steel grades1

NL | EN | FR Calculation Sitemap

Steel grades Sheet piles Tubes HP piles

AutoCad files Calculation Documentation

Steel grades - Sheet piles

Hot rolled sections (except GU sections)

Mechanical properties according to EN 10248-1:1995 and comparable international standards. Other steel grades can be delivered on request.

Grades S 460 AP, A 690 and A 572 Gr. 65 on request.

Hot rolled GU sections

Mechanical properties according to EN 10248-1:1995 and comparable international standards.

Grade S 355 GP on request.

Cold formed sections

Mechanical properties according to EN 10249-1:1995 and corresponding former national standards. Other steel grades can be delivered on request.

The C in JRC and J0C stands for cold forming aptitude according to EN 10025:1993.

Standard referred to: EN 10248-1:1995 Comparable international standards

Steel grade

Minimum yield strength ReH

Minimum tensile strength Rm

Minimum elongation USA Canada Japan

N/mm2 N/mm2 % ASTMCSA

G 4021JIS

A 5528S 240 GP 240 340 26S 270 GP 270 410 24 A 328 Gr. 260 WS 320 GP 320 440 23 Gr. 300 WS 355 GP 355 480 22 A 572 Gr. 50; A 690 Gr. 350 WS 390 GP 390 490 20 A 572 Gr. 55 SY 390S 430 GP 430 510 19 A 572 Gr. 60 Gr. 400 WS 460 AP* 460 550 17 A 572 Gr. 65

Standard referred to: EN 10248-1:1995 Comparable international standards

Steel grade

Minimum yield strength ReH

Minimum tensile strength Rm

Minimum elongation USA Canada

N/mm2 N/mm2 % ASTMCSA

G 4021S 240 GP 240 340 26S 270 GP 270 410 24 A 328 Gr. 260 WS 320 GP 320 440 23 Gr. 300 WS 355 GP 355 480 22 A 572 Gr. 50; A 690 Gr. 350 W

Standard referred to: EN 10249-1:1995 Former references

Steel grade

Minimum yieldstrength ReH

Minimum Tensilestrength Rm

Minimum elongationF D GB B

N/mm2 N/mm2 %

S 235 JRC 235 340-470 26 E 24-2 St 37.2 40 B AE 235-BS 275 JRC 275 410-560 22 E 28-2 St 44.2 43 B AE 275-BS 355 JOC 355 490-630 22 E 36-3 St 52.3 U 50 C AE 355-C

Disclaimer

Home Products About us Service Information Contact News

Page 1 of 1Steel grades - Sheet piles

6/21/2009http://www.arcelorprojects.com/EN/steel_grades1.htm