taking the fear out of osha for business aviation - … of osha for business aviation ... • give...
Post on 21-May-2018
221 Views
Preview:
TRANSCRIPT
Taking the FearOut of OSHA forBusiness Aviation
Andreas Bentz, Chantilly Air, Inc.
Las Vegas, NV | October 10, 2011
Limitations on Andreas’s Liability
• … I still had someone drink Jet-A/fall into the fuel tank/etc.
– OSHA realizes that there is unpreventable employee misconduct:
• Establish policy.
• Train when and where to follow the rule.
• Have and use a disciplinary program.
• Periodically inspect.
• … I still got cited by OSHA.
– Andreas does not work for OSHA.
• Andreas is telling you about his experience with OSHA.
• Andreas has had the OSHA 30-hour training.
• Nothing is Andreas’s fault (or Chantilly Air’s, or NBAA’s).
2
Hey, so I did what you said I should do, but …
Mission Statement
• Put the fear of OSHA in you.
– Never mind the catchy title. There’s (almost) no way around OSHA.
• Show you how easy compliance with OSHA standards is.
– OSHA makes FAA look good: outcome-based standards.
• Help you identify the major OSHA standards.
– There are not many.
• Give you some useful tips for OSHA compliance.
– Actually, useful and cheap.
3
What good will this session do me?
Occupational Safety and Health
4
Why care? … and some general things.
OSHA Requirements
• IS-BAO (2011) Standard 13.0 Occupational Health and Safety
– “An operator is responsible for identifying and complying with allnational and local occupational health and safety laws andrequirements …”
• Certified Aviation Manager
– Questions on the CAM exam. (No, I can’t tell you which ones.)
• It’s the law!
– OSH Act (1970)
– OSHA standards apply to private sector (and, since 1980, federal)employers with one or more employees.
• Are state employers off the hook? Not if there is a state OSHA.
5
Why worry about OSHA?
Regulations
• 29 CFR 1903 requires display ofthe “Job Safety and Health – It’sthe Law” poster.
– Download and print .
• Size: at least 8½” x 14”.
– Order from OSHA.
– Do you need a state OSHAposter?
• Inform employees about OSHA.
• Make OSHA standards availableto employees.
6
A Quick Look at 29 CFR 1903, 1904, 1910
http://osha.gov/Publications/osha3165.pdf
Regulations
• 29 CFR 1904 requires certain record-keeping (more later).
7
A Quick Look at 29 CFR 1903, 1904, 1910
Regulations
• 29 CFR 1910 is the standard for General Industry.
– There are others: Construction (1926), Shipyards (1915), etc.
• Exactly what industry are we in?
– North American Industry Classification System (NAICS). Examples:
• 481211 Nonscheduled air passenger transportation
– Old Standard Industrial Classification (SIC) code 4522.
• 488190 Other Support Activities for Air Transportation
– Old SIC code 4581.
– Why care?
• Data and statistics: most frequent injuries, most frequently citedviolations.
8
A Quick Look at 29 CFR 1903, 1904, 1910
http://www.census.gov/eos/www/naics/index.htmlhttp://www.osha.gov/oshstats/index.html
OSHA Standards
9
A quick tour
Walking-Working Surfaces
• Slips, Trips, and Falls:
– In 2010, in NAICS “SupportActivities for Air Transportation”,there were 14 fatalities … of whichthree were falls.
• Good housekeeping: clean, dryfloors, clear passageways.
10
Subpart B (1910.21 – 1910.30)
Walking-Working Surfaces
• Open-sided floors 4 feet or higher must have fall protection:
– Rail (top rail 42” above floor; mid rail 21” above floor).
– Personal fall arrest system (proposed rule).
• Ladder safety (number one cause of fatalities in construction):
– Standards (e.g. rated for single-user, 200 lbs: Type 1 or 1A).
– Good idea: training (4-to-1 rule, belt-buckle rule, etc.).
11
Subpart B (1910.21 – 1910.30)
Exit Routes and Emergency Planning
• Exit routes consist of:
– Exit access …
• Unobstructed.
• Lighted.
• Minimum width 28”, some building codes require more.
– … which lead to an exit …
• Unlocked (except mental, penal, correctional facilities).
• Illuminated “EXIT” sign, min. 6” letters).
– … which leads to an exit discharge.
• Must lead directly outside.
• If you comply with NFPA 101-2000, you’re covered!
12
Subpart E (1910.33 – 1910.39)
Exit Routes and Emergency Planning
• Emergency Action Plan.
– You must have one. (If you have an SMS, you probably already do.)
• If you have 10 or fewer employees, it need not be written.
