stainless steel products - rodavigo.net
Post on 14-Nov-2021
3 Views
Preview:
TRANSCRIPT
STA
INLE
SS
ST
EE
L P
RO
DU
CT
S
Chain Slings and Accessories l Wire Rope Slings l Ropes as Piece Goods l AccessoriesTurnbuckles l Thumbles l Lifting Points screw-on l Lifting Points weld-on l Chain HoistsLifting Beams
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
475
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
476 Carl Stahl DIRECT International No. 6 I
Corrosive agent Concentration Temperature 1.4307 1.4401 1.4404 1.4462
Chloride - - 1 L 1 L 1 L 1 L
Acetic acid C2H2O2 - - 1 0 0 0
Fatty acid C18H34O2 - 150 °C 1 0 0 0
Fluorine 40% - 1-2 1-2 1-2 1-2
Gallic acid C6H20O2H - - 0 0 0 0
Hydroxyde (alkaline) 20% - 0 0 0 0
20% boiling 1 1 1 1
Lactic acid 10% boiling 1 0 0 0
Nitrosulphuric acids 1-2% boiling 2 0 0 0
Phosphoric acid 60% boiling 2 1 1 1
Nitric acid HNO3 1-66% 20% 0 0 0 0
1-40% boiling 0 0 0 0
40-99% boiling 1-2 1-2 1-2 1-2
Hydrochloric acid HCI 0-5% 20% 1 L 1 L 1 L 1 L
1-2% - 2 - 3 L 2 - 3 L 2 - 3 L 2 - 3 L
1-2% 50°C 2 - 3 L 2 - 3 L 2 - 3 L 2 - 3 L
Sulphuric acid H2SO4 1-50% 20°C 1-2 1 1 1
1-50% 70°C 1-2 0-2 0-2 0-2
1-50% boiling 2-3 2-3 2-3 2-3
Seawater* - < 60°C 0 - 2 L 0 - 1 L 0 - 1 L 0 L**
Sulphate - boiling 0-3 0-3 0-3 0-3
Tartaric acid 50% boiling 2 1 1 1
0 = Resistant against erosive surface corrosion1 = Slight attack by erosive surface corrosion2 = Little resistance against erosive surface corrosion3 = Not resistant against erosive surface corrosionL = Pitting, crevice or stress corrosion might occur*No accumulation or concentration of chloride ions
**Generally highly resistant against seawater
Under unfavourable conditions corrosive attacks may occur in tight crevices.
The selection of the above-mentioned corrosive agents has been made according to their frequency of occurrence but maybe extended in many areas. These indications result from laboratory tests of the material manufacturers and may only serveas a rough guide as practical application conditions cannot be compared with laboratory results.
Corrosion resistance of stainless steel materials
Chain SlingsWire Ropes and AccessoriesSafety HooksLifting BeamsPallet TrucksSuperkraft Woven Wire Rope Slings
For use in theFood IndustryChemical IndustryDyeing Plants, Pickling Plants, Hardening ShopsNavigation
and any place where corrosion is a problem!
Stainless steel slingsand load suspensionequipment for industrial use
Working load limit depending on the chain temperature
W.L.L.
-40°C to +250°C
100 %
above 250°C to 350°C*
75 %
above 350°C to 450°C
50 %
*1.4462 (AISI 318LN) max. 350°C allowed
STAINLESS STEEL PRODUCTSCorrosion resistance
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
484 Carl Stahl DIRECT International No. 6 I
STAINLESS STEEL PRODUCTSShackles
Load capacity
(WLL)
in kg
Dimensions
in mm
Weight
ca. kg
Item no.
P B J L
Load capacity
(WLL)
in kg
Nominal
size
Dimensions
in mm
Weight
in kg/pce
Item no.
