surface dewatering pumps solutions - atlascopco.com · surface dewatering pumps the surface...
Post on 08-Sep-2019
11 Views
Preview:
TRANSCRIPT
Surface dewatering pumpsThe surface dewatering pumps range are designed and developed to offer high performance, reliability and ease of use across multiple industries for applications like construction and mine site dewatering, removing floodwater, and other municipal applications.
At Atlas Copco, we understand pumps, their application and most importantly, the people using them. We have a complete range of diesel and electric driven pumps, that offer durability and long life. Modular design offers flexibility in packaging and easy servicing of wear components means less down time and more pumping without stopping.
SOLIDS00 mmUP TO
HANDLING
1SOLIDS76 mmUP TO
HANDLING
www.atlascopco.com/surface-pumps2
FLUSHINGMECH SEAL
minCLEAN-UP1
MAX. HEADUP TO
40 mMAX. HEADUP TO
75 m
MAX. FLOWUP TO 2100m3/h
MAX. FLOWUP TO 1400m3/h
CLEAN-UPAND RESTART
minHINGE DOOR
3
COMPACT
SIZEwith maximum flow
24 OF CONTINUOUS OPERATION
HOURS
www.atlascopco.com/surface-pumps 3
There is a surface pump for any surface dewatering application
• Effluent handling and transporting.
• Waste drainage and disposals.• Temporary firefighting
protection.
5. Industry The effluent produced by different industries should be treated, relaunched or drained. With the availability of different materials for our wet ends, we offer a complete solution.
Application
• Sump water removal • Dewatering
6. Civil worksModern day civil engineering projects are fast paced. Be it construction of road, dams, bridges, airports or building, site dewatering and drainage, before and during construction work is very important.
Application
• Emergency
7. Floods controls Our pumps, due to their high performance and portability, are effective to provide quick solutions in case of flood emergency.
Application
• Groundwater level reduction
• Pipeline on-shore • Polluted soil remediation • Tunneling
8. WellpointAll the areas with high ground water level needs to be reduced before the initial digging up of the land. Our pumps can be installed on a side or around the excavation site.
Application
• General construction • Flood controls• Industry• Mine and quarry dewatering
9. Rental Rental application requires robust and long running products. Our start and forgot control panels and more than 24 hours fuel autonomy make them ideal for such applications
Application
1. Oil & Gas Pipelines used to transport crude oil or natural gas must be dewatered to guarantee the quality of the hydrocarbons and prevent the formation of hydrates and protect pipes from internal corrosion.
Ballasting process requires robust high performing pumps which, based on the needs, pumps sea water in and out of the shipyard tank during the loading and unloading of water vessels.
Application• Ballasting• Pipeline hydrostatic test • Drilling • Pipeline flushing
• Dewatering• Water relaunching• Washplants• Slit and Sludge removal
2. Mining and QuarryFor dewatering applications in the mines post dredging , our pumps offer effective and efficient solutions due to their solids handling capability.
Application
• Sewage bypass • Dewatering• Emergency water treatment
3. MunicipalitiesMunicipal public service applications can vary from sewage bypass to wastewater treatment plants to water
reclamation centers. When wastewater is being treated, our pumps handle the fluids and solids without clogging or failing.
Application
• Site drainage• Jetting
4. ConstructionOn Construction site,during casting of foundation it becomes critical to avoid water infiltration. Our pumps have got you covered.
Application
CLEAN-UP
EASY MAINTENANCE
3 MIN
www.atlascopco.com/surface-pumps4
PACKAGING FLEXIBILITY• One-by-one stackability in
standard canopy and open version.
• Mobility, with heavy-duty skids and road trailer equipped for a range of conditions.
SERVICEABILITY IN ANY CONDITIONS• Patented Hinged door access guarantees easy
clean-up with minimal downtime.
• All wear components are easily accessible with minimal downtime.
• Easy replacement of the wear components (Impeller and wear plates).
• Trimming plate to guarantee the hydraulic performance as an emergency reserve, before scheduled maintenance.
PAS rangeThe PAS range of dry prime pumps are engineered to offer high performance in any conditions. Comprising of a air separator unit and a vacuum pump, it offers rapid automatic primming. Even with suction heights of several meters,the machine rapidly evacuates the air from the suction pipe and starts to pump.
Additionally, thanks to the semi-open impeller, the PAS range is also suitable for pumping liquids with solids in suspensions.
STACKABILITY
SOLIDS00 mmUP TO
HANDLING
1
www.atlascopco.com/surface-pumps 5
* Available options may change depending on model selected.
INTEGRATED CONTROL AND POWER CUBICLE • Digital controller with standard warnings,
shutdown, stop/start function, emergency stop and easy-to-access and read diagnostics. Configurable set point via transducer to control engine speeds*
SOLIDS HANDLINGS CAPABILITY• The whole range can handle
high solids.