– Elements:
• Reporting a fire or other emergency (toxic chemical releases,hurricanes, tornadoes, blizzards, floods, etc.)
• Emergency evacuation (floor plans, maps) or shelter in place.
• Critical plant operations (if you have any).
• Accounting for all employees after evacuation.
• Procedures for employees performing rescue or medical duties.
• Contact details for information about the plan.
• Remember: training!
13
Subpart E (1910.33 – 1910.39)
Fire Protection
• Portable fire extinguishers:
– Appropriate to the class of fire:
• A – solids, B – liquids, C – electrical, D – metals.
14
Subpart L (1910.155 – 1910.165)
– Maintained and inspected:
• Monthly visual inspection– anybody can.
– Mounted, unobstructed? (30 inchesclear space).
– Charged, pin safety-wired, and …shake it, baby!
– Document.
• Annual maintenance.
• Hydrostatic testing depending on agent.
Medical and First Aid
• If serious work-related injuries are possible, you must be able toprovide first aid within 3 – 4 minutes.
– Why the timeframe? Brain death.
– Exception: workplaces where serious work-related injuries areunlikely (e.g. office): 15 minutes.
• In most cases this means you need to have employees trained infirst aid and CPR on site any time work is being done.
– This now means that you have employees who have anoccupational exposure to potential bloodborne pathogens. More onbloodborne pathogens later (requires written program).
– Training: initial and recurrent (two-year requirement).
15
Subpart K (1910.151)
Medical and First Aid
• If there is the possibility of exposure to corrosive materials, youalso need a means of flushing skin or eyes, for a minimum of 15minutes (at 30 psi).
– Emergency shower.
– Eyewash station.
• Check these annually, activate them weekly (ANSI Z358.1).
16
Subpart K (1910.151)
Toxic and Hazardous Substances
• Bloodborne Pathogens (occupational exposure to blood or otherpotentially infectious materials).
– Hepatitis B (30%), Hepatitis C (3-5%), HIV (0.03%).
• What about lav service?
– Bloodborne pathogens exposure control plan. (You must have one.)
– Training: annual recurrent training (by “qualified” trainer).
– Invest in some PPE: gloves, gowns, masks, eye-protection,resuscitation devices; biohazard bags.
– You must offer free Hepatitis B vaccinations to employees.
• They may decline – get a signed Hepatitis B VaccinationDeclination Statement (1910.1030 Appendix A).
17
Subpart Z (1910.1000 – 1910.1450)
Toxic and Hazardous Substances
• Written hazard communication program (“worker right to know”).
– You must have one. (OSHA tips in Appendix E of the standard.)
– Hazardous chemical inventory.
• Keep for duration of employment plus 30 years.
– Labels and warnings (substance identity and hazard warnings).
• Exception: portable secondary containers for immediate use bythe employee who performs the transfer.
• Labels must not be defaced.
– Material Safety Data Sheets (MSDSs).
• Must be readily accessible (no barriers to immediate access).
– Information about hazardous substances and training.
18
Subpart Z (1910.1000 – 1910.1450)
Occup. Health/Environmental Control
• Noise exposure.
– 8-hour time-weighted average greater than 85 dB(A):
• Hearing conservation program (annual audiometric testing, offerhearing protection, give training)
– 8-hour time-weighted average greater than 90 dB(A):
• Engineering controls or mandatory hearing protection.
• How do you know?
– Noise sampling by your workers’ compensation insurance provider.
• More on hearing protection (personal protective equipment) later.
19
Subpart G (1910.94 – 1910.98)
Occup. Health/Environmental Control
• Examples (noise levels):
– Normal conversation (3-5‘) 70 dB
– Driving Diesel-powered aircraft tug 84 dB
– Sustained exposure may result in hearing loss 90 dB
– Rivet gun on sheet metal 102 dB
– Marshalling Lear 60 105 dB
– Pressurization test equipment (compressor) 110 dB
– Disconnecting GPU from Lear 60 114 dB
– Short term exposure can cause permanent damage 140 dB
20
Subpart G (1910.94 – 1910.98)
Materials Handling and Storage
• Powered Industrial Trucks (PIT).
– Mobile, power-driven (electric or internal combustion engine) vehicleused to carry, push, pull, lift, stack or tier material.
• Mostly OSHA thinks “forklifts” (stability).
– Training and evaluation program. (You must have one.)
• The standard specifies what must be included:
– Truck-specific and workplace-specific topics.
• Refresher training and evaluation when:
– Unsafe.
– Accident/near-miss.
– Differences training (different type of PIT).
– Changes in workplace.