B J L
500 M8 8 16 32 0.075 25301810015012
350 M6 6 13 25 0.048 25301810015011
800 M10 9.5 19 38 0.136 25301810015013
1000 M12 11 22 44 0.212 25301810015014
1250 M12 12.7 26 52 0.331 25301810035065
1800 M16 14.3 29 58 0.585 25301810015015
2800 M20 16 32 64 0.760 25301810015016
3300 M22 19 38 76 1.180 25301810015017
4500 M24 22 44 88 1.750 25301810015018
5000 M27 25.4 50 100 2.600 25301810015019
Load capacity
(WLL)
in kg
Nominal
size
Dimensions
in mm
Weight
in kg/pce
Item no.
B J W L
280 M6 6 13 19 28 0.052 25301810015020
25301810015021
25301810015022
25301810015023
25301810015024
25301810015025
25301810015026
25301810015027
25301810015028
25301810015029
400 M8 8 16 25 35 0.081
600 M10 9.5 19 28 38 0.147
800 M12 11 22 33 46 0.221
1000 M12 12.7 26 38 52 0.354
1500 M16 14.3 29 43 60 0.635
2500 M20 16 32 50 68 0.805
3000 M22 19 38 58 76 1.250
4000 M24 22 44 66 88 1.820
4500 M27 25.4 50 76 100 2.700
High Strength Stainless Steel D-shackle, forged, stamped with Load Capacity
• Material: Bracket and pin forged highstrength stainless steel
• Material: 1.4542• Safety factor:
Minimum breaking load = 6 times load bearing capacity
• Labelling: CE marking, batch number, manufacturer and load bearing capacity
• Operating temperature range:-40°C to + 250°C
• Certificates: A BS EN 10204 3.1b certificatefor this product can be supplied on request
• Test: Each shackle is tested and certified for2 times the load bearing capacity
Stainless Steel D-shackle with Nut and Pin, forged, stamped with Load Capacity
Stainless Steel Bow Shackle with Nut and Pin, forged, stamped with Load Capacity
B
J
LP
B
J
L
Higher load capacity
due to special material
• Material: Bracket and pin forged stainlesssteel
• Material: 1.4401• Safety factor:
Minimum breaking load = 6 times load bearing capacity
• Labelling: CE marking, batch number, manufacturer and load bearing capacity
• Operating temperature range:-40°C to + 250°C
• Material: Bracket and pin forged stainlesssteel
• Material: 1.4401• Safety factor:
Minimum breaking load = 6 times load bearing capacity
• Labelling: CE marking, batch number, manufacturer and load bearing capacity
• Operating temperature range:-40°C to + 250°C
1000 10.0 8.0 16 32 0.085 25301810015001
25301810015002
25301810015003
25301810015004
25301810015005
25301810015006
25301810015007
25301810015008
25301810015009
25301810015010
2000 12.7 10 20 40 0.150
3000 16 12.7 25 50 0.350
5000 19 16 32 64 0.550
7000 22.2 19 38 76 1.000
9000 25.4 22.2 44 88 1.900
11000 28.6 25.4 51 102 2.900
13000 31.8 28.6 57 114 3.100
15000 34.9 31.8 64 128 4.350
18000 38 34.9 70 140 5.300
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
Carl Stahl DIRECT International No. 6 I 485
Rope Ø
in mm
Load capacity
1-leg single
direct in kg
Item no.
8 600 25102000015090
10 1000 25102000015091
12 1300 25102000015092
14 1800 25102000015093
16 2300 25102000015094
20 3600 25102000015095
Item no.
25102000015546
25102000015547
25102000015548
25102000015549
25102000015550
25102000015551
Item no.
25102000015320
25102000015321
25102000015322
25102000015323
25102000015324
25102000015325
Item no.
25102000015626
25102000015627
25102000015628
25102000015629
25102000015630
25102000015631
Wire rope slingwith pressedloops, 1-leg
Wire rope slingwith pressed loopand master link
Wire rope slingwith master linkand safety hook
Wire rope slingwith pressed loopand safety hook
Wire rope slingwith 2 master links
2-leg wire ropesling with master links
2-leg wire ropesling with masterlinks and safety hook
The load capacities assumethat for one-legged wire ropeslings without a thimble loop,the lifting point has a diame-ter of at least twice the ropenominal diameter.
