh Taylor Senior Product Manager CABLExpress jtaylor@cablexpress.com

Josh Taylor Senior Product Manager

Taking Your Network Cabling

Infrastructure to 40/100G Ethernet

• Introduction • Presentation by Josh Taylor,

Senior Product Manager at CABLExpress

• Q&A • Win prizes from CABLExpress! • Save-the-date: July webinar

Josh Taylor Senior Product Manager

Today’s Agenda

To receive one BICSI Continuing Education Credit (CEC) for certifications in RCDD, RITP, DCDC, NTS, Installer 2 Copper/Fiber, Technician and Certified Trainer, please fill out the form provided.

Josh Taylor Senior Product Manager

BICSI Credits

• Why the shift to 40 and 100G Ethernet is happening • The factors you need to consider when planning your cabling

infrastructure • Best practices for migrating to 40 and 100G Ethernet • Next steps for data centers

Josh Taylor Senior Product Manager

What You’ll Learn:

With the ratification of new industry standards and increased demands on data center throughput, 40/100G Ethernet will be an integral component of the next generation data center.

Josh Taylor Senior Product Manager

Introduction

Josh Taylor Senior Product Manager

Why are data centers migrating to 40/100G Ethernet?

The world revolves around digital data. According to The 2011 IDC Digital Universe Study sponsored by EMC:

“The world’s information is doubling every two years. In 2011 the world will create a staggering 1.8 zettabytes. By 2020 the world will generate 50 times the amount of information and 75 times the number of ‘information containers’ while IT staff to manage it will grow less than 1.5 times.”

(1,000,000,000,000,000,000,000 bytes = 10007 bytes = 1021 bytes)

Josh Taylor Senior Product Manager

Why are data centers migrating to 40/100G Ethernet?

Virtualization: the double-edged sword. Server virtualization calls for fewer, more efficient servers, which translates to fewer server connections. And because there are fewer connections, is it important that these connections work properly.

Josh Taylor Senior Product Manager

Why are data centers migrating to 40/100G Ethernet?

Decreasing tolerance for downtime. Network downtime measured for user experience and business needs costs an average of $5,600 per minute.

Josh Taylor Senior Product Manager

Why are data centers migrating to 40/100G Ethernet?

Managing capital expenses. While migrating to 40/100G Ethernet creates an up-front capital expense, it saves data centers in the long run by future-proofing infrastructure. Meaning: upgrading now will mean fewer upgrades in the future.

Josh Taylor Senior Product Manager

Why are data centers migrating to 40/100G Ethernet?

A change in data center cabling standards. In 2010, the Institute of Electrical and Electronics Engineers (IEEE) published the standard for migrating to 40/100G Ethernet. The standard, titled 802.3ba, sent a clear message to data center operators and manufacturers alike that the road to 100G was imminent, and the industry needed to start preparing for this migration as soon as possible.

Josh Taylor Senior Product Manager

Why are data centers migrating to 40/100G Ethernet?

Josh Taylor Senior Product Manager

Factors in preparing for 40/100G Ethernet migration

Link Distances and Loss Amounts: loss budgets decrease when data center speeds increase • Added mating points are the main reason for dB loss in the data center (not distance) • Look for “maximum” instead of “average” dB loss rates when purchasing cables to minimize dB loss over mating points

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

• Cabling Infrastructure

Design • Point-to-point versus

structured cabling system • Structured cabling system

can grow and move as data center needs change and throughput demands increase

• TIA-942 data center standard is recommended

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

• Connectivity Options: Option 1

• Uses long-haul (LX) transceivers with single-mode (SM) cabling

• Data is transmitted via serial transmission • This setup is typically not used in data centers

• Built for long distances • Very expensive because of the lasers used in LX

transceivers

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

• Connectivity Options: Option 2

• Uses short-haul (SX) transceivers with multi-mode (MM) cabling

• Data is transmitted via parallel optic transmission • This setup is typically used in data centers

• Ideal for shorter distances • More cost effective

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

• Connector Types

• LC connector • MPO-style connector

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

• Fiber Types – OM3 or OM4

Josh Taylor Senior Product Manager

Factors in Preparing for 40/100G Ethernet Migration

Josh Taylor Senior Product Manager

What About Copper?

• Consider: • Costs • Transmission • External Interference

• Conclusion: copper cabling is better for the edge of the network

Josh Taylor Senior Product Manager

Conclusion Data centers are experiencing the most significant

change in cabling infrastructure since the introduction of fiber optic cabling. No longer is it a question of if, but when, data centers will migrate to 40/100G Ethernet. Installing a high-performance, fiber optic structured cabling system is essential to a successful migration.

Josh Taylor Senior Product Manager

Next Steps 1. Determine your current and future data center needs, including

throughput demand, data production rates and business-driven objectives. In what ways does your current data center infrastructure support and/or fail those needs?

2. Use this information to determine when your data center should migrate to 40/100G Ethernet.

3. Map out your current data center infrastructure. 4. Use this map to create a plan for the hardware and cabling

infrastructure upgrades necessary for migration. 5. Create a plan for migration, including internal communication strategy,

budget, timeline and roles and responsibilities of those involved.

Josh Taylor Senior Product Manager

Next Steps • Education is key!

• Download the complete white paper “Taking Your Network to 40/100G Ethernet” at www.cablexpress.com

Josh Taylor Senior Product Manager

Win a pizza party from CABLExpress! Submit a picture of your cabling infrastructure to

http://www.cablexpress.com/land/do-you-respect-layer-one/ to win!

Josh Taylor Senior Product Manager

Attend Our Next Webinar

• Save the date: our next webinar will be Thursday,

June 28 from 2:00 – 3:00 PM EST • Engineering Manager Kent Goldsmith will talk

about dB loss and how it affects your data center performance.

• Email invitation coming soon, or keep an eye out for a link at www.cablexpress.com/webinars.

Josh Taylor Senior Product Manager

Questions?

Josh Taylor Senior Product Manager

Thank You!

Josh Taylor Senior Product Manager CABLExpress jtaylor@cablexpress.com