21
Subpart N (1910.176 – 1910.184)
Hazardous Materials
• Compressed gasses:
– Storage: grouped by hazard class (e.g. combustible and oxidizer),upright, secured, in a designated area.
– Other good housekeeping (handling and use).
• Flammable “Class I” (flashpoint below 100F) and combustible“Class II, Class III” (flashpoint above 100F) liquids:
– Containers:
• Maximum allowable container size depends on flammability.
– Storage cabinets:
• Maximum capacity of storage cabinet: 60 gallons (Class I andII), 120 gallons (Class III).
22
Subpart H (1910.101 – 1910.126)
Compressed Gas Association Pamphlet P–1–1965
Machinery and Machine Guarding
• All machinery must be appropriately guarded.
– “Appropriate” – can you reach:
• Around …
• Under …
• Through …
• Over …
– … an existing guard? Then it’s not appropriately guarded.
• The standard has lots of detail.
– Examples.
23
Subpart O (1910.211 – 1910.219)
Machinery and Machine Guarding
• Examples:
– Grinder (“abrasive wheel machinery”):
• Must do a “ring test” of the grinding wheel (check for cracks).
• Tongue guard: 1/4”.
• Work rest: 1/8”.
• Anchored to floor or platform the user stands on.
– Fan blades:
• Maximum opening: 1/8”.
– Check what your employees bring to work!
24
Subpart O (1910.211 – 1910.219)
Electrical
• Electrical equipment must be grounded.
– Check what your employees bring to work!
• Disconnecting means (e.g. circuit breaker)clear space:
– 15 inches either side, 3 feet out from theface of the breaker.
• Flexible cords: check for damage!
• Extension cords:
– Cannot be used as a substitute for fixedwiring (temporary use only).
– Only in continuous lengths.
25
Subpart S (1910.301 – 1910.399)
General Environmental Controls
• Permit-required confined spaces.
– Contains/potential to contain hazardous atmosphere (fuel tank).
– Contains material that has the potential for engulfing an entrant(grain silo);
– Has an internal configuration such that an entrant could be trappedor asphyxiated by inwardly converging walls or by a floor whichslopes downward and tapers to a smaller cross- section; or
– Contains any other recognized serious safety or health hazard.
• If you have permit-required confined spaces, you must have apermit-required confined space program.
– Warning signs, authorize each entry, ventilation, entry attendant, etc.
26
Subpart J (1910.141 – 1910.147)
General Environmental Controls
• Control of hazardous energy (lockout/tagout).
– During maintenance, stored energy (electric, hydraulic, pneumatic)may cause injury if inadvertently activated.
• Includes changing lightbulbs, replacing printer toner cartridges.
– OSHA’s order of preference:
• Lock out the equipment - tag out the equipment.
– You must have a program.
• Cord and plug equipment: turn off, unplug, control of the plug.
• Invest in locks (don’t forget circuit breaker locks).
• Procedures for locking out/tagging out/removing locks.
– Training: authorized, affected, other employees.
27
Subpart J (1910.141 – 1910.147)
Personal Protective Equipment
• PPE Hazard Assessment.
– You must have a written program. If you have an SMS, you probablyalready have the framework for one.
• Assess each job for hazards, determine appropriate PPE.
– For example: MSDS.
• If PPE is required, the employer must provide it, at no cost toemployees.
– Certain exceptions for PPE that can be worn off the job.
– Employer must provide replacement of damaged PPE (exceptloss/intentional damage).
• If employees choose to provide their own PPE, the employer isresponsible for ensuring adequacy and proper maintenance.
28
Subpart I (1910.132 – 1910.138)
Personal Protective Equipment
• You must provide training:
– When and what kind of PPE to wear.
– How to wear (don, doff, adjust) PPE.
– Limitations of PPE.
– Care, maintenance, and disposal of PPE.
• Examples of PPE:
– Eye protection (goggles, spectacles).
– Face protection (face shields – lav service).
– Head protection (hard hats).
– Hearing protection (earmuffs, earplugs).
– Foot, hand, body protection (gloves, etc.)
29
Subpart I (1910.132 – 1910.138)
Personal Protective Equipment
• Respiratory protection.
– What kind do you need?
• Respirator (if required – depends on concentration):
– You must have a written respiratory protection program.
– Must be the right kind (e.g. organic vapor for MEK).
– Fit testing, medical evaluation required.
• Filtering facepiece (aka. dust mask):
– Must have signed Appendix D (“Information for EmployeesUsing Respirators When Not Required Under the Standard”
• How do you know?
– Sampling by your workers’ compensation insurance provider.