STAINLESS STEEL PRODUCTSWire Ropes
Rope Ø
in mm
Load capacity
1-leg single
direct in kg
8 600
10 1000
12 1300
14 1800
16 2300
20 3600
Item no.
25102000016120
25102000016121
25102000016122
25102000016123
25102000016124
25102000016125
Load capacity 2-leg
in kg at angle
0 - 45° 45 - 60°
840 600
1400 1000
1800 1300
2500 1800
3200 2300
5000 3600
Item no.
25102000016738
25102000016739
25102000016740
25102000016741
25102000016742
25102000016743
Item no.
25102000016576
25102000016577
25102000016578
25102000016579
25102000016580
25102000016581
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
486 Carl Stahl DIRECT International No. 6 I
Rope Ø
in mm
Minimum breaking load (MBL)
1,570 N/mm2
Item no.
kN kg
2.0 2.08 291 20101000025007
3.0 4.69 478 20101000025008
20101000025009
20101000025010
20101000025011
20101000025012
20101000025013
20101000025014
20101000025015
20101000025016
4.0 8.34 850
5.0 13.0 1330
6.0 18.8 1920
8.0 33.4 3410
10.0 52.1 5310
12.0 75.1 7660
16.0 133.0 13600
Weight
in kg/m
0.017
0.034
0.060
0.093
0.134
0.238
0.372
0.536
0.955
7.0 27.41 2800 0.196
Rope Ø
in mm
Minimum breaking load (MBL)
1,570 N/mm2
Item no.
kN kg
8.0 35.7 3641 20101000025017
20101000025018
20101000025019
20101000025020
20101000025021
20101000025022
20101000025023
10.0 55.9 5700
12.0 80.5 8210
14.0 110.0 11200
16.0 143.0 14600
18.0 181.0 18500
20.0 224.0 22800
Weight
in kg/m
0.260
0.409
0.589
0.802
1.050
1.330
1.640
Stainless Steel Stranded Rope, Material 1.4401, Construction 6x19M-WSC
Stainless Steel Wire Rope, Material 1.4401, Construction 6x36WS-IWRC
Rope class / Number of outer strands:6x19/ 6
Lay / Lay direction available in:sZ
Categories:not rotation-resistant
Swivel:not allowed
Rope class / Number of outer strands:6x36 / 6
Lay / Lay direction available in:sZ
Categories:not rotation-resistant
Swivel:not allowed
STAINLESS STEEL PRODUCTSWire Ropes
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
Carl Stahl DIRECT International No. 6 I 487
Woven Wire Rope Sling
With 2 stranded eyes, in stainless steel 1.4401/1.4310Special sizes and widths on request!
• Low dead weight in relation to load• Customised loop lengths for different applications
Width
in mm
Thickness
in mm
Load capacity
(WLL) in kg
direct umgelegt
Item no. Additional metre
in kg
Weight 1st metre
in kg
30 6750 25104000035017 1.6 1.01500
40 61250 25104000035018 1.9 1.32500
40 102000 25104000035019 4.1 2.24000
60 103000 25104000035020 4.5 2.56000
90 10
Loop length
in mm
195
195
300
300
4006000 25104000035021 7.2 4.612000
120 10 4108000 25104000035022 9.2 6.216000
Low dead weight
in relation to load
Other versions of woven wire rope slings can be found starting on page 336.On request they are also available in stainless steel.
