straight thru cabling
Post on 17-Dec-2014
361 Views
Preview:
DESCRIPTION
TRANSCRIPT
wo o WG B WB G WBR BR
1 2 3 4 5 6 7 8
PINS
wo o WG B WB G WBR BR
1 2 3 4 5 6 7 8
PINS
CLIP IS POINTED AWAY FROM YOU
Cut the cable insulator to show all the eight wires.
Strip off the insulator.
Sepate all eight wires.
Position all eight wires according to its assigned pins in the RJ45 .
1
2
3
4
56
7
8
Position all wires. Make sure that all are in proper pin assignment.
Cut the wires.
Make sure that the cut is even and small enough for the RJ45.
Put all wires inside the RJ45.
Pin 1
Make sure all wires reach the pins
Crimp the RJ45 using Crimpping tool
Now you have your Straight –thru network cable. Repeat the steps on the other end of your cable.
wo o WG B WB G WBR BR
1 2 3 4 5 6 7 8
PINS
wo o WG B WB G WBR BR
1 2 3 4 5 6 7 8
PINS
CLIP IS POINTED AWAY FROM YOU
top related