stilt group

STILT GROUPWater Treatment Systems & Innovations

2

Who we Are?• Stilt Group is owned by Sudan Saudi Agricultural

Investment Co. LTD (SSAI) established in 1987, with a Far Sighted Plan to Introduce Advanced Methods In Drinking Water Purifications Systems.

• Stilt Group Succeed To Modify And Innovates The Traditional Purification Systems In Drinking Water, To A New Concepts Offering a Wide Range Of Optimal Options .

• Stilt Group consists of two branches :

3

I. STILT SOIL & WATER INNOVATION CENTRE

II. STILT AGRO INDUSTRIAL EQUIPMENTS FACTORY

Stilt group consists of two wings:STILT GROUP BRANCHES

4

STILT SOIL & WATER INNOVATION CENTER

• Is the HUB Of Researches & Innovation , Each System Has To Be Evaluated And Innovated In The Center To The Most Simplified , Durable , Cheap & Space Saving Plants .• An Integral Commercial Plants From The New Systems Has To Be Manufactured , Tested In Accordance With – WHO Standards , To Be Used In Production Lines For Producing A Healthy Drinking Water

5

STILT SOIL & WATER INNOVATION CENTER

o STILT * WATER & SOIL INNOVATION CENTER – Is about to Innovates A New System , Working Hydraulically With Only One Diesel Pump To Cater All Water Purification Needs, Including Dosing Of Polymers & Chlorine.

o STILT systems has been examined, Approved & qualified by The State Quality Control Department For Producing, Cheap & Save Drinking Water .

6

STILT SOIL & WATER INNOVATION CENTER

oSTILT systems has been examined & Approved BY THE Intellectuals Property Authority granting a Patent certificate to the founder.

7

STILT AGRO INDUSTRIAL EQUIPMENTS FACTORY

o A Manufacturer Supplier For Drinking Water Purification Systems , Specialized In , Designing , Manufacturing , Installation , Maintenance & Training For Residential, Commercial & Industrial Water Purification Projects , Including Supplies for Pipe Lines Net Work Supplies , Water harvesting & Treatment Chemicals .

OBJECTIVES

8

STILT * APPLICATION AREAS

To purify Surface & Well raw water to standard drinking water • River , canal & well • Domestic water re filtration • Cooling towers• Algae & odor control • Dust stop Surface WaterTo purify raw water to standard drinking water by eliminating sand, silt, snails ,baby mussels and its eggs, algae which exist in the water Well Water To treat silt, sand , hardness , ferrous composites , chemical contaminants and micro organisms & adjust water quality to nun aggressive water standard .

9

Cooling TowersTo eliminate:particles, rust, dust, sand, leaves, pollens and insects.pollutant coming from the process and biologic

OBJECTIVESSTILT * APPLICATION AREAS

Discharge to Surface WaterTo eliminate pollutant particles from the wastewater before discharging.

Agriculture To protect irrigation equipment such as drippers, sprinklers and micro-jets.

10

(FACTORY ENTRANCE PICTURE)WHAT WE DO FOR YOU:

•WE Understand The Water Purification Needs According to ( WHO Standard & SDW –Act ), and we deliver the quality you expect with a variety of selections & features to meet your specific application, with comparatively very low cost.

11

Types of Stilt Water Treatment Systems:Surface Water Treatment Systems

I. Low cost Traditional System II. Low cost second Generation System

12

Surface Water Treatment Systems

Traditional SystemFeatures:

• Capacity from 120 m3: 10000m3

• working with only one pump for the total process

• Manufactured locally with 90% of local materials

• Low initial cost

• Low running cost

• Maintenance free

• System operating with only one pump & one operator

13

(ITELECTUAL Certificate Copy)Traditional System

Process :1. Intake pump.2. Mixing and dosing of Polymer (mixer).3. Pre-treatment unit . Coagulant will take space to work and

remove almost 90% of turbidity.4. Sedimentation tank phase 1.5. Sedimentation tank phase 2.6. Dosing of Chlorine.7. Regardless of turbidity level in raw water , the final product

will be less than 5 NTU.

14

Second Generation SystemFeatures: • Capacity from 10 m3: 1000m3

• Working with only one pump for the total process

• Manufactured locally with 90% of local materials

• Low initial cost

• Low running cost

• Maintenance free

• System working with only one pump & one operator

15

Second Generation SystemProcess

4. Sedimentation tank phase 1.5. Sedimentation tank phase 2.6. Final filtration 7. Dosing of Chlorine.8. Regardless of turbidity level in raw

water , the final product will be less than 5 NTU.

1. Intake pump.2. Mixing and dosing of Polymer

(mixer).3. Pre-treatment unit . Coagulant will

take space to work and remove almost 90% of turbidity.

16

Sample of Raw water & Treated water

Raw water with 32000 NTU before treatment

Treated water less then 5 NTU

17

Commercials

• Pumps• Fittings• Valves• Additives• Filtration Media• Laboratory Equipments

Commercials: Beside manufacturing & implementation of treatment plants, STILT GROUP provide all necessary materials such as :

• Pipes

18

Contacts

Presenter:

Mr. Maaz Osman

General Manager

Mobile: +249912344039 - +249123044039

Email: gm@stiltgroup.org

Web: www.stiltgroup.org

Address: Khartoum - Sudan