2b
1l
5
5d
1b
l
1d
Thread
d1
Dimensions
in mm
Item no.
b1
M5 6 25301815015001
25301815015002
25301815015003
25301815015004
25301815015005
25301815015006
25301815015007
25301815015008
M6 8
M8 10
M10 12
M12
Load capacity
(WLL) in t
0.187
0.275
0.500
0.775
1.125 14
M14 1.500 14
M16 2.050 16
M20 3.200 20
b2
9
10
11
13
20
22
26
30
d5
5.0
6.0
8.0
9.0
12.5
12.5
16.0
19.0
l1
80
95
105
125
150
165
190
210
l5
130 - 190
150 - 220
180 - 255
220 - 300
270 - 385
300 - 425
360 - 500
390 - 560
Weight
in kg/100 pcs
5.2
10.2
16.5
29.8
51.3
59.9
114.2
170.2
Turnbuckle with 2 Forks, Material 1.4401
STAINLESS STEEL PRODUCTSSlings, Turnbuckles
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
488 Carl Stahl DIRECT International No. 6 I
bl 1
l 2
f f
b
l 1
l 2
me e
m
bl 1
l 2
mf e
Nominal
size
= thread
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
b e f l1 l2 m
M5 8 53 58 70 55 9 5.03 25301815015009
25301815015010
25301815015011
25301815015012
25301815015013
25301815015014
M6 10 85 80 110 65 10 9.50
M8 11 85 84 110 95 11 16.50
M10 12 112 105 125 120 12 29.00
M12 14 117 115 125 165 14 43.00
M16
Tens.
dist.
in mm
45
80
75
85
80
110 16 138 165 170 215 16 92.00
Nominal
size
= thread
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
b f l1 l2
M5 8 58 70 55 5.21 25301815015015
25301815015016
25301815015017
25301815015018
25301815015019
25301815015020
M6 10 80 110 65 9.00
M8 11 84 110 95 15.50
M10 12 105 125 120 27.00
M12 14 115 125 165 41.00
M16
Tens.
dist.
in mm
45
80
75
85
80
110 16 165 170 215 100.00
Nominal
size
= thread
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
e l1 l2 m
M5 53 70 55 9 4.85
M6 85 110 65 10 9.50
M8 85 110 95 11 17.00
M10 112 125 120 12 30.00
M12 117 125 165 14 44.00
M16
Tens.
dist.
in mm
45
80
75
85
80
110 138 170 215 16 95.00
Turnbuckle similar to DIN 1480, with Hook and Eye
Turnbuckle similar to DIN 1480, with 2 Eyes
Turnbuckle similar to DIN 1480, with 2 Eyes
All products on this page must not be used for lifting andtransport of loads!
Hook and eye are forgedMaterial: A4, highly polished
Eyes are forgedMaterial: A4, highly polished
Eyes are forgedMaterial: A4, highly polished
25301815015021
25301815015022
25301815015023
25301815015024
25301815015025
25301815015026
STAINLESS STEEL PRODUCTSTurnbuckles
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
Carl Stahl DIRECT International No. 6 I 489
Load
capacity
(WLL) in kg
Nominal
size
Dimensions in mm Weight
in kg/
100 pcs
Item no.
b1 d1 e
160 4 8 4 16 0.75 25301810015030
25301810015031
25301810015032
25301810015033
25301810015034
25301810015035
25301810015036
25301810015037
25301810015038
25301810015039
250 5 10 5 19 1.60
375 6 12 6 24 2.52
625 8 16 8 32 5.80
1000 10 20 10 40 11.10
1500 12 25 12 48 20.20
2750 16 32 16 64 47.40
3750 20 38 20 76 79.30
4750 22 44 22 88 126.00
5750 24 50 24 100 186.40
Load
capacity
(WLL) in kg
Nominal
size
Dimensions in mm Weight
in kg/
100 pcs
Item no.