30
Subpart I (1910.132 – 1910.138)
Everything Else: General Duty Clause
• “Each employer shall furnish to each of his employeesemployment and a place of employment which are free fromrecognized hazards that are causing or are likely to cause deathor serious physical harm to his employees …”
– Ergonomics (state OSHAs?)
– Workplace violence (state OSHAs?)
• OSHA safety and health programs (just like your SMS):
– Management commitment, employee involvement.
– Worksite analysis.
– Hazard prevention and control.
– Training.
31
(OSH Act of 1970, 29 USC 654)
A Word on Training
• Train, train, train.
– Document, document, document.
• Remember to train those employees who are:
– Authorized (those who do the work).
• Person driving the tug.
– Affected (who are affected by the work being done).
• Pilot of the airplane.
– Other employees (who may be where work is being done).
• Scheduler/dispatcher.
• “Incidental” training: if you’re not authorized, you can’t do it.
32
Authorized – affected – other
Something’s Happened … now what?
33
Notification and recordkeeping
Recordkeeping (29 CFR 1904)
• Immediate notification (within 8 hours, orally): (800) 321-OSHA.
– Fatality (death of any one employee from a work-related incident).
– Catastrophe (in-patient hospitalization of three or more employeesas a result of a work-related incident).
• CA, OR, WA: one hospitalization.
• Recordkeeping (size exemption: 10 or fewer employees at alltimes during the last calendar year).
– Must keep records for each establishment (basically, physicallyseparate).
• Forms 300, 300A, 301
34
Something’s happened … now what?
www.osha.gov/recordkeeping/RKforms.html
Recordkeeping (29 CFR 1904)
• Form 300 (“Log of Work-Related Injuries and Illnesses”):
– Within 7 days after receiving information of:
35
Something’s happened … now what?
www.osha.gov/recordkeeping/RKforms.html
• Work-related …
• New case …
• Death, days away from work,restricted work, transfer toanother job, medical treatmentbeyond first aid, loss ofconsciousness, diagnosis of asignificant injury or illness.
– Must record who, what kind ofinjury, days away/restricted work.
Recordkeeping (29 CFR 1904)
• Form 300A (“Summary of Work-Related Injuries and Illnesses”):
36
Something’s happened … now what?
www.osha.gov/recordkeeping/RKforms.html
– Must post in a conspicuous placeFebruary 1 – April 30 of thefollowing year.
– Must complete even if everything iszero (no injuries/illnesses).
– Must be certified by:
– Owner
– Officer of corporation
– Highest-ranking companyofficial at the establishment orhis/her immediate supervisor.
Recordkeeping (29 CFR 1904)
• Form 301 (“Injury and Illness Incident Report”):
37
Something’s happened … now what?
www.osha.gov/recordkeeping/RKforms.html
– “Or equivalent”:
– Some workers compensationforms are an acceptablesubstitute.
OSHA Standards Protect …
38
… but only if you comply with them
Towards OSHA Compliance
• Take an OSHA class.
– 10-hour curriculum, 30-hour curriculum.
• Get started.
– Take an inventory of what you need to do.
– Don’t buy stuff: contact your State OSHA Consultation Program.
• They will be able to provide (free) templates for writtenprograms.
• Give it your best shot. (Nobody’s perfect.)
• Ask for an OSHA On-Site Consultation.
– Call your State OSHA Consultation Program, not (800) 321-OSHA.
39
Your OSHA wish list
http://www.osha.gov/dcsp/smallbusiness/consult.html
Here to Help … And They Mean It
• An on-site consultation visit is similar to a “wall-to-wall” OSHAinspection, except:
– By law, identified hazards cannot be used for enforcementpurposes.
– The consultant(s) will give you a list of “serious hazards”, that youmust abate, within a specific timeframe (for instance, 6 weeks).
• Extensions are possible.
• “Imminent danger” requires immediate action.
– Careful: If you do not abate serious hazards within the agreedtimeframe, by law, they will be used for enforcement purposes.
• Minimum fine for willful violations: $5,000 per violation … perday.
40
OSHA’s On-Site Consultation Program
Continuing OSHA Compliance
• Set up an internal audit program.
– Checklist:
• Are fire extinguishers inspected as required?
• Are exits/fire extinguishers/electric shut-offs unobstructed?
• Are contents of First Aid kit unexpired?
• Does everything still look right?
• Etc.
• Ask for an OSHA on-site consultation every two years.
– Being under a voluntary program gives you immunity fromprogrammed OSHA inspections.
41
Your OSHA wish list for next year … and beyond
That’s it, folks
42
Is PowerPoint Poisoning OSHA reportable?
top related