FLEX-MOUNT SYSTEM• Integrated vibration mounts eliminate
unwanted vibration.
• Hinge Kit
• Trimming plate*
• Diaphragm vacuum pump
• Dry runnning system
• PW 250, PW500, PW 750 control panel*
• Impeller CF3M
• Wear plate CF3M
• Stainless steel shaft
• Zinc anodized
Key options Key features
www.atlascopco.com/surface-pumps6
The VAR range of wet prime pumps offer a robust and flexible solution for dewatering applications. The technology allows to have a simple first prime due to its first water fill in capabilities.
Due to its open impeller and solids handling capabilities, the equipment perfectly suits for medium construction and flood controls.
VAR range
WET PRIME SYSTEM • The system allow the unit to prime in every conditions
trough first water filling up.
• The liquid rings formed evacuates air in order to have quick primming.
POSIBLE IN MOBILITY PACKAGE• Open-frame version available.
www.atlascopco.com/surface-pumps 7
MECHANICAL SEAL FLUSHING • Integrated port on pump casing to flush
the mechanical seal.
• Solution guarantees the right start up of the units and helps prevent possible casing failure due to fluid solidification.
FLEX-MOUNT SYSTEM• Integrated vibration mounts
eliminate unwanted vibration.
SOLIDS HANDLINGS CAPABILITY• The whole range can handle high solids.
• Impeller CF3M
• Wear plate CF3M
• Stainless steel shaft
• Zinc anodized
Key options
SOLIDS76 mmUP TO
HANDLING
www.atlascopco.com/surface-pumps8
PAS rangeTechnical data
Specifications PAS 100 MF 250
PAS 100 MF 260
PAS 150 MF 250
PAS 200 MF 305
PAS 300MF401
PAS 100 HF 250
PAS 150 HF 300
PAS 200HF 305
PAS 300HF440
Max. head m 36 42 37 30 24 51 51 50 75
Max. capacity m3/h 250 325 540 630 1150 280 520 920 2160
Suction /discharge size
DN100 (4") DN100 (4") DN150 (6") DN200 (8") DN300(12") ANSI 4" ANSI 6" ANSI 8" DN300 (12")
Max. solids handling mm 50 76 76 76 100 76 76 76 89
Best efficiency point
% 70 70 77 64 62 70 70 75 72
Max. absorbed power
kW 17 24 27 33 65 29 51 78 210
Engine
Emission compliance Stage 3A Stage 3A Stage 3A Stage 3B Stage 4 Stage 3B Stage 3B Stage 4 Stage 4
Max. engine power
kW 24,3 28,4 28,4 33,6 79,1 31,0 51,2 79,1 210
Max. operating speed
rpm 2000 2000 2000 1800 1500 2200 2200 2200 1600
Max. fuel autonomy h 51 48 48 48 24 45 27 22 12
Weight and dimensions
Weight (dry) kg 1260 1260 1400 1600 2600 1380 1680 2250 4200
Length mm 2250 2250 2250 2560 2610 2560 2560 2610 3900
Width mm 1100 1100 1100 1100 1225 1100 1100 1225 2200
Height mm 1550 1550 1550 1705 1840 1705 1705 1840 2000
LOOKING FOR ELECTRIC?*
ALSO AVAILABLEOPTIONS
* Please consult with your local representative.
LengthWidth
Heigth
www.atlascopco.com/surface-pumps 9
[m³/h]00
10
30
20
0 400 800 1200
100 200
[USgpm]
[m][ft]
0
40
80
120
HEAD
FLOW
1800
2000 rpm
1600
1400
0[m³/h]0
0
10
30
20
0 800400 1200 1600 2000
100 200 300 500400
[USgpm]
[ft] [m]
20
40
60
80
100
120
HEAD
FLOW
1800
1600
1400
1500 rpm
[m³/h]0 400200 600 800 10000
10
30
20
[m]
0
[ft]
20
40
60
80
100
120
[USgpm]1200 2400 480036000
HEAD
FLOW
0 [m³/h]0
10
20
30
40
50
150 300 450
[m]
Q[USgpm]0 500 1000 1500 2000
0
[ft]
40
80
120
160
HEAD
FLOW
2200 rpm
2000
1750
1450
10001200
00
10
40
30
20
[m³/h]0 100 200 300
0 400 800 16001200 [USgpm]
[m][ft]
40
80
120
HEAD
FLOW
1800
2000 rpm
1600
1400
[m³/h]0 200 400 600
0 800 1600 2400 3200 [USgpm]
0
10
30
20
[m][ft]
0
20
40
60
80
100
120
HEAD
FLOW
1800 rpm
1600
1400
0 [m3/h]0
10
20
30
40
50