A B R L1
160 4 4 8 12 16 0.80 25301810015040
25301810015041
25301810015042
25301810015043
25301810015044
25301810015045
25301810015046
25301810015047
25301810015048
25301810015049
250 5 5 10 15 20 1.80
375 6 6 12 18 24 2.60
625 8 8 16 24 32 5.80
1000 10 10 20 30 40 11.30
1500 12 12 25 36 48 20.90
2750 16 16 32 48 64 49.80
3750 20 20 38 60 80 92.50
4750 22 22 44 66 88 136.00
5750 24 24 50 75 100 192.40
D-Shackle
Bow Shackle
All products on this page must not be used for lifting and transport of loads!Load capacity is ca. 25% of the breaking load.Max. load capacity indicated on the shackles must not be exceeded.
Stainless steelMaterial: A4Finish: highly polishedMarking: Manufacturer’s mark, load capacity (WLL/kg)
Stainless steelMaterial: A4Finish: highly polishedMarking: Manufacturer’s mark, load capacity (WLL/kg)
Nominal
size
Rope Ø
in mm
Dimensions in mm Weight
in kg/
100 pcs
Item no.
a b
3 3 15 10 0.30
4 4 17 11 0.41
5 5 21 13 0.52
6 6 26 16 0.90
7 7 29 18 1.08
8 8 32 20 1.85
10 10 42 26 3.35
12 12 43 28 4.41
14 14 58 34 9.10
16 16 60 37 13.00
18 18 66 42 15.70
20 20 79 45 19.05
Stainless Steel Thimble
Material: A4Finish: highly polished
20201200015084
20201200015085
20201200015086
20201200015087
20201200015088
20201200015089
20201200015090
20201200015091
20201200015092
20201200015093
20201200015094
20201200015095
STAINLESS STEEL PRODUCTSShackles, Thimbles
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
490 Carl Stahl DIRECT International No. 6 I
Nominal
size
Rope Ø
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
b1 b2 d h1 h2 l1
2 4 12 M 4.0 5 14 15 0.46 20202200015074
20202200015075
20202200015076
20202200015077
20202200015078
20202200015079
3 6 14 M 4.0 7 14 17 0.72
4 8 17 M 5.0 7 17 20 1.27
5 10 21 M 5.0 8.5 17 25 1.46
6 12 25 M 6.0 10 23 30 2.52
8 17 31 M 8.0 14 25 37 5.42
Nominal
size
Rope Ø
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
b1 b2 d h1 h2 l2
2 4 12 M 4.0 5 14 30 0.97 20202200015080
20202200015081
20202200015082
20202200015083
20202200015084
20202200015085
20202200015086
3 6 14 M 4.0 7 14 35 1.41
4 8 17 M 5.0 7 17 40 2.45
5 10 21 M 5.0 8.5 17 50 2.91
6 12 25 M 6.0 10 23 60 5.00
8 17 31 M 8.0 14 25 75 10.63
10 21 35 M 10.0 16 32 84 17.13
Nominal
size
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
d1 h1 a
2 M3
M4
M4
M5
M5
M6
M8
M10
M12
M12
M14
17
20
22
24
28
34
42
55
63
75
85
4
5
6
6
8
10
12
15
18
21
24
0.69
1.20
1.30
1.40
1.72
4.10
5.89
13.0
21.0
28.0
40.0
20202200015063
20202200015064
20202200015065
20202200015066
20202200015067
20202200015068
20202200015069
20202200015070
20202200015071
20202200015072
20202200015073
3
4
5
6
8
10
12
16
19
22
l 2
b 2b 1
Stainless Steel Simplex Clipwith 1 Bolt
Stainless Steel Duplex Clipwith 2 Bolts
d
h2
h1
Material: A4Finish: polished
Material: A4Finish: highly polished
d
h2
h1
Stainless Steel Wire Rope Clip,light Version
Similar DIN 741Material: A4Finish: polished
h 1
d1
a
d
Nominal
size
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
a b1 b2 d h1 h2 l
2 9 4 13 M 3 18 11 14 0.8 20202200015050
20202200015051
20202200015052
20202200015053
20202200015054
20202200015055
20202200015056
20202200015057
20202200015058
20202200015059
20202200015060
20202200015061
20202200015062
3 12 5 16 M 4 25 12 17 1.5
4 13 6 18 M 4 25 14 19 2.9
5 15 7 20 M 5 29 15 24 3.1
6 18 8 21 M 6 31 17 27 4.0
8 23 10 27 M 8 41 21 34 7.7
10 28 12 34 M 10 52 25 45 17.0
12 35 14 38 M 12 61 28 51 26.5
14 42 15 43 M 12 68 32 53 31.0
16 42 18 47 M 14 76 36 60 50.0
19 50 20 51 M 14 79 40 62 58.0
22 60 26 61 M 16 98 46 72 80.0
25 62 29 61 M 16 110 49 76 108.0
Stainless Steel Wire Rope Clip,heavy Version
Similar DIN 741Material: A4Finish: polished
STAINLESS STEEL PRODUCTSWire Rope Clips
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
Carl Stahl DIRECT International No. 6 I 491
* Load capacity = 20% of breaking load
Load
cap.
in t*
Nominal
size
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
A L B B1 L1
bd
w l
b
d
l
w
m
Nominal
size
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
b d l m w
50 x 5 8 5 50 7 5 1.90 25302010015019
25302010015020
25302010015021
25302010015022
25302010015023
25302010015024
60 x 6 9 6 60 8 6.5 2.70
70 x 7 10 7 70 8 8 4.40
80 x 8 12 8 80 10 8.5 6.50
100 x 10 15 10 100 11 10.5 12.70
120 x 11 18 11 120 16 11.5 18.00
Nominal
size
Dimensions
in mm
Weight
in kg/
100 pcs
Item no.
l b w d
Stainless Steel Swivelwith 2 Eyes
Stainless Steel Quick Link
Stainless Steel Snap Hook
This product must not be used forlifting and transport of loads!
This product must not be used forlifting and transport of loads!
Material: A4Finish: highly polishedMarking: Manufacturer’s mark,load capacity (WLL/kg)
Material: A4Finish: highly polishedMarking: Manufacturer’s mark
Form CMaterial: A4, spring A2Finish: highly polished
This product must not be used forlifting and transport of loads!
Also available as eye hook!
Nominal
size
Load
cap.
in kg
Dimensions
in mm
Weight
in kg
Item no.
A B D L L1 M
1/4 300 20 12 7 119 22 16 0.190 25302010015039
25302010015040
25302010015041
25302010015042
5/16 500 28 14 8.5 141 28 19 0.330
3/8 700 28 16 10 170 28 20 0.530
1/2 1000 32 20 13 199 36 30 1.040
Stainless Steel Safety Carbine Hook
Material: A4Finish: highly polished
STAINLESS STEEL PRODUCTSHooks, Swivels
This product must not be used forlifting and transport of loads!
0.17 5 5 60 23 13 13 3.30 20202000015049
20202000015050
20202000015051
20202000015052
20202000015053
20202000015054
0.25 6 6 65 27 15 15 5.50
0.65 8 8 90 36 20 22 14.80
1.00 10 10 115 44 24 27 26.70
1.40 13 13 154 58 32 32 57.40
2.50 16 16 188 71 39 42 101.30
4 32 12 6 4 1.25 25302010015025
25302010015026
25302010015027
25302010015028
25302010015029
25302010015030
5 39 13 6.5 5 2.20
6 45 14 7.5 6 3.60
7 52 16 9.0 7 5.00
8 58 18 10.0 8 7.80
10 69 21 12.0 10 13.80
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
Carl Stahl DIRECT International No. 6 I 493
Load
capacity
in t
Nominal
size
Load
cap.
F1
in kg
Dimensions
in mm
Weight
in. kg/
100 pce
Item no.