100 200 300
[m]
[USgpm]0 400 800 1200 1600
0
30
60
120
150
180
90
[ft]
HEAD
FLOW
2200 rpm
2000
1750
1450
12001000
0 [m³/h]0
10
20
30
40
50
200 400 600 800
[m]
[USgpm]
[ft]
40
80
120
160
40000 500 1000 1500 2000 2500 3000 3500
0
HEAD
FLOW
2200 rpm
2000
1800
1400
1600
0 [m3/h]400 800 1200 1600 20000
10
20
30
40
50
60
70[m]
0
[ft]
40
80
120
160
200
1000 2000 3000 4000 5000 6000 7000 8000 9000 [USgpm]0
HEAD
FLOW
1600 rpm
1400
1200
1000
PAS 100 MF 250 PAS 100 MF 260
PAS 150 MF 250 PAS 200 MF 305
PAS 300 MF401PAS 100 HF 250
PAS 150 HF 300PAS 200 HF 305
PAS 300 HF440
Performance curves
www.atlascopco.com/surface-pumps10
Specifications VAR 4-250 VAR 6-250 VAR 8-305 VAR 10-305 VAR 12-400
Max. head m 40 33 35 39 29,3
Max. capacity m3/h 180 340 560 690 1400
Suction /discharge size
Threaded 4" BSP
Flanged DN 150 D.I. 1882 (6")
Flanged DN 200 UNI 6082
(8")
Flanged DN 250 D.I. 1882
(10")
Flanged DN 300 UNI 6082
(12")Max. solids handling mm 50 76 76 76 70
Best efficiency point % 65 60 53 70 54
Max. absorbed power kW 16,5 25 31 45 85,5
Engine
Emission compliance Stage 3A Stage 3A Stage 3B Stage 4 Stage 4
Max. engine power kW 24,3 28,4 33,6 47,7 79,1
Max. operating speed rpm 2000 2000 1800 1800 1150
Max. fuel autonomy h 48 42 50 47 29
Weight and dimensions(1)
Weight (dry) kg 905 935 1205 1850 2125
Length mm 1750 1750 2500 2800 2800
Width mm 950 950 950 1450 1450
Height mm 1520 1520 1850 1850 1850
VAR rangeTechnical data
LOOKING FOR ELECTRIC?*
ALSO AVAILABLEOPTIONS
(1) Dimensions refer to Block model.Please refer the data sheet with overall dimensions with options
* Please consult with your local representative.
LengthWidth
Heigth
www.atlascopco.com/surface-pumps 11
Performance curves
0 [m³/h]50 100 1500
10
20
30
[m]
[USgpm]0 200 400 600
0
20
40
60
80
100
120
[ft]
1.800
2.000 rpm
1.600
1.400
HEAD
FLOW
0 [m³/h]100 200 3000
5
10
15
20
30
25
[m]
[USgpm]0 400 800 1200 1600
0102030405060708090
100
[ft]
2.000 rpm
1.800
1.600
1.400
HEAD
FLOW
0 [m³/h]150 300 4500
5
10
15
20
25
30
[m]
[USgpm]0 500 1000 1500 2000
0
[ft]
20
40
60
80
1001800 rpm
1600
1400
1200HEAD
FLOW
[m³/h]0 200 400 600
0 800 1600 2400 3200 [USgpm]
0
10
30
20
[m][ft]
0
20
40
60
80
100
1201800 rpm
1600
1400
1200HEAD
FLOW
[m³/h]0 300 600 900 12000
5
10
15
20
25
[m][ft]
0
20
40
60
80
[USgpm]3600 4800 6000240012000
1150
1100
1000
900
HEAD
FLOW
VAR 4-250
VAR 8-305
VAR 12-400
VAR 6-250
VAR 10-305
2958
192
0 00
© A
tlas C
opco
Pow
er a
nd F
low
div
ision
. 201
9
Atlas Copco ABatlascopco.com
Product portfolio
*Multiple configurations available to produce power for any size application
ONLINE SOLUTIONS
Diesel and electric options available
PORTABLE1,6–12 kVA
MOBILE CONTAINERS9–1250* kVA 800–1450 kVA
INDUSTRIAL10–2250* kVA
GENERATORS
DEWATERING PUMPS
ELECTRIC SUBMERSIBLE250–16.200 l/min
833–23.300 l/minSMALL PORTABLE
SHOP ONLINEPARTS ONLINE
POWER CONNECT FLEETLINK
210–2500 l/min
Find and order the spare parts for power equipment. We handle your orders 24 hours a day.
Scan the QR code on your machine, and go to the QR Connect Portal to find all the information about your machine.
Intelligent telematics system that helps optimize fleet usage, reduce maintenance costs, ultimately saving time and cost.
SURFACE PUMPS
DIESEL LED AND MH
BATTERY LED ELECTRIC LED
LIGHT TOWERS
AIR COMPRESSORS AND HANDHELD TOOLS
AIR COMPRESSORS HANDHELD TOOLS1–116 m³/min7–345 bar
PneumaticHydraulicPetrol engine driven
top related