B C D E
0.08 M6 80 8 13 20 36 6.00 25250000015018
25250000015019
25250000015020
25250000015021
25250000015022
25250000015023
25250000015024
0.14 M8 140 8 13 20 36 6.00
0.23 M10 230 10 17 25 45 11.00
0.34 M12 340 12 20.5 30 53 18.00
0.70 M16 700 14 27 35 62 28.00
1.20 M20 1200 16 30 40 71 45.00
1.80 M24 1800 20 36 50 90 74.00
F1
EC
B
D
F1
E
B
D
Load
capacity
in t
Nominal
size
Load
cap.
F1
in kg
Dimensions
in mm
Weight
in kg/
100 pce
Item no.
B D E
0.08 M6 80 8 20 36 5.00 25250000015042
25250000015043
25250000015044
25250000015045
25250000015046
25250000015047
25250000015048
0.14 M8 140 8 20 36 5.00
0.23 M10 230 10 25 45 9.00
0.34 M12 340 12 30 53 16.00
0.70 M16 700 14 35 62 24.00
1.20 M20 1200 16 40 71 36.00
1.80 M24 1800 20 50 90 72.00
Stainless Steel Eye Bolt, Material A4, DIN 580
Stainless Steel Eye Nut, Material A4, DIN 582
Precisely drop-forgedMaterial: A4Finish: highly polishedMarking: Manufacturer’s mark, loadcapacity (WLL/kg)
Load capacity (WLL/kg) indicated onthe eye nuts must not be exceeded!
Precisely drop-forgedMaterial: A4Finish: highly polishedMarking: Manufacturer’s mark, loadcapacity (WLL/kg)
Load capacity (WLL/kg) indicated onthe eye nuts must not be exceeded!
STAINLESS STEEL PRODUCTSWeld-on Lifting Points, Weldable
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
494 Carl Stahl DIRECT International No. 6 I
Electric chain hoists with stainless steel chain
Custom-made stainless steel load suspension equipment
These electric chain hoists can be fitted with stainless steel hook and chain. Please be aware that this will reduce the load capacity. This conversion isonly possible for hoists with a single chain fall. Prices and capacities on request.
STAINLESS STEEL PRODUCTSAccessories
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
Carl Stahl DIRECT International No. 6 I 495
With bent lifting eye as single point suspension, suitable for cranehook according to DIN 15401 with adjustable, flame-cut safetyhooks.
Load capa-
city in kg
Working width max./ min.L
in mm
Headroom h
in mm
Eye size
in mm
Weight
in kg
Item no.
500 500 / 370 290 50 x 90 9 25302400035086
500 850 / 250 290 50 x 90 12 25302400035099
500 1850 / 850 290 50 x 90 22 25302400035100
1000 850 / 250 290 50 x 90 11 25302400035101
1000 1850 / 850 290 50 x 90 24 25302400035102
1000 2850 / 1350
Adjustment grid R
in mm
1 x 65
3 x 100
5 x 100
3 x 100
5 x 100
6 x 125 290 50 x 90 48
Lifting Beam in modular Design, Stainless Steel Version
25302400035104
Lmin. = min. working width
Lmax. = max. working width
R
h
L1
L2
h
50
25
60With four load acceptance pointswith safety latches.Special versions e.g. low head-room, eccentric lifting eye etc. on request
Load
capacity
in kg
Working width
L1 x L2
in mm
Headroom h
in mm
Eye size
in mm
Weight
ca.
in kg
Item no.
1000 1000 x 1000 90 70 x 90 40 25302400015272
25302400015273
25302400015274
1500 1000 x 1000 90 70 x 90 40
2000 1000 x 1000 90 60 x 90 47
Lifting Beam for Big Bag Transport, Stainless Steel Version
STAINLESS STEEL PRODUCTSLifting Beams
https://rodavigo.net/es/c/almacenaje-y-movimiento/maquinaria-utiles-de-manutencion/elevacion-traccion-de-cargas
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - rodavigo@rodavigo.com
Servicio de Att. al Cliente+34 986 288